I've installed openssh for windows and when I run ssh localhost I get
Bad owner or permissions on C:\Users\gary/.ssh/config
I've looked at these 2 questions https://superuser.com/questions/348694/bad-owner-or-permissions-error-using-cygwins-ssh-exe and https://serverfault.com/questions/253313/ssh-returns-bad-owner-or-permissions-on-ssh-config but none of the answers work for me. sshd is running as a service as the Local System user. I've run chmod 0600 C:\Users\gary\.ssh\config and chown gary C:\Users\gary\.ssh\config. I've also cleared the ACL by running setfacl -b C:\Users\gary\.ssh\config and then chmod 0600 C:\Users\gary\.ssh\config again. I've also tried changing the owner to SYSTEM and got the same error.
I'm not sure what else to do, is there anything wrong with my setup? I also have git installed which installed mingw, I deleted ssh and sshd from my git installation so they wouldn't be on my path.
Other commands I've run are
icacls "C:\Users\gary\.ssh\config" /setowner gary
chown -R gary:1049089 C:\Users\gary\.ssh
ls -la C:\Users\gary\.ssh\config shows
-rw-r--r-- 1 gary 1049089 229 Jan 3 14:43 'C:\Users\gary.ssh\config'
it keeps showing this even after changing the owner to SYSTEM, but in the file properties in file explorer it shows SYSTEM as the owner
This started popping up immediately after I created another user with Administrator privileges, and that account began inheriting access to my .ssh folder.
You do not need to change your permissions whatsoever.
Just go to .ssh, right-click Properties, Security Tab, Advanced. DISABLE INHERITANCE, then click on the Administrator user (the one that is not you) and Remove them. Apply. Done.
Use ssh client from Git instead of Windows inbuilt SSH client. E.g. set VS Code to use C:\Program Files\Git\usr\bin\ssh.exe instead of C:\Windows\System32\OpenSSH\ssh.exe.
Steps:
In VS Code navigated to [File] -> [Preferences] -> [Settings] -> Search remote.ssh.path
Input C:\Program Files\Git\usr\bin\ssh.exe
Alternatively:
Update PATH environment variable to point to Git bin before Windows System32.
Type "env" in Start bar to edit System (or account) environment variables.
Select Path and hit edit.
Add C:\Program Files\Git\usr\bin\ssh.exe to the list and move it to the top of the list.
Just got same issue after re-install windows. And easily fixed just by changing the file permissions to
SYSTEM & Administrators - Full Control
[your username] - Modify & as Owner
Note:
I'm still using Windows 10 built-in SSH client C:\Windows\System32\OpenSSH\ssh.exe & not using cygwin at all
For those still struggling with this, check this out: https://github.com/PowerShell/openssh-portable/pull/418. This was the case for me. It turns out that your computer should be named differently from your username... 🤷♂️ It will probably be fixed soon in future updates, because fix got into commit.
So again: if your computer name is the same as your username and you still haven't fixed this issue with permissions dialog, then probably renaming your computer could help.
Instead of using the properties box, you can use the one liner:
icacls .ssh /grant:r <yourUserName>:f /inheritance:r
/grant:r username:f -> grant and overwrite permissions, giving full permissions to username
/inheritance:r -> remove inherited permissions
Keep known_hosts writable with
icacls .ssh/known_hosts /grant:rw <username>:f /inheritance:r
I'm not sure what version of Windows you're running, but since this is recent I'd guess Windows 10. I recently found out that an OpenSSH client is installed by default as of the April 2018 update. I then found I had two instances of OpenSSH: the one I installed myself and the one Windows gave me. Uninstalling the one I had installed caused the error message you describe.
The solution that worked for me was to remove the user-installed OpenSSH as well as the C:\Users\username\.ssh folder, and let Windows 10 OpenSSH create the folder when you run the command the next time. I didn't have any configuration I was worried about losing, but if you do I'd suggest copying and pasting the contents of the files somewhere and recovering them afterwards.
Hope this helps!
Having the exact same issue today, this is how I solved it:
Go to C:\Users\username.ssh
Right-click the config file
Properties -> Security -> Advanced -> Disable Inheritance -> Disable
inheritance -> Remove all inherited permissions from this object ->
Apply -> Yes -> Ok -> Ok
Use FixUserFilePermissions.ps1 to fix permissions of client side files - keys and config files of current user.
git clone git#github.com:PowerShell/openssh-portable.git
cd openssh-portable/contrib/win32/openssh
.\FixUserFilePermissions.ps1 -Confirm:$false
On windows server this is due to permission problem. Need to remove access to other users for the following folders
.ssh - folder
Right click on this folder -> Select "Give access to" - > Click on "Remove Access"
Right click on this folder -> Select "properties" - > "Securities" - > Click on "Edit Permissions" - Remove other users except the ID you are logged in.
Repeat the same process for the folder under which you have .pem file. (Note: Keep .pem file in a separate folder)
For anyone, who still has troubles after applying the owner + modify (plus full control for admins): it did not work for me. Then I saw a solution to remove all other users (incl all admins), which did not help either.
This worked for me:
leave System and Administrators in place, with full control, as suggested above
leave the user itself in place, as owner, with modify, as suggested above
however, remove any other user or group. You probably need to go to advanced first, to disable inheritance of rights
after I removed an administrative user who was added by Windows after entering my folder (by passing through the UAC box), it worked for me again.
Hope this helps for anyone who encounters this specific issue :-)
If User is in Administrative group just keep configuration in
c:\programdata\ssh\ssh_config instead %USERPROFILE%.ssh\config, will work
after disabling inheritance, make sure you add your current user, else u cannot edit the file
For me it was fixed by running chmod 0644 config under ~/.ssh/. Earlier it was set to 755 which was causing "Bad owner or permissions on /home/home/.ssh/config"
I tried all the solutions above, and sadly still can't fix this issue. I'm pretty sure the permission of my ssh config is correct, this has been verified by the Explore GUI and the Get-Acl commands.
