I have Xcode 4.5 Developer Preview 1 and now I want to download Xcode 4.6. Before downloading the latest Xcode, I want to clean uninstall the old one. Not sure yet how to do that. But I'm afraid it will interrupt the MacPorts functions. MacPorts needs Xcode Command Line Tools. So is it possible to completely uninstall the old one first and then download the latest version later? I also want to upgrade Xcode 4.5 DP1 to Xcode 4.6 if possible. I installed Xcode 4.5 DP1 from DMG file. I'll install Xcode 4.6 from App Store.
You should upgrade XCode via App Store.
You should be able to upgrade Xcode and the command line tools without problems. MacPorts might not work while you don't have a version of Xcode (and the command line tools) installed, but will start working again after the update.
I begrudgingly updated to Lion from snow leopard. I then updated XCode to 4.3.1 which as part of the update uninstalled 4.2 from snow leopard. I then realized that one of my other dev tools does not work with 4.3.1 at all, so I installed 4.2.1 along side it in the hopes of fixing things. It didn't. How do I remove 4.2.1 so I'm just left with 4.3.1?
I tried deleting 4.3.1 and re-installing hoping it would detect 4.2.1 and remove it like it did when I first upgraded but no dice.
Searching the web shows I need to run uninstall-devtools however I can't find it anywhere, /Developer doesn't exist...
Trying to re-install 4.2.1 in the hopes there was an uninstaller buried in there says "Xcode install assistant can't be installed because xcode is already installed" (it didn't say this the first time obviously) so I can't re-install without 4.3.1 in place in the hopes of getting a /Developer folder...
There appears to be no uninstall-devtools burried in 4.3.1 (and I have command line tools installed as well).
I can't find 4.2.1, maybe it didn't install (I forgot to check disc capacities before/after) but then why can't I try to install it again without any xcode installed?
Install Xcode 4.2.1 again and then uninstall it:
sudo /Developer/Library/uninstall-devtools --mode=all
It turns out that 4.2.1's installer actually installs an Xcode installer into your applications folder, which in turn actually installs Xcode. The solution is find the installed installer (makes so much sense...) and install Xcode an things behave as expected.
The versions of Xcode that support installation into /Applications instead of /Developer in theory support being removed just via dragging to the trash.
In practice, I'm not sure I trust the process, and I wish there was still a more robust cleanup script.
Search "Xcode 4.2" in spotlight or in finder it will find you the app then move it to trash .But dont forget to check version.
When I try and install MacPorts it complains
'Xcode is not installed, or was installed with UNIX Development (10.5+) or Command Line Support (10.4) deselected.'
I do have Xcode installed from the Appstore so I guess I just have to install these extra parts but how ?
Ive read a couple of questions on Stack Overflow about this but I think the answers must be outdated as they do notmake sense for me, I do not have an Xcode dmg I can reinstall from, and I can't see anything useful in /Developer either, or any preferences within Xcode itself.
I only want Xcode for the purposes of using Macports so I'm not familiar with it.
You probably got Xcode 4.1 from the Mac App Store. In that case, you haven't got Xcode 4.1 installed. However, you now have an Xcode installer in your Applications directory.
Spotlight should find it in any case.
The command line tools aren't included in the default install of Xcode anymore.
Goto the Xcode Preferences --> Downloads Pane --> click the Install button beside "Command Line Tools".
If you don't have Xcode installed you can get the command line tools separately as explained here..
http://osxdaily.com/2012/07/06/install-gcc-without-xcode-in-mac-os-x/
The App Store installs the XCode installer, not Xcode itself. The installer is in your applications folder. Run that.
Today, 16 Feb 2012, when I installed Xcode 4 from the App Store, there was no Setup. Just the app installed, because it was Xcode 4.3 !
Make sure that you install Xcode 4.2 with UNIX Devel. to MacPorts works!
To get the Xcode 4.2 go to https://developer.apple.com.
I've installed XCode 4.2 beta but I realize I can't deploy applications on my iOS 3.1.3 device. The previous XCode 4.1 was able to, but it seems I can't install it back.
