I've just installed RVM on ArchLinux x64 in single user mode via the recommended install script
curl -L https://get.rvm.io | bash -s stable
I've also installed all the requirements listed in rvm requirements
However, I'm having trouble actually installing any version of ruby. And getting the following error:
arch:~ % rvm install 1.9.3
No binary rubies available for: ///ruby-1.9.3-p194.
Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies.
Fetching yaml-0.1.4.tar.gz to /home/christopher/.rvm/archives
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 460k 100 460k 0 0 702k 0 --:--:-- --:--:-- --:--:-- 767k
Extracting yaml-0.1.4.tar.gz to /home/christopher/.rvm/src
Prepare yaml in /home/christopher/.rvm/src/yaml-0.1.4.
Configuring yaml in /home/christopher/.rvm/src/yaml-0.1.4.
Error running ' ./configure --prefix=/home/christopher/.rvm/usr ', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/configure.log
Compiling yaml in /home/christopher/.rvm/src/yaml-0.1.4.
Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/make.log
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Installing Ruby from source to: /home/christopher/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)...
ruby-1.9.3-p194 - #downloading ruby-1.9.3-p194, this may take a while depending on your connection...
ruby-1.9.3-p194 - #extracting ruby-1.9.3-p194 to /home/christopher/.rvm/src/ruby-1.9.3-p194
ruby-1.9.3-p194 - #extracted to /home/christopher/.rvm/src/ruby-1.9.3-p194
Skipping configure step, 'configure' does not exist, did autoreconf not run successfully?
ruby-1.9.3-p194 - #compiling
Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/make.log
There has been an error while running make. Halting the installation.
The log files are as follows:
arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/configure.log
__rvm_log_command:32: permission denied:
arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/make.log
make: *** No targets specified and no makefile found. Stop.
arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/make.log
make: *** No targets specified and no makefile found. Stop.
I'm having this same problem on two machines running Mac OS 10.6.8.
I was able to fix the yaml problem by manually cd-ing into the directory and running ./configure. eg:
$ cd /home/christopher/.rvm/src/yaml-0.1.4
$ ./configure --prefix=/home/christopher/.rvm/usr
After running "rvm install 1.9.3" a couple more times, it picked up the configuration I'd done, and stopped bothering me about the yaml issue.
I was also able to cd into the ruby directory and configure and make it. eg:
$ /home/christopher/.rvm/src/ruby-1.9.3-p194
$ ./configure
$ make
$ make install
...However, this didn't cause rvm to pick it up. I'm guessing I was missing some necessary command line options and flags.
But considering I was able to get as far as I did, it seems to me like it's an rvm bug.
Related
Using a [fairly vanilla] OpenBSD 6.0 x64 VM to try out RVM. I follow the instructions on how to install RVM and do the following:
# curl -sSL https://get.rvm.io | bash -s stable --ruby
ksh: bash: not found
ksh: curl: not found
# pkg_add curl bash
quirks-2.241 signed on 2016-07-26T16:56:10Z
curl-7.49.0:libidn-1.32p1: ok
curl-7.49.0: ok
bash-4.3.46: ok
# curl -sSL https://get.rvm.io | bash -s stable --ruby
Trying to install GNU version of tar, might require sudo password
quirks-2.241 signed on 2016-07-26T16:56:10Z
gtar-1.29: ok
Downloading https://github.com/rvm/rvm/archive/1.28.0.tar.gz
Downloading https://github.com/rvm/rvm/releases/download/1.28.0/1.28.0.tar.gz.asc
curl: (22) The requested URL returned error: 404 Not Found
Could not download 'https://github.com/rvm/rvm/releases/download/1.28.0/1.28.0.tar.gz.asc'.
curl returned status '22'.
Creating group 'rvm'
Installing RVM to /usr/local/rvm/
Installation of RVM in /usr/local/rvm/ is almost complete:
* First you need to add all users that will be using rvm to 'rvm' group,
and logout - login again, anyone using rvm will be operating with `umask u=rwx,g=rwx,o=rx`.
* To start using RVM you need to run `source /etc/profile.d/rvm.sh`
in all your open shell windows, in rare cases you need to reopen all shell windows.
