I'm struggling with something that should be fairly easy I think. I have a few docs that are already tagged, but these should be redone. I have all scripts up and running to renew tags, so that's fine, but up till now I'm removing all tags by selecting them in the structure pane and selecting the untag command before running my scripts.
Obviously I want to do this with script, I found that I need to use associatedXMLElements.untag(); but I can't make it work...
Can someone help me with the script ? I simply want to remove every tag, so the document is again as blank as when it was originally made (only root element)...
The everyItem() collection method can often be used equivalent to a loop.
Therefor to iterate all (open) documents, keep the root element but untag everything below, just do the following:
app.documents.everyItem().xmlElements.item(0).xmlElements.everyItem().untag();
Related
I'm using Cypress to write automated tests. This is for a codebase I have no control over, so I can't make any changes to the app itself.
I'm attempting to run a .each loop to run through a set of collapsible fields to verify the data in each of them is correct. The fields list medical problems and associated data. The issue is that there are two lists of fields, one for active problems, and one for resolved problems, where the only difference between them is the data-cy tags. Those are the only unique identifiers for these elements, so I have to use the data-cy tags to select these without selecting other elements in the same container.
I'd be able to run the exact same .each function on both sets of elements, but I currently can't due to the elements not having the same data-cy tags. Is it possible for me to to have the Cypress .get call search for elements with one of two properties? Something like the following:
cy.get('[data-cy="problem-entry"]' OR '[data-cy="resolved-problem"]')
EDIT: Also, to clarify - I am currently able to get the test to behave by just duplicating the .each loop, once for each data-cy tag. Since the loop is several hundred lines of code, I want to remove the redundancy to clean this up a bit.
This answer is not perfect fix, but may work in your case: if these selectors are the only data-cy with the word "problem" in their value, you could do something like this:cy.get('[data-cy*="problem"]'). This will choose any data-cy which contains word "problem".
If that is not the case, I would like to address your "EDIT" message: you may put the whole code (several hundred lines) in a Cypress custom command and then call it, so instead of copying the code and calling it twice, you would just call your custom command twice (one line each).
I've got a rather large asciidoc document that I translate dynamically to PDF for our developer guide. Since the doc often refers to Java classes that are documented in our developer guide we converted them into links directly in the docs e.g.:
In this block we create a new
https://www.codenameone.com/javadoc/com/codename1/ui/Form.html[Form]
named `hi`.
This works rather well for the most part and looks great in HTML as every reference to a class leads directly to its JavaDoc making the reference/guide process much simpler.
However when we generate a PDF we end up with something like this on some pages:
Normally I wouldn't mind a lot of footnotes or even repeats from a previous page. However, in this case the link to Container appears 3 times.
I could remove some of the links but I'd rather not since they make a lot of sense on the web version. Since I also have no idea where the page break will land I'd rather not do it myself.
This looks to me like a bug somewhere, if the link is the same the footnote for the link should only be generated once.
I'm fine with removing all link footnotes in the document if that is the price to pay although I'd rather be able to do this on a case by case basis so some links would remain printable
Adding these two parameters in fo-pdf.xsl remove footnotes:
<xsl:param name="ulink.footnotes" select="0"></xsl:param>
<xsl:param name="ulink.show" select="0"></xsl:param>
The first parameter disable footnotes, which triggers urls to re-appear inline.
The second parameter removes urls from the text. Links remain active and clickable.
Non-zero values toggle these parameters.
Source:
http://docbook.sourceforge.net/release/xsl/1.78.1/doc/fo/ulink.show.html
We were looking for something similar in a slightly different situation and didn't find a solution. We ended up writing a processor that just stripped away some of the links e.g. every link to the same URL within a section that started with '==='.
Not an ideal situation but as far as I know its the only way.
I'm trying to fix the Magento search issue where 'OR' is used for comparison of multiple search terms instead of 'AND'.
I've seen quite a number of suggestions on the web regarding how to fix this, and the general idea is as follows:
Copy
app/code/core/Mage/CatalogSearch/Model/resource/Fulltext.php to
app/code/local/Mage/CatalogSearch/Model/resource/Fulltext.php and in the copy, change the instances of 'OR' to 'AND', where the SQL queries are built.
However, my changes don't seem to work as expected and what is even more confusing is that the prepareResult() method (which is where the SQL changes above are made) doesn't even seem to run at all when searches are done. I've tested this by putting some debugging code in the function.
I've used the same debug code to verify that the file gets loaded. But the debug code doesn't run when inserted at the prepareResult() function. (The debug code basically writes to a file on disk).
What am I missing here?
Kindly note that this is not so much about the right way to accomplish the end goal of fixing Magento search. I'm aware it's best done via an extension. I'd just like to figure out why prepareResult() isn't being called as expected.
I would like to create a plugin which preprocesses content like markdown before it is passed to marked.
I don't want to create yet another extension to tack on the filename but would rather just search for a pattern in the content and if found do a substitution before marked has a chance to render.
I tried using the render event but my plugin seems to fire after marked even though its name sorts below it. What order do the plugins get used in?
I also tried using a renderBefore event but I can't figure out how to manipulate the content from there.
Any help would be appreciated.
Thanks in advance!
Jeff
Adding a plugin.priority will affect the order in which plugins are called with greater priorities being executed first.
The default plugin priority is 500.
I have a WebHelp content directory created using RoboHelp 9. From a web application, I'm trying to display a specific help page using their CSH JavaScript API:
RH_ShowHelp(0, "WebHelp/index.htm>MainWindow", HH_HELP_CONTEXT, <some map id>);
The problem is, the resultant popup always displays the first help topic, regardless of the map id I pass. Does the map file that was created for the RoboHelp project need to be included somewhere in the resultant WebHelp directory? I would think that RoboHelp would handle including whatever it needed in the generated content.
I think what's more likely is that I messed up somewhere in generating the map file/ids. To generate the map ids, I did the following:
Created a new map file
Double clicked it to open the map file window
Selected everything from the right list block (all the topics and help sections)
Clicked 'Auto Generate'
Are there further steps I need to follow before CSH will work?
Perhaps you forgot to include your mapfile in the generated output.
This is done in Web Help, under Content Categories.
Then, you can specify the topic number in the last argument to RH_ShowHelp.
Are you using the published output (not the generated output) in your content directory?
If that doesn't help, you can use simple links like this, which open the specified topic in help in the Help framework:
http://example.com/WebHelp/index.htm#someSubfolderThatIsAChildOfTheRootHelpFolder/theTopicYouWant.htm