I am developing an application in wp7, the application is already been developed in android and iPhone.
Both uses a component sliding panel as they are default in it, now for the same appearance am supposed to use the component gives the same look and feel.
Is that possible to use any combination of components OR any customized dll available for that component OR is there any alternated equivalent component available for this sliding pannel.
The sliding panel i expect is like this Video
My idea is very simple, just use popup with custom animation.
DoubleAnimation anima = new DoubleAnimation();
anima.From = //current position;
anima.To = //slider position;
//animation now proportional to pixel difference
anima.Duration = new Duration(System.TimeSpan.FromMilliseconds(Math.Abs((300))));
//Debug.WriteLine("Duration=" + TimeSpan.FromMilliseconds(Math.Abs((to - from) * 2)));
// Set attached properties
Storyboard.SetTarget(anima, m_Popup);
//Storyboard.SetTargetProperty(anima, new PropertyPath(System.Windows.Controls.Primitives.Popup.WidthProperty));
Storyboard.SetTargetProperty(anima, new PropertyPath(System.Windows.Controls.Primitives.Popup.VerticalOffsetProperty));
// Create storyboard, add animation, and fire it up!
Storyboard storyboard = new Storyboard();
storyboard.Children.Add(anima);
storyboard.Begin();
Related
In a C# Windows Forms app, I have a Form with a Panel with a PictureBox on it. The PictureBox is twice as wide as the Panel and has a graphics drawing in it. On scaling etc. I set AutoScrollPosition to keep the section of interest in the middle of the Panel: no problem. My problem is: when the app starts I want the Panel to show a section in the middle of the drawing, rather than the left hand side.
In the Form constructor I have:
panel1.AutoScroll = true;
panel1.AutoScrollPosition = new Point(100, 0);
textBox1.Text = panel1.AutoScrollPosition.ToString();
But on starting the app, the TextBox shows (0, 0) and the initial scroll position is at the left.
So, for test, I added a button which when pressed also executes:
panel1.AutoScrollPosition = new Point(100, 0);
textBox1.Text = panel1.AutoScrollPosition.ToString();
The TextBox then shows (100, 0) and the panel is scrolled as expected.
I makes no difference whether or not the AutoScrollPosition line is included in the constructor.
What must I do to initialise the scroll position without user interaction?
Finally solved it: you override OnLoad and set AutoScrollPosition in that, e.g.:
protected override void OnLoad(EventArgs e)
{
base.OnLoad(e);
int yScroll = yToCentre - panel1.Height / 2;
panel1.AutoScrollPosition = new Point(0, yScroll);
}
I have a UWP app. I want to be ale to create new windows from the app, but any subsequent window needs to be a specific smaller size compared to the main window. I don't do anything with regards to sizing the main window and let the OS take care of sizing it for me.
I bring up a new window like this:
auto window = CoreApplication::CreateNewView();
window->show();
void NewWindow::show() {
auto currView = ApplicationView::GetForCurrentView();
currView->PreferredLaunchViewSize =
Windows::Foundation::Size(float(options.width), float(options.height));
currView->PreferredLaunchWindowingMode = ApplicationViewWindowingMode::PreferredLaunchViewSize;
currView->SetPreferredMinSize(Size(20,20));
Xaml::Window::Current->Activate();
ApplicationViewSwitcher::TryShowAsStandaloneAsync(
window_->id(),
ViewSizePreference::Default,
window_->parentId(),
ViewSizePreference::Default);
}
When the main window comes up, it comes up just fine. When I click on a button which gets to this function, the new window comes up in the same size as the main window. I reopen the app, but now the main window shows up in the size I wanted the new window to show up in. Then clicking the button to bring up the new window brings up the new window in the size I wanted it in. So I am a bit confused. Am I setting the sizes the right way? Is there anything else glaringly wrong here?
As # Raymond Chen said, PreferredLaunchViewSize set the size when the app launches, it will change the size of your main window. And you can use ApplicationView.TryResizeView method to set the size of new window.
For example:
auto parentView = ApplicationView::GetForCurrentView();
auto newView = CoreApplication::CreateNewView();
newView->Dispatcher->RunAsync(Windows::UI::Core::CoreDispatcherPriority::Normal,
ref new Windows::UI::Core::DispatchedHandler([this,parentView]()
{
int newViewId = 0;
Windows::UI::Xaml::Controls::Frame^ rootFrame = ref new Windows::UI::Xaml::Controls::Frame();
rootFrame->Navigate(Windows::UI::Xaml::Interop::TypeName(MainPage::typeid), nullptr);
Window::Current->Content = rootFrame;
// You have to activate the window in order to show it later.