What I've tried so far:
install XCode 4.1 directly on top of 4.2. XCode 4.2 persisted
delete the Developer folder, install XCode 4.1. Nothing happened, altho the installation went thru
What am I missing ?
I had the same problem and had to run this in Terminal:
sudo /Library/uninstall-devtools --mode=all
This will remove your Development folder and the other bits around your system, so that you can install Xcode from scratch.
I just went through this. "Installing" XCode 4.1 on top of the 4.2 beta doesn't actually do anything other than creating a 4GB "Install Xcode" file in /Applications. Running THAT shows a prompt that the newer version of XCode will be moved to /Developer-4.2 and the old version will be installed in /Developer.
I found the process confusing because I didn't realize right away that I was supposed to run /Applications/Install Xcode.
try to install it in the other directory ie. Developer/Xcode_old/ but then you have to run proper application(from the correct path).
I have currently both versions installed, so that's definitely can be done.
The problem I had was that I downloaded the 4.1 installer from Apple, but the 4.1 installer doesn't actually install XCode 4.1, it installs an installer for XCode 4.1 called "Install XCode"--BUT "Install XCode" already existed for the 4.2 install and it would not apparently overwrite it.
I renamed "Install XCode" to "Install XCode 4.2", reran the XCode 4.1 "installer" which installed a new "Install XCode", this time for 4.1.
(Who came up with this installer for an installer madness?)
I'm just ran the installer for XCode 4.1 (after mv'ing /Developer to /XCode-4.2) and it seems to have worked.
Is it possible to have more than one version of Xcode installed at the same time?
If so, please post any tip, tricks, or potential issues to watch out for.
EDIT:
The reason I want to install multiple versions is to try out the new sdk beta, but if the new Xcode is buggy I want to be able to use the older version for my existing projects.
Yes, you can install multiple versions of Xcode. They will install into separate directories. I've found that the best practice is to install the version that came with your Mac first and then install downloaded versions, but it probably doesn't make a big difference. See http://developer.apple.com/documentation/Xcode/Conceptual/XcodeCoexistence/Contents/Resources/en.lproj/Details/Details.html this Apple Developer Connection page for lots of details. <- Page does not exist anymore!
Can I have multiple Xcode versions installed?
Solution:
Actually as many of the above answers says, it is possible.
Even according to the following Oracle Mobile Platform Blog, you can install more than one XCodes in the same Mac. The reason why you need to do that may vary according to you.
Scenario:
You might have installed only one version of XCode for now. Mostly the one release behind the latest XCode version which is available through App Store (mine I've Xcode 6.3.2 and I needed to keep it and also install Xcode 7 which is available through App Store).
For Ex:-
You have already installed XCode 6.x, and App Store has XCode 7
already given by App Store. For any reason you need to keep that Older
XCode 6.x(as you know it is stable for some time now) and also you
need to install and try out new XCode 7
So number one question might be, How and Where could you download the Mac OS X installable DMG file for XCode 7 (or may be if you wanna try out an older XCode version)? Ok, here is the direct link apple downloads (you might have to log into Apple Developer account before viewing this link correctly), or else following is a StackOverflow Q&A link which gives the answer to where to download DMG files for XCode IDEs.
So now let's assume that you have obtained any of the DMG file for the XCode version you require to install as secondarily?
Steps:
Follow the steps given bellow which I got from the above given first link of Oracles Mobile Platform Blog.
Close Xcode if running
Rename /Applications/Xcode.app to /Applications/Xcode_6.x.app
Enter the admin password when prompted
Double click the DMG file of your required, pre-downloaded Xcode and install it
Once installed it, before running it, change the new
/Applications/Xcode.app that was just installed to (according to my above given example) /Application/Xcode_7.app
Note*:
[Please patiently read this section until the next Note] When you have two versions of Xcode installed, your workstation has two versions of Command Line Tool (xcodebuild) installed too. The question is what your Terminal and Xcode build command will use to when you are building your iOS App. Because along with the Command Line Tool, iOS SDK which is being used to build your app also depends on.