# Administrator,
#
# Thank you for using RVM!
# We sincerely hope that RVM helps to make your life easier and more enjoyable!!!
#
# ~Wayne, Michal & team.
In case of problems: https://rvm.io/help and https://twitter.com/rvm_io
rvm 1.28.0 (latest) by Wayne E. Seguin , Michal Papis [https://rvm.io/]
Searching for binary rubies, this might take some time.
No binary rubies available for: openbsd/6.0/x86_64/ruby-2.3.3.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Checking requirements for openbsd.
WARNING: $PKG_PATH was not set, using fallback 'http://ftp.openbsd.org/pub/OpenBSD/6.0/packages/amd64/',
see http://www.openbsd.org/ftp.html for list of available mirrors.
Installing requirements for openbsd.
Updating system.
Installing required packages: gcc-4, automake-1, libtool, bison, readline-6, libyaml-0.
Requirements installation successful.
Found user configured '-j' flag in 'rvm_make_flags', please note that RVM can detect number of CPU threads and set the '-j' flag automatically if you do not set it.
Installing Ruby from source to: /usr/local/rvm/rubies/ruby-2.3.3, this may take a while depending on your cpu(s)...
ruby-2.3.3 - #downloading ruby-2.3.3, this may take a while depending on your connection...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 13.7M 100 13.7M 0 0 3734k 0 0:00:03 0:00:03 --:--:-- 4000k
ruby-2.3.3 - #extracting ruby-2.3.3 to /usr/local/rvm/src/ruby-2.3.3....
ruby-2.3.3 - #configuring..........................................................
ruby-2.3.3 - #post-configuration.
ruby-2.3.3 - #compiling................................................................................................
ruby-2.3.3 - #installing........
ruby-2.3.3 - #making binaries executable..
ruby-2.3.3 - #downloading rubygems-2.6.8
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 736k 100 736k 0 0 1087k 0 --:--:-- --:--:-- --:--:-- 1089k
ruby-2.3.3 - #extracting rubygems-2.6.8....
ruby-2.3.3 - #removing old rubygems.........
$LANG was empty, setting up LANG=en_US.UTF-8, if it fails again try setting LANG to something sane and try again.
ruby-2.3.3 - #installing rubygems-2.6.8.
Error running 'env GEM_HOME=/usr/local/rvm/gems/ruby-2.3.3#global GEM_PATH= /usr/local/rvm/rubies/ruby-2.3.3/bin/ruby -d /usr/local/rvm/src/rubygems-2.6.8/setup.rb --no-docu ment',
showing last 15 lines of /usr/local/rvm/log/1482173449_ruby-2.3.3/rubygems.install.log
[2016-12-19 13:56:46] /usr/local/rvm/rubies/ruby-2.3.3/bin/ruby
current path: /usr/local/rvm/src/rubygems-2.6.8
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/sbin:/usr/local/bin:/usr/local/rvm/bin
command(7): env GEM_HOME=/usr/local/rvm/gems/ruby-2.3.3#global GEM_PATH= /usr/local/rvm/rubies/ruby-2.3.3/bin/ruby -d /usr/local/rvm/src/rubygems-2.6.8/setup.rb --no-documen t
ruby: can't load library 'libruby.so.2.30'
First, I tried to install RVM using the same procedure on one of our OpenBSD 5.8 development machines as a local user and got the same issue. I decided to try it on a newer VM as root which is what I show above. Both cases 'libruby.so.2.30' exists either locally (~/.rvm/rubies/ruby-2.3.0/lib/libruby.so.2.30) for the user or in /usr/local/rvm/rubies/ruby-2.3.3/lib for the case I show above.
If I try to add the path to the linker config using ldconfig and manually execute the failing command :
# ldconfig /usr/local/lib /usr/local/rvm/rubies/ruby-2.3.3/lib
# cd /usr/local/rvm/src/rubygems-2.6.8
# env GEM_HOME=/usr/local/rvm/gems/ruby-2.3.3#global GEM_PATH= /usr/local/rvm/rubies/ruby-2.3.3/bin/ruby -d /usr/local/rvm/src/rubygems-2.6.8/setup.rb --no-document
Exception `LoadError' at /usr/local/rvm/rubies/ruby-2.3.3/lib/ruby/site_ruby/2.3.0/rubygems.rb:1345 - cannot load such file -- rubygems/defaults/operating_system
Exception `LoadError' at /usr/local/rvm/rubies/ruby-2.3.3/lib/ruby/site_ruby/2.3.0/rubygems.rb:1354 - cannot load such file -- rubygems/defaults/ruby
Exception `LoadError' at /usr/local/rvm/rubies/ruby-2.3.3/lib/ruby/site_ruby/2.3.0/rubygems/core_ext/kernel_require.rb:55 - cannot load such file -- did_you_mean
Exception `LoadError' at /usr/local/rvm/rubies/ruby-2.3.3/lib/ruby/site_ruby/2.3.0/rubygems/core_ext/kernel_require.rb:135 - cannot load such file -- did_you_mean
... lots of stdoutput regarding RubyGems changelog...