Window::Current->Activate();
newViewId = ApplicationView::GetForCurrentView()->Id;
IAsyncOperation<bool>^ mytask = ApplicationViewSwitcher::TryShowAsStandaloneAsync(newViewId);
auto deviceEnumTask = concurrency::create_task(mytask);
deviceEnumTask.then([this](bool res)
{
// set the size of new window
ApplicationView::GetForCurrentView()->TryResizeView(Size(600, 320));
});
}));
as the Toolbar or Titlearea on scroll animation feature is referenced in the last section of the Toolbar API, and also in this great video tutorial (starting at about min 45), the animation works well under given circumstances.
I was not able to find any documentation about what these have to be, however I found one circumstance, in which it does not work. Here is a working example to demonstrate the problem:
Form hi = new Form("Title", new BoxLayout(BoxLayout.Y_AXIS));
EncodedImage placeholder = EncodedImage
.createFromImage(Image.createImage(hi.getWidth(), hi.getWidth() / 5, 0xffff0000), true);
URLImage background = URLImage.createToStorage(placeholder, "400px-AGameOfThrones.jpg",
"http://awoiaf.westeros.org/images/thumb/9/93/AGameOfThrones.jpg/400px-AGameOfThrones.jpg");
background.fetch();
Style stitle = hi.getToolbar().getTitleComponent().getUnselectedStyle();
stitle.setBgImage(background);
stitle.setBackgroundType(Style.BACKGROUND_IMAGE_SCALED_FILL);
stitle.setPaddingUnit(Style.UNIT_TYPE_DIPS, Style.UNIT_TYPE_DIPS, Style.UNIT_TYPE_DIPS, Style.UNIT_TYPE_DIPS);
stitle.setPaddingTop(15);
// hi.setLayout(new BorderLayout()); // uncomment this for the animation to break
Container contentContainer = new Container(BoxLayout.y());
contentContainer.setScrollableY(true);
// add some elements so we have something to scroll
for (int i = 0; i < 50; i++)
contentContainer.add(new Label("Entry " + i));
hi.add(contentContainer);
// hi.add(BorderLayout.CENTER, contentContainer); // use this line instead of the above for the animation to break
ComponentAnimation anim = hi.getToolbar().getTitleComponent().createStyleAnimation("Title", 200);
hi.getAnimationManager().onTitleScrollAnimation(anim);
hi.show();
With my current app and the codesample from the Toolbar API (which is roughly adapted here), I found out that the onScrollAnimation event is not being called, when a scroll occurs inside a BorderLayout. Even when I have a separate container, which is not the contentpane itself, and I set setScrollableY(true); to true, the animation works properly. The animation stops working, when this very container is put into Center of the Form, via Borderlayout. in the example above, the layout is exactly the same, as there are no other components in other areas of course, but it breaks the animation.
How to solve this? In my app, I have the need for a BorderLayout but still want to use this cool feature. Also, this is a very un-intuitive feature, if it works for some, but not all layouts. It should be completely layout-agnostic and work in every case.
Thank you.
The adapter is bound to the forms content pane scrolling so it won't work if you have a border layout in here. In that case scrolling isn't detected because the code just isn't aware of the scrolling. It would need to track the scrolling of any component in the UI to detect that scrolling.
as hinted by Shai, the solution is the following:
hi.setLayout(new BorderLayout());
Container contentContainer = new Container(BoxLayout.y());
contentContainer.setScrollableY(true);
// add some elements so we have something to scroll
for (int i = 0; i < 50; i++)
contentContainer.add(new Label("Entry " + i));
hi.add(BorderLayout.CENTER, contentContainer); // use this line instead of the above for the animation to break
ComponentAnimation anim = hi.getToolbar().getTitleComponent().createStyleAnimation("Title", 200);
hi.getAnimationManager().onTitleScrollAnimation(contentContainer, anim);
instead of using the onTitleScollAnimation to just add the animation, provide your own scrollable "body" or content container as the first argument, appended by the animation(s).
My Qt based application has a QMainWindow and another modal widget. This modal widget does not have a restore option. The user is allowed to drag this widget across displays when more than one monitor is available. However, when my widget is large, and the user drags it across to an extended monitor( usually a projector with a very low resolution) the widget is too large for the screen and gets cut.
I want to be able to detect when the user has moved to different screen so that I can resize the widget( and the content within) to fit the new screen's dimension and resolution. Is there any signal that Qt emits for this purpose?