My experience was I've had two Xcode versions. Xcode 10 (Old one with iOS12.0 - iphoneos12.0), and Xcode 10.1 (New one with iOS 12.1 - iphoneos12.1). So obviously the settings for Command Line Tool was selected to use xcodebuild tool from the Old app. I had to manually select it in Xcode preference window.
Where to set Command Line Tool in Xcode Preference Window?
Select the Locations tab and there, you can select all the installed versions of Command Line Tools (which is xcodebuild).
How to figure out which version of iOS SDK is being used to build your iOS App?
On your Terminal issue following command:
$> xcodebuild -showsdks
Above command should print out all the SDK details which your current Xcode configuration uses to build your Apps. And by seeing the results you will understand that your iOS/iphoneos SDK version depends on changing Command Line Tool (xcodebuild) setting on your Xcode.
Note**:
Above given Apple Downloads link and Oracles MPF blog post links might change and/or unavailable in the future.
So I hope that my this answer might be helpful to somebody else out there!
Cheers!
It's easy to have multiple Xcode installs.
In the installer there's a pulldown for the location... you just need to pick a new location when you're installing the beta version.
These instructions from an Apple dev tools evangelist have the full details (Apple dev username/password required):
https://devforums.apple.com/message/40847#40847
Then grab yourself a custom icon for the Beta version of XCode you're using, so you can tell them apart in the dock:
http://iphonedevelopment.blogspot.com/2009/03/multiple-developer-tool-installs.html
You may want to use the "xcode-select" command in terminal to switch between the different Xcode version in the installed folders.
It seems that Xcode really likes to be in the Applications folder and be called Xcode, especially when using xcodebuild (when building for Carthage for example) - and xcode-select doesn't always seem to cut it.
I have a client project that's still using Swift 2.2, and I'm stuck on Xcode 7 for that and using Xcode 8 for anything else.
So, in my Applications folder, I have Xcode 7 (renamed to Xcode_7) and Xcode 8 (renamed to Xcode_8). Then I rename whichever one I need to simply Xcode, and back again when done. It's a ball-ache, but seems to work.
This shell script simplifies it a bit…
xcode-version.sh
cd /Applications
if [[ $1 = "-8" ]]
then
if [ -e Xcode_8.app ]
then
mv Xcode.app Xcode_7.app
mv Xcode_8.app Xcode.app
echo "Switched to Xcode 8"
else
echo "Already using Xcode 8"
fi
elif [[ $1 = "-7" ]]
then
if [ -e Xcode_7.app ]
then
mv Xcode.app Xcode_8.app
mv Xcode_7.app Xcode.app
echo "Switched to Xcode 7"
else
echo "Already using Xcode 7"
fi
else
echo "usage: xcode-version -7/8"
fi
xcode-select --switch Xcode.app
Note that if you use the xcodebuild command line tool, then the last version of Xcode installed will become the default version. (A symbolic link is installed in /usr/bin.) To use the xcodebuild for the other versions of Xcode you'll need to use the version in the (xcode_install_directory)/usr/bin directory.
note To switch between different versions of the Xcode command-line tools, use the xcode-select tool mentioned by other commenters.
Multiple Versions Of Xcode & Simulators using gem Xcode::Install
Install and update your Xcodes automatically.
You can greatly simplify this process by using the
Xcode::Install Ruby Gem.
You should already have a working installation of the
Xcode Command Line Tools and a version of Ruby that supports building native extensions.
I'd suggest using Homebrew for installing
rbenv and use rbenv to install Ruby.
A guide for this can be found here and many other places.
But it should work with the stock Ruby supplied by newer macOS versions as well, if you install the gem either using sudo (not recommended) or using --user-install when installing the gem.
Installation
Basically:
# Install the Ruby Gem (I'm using rbenv, so no sudo or --user-install)
$ gem install xcode-install
# To list available versions:
# PS!You will get prompted for your Apple Developer / iCloud credentials)
# It's using Apple's own API's so 2FA are supported if enabled
$ xcversion list
6.0.1
6.1
6.1.1
6.2 (installed)
6.3
# To update the list of available versions, run:
$ xcversion update
# To install a certain version, simply:
$ xcversion install 8
##################################################################### 100.0%
Please authenticate for Xcode installation...