It seems the library has been built and it can execute the command (with errors, but the binary works) which probably has something to do with me executing this stuff out of the context of the script itself I assume.
This is a scripted install. It seems that RVM should be setting up something for the linker to know about the existence of these libraries (it created them in the first place), but it doesn't appear to be working out.
Is this a bug with RVM on OpenBSD or it is something I am not doing correctly?
On attempting to update Ruby version I get a failure with some dependencies. The output of which is copied below. I need to correct this situation or perform a time machine restore (ideally without rolling back my entire system).
What would be the best way to recover from this situation?
Pauls-MacBook-Pro:~ pauldriver$ cd Sites/base/sites/all/themes/primal/
ruby-1.9.3-p551 is not installed.
To install do: 'rvm install ruby-1.9.3-p551'
Pauls-MacBook-Pro:primal pauldriver$ rvm list
rvm rubies
=* ruby-1.9.3-p547 [ x86_64 ]
# => - current
# =* - current && default
# * - default
Pauls-MacBook-Pro:primal pauldriver$ rvm install ruby-1.9.3-p551
Searching for binary rubies, this might take some time.
No binary rubies available for: osx/10.10/x86_64/ruby-1.9.3-p551.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Checking requirements for osx.
Installing requirements for osx.
Updating system.....
Installing required packages: gcc48.....
Error running 'requirements_osx_brew_libs_install gcc48',
showing last 15 lines of /Users/pauldriver/.rvm/log/1417181615_ruby-1.9.3- p551/package_install_gcc48.log
++ case "$1" in
++ [[ -t 1 ]]
++ return 1
++ printf %b 'There were package installation errors, make sure to read the log.
Try `brew tap --repair` and make sure `brew doctor` looks reasonable.
Check Homebrew requirements https://github.com/Homebrew/homebrew/wiki/Installation\n'
There were package installation errors, make sure to read the log.
Try `brew tap --repair` and make sure `brew doctor` looks reasonable.
Check Homebrew requirements https://github.com/Homebrew/homebrew/wiki/Installation
++ case "$_system_version" in
++ return 1
Requirements installation failed with status: 1.
Pauls-MacBook-Pro:primal pauldriver$
It seems that my problem was connected with gcc48 and some confusion with an earlier version.
I eventually found a solution via the following stackoverflow post Error installing Ruby in Yosemite
I am trying to install Ruby Version Manager (RVM) without success.
How to get through this error I am getting?
ubuntu#ip-172-31-0-20:/tmp$ rvm install ruby-1.9.3-p484
Searching for binary rubies, this might take some time.
No binary rubies available for: ubuntu/14.04/x86_64/ruby-1.9.3-p484.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Checking requirements for ubuntu.
Requirements installation successful.
Installing Ruby from source to: /usr/local/rvm/rubies/ruby-1.9.3-p484, this may take a while depending on your cpu(s)...
ruby-1.9.3-p484 - #downloading ruby-1.9.3-p484, this may take a while depending on your connection...
Warning: Failed to create the file ruby-1.9.3-p484.tar.bz2.part: Permission
Warning: denied
0 9806k 0 1002 0 0 22905 0 0:07:18 --:--:-- 0:07:18 23302
curl: (23) Failed writing body (0 != 1002)
There was an error(23).
Checking fallback: http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p484.tar.bz2
Warning: Failed to create the file ruby-1.9.3-p484.tar.bz2.part: Permission
Warning: denied
0 9806k 0 1167 0 0 4300 0 0:38:55 --:--:-- 0:38:55 4290
curl: (23) Failed writing body (0 != 1167)
There was an error(23).