This is probably the function call you are looking for:
http://qt-project.org/doc/qt-5/qdesktopwidget.html#screenNumber
int QDesktopWidget::screenNumber(const QWidget * widget = 0) const
Returns the index of the screen that contains the largest part of
widget, or -1 if the widget not on a screen.
To use this as part of a signal, you should subclass moveEvent and resizeEvent of a QWidget and put your logic for deciding how to place/resize your widget there. If you want to resize like a browser tab that gets dragged onto a new monitor, you may want to just use the point of the mouse instead of the widget to decide which monitor to react to.
So your end code could look something like this:
void Widget::moveEvent(QMoveEvent * e)
{
m_newScreenSize = qApp->desktop()->screenGeometry(this);
}
void Widget::mouseReleaseEvent(QMouseEvent * e)
{
this->resize(m_newScreenSize);
}
Other Links and References
QMoveEvent
QResizeEvent
QDesktopWidget
http://qt-project.org/doc/qt-5/qdesktopwidget.html#details
http://qt-project.org/doc/qt-5/qapplication.html#desktop
http://qt-project.org/doc/qt-5/qmoveevent.html#details
http://qt-project.org/doc/qt-5/qwidget.html#moveEvent
http://qt-project.org/doc/qt-5/qwidget.html#resizeEvent
http://qt-project.org/doc/qt-5/qrect.html#intersects
http://qt-project.org/doc/qt-5/qdesktopwidget.html#availableGeometry-2
const QRect QDesktopWidget::availableGeometry(const QWidget * widget) const
I am trying to create an animation to make it look like a button turns over and the back shows. So what I was trying to do is:
1- Show a button with BackgroundColor x. (The button now has a Width of null, the property ActualWidth does have a value.)
2- Create a double animation that changes the width of the button to zero.
DoubleAnimation widthAnimation = new DoubleAnimation();
widthAnimation.From = this.ActualWidth;
widthAnimation.To = 0;
widthAnimation.SpeedRatio = 3;
widthAnimation.Duration = TimeSpan.FromMilliseconds(800);
3- Change the BackgroundColor of the button.
ColorAnimation colorAnimation = new ColorAnimation();
colorAnimation.From = State ? _xColor : _yColor;
colorAnimation.To = State ? _yColor : _xColor;
colorAnimation.BeginTime = TimeSpan.FromMilliseconds(400);
colorAnimation.Duration = TimeSpan.Zero;
4- Change the width back to it's original value.
widthAnimation.AutoReverse = true;
The problem is when the animation runs twice the animation reads this.ActualWidth while animating, which causes it to fail to the original width. How can I solve this? I would like to set the Width back to null again, but it seems impossible to me.
You'd better use xaml style and template to "declare" what you want and let WPF/Silverlight take care of all.
If you try to do the same thing by code you can do it but you need to know what the framework does behind the scenes.
Basically you can set
- Style to define the values of some properties of the control
- DataTemplate to define the visual representation of the control's content
- ControlTemplate to define the appearance of the control
Each of those can have Triggers
- Property Triggers
to set properties or starts actions, such as an animation
when a property value changes or when an event is raised;
EventTriggers and Storyboards
to start a set of actions based on the occurrence of an event
If you like to learn about XAML Style and Template,
take a look at http://msdn.microsoft.com/en-us/library/ms745683.aspx
Spend a day to learn and save many hours (or days) of try and error and frustration!
To go right to the point, in your case I think you should use a Storyboard.
See http://msdn.microsoft.com/en-us/library/ms742868.aspx
where you can find also the code equivalent of XAML examples
I came to the idea to targetting the MaxWidth instead of the actual Width. I now use a KeyFrameCollection which sets the MaxWidth to int.MaxValue at the start (so also at the end when using autoreverse).
It will work fine untill there will be phones with a resolution bigger than the max int value.
The code:
DoubleAnimationUsingKeyFrames widthAnimation = new DoubleAnimationUsingKeyFrames();
widthAnimation.KeyFrames.Add(new DiscreteDoubleKeyFrame()
{
KeyTime = TimeSpan.Zero,
Value = int.MaxValue,
});
widthAnimation.KeyFrames.Add(new LinearDoubleKeyFrame()
{
KeyTime = TimeSpan.FromMilliseconds(1),
Value = ActualWidth,
});
widthAnimation.KeyFrames.Add(new LinearDoubleKeyFrame()
{
KeyTime = TimeSpan.FromMilliseconds(400),
Value = 0,
});
widthAnimation.Duration = TimeSpan.FromMilliseconds(400);
widthAnimation.AutoReverse = true;