Xcode 8
Build version 6D570
This should download and install and activate that version of Xcode.
You can start it from /Applications as usual.
The new version will also be automatically selected for CLI commands
To select a different version as active, you'll run:
xcversion select <version_number>
from the list of installed versions, marked as (installed) like:
# To see the active version in use:
$ xcversion selected
# To select and activate an installed version:
$ xcversion select 8
# To select, activate and change the symlink in /Apllications
$ xcversion select 8 --symlink
Other fun stuff, Simulators etc
Xcode::Install can also install Xcode's Command Line Tools by calling
xcversion install-cli-tools
and can also manage your local simulators using the simulators command.
But instead of repeating more information that is probably going to change over time, head over to the project's GitHub page
for more about this gem.
Staring with Xcode 9, the beta Xcode is labeled 'Xcode-beta.app' and is designed to live side by side with the production version. Info can be found in the Xcode release notes here. (Not using direct link because it breaks often).
From Apple:
Xcode 9 beta 4 can coexist with previous versions of Xcode. Prerelease
versions of Xcode are made available from developer.apple.com,
packaged in a compressed XIP file. To install Xcode during the beta
period, download the XIP file, double-click the file to expand it in
place, then drag Xcode-beta.app to the Applications folder
Download a version
The beta and stable releases can be taken from the Developer Software downloads Application tab, here), but older versions can be taken from here. Just extract the .xib and put Xcode-beta.app in your Applications folder.
Switch versions
Using the beta: sudo xcode-select -s /Applications/Xcode-beta.app/Contents/Developer
Using the original: sudo xcode-select -s /Applications/Xcode.app/Contents/Developer
Check version changed
You can validate the version has changed by running xed --version, and it will output the correct version: e.g. xed version 12.5 or xed version 13.0
To have multiple Xcode instances installed you can put them to different folders for example /Developer5.0.2/Xcode, but to use them in CI or build environment(command line) you need to setup some environment variables during the build.
You can have more instructions here.
So it is working not just with beta and fresh release, also it's working for the really old versions, you might need it to use with Marmalade or Unity plugins which is not support the latest Xcode versions yet(some times it's happens).
Whatever advice path you go down, make a copy of your project folder, and rename the external most one to reflect what XCode version it is being opened in.
Your choice on whether you want it to update syntax or not, but the main reason for all this bovver is your storyboard will be altered just by looking. It may be resolved by the time a new reader coming across this in the future, or
All the updates for new version of xcode will be available in appstore if you have installed the version from appstore. If you just paste the downloaded version appstore will show install not update. Hence keep the stable version downloaded from appstore in your applications folder.
To try new beta releases i usually put it in separate drive and unzip and install it there. This will avoid confusion while working on stable version.
To avoid confusion you can keep only the stable version in your dock and open the beta version from spotlight(Command + Space). This will place beta temporarily on dock. But it will make sure you don't accidentally edit your client project in beta version.
Most Important:- Working on same project on two different xcode might create some unwanted results. Like there was a bug in interface builder that got introduced in certain version of xcode. Which broke the constraints. It got fixed again in the next one.
Keep track of release notes to know exactly what are additional features and what are known issues.
First, remove the current Xcode installation from your machine. You can probably skip this step but I wanted to start fresh. Plus — Xcode was behaving a little weird lately so this is a good opportunity to do that.
Install Xcode 8 from the App Store. Make sure project files (.xcodeproj) and workspace files (.xcworkspace) can be opened with the new Xcode installation (remember to select the Later option whenever prompted).
Download the Xcode 7.3.1 dmg file from Apple. Double-tap the newly downloaded dmg file in order to get the standard “Drag to install Xcode in your Applications folder”. Don’t do that. Instead, drag the Xcode icon to the desktop. Change the file name to Xcode 7.3.1. Now drag it to the Applications folder.
Now you have two versions of Xcode installed on your machine. Xcode 7.3.1 and Xcode 8.
Details: Install Xcode 7 & Xcode 8 side by side