Then I finally find a way to solve it:
delete the entire .ssh folder and then open powershell and type ssh localhost. It will create a new .ssh folder for you, then you can apply the above permission tweaks(for me I only did one thing: disable inheritance).
So if other solutions doesn't work for you, maybe you can try this. Hope it's helpful.
PS: don't forget to backup your old .ssh folder before deleting it.
I was having this problem, and no amount of changing permissions or disabling inheritance on the config file would fix it. It turned out that it did not like my computer name and user name being the same, so I re-named my computer, allowed open ssh to re-create the config file, and the permissions are now correct. That was probably a bad idea to begin with, tbh.
I deleted C:\Users\user/.ssh/config and reran my stuff, then it worked.
However, if you have something valuable there, make a backup first, just in case!
After a domain change over, I started having this same problem. Went through all of the suggestions listed and nothing worked, including both chmod and chown solutions.
I ended up fixing the problem by copying the folder, pasting it, deleting the original, and then renaming it back to .ssh.
The problem seems from the files are owned/has-permission for more than one user.
1- Go to your ./ssh folder and for both config & id_rsa files. From the properties -> Security -> Advanced:
2- Make sure that the user that you are logged in with IS the only user there.
No group change or whatever,the first answer is right.Change to git ssh.exe
How?
uninstall win10's openssh in Settings
add path of git's ssh.exe to your Path
For me it was fixed by running chmod 0644 config under ~/.ssh/ when running WSL.
Rename the config file to something like config2
Open this file with notepad
Save As config (original name)
This worked for me.
I guess it was caused by the wrong path expression.
Bad owner or permissions on C:\Users\gary/.ssh/config
The /.ssh should be \.ssh. So I try to use git bash (the terminal tool when install git in Windows system) to run ssh command. It really works. But I don't really know if it is caused by the reason I guessed.
Hi guys after a troubleshoot for a day I found that this "m.. f.." config file should not stand in the .ssh/ path.
For VSCODE just set the config in 'C:\ProgrmaData\ssh\ssh_config' path as proposed in the second choice of the palette command, and forget .shh path for this configuration.
That worked fine for me.
Nota: there was also a known_host file also created here with strange VM names inside, I deleted also this file. and that helps
For me, re-editing the permission settings in Windows is too complicated. Regenerating another configuration in vscode does not work either.
I set a custom config file path to solve this problem.
["Remote SSH: Config file"]
The absolute file path to a custom SSH config file.
note: search this option by #ext:ms-vscode-remote.remote-ssh,ms-vscode-remote.remote-ssh-edit config file
This is because the config file cannot be accessed normally. We can create a new config file (this file needs to be accessible normally), such as D:/.ssh/config, and then specify the configuration file through the -F option: ssh -F D:/.ssh/config username#ip_address -p port
Delete the .config file, it has worked for me
It seems like WebStorm created a file login.component.ts___jb_old___ and I can't delete it or move it.
I've gone into settings and turned off safe write, and restarted WebStorm, but I can't delete the file, which is making me unable to run my docker container.
Doing an ls -ll prints
-rw-r----- 1 Uknown+User Unknown+User 2308 Feb 6 11:29 login.component.ts___jb_old___
All of the other files in the directory have the correct permissions and are owned by me.
I'm on Windows and I am the only user on the computer and set as Admin, I've opened an Admin command prompt and still get access denied when trying to change permissions of the file or delete the file.
When I open File Explorer to try and change it through the windows gui it tells me You do not have permission to view or edit this object's permission settings.
Any ideas on how I can delete this file?
You shoud close your webstorm app.
I delete it success but created again when i refresh directory.
I restart the PC then this problem resolved...
A working fix.
IntelliJ 2019.2.2 w/ PyCharm (Latest release)
After updating to 2019.2.2 I was having this error as well. The problem I was facing was on running webpack-dev-server.
Found the recommendation to disable 'Safe writing' - which resolved my issue.
Settings > Appearance and Behavior > System Settings.
Hope this helps!
We're experiencing strange permission issues with SVN after switching from Windows Server 2003 to Server 2008.
On our standard build box there is a folder (C:\SVN_Code_Folder) which AD_User_A associates with a SVN repository using SVN_User and TortoiseSVN 1.7.6
When using Windows 2003, when AD_User_B logs into the box and tries to Update, Switch, Merge the SVN_Code_Folder with SVN_User, the command is executed.
It Windows 2008, it fails with the message:
Command: Update
Error: Working copy 'C:\jboss-4.2.3.GA\server\New folder' locked
Error: sqlite: attempt to write a readonly database
Error: sqlite: attempt to write a readonly database
Completed!
Attempting to unlock the file, which was never locked, via the context menu is met with the following message:
There's nothing to unlock. No file has a lock in this working copy.
I've played with the permissions of the folder and I've discovered that giving "Domain Users" control over the folder fixes the issue, but I would prefer to not have such a broad permissions. I've tried granting the same permissions to individual users and a SVN-group, but these too did not work.
What am I missing?
Is this an improper use of SVN?
Can 2 different Domain users update a folder using SVN without removing the .SVN file?
For future reference...
I had this same problem with some WC's that I copied over to my new laptop's hard drive, from a file share on my old machine.
It turned out that the problem was solved by giving myself (as opposed to all domain users, or any other group) full control over the folder.
Did you check the svn service user on the win2008 machine?
Does that user have local administrator privileges and also have permission to these folders on c:?
After changing anything restart the service.
For me change folder permissions did't help, but I have update for several directories in a batch script so I solved this by
cmd -> Run as administrator -> start update script