am using two datatable named as dnddatatable and dtdup . it contains set of phone numbers . I want to compare 2nd datatable with first datatable and remove the values from datatable1(name as dnddatatable)values which are equal to 2nd datatable name as(dtdup).
data in the datatable as follows.
dnddatatable(data table1)
phone
9865015695
9840903331
98668625
800971868
809679532
837445478
dtdup(dtata table2)
phone_numbers
9865015695
9840903331
result dnddatatable(data table1)
98668625
800971868
809679532
837445478
I answered a pretty similar question time ago, the idea is exactly the same
For i As Integer = 0 To dataset.Tables(0).Rows.Count - 1
Dim found As Boolean = False
For j As Integer = 0 To dataset1.Tables(0).Rows.Count - 1
If dataset.Tables(0).Rows(i)(0).ToString = dataset1.Tables(0).Rows(j) (0).ToString Then
found = True
End If
Next
If found = False Then
'here you are getting the right result in each loop
'in this example i'm showing the result in a textbox
'just change the instruction and write them in your note pad or wherever you want to
MsgBox(dataset.Tables(0).Rows(i)(0).ToString)
End If
Next
Related
I am new to vbscript and I am creating a script to reduce my day by day duplicate efforts. I have a column in an excel sheet which holds values. There are certain cells under this column where multiple values exists. Now I have an array which has some values which needs to be looked up / searched within each row under this column and delete the row if array values are not present within the row.
I tried to search the array values in the rows using InStr function and it worked if cell contains only one value. Code is attached below.
This sub is not working as expected if cell contains multiple values. e.g. Project 1 [ALT + ENTER] Dummy Project
Hence I tried to use Find and Search methods. I am unable to get the expected results using these methods too.
Fix Version/s
Row 1 - Project 3 a
Row 2 - Project 2 'spaces at the end
Row 3 - Project 4
---------
Project 1
Row 4 - Project 5
Row 5 - Project 1
Find method - No rows deleted
Replace method - Getting syntax error where I used Search method in place of InStr function as below,
If objWorksheet1.Cells(iDelCnt, fixVerColNum).Search(objWorksheet1.Cells(iDelCnt, fixVerColNum).Value, projectFilter(jDelCnt)) <> 0 Then
Please assist. Thanks in advance.
Expected - I expect row 'x' to be deleted if array value doesn't exists in Cells(x,y)
Dim objExcel, objWorkbook, objWorksheet1
Dim iDelCnt, jDelCnt, projectFilter, lRow, fixVerColNum, tempCell, deleteCounter, InStrTest
Set objExcel = CreateObject("Excel.Application")
objExcel.Application.Visible = True
Set objWorkbook = objExcel.Workbooks.Open(filePath) ' Location of the file on drive
Set objWorksheet1 = objWorkbook.Worksheets(1)
projectFilter = Array("Project 1","Project 2", "Project 3")
fixVerColNum = objExcel.Match("Fix Version/s", objWorksheet1.Range("A1:T1"), 0) 'Identify "Fix Version(s)" column number
lRow = objWorksheet1.Range("A1").CurrentRegion.Rows.Count
deleteCounter = 0
For iDelCnt = lRow to 2 Step -1
For jDelCnt = LBound(projectFilter) to UBound(projectFilter)
If InStr(1, objWorksheet1.Cells(iDelCnt, fixVerColNum).Value, projectFilter(jDelCnt), 1) <> 0 Then
deleteCounter = 1
Exit For
Else
deleteCounter = 0
End If
Next
If deleteCounter = 0 Then
objWorksheet1.Rows(iDelCnt).EntireRow.Delete
End If
Next
As per need, I want to select the Second Row from FlightsGrid Image shown below.
Applying below Code, I am getting RowCount as 6 but not able to click on 3rd Row.
Set ODesc = Description.Create
oDesc("micclass").value = "WpfTable"
Set objchild = WpfWindow("HPMyFlightSampleApplication").WpfTable("Table_FlightsGrid")
objCount = objchild.rowcount
objCount(2).click
Image from Flight Reservation Application:
The WpfTable object is not a collection, it doesn't support indexing. Did you try using its SelectRow method?
First, why are you using DP here if you are able to get row count of table.
Following two lines will give you row count of the table:
Set objchild = WpfWindow("HPMyFlightSampleApplication").WpfTable("Table_FlightsGrid")
objCount = objchild.rowcount
Second, try using its SelectRow method to select required row.
As #Motti suggested, you can use SelectRow. Or if you want to go more in depth and want to select particular cell (which will eventually select the entire row), you can use SelectCell like this way:
'Rows and Columns indexes are 0-based
iCols = WpfWindow("devname:=HPE MyFlight Sample Application").WpfTable("devname:=flightsDataGrid").ColumnCount
iRows = WpfWindow("devname:=HPE MyFlight Sample Application").WpfTable("devname:=flightsDataGrid").RowCount
sFlightNum = "12274 NW"
For i = 0 To iRows
If WpfWindow("devname:=HPE MyFlight Sample Application").WpfTable("devname:=flightsDataGrid").GetCellData(i, 4) = sFlightNum Then
WpfWindow("devname:=HPE MyFlight Sample Application").WpfTable("devname:=flightsDataGrid").SelectCell i, 4
Exit For
End If
Next
Here is the screenshot:
I am new to scripting and perform lot of activity as an analyst using excel sheets.
I have two files with list of items in it.
File1 contains 1 column
File2 contains 2 columns.
I want to check if the list present in column1 of file2 is same as in column1 of file2. If yes then it should print column1File1, column1File2 and coulmn2File2 in file3 else it should print "NA", column1File2, column2File2 in file3.
Please help, It will simplify my work a lot.
