I recently installed Owncloud 4.5 (beta) and on 4.0.7 (latest stable) on Bitnami LAMP stack as amazon ec2.
after installation I've been trying to use the external storage app to mount a backet from S3, FTP, or dropbox. in all of the cases soon as I set up the configurations in the app, the mount folder disappear from the client's browser. when I ssh and look the folders are still there.
only thing that works is the option to mount local folders.
I did try to change permissions and ownership of those folders but that not seems to be the case.
posted on forum.owncloud.org as well, but no one seems to answer.
Did anyone seen this problem before?
Thank you!
Related
I've been here before and even wrote an article on how I was able to connect Coldfusion 2018 with Mac OS X Mojave, but since the upgrade to Mac OS X 10.15 Catalina, I haven't been able to get Coldfusion to work correctly on virtual hosts (ie. http://local.mylocalsite.com).
Goal: install Apache connector for Coldfusion so that I can run my dev site from within the /Sites folder like I would any other site.
Problem: Apache is working and I can access websites from the /Sites folder using the virtual host (ie. local.mydevsite.com), but although Coldfusion is running (I can access the Coldfusion Administrator), my computer does not seem to recognize that Coldfusion is supposed to run. I don't know if this is Apache or Coldfusion's responsibility.
What I've tried: I've tried using the GUI connector, as well as trying to confirm the settings via command line. I have XAMPP installed, which I believe that DesktopServer (an application by ServerPress) is relying on, but that's probably not relevant; but what I'm getting at is that I believe XAMPP relies on Mac's default installation of Apache.
I've also tried to go into every file that is referenced in any instruction document to determine if there is anything out of place. Part of my confusion is that there are many instances of some of these files and I'm not sure which one is active. Here are some of the files I've looked into:
/Applications/XAMPP/xamppfiles/etc/extra/httpd-vhosts.conf
/Applications/XAMPP/xamppfiles/apache2/conf/httpd.conf
/Applications/XAMPP/xamppfiles/apache2/conf/mod_jk.so
/private/etc/apache2/httpd.conf
/private/etc/apache2/mod_jk.conf
/private/etc/apache2/extra/httpd-vhosts.conf
From what I can tell, the main settings for Apache are stored in the /private/etc/apache2 folder, but I want the XAMPP version of https-vhosts.conf because that's where DesktopServer is pulling their virtual hosts from. Regardless, I don't think it matters which vhosts file is being used because Coldfusion won't run on any of the local sites from my /Sites folder that are loading correctly when I visit local.anylocaldevsite.com.
Thoughts? This is either a really dumb question because no one else is asking it, or there aren't many Mac users who also use Coldfusion. Would love assistance if anyone has a clue. Thanks!
Update: This isn't an exact answer, but the recommendation to try CommandBox was a win. I installed CommandBox and then ran the "ColdBox" application in the root of my project and the site opened up in my browser like a gem. Wonderful. Thank you! I can call that the "answer" if no one objects, but I know that it's more of a workaround than an exact fix.
I have recently installed MAMP and phpMyAdmin on my laptop which is currently running macOS Sierra. I have followed various online tutorials on how to configure phpMyAdmin but the one thing I haven't been able to figure out is how to save a configuration.
From what I read I'm supposed to create a folder named config in the root folder of phpMyAdmin. I did just that and I also gave the folder full permisions for user group and others just to be safe. However, it didn't work and I still find myself having to reconfigure phpMyAdmin every time I restart my computer. I also tried to change the ownership of the folder in question but that didn't work either.
Any help would be greatly appreciated. Thank you!
I have set up and my wordpress site on homestead. I have windows machine running it and it works nicely, i can access my configured URL when i edit hosts file. Now i want to access the domain from different windows machine that relies in the same network but this time editing hosts file does not work, it simply cant resolve it and times out. Is it even possible to do that? I would prefer if i can get it working with hosts file and not using vagrant share or similar service like that.
Thanks in advance!
I had the same problem accessing my homestead install across the network until I recently discovered I could perform a Network Preview for my Prepros projects (https://prepros.io/).
Homestead files are mapped to your local computer; adding them to prepros projects will give indirect access to your homestead website.
Its been working quite well for me.
I have an issue with mounting Windows file share in Cygwin.
We have Windows file share which is using NFS to share content. I was assigned to install Cygwin on it so some application can connect over SFTP to that server.
Now they need to access the shared folder from that application and the app would pull data from that folder.The thing is that the folder is Windows shared folder (exmple; \server\photos). the current Windows users need to be able to connect to that share (it is mapped to their M drive) and the app need to connect to SFTP and pull the data from there.
My idea was to mount that NFS share in Cygwin and set it as /home directory so when the app connects, it automatically goes there.
My questions are: is this possible, and does anyone know any better solutions?
I am open for all suggestions.
Thank you.
Cygwin views the top of its directory tree / to be within the Windows directory C:\cygwin64 (or whatever its installation directory was). As a result, you are unable to move above that point in the filesystem from a Cygwin shell. The solution is to go through Cygwin's directory /cygdrive, which is automatically set up as the access point where all Windows disk drives are mounted. If your shared folder is mounted in Windows as M:, you should be able to access it in Cygwin as /cygdrive/m without any additional work.
As far as setting it up as /home, you might be able to create a symbolic link from /home to /cygdrive/m if that is what you need.
Perforce is downloading files to the external hard-drive connected to my MacBookPro as writable ("777"). It's as if the "allwrite" option is set in my workspace, but it's not.
I thought Perforce was supposed to mark the files read-only until I check them out. Is there a setting somewhere I missed?
Rev. P4V/MACOSX104U/2009.2/236331
MacBookPro OSX 10.5.8
Is your external hard-drive formated as hfs+? If it's FAT32, it will be 777 anyway.
Have you checked if Windows thinks the files are read only after syncing with the Mac client?
Perforce does not like it when you access the same disk location from two different workspaces, nor the same workspace from two different hosts. This is because the server tracks the state of the files on the client; you're begging for your local store to lose synchronization with the depot.
What are you really trying to accomplish here?
I would recommend that you forget about FAT32; put your Windows workspace on an NTFS volume and your Mac workspace on an HFS+ volume. Submit & sync to share the data. Storage is cheap.