Failed download
There has been an error fetching the ruby interpreter. Halting the installation.
ubuntu#ip-172-31-0-20:/tmp$
Your RVM is installed in /usr/local/rvm - it's often called system installation, this requires that your user ubuntu will be added to rvm group:
rvm group add rvm "$USER"
yes use $USER it will be replaced by your shell with your user name
then log out and log in, ensure with:
id
that your user is in rvm group,
finally just in case update permissions for RVM:
rvm fix-permissions
The solution by #mpasis might not work if you're installing rvm using ubuntu_rvm as by default because of copy+paste it'll be installed as root.
Try installing rvm with without sudo or with curl as explained on rvm.io.
I am running this command on Linux Mint 14 Mate:
rvm pkg install ree_dependencies --verify-downloads 1
and I get this error:
Fetching ncurses-5.7.tar.gz to /home/john/.rvm/archives
Extracting ncurses to /home/john/.rvm/src/ncurses-5.7
Prepare ncurses in /home/john/.rvm/src/ncurses-5.7.
Error running 'autoreconf -is --force', please read /home/john/.rvm/log/ncurses/autoreconf.log
Configuring ncurses in /home/john/.rvm/src/ncurses-5.7.
Error running './configure --prefix=/home/john/.rvm/usr --with-shared --disable-rpath --without-debug --without-ada --enable-safe-sprintf --enable-sigwinch --without-progs', please read /home/john/.rvm/log/ncurses/configure.log
Compiling ncurses in /home/john/.rvm/src/ncurses-5.7.
Error running 'make', please read /home/john/.rvm/log/ncurses/make.log
and here is the log file:
configure:5967: error: possibly undefined macro: AC_DIVERT_HELP
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1
I googled for the solution, but got nothing.
Your help is highly appreciated.
instead of ree_dependencies you should read output of rvm requirements - it will show you what needs to be installed.
A word of advice - REE is based on Ruby 1.8 which is no longer maintained, only security fixes will be released for few months, you really should try a newer ruby like 1.9.3, or if it's new project - try ruby 2.0.0 preview2:
rvm install ruby-2.0.0
Fetching yaml-0.1.4.tar.gz to /Users/dmonkeys/.rvm/archives
Extracting yaml-0.1.4.tar.gz to /Users/dmonkeys/.rvm/src
Error running 'tar xmzf /Users/dmonkeys/.rvm/archives/yaml-0.1.4.tar.gz -C /Users/dmonkeys/.rvm/src ', please read /Users/dmonkeys/.rvm/log/ruby-1.9.3-p194/yaml/extract.log
Configuring yaml in /Users/dmonkeys/.rvm/src/yaml-0.1.4.
Error running ' ./configure --prefix="/Users/dmonkeys/.rvm/usr" ', please read /Users/dmonkeys/.rvm/log/ruby-1.9.3-p194/yaml/configure.log
Compiling yaml in /Users/dmonkeys/.rvm/src/yaml-0.1.4.
Error running 'make -j2', please read /Users/dmonkeys/.rvm/log/ruby-1.9.3-p194/yaml/make.log
Database file /Users/dmonkeys/.rvm/config/packages does not exist.
Installing Ruby from source to: /Users/dmonkeys/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)...
ruby-1.9.3-p194 - #fetching
ruby-1.9.3-p194 - #extracted to /Users/dmonkeys/.rvm/src/ruby-1.9.3-p194 (already extracted)
ruby-1.9.3-p194 - #configuring
Error running ' ./configure --prefix=/Users/dmonkeys/.rvm/rubies/ruby-1.9.3-p194 --enable-shared --disable-install-doc --with-libyaml --with-opt-dir=/Users/dmonkeys/.rvm/usr ', please read /Users/dmonkeys/.rvm/log/ruby-1.9.3-p194/configure.log
There has been an error while running configure. Halting the installation.
ruby-1.9.3-p194 is not installed.
Creating alias default for ruby-1.9.3-p194.
Recording alias default for ruby-1.9.3-p194.
Creating default links/files
ruby-1.9.3-p194 is not installed.
Could not load ruby ruby-1.9.3-p194.
/Users/dmonkeys/.rvm/scripts/alias: line 133: /Users/dmonkeys/.rvm/rubies/ruby-1.9.3-p194/bin/ruby: No such file or directory
Make sure you have the Xcode "Command Line Tools" package installed. Xcode alone is no longer sufficient.
You can do this by downloading them separately or by enabling that package in the Organizer.
This is the most common case for installation failure. You didn't post the contents of the log that was mentioned in the output you pasted.