I made this program a while ago, although it will iterate through sheets in 1 workbook, and compare cell by cell, it may set you in the right direction. It would take a cell in 1 "master" sheet and then iterate through each sheet to find that in a particular column. After it found it the counter would increment, then it would take the next cell in the master sheet and so on. you could alter to use multiple books and take whatever cells you want and compare them.
Sub Open_Excel()
'Use worksheetNum as sheet to read/write data
Set currentWorkSheet = objExcel.ActiveWorkbook.Worksheets(worksheetNum)
'How many rows are used in the current worksheet
usedRowsCount = currentWorkSheet.UsedRange.Rows.Count
'Use current worksheet cells for values
Set Cells = currentWorksheet.Cells
'Loop through each row in the worksheet
For curRow = startRow to (usedRowsCount)
'Get computer name to ping to
strEmailAddressSource = Cells(curRow,colEmailAddressSource).Value
strServerSource = Cells(curRow,colHostserverSource).Value
strLocationSource = Cells(curRow,colLocationSource).Value
'make the values unique
strconcatenation = strServerSource & strLocationSource
Call Comparison()
Next
End Sub
'********************************************************************************************
'**** Comparison
'********************************************************************************************
'Comparison test
Sub Comparison()
'choose the worksheets to go through
For worksheetCounter = 6 to 9 'workSheetCount
Set currentWorkSheetComparison = objExcel.ActiveWorkbook.Worksheets(worksheetCounter)
usedRowsCountNew = currentWorkSheetComparison.UsedRange.Rows.Count
'First row to start the comparison from
For rowCompare = 2 to (usedRowsCountNew)
strEmailLot = currentWorkSheetComparison.Cells(rowCompare,colEmailAddressLot).Value
comp1 = StrComp(strEmailAddressSource,strEmailLot,0)
comp2 = StrComp(strconcatenation,reportConcat,0)
'check if the values match
If ((comp1 = 0) AND (comp2 = 0)) THEN
countvalue = countvalue + 1
End If
Next
Next
End Sub
I'm new in Lotus Notes programming and I need your advices and your help.
My main form contains a table with 8 rows and 2 columns. ( there are 16 cells ) Every each cell has a numeric field. My fields name are :
txt_n1 and txt_i1 ( for 1st row )
txt_n2 and txt_i2 ( for 2nd row )
....
txt_n8 and txt_i8 ( for 8th row )
What I want to do is:
I have a view called vwMarketing with just one column. I want this view to display only those docs. in which there is at least one or more rows which its cells contains equal values.
So, if let say txt_n4 = txt_i4 => OK
row(k) (where k=1..8) : if cell 1 value is 5 and cell 2 value is 5 => OK.
There could be more than one row with this property, important is to exist at least one, and the values not to be null.
I hoped i was pretty clear, thanks !
PS: Actually, the formula statement i want to be in the column, so if it is OK => "A" and if not => "" ( in the view property, I checked : Don't show empty categories )
if you have small amount of documents in the view, then as u were suggested use Selection Formula to exclude documents with wrong condition.
you can add computed item/flag into your documents, field will compute if the document should be displayed in the view or not. then you will not have performance issue. i.e.
but code you need should look like that (that will check if documents is fine to be displayed in view or not), if you use it in view - just put after all Select _res = 1 otherwise if you decide to use flag into document (to increase performance) then Select youritem = 1
_res := 0;
#For(i:=1;i<=8;i:=i+1;
_post := #Text(i);
_txt_n := #GetField("txt_n"+_post);
_txt_i := #Text(#GetField("txt_i"+_post));
#If( (_txt_n=_txt_i) & (_txt_n!="");
#Do( _res := 1; i:=9);
0
)
);
_res
I would solve it slightly different:
Create a hidden text field on your form called 'DisplayInView' (or similar).
Modify the view selection: SELECT DisplayInView="Yes"
Add the code below to the PostSave event of your form:
Dim thisdoc As NotesDocument
Dim isSame As Boolean
isSame = False
Set thisdoc = source.Document
'*** Loop through all fields in document and compare the field pairs
Forall i In thisdoc.Items
If Left(i.Name,5) = "txt_n" Then
If i.Text = thisdoc.GetItemValue( Replace(i.Name,"txt_n","txt_i") )(0) Then
isSame = True
Exit Forall
End If
End If
End Forall
If isSame Then
Call doc.ReplaceItemValue("DisplayInView","Yes")
Call doc.Save(True,False)
End If
I haven't tested it, but I believe it should work.
So i have FlexGrid in my VB6 project I'm working on. It has names on each row, and I have a drop down so the user can select what name they want to see more info for, here is what I have.
Dim target_name As String
Dim r As Integer
' Get the name.
target_name = Combo1
If Len(target_name) = 0 Then Exit Sub
' Search for the name, skipping the column heading row.
target_name = LCase$(target_name)
For r = 1 To MSFlexGrid1.Rows - 1
If LCase$(MSFlexGrid1.TextMatrix(r, 0)) = _
target_name Then
' We found the target. Select this row.
MSFlexGrid1.Row = r
MSFlexGrid1.RowSel = r
MSFlexGrid1.Col = 0
MSFlexGrid1.ColSel = MSFlexGrid1.Cols - 1
' Make the row visible.
MSFlexGrid1.TopRow = r
Exit Sub
End If
Next r
That works well, but it shows everything below that name too, I would like it to single out only the name selected.
Any help would be great.
What's the data source of your grid? You can place the filter on the data grid data source, so that as the user chooses the name from your drop down only the selected persons details are returned from the datasource to the grid.
Not exactly what you were asking, but its how I would achieve the result you are wanting.
P.S. I have used FlexGrid in VB6 and I don't know of a way to do what you are asking on the grid (might be there but I never noticed it).