I am using Oracle Portal 10.1.2.3.0 and have deployed a portlet application using JDeveloper, which says it succeeded.
I can see the application deployed in the correct OC4J container instance as well.
When I log in to the portal, I can see the providers registration record for this portlet.
Log in to portal
Click Edit on any page
Click Navigator
Click Providers tab
Click Registered Providers
Click Edit Registration on the portlet I previously deployed
Click the Connection tab
I see the providers URL: someserver/publications-dev/providers
I can access that URL and see the following output:
Congratulations! You have successfully reached your Provider's Test Page.
Recognizing Portlets...
PublicationsNewsPortlet
PublicationsNewsDetailPortlet
PublicationsNewsDetailListPortlet
PublicationsCareersPortlet
PublicationsCareersDetailPortlet
PublicationsCareersDetailListPortlet
Recognizing component versions...
ptlshare.jar version: 10.1.2.0.2
pdkjava.jar version: 10.1.2.0.2
Yet, when I try to add the portlet to a page, searching for the portlet name "Careers Widget Portlet" or "PublicationsCareersPortlet" reveals nothing. This is defined in the provider.xml:
<name>PublicationsCareersPortlet</name>
<title>Careers Widget Portlet</title>
Can anyone give me a hint to what I might be missing? How can the Providers Test Paqe state that it recognizes the portlets but I cannot add them to a page?
Turns out there was a problem with the registration - and I couldn't unregister the provider for some reason: This provider is not deletable. (WWC-43169).
Instead, I created a new registration and it now works.
Related
I am developing custom application in Oracle Apps which will call an oracle form named form.fmx
I have put form.fmx in FORM_PATH variable of default.env
I have created section called vikram in formsweb.cfg
I am accessing as http://prod.txis.com:7406/forms/frmservlet?config=vikram&form=form
And getting this error
URL validation failed. The error could have been caused through the use of the browser's navigation buttons ( the browser Back button or refresh, for example). If the error persists, Please contact system administrator.
Try one of the following methods to resolve your issue :
Goto Internet Options >> Security Tab >> Trusted sites >> Sites >>
Add this website to the zone.
Issue select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
to see whether returns the result NORMAL, If this is not the case you're in the maintenance mode, and use :
sqlplus mySchema/myPassword#$AD_TOP/patch/115/sql/adsetmmd.sql DISABLE
Click on Lock and Edit, and then
Navigate to Domain structure >> Services >> Data sources Where you should see both oacore_cluster1 and forms_cluster1 in
the EBSDataSource targets.
Assume forms_cluster1 is missing in the EBSdatasource target list, then click on the EBSDatasource and then go to the
Targets section. In this page, check the box for forms_cluster1.
Save and Activate the changes and see the following view in you weblogic screen :
Issue was with Forms server configuration.
With correct config, it is running fine
Error launching Analytics for Apache Hadoop in Bluemix. I'm getting the following error:
Could not initialize class com.ibm.datatools.dsweb.blumix.oauth2.intg.OAuth2ExtURLAccessHandler.
I tried to restart the service, but I keep getting the same error.
I suggest you to open a support request using one of the following methods:
Use the Support Widget. It is available from the user avatar in the upper right corner of the main Bluemix UI. After opening the support widget panel, select Get Help > Get In Touch, select the type of assistance you need, and then fill out the support form.
Use the Support Site 'Get Help' form. This form is available on a separate site that is made available for ticket submission when you cannot log into Bluemix and access the Support Widget. Go to http://ibm.biz/bluemixsupport and fill in the support request form.
I'm developing an application in MVC3 (http://www.colombiatrolley.com/sitrolley). In my computer it runs correctly, but when I upload it to the server (a hosting service) I get this error:
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
I know it is a very common error but I have not fixed it yet.
Some config sections are only allowed at the "root" of the application, then authentication section is one of them.
You need to configure IIS to run your your site as an application, not a sub-directory in an existing application.
For IIS 7+, right click the directory that contains your web application, and select "Convert to Application".
EDIT:
Arie van Someren is right. Looking carefully at your error, you want the <authentication> configuration to be in the web.config one level up, not the web.config in Views.
I had the same problem. I solved it by deleting the obj folder that appeared after doing a "Build > Publish".
I am developing a website using MVC 3,
I have a web setup project for installing it to my localhost.
Now what I want is to create an EVENT SOURCE ( where I will later on log using my website ) using this very setup.
Is this possible?
I have been following this link:
http://msdn.microsoft.com/en-us/library/ms998320.aspx#paght000015%5Feventlogaccess
I earlier tried creating an EVENT SOURCE programmatically, but my web app threw security exceptions, similar to the error the user in this post was getting: System.Security.SecurityException when writing to Event Log
Thanks in advance
Yasser
After a lot of struggle I myslef managed to answer my question
I first had to create a seperate installer class, which had code to install an event source.
Next in my web setup project, under custom action in INSTALL, I simply added the output of the above project which was a single dll.
and thats it!
Now whenever my web setup runs, the installer dll is also activated and run and my event source gets created.
Now that was not too difficult was it ? ;)
I'm trying to set up an MVC application that will service several facebook applications for various clients. With help from Prabir's blog post I was able to set this up with v5.2.1 and it is working well, with one exception.
At first, I had only set up two "clients", one called DemoStore and the first client, ClientA. The application determines what client content and facebook settings to use based on the url. example canvasUrl: http://my_domain.com/client_name/
This works for ClientA, but for some reason when I try any DemoStore routes I get a 500 error. The error page points to an issue with the web.config.
Config Error:
Cannot add duplicate collection entry of type 'add' with unique key attribute 'name' set to 'facebookredirect.axd'
I am able to add additional clients with no problem, and changing DemoStore to something like "demo" while using the same facebook application settings works fine also.
Working calls:
http:// localhost:2888/ClientA/
http:// localhost:2888/ClientB/
http:// localhost:2888/Demo/
Failing call:
http:// localhost:2888/DemoStore/
I was thinking this might be an MVC issue, but the Config Error points to the facebookredirect handler. Why would the SDK try to add this value to the config during runtime, and only for this specific client?
Any insight would be greatly appreciated.
I managed to figure out what went wrong here. Silly mistake..
After I had set up the application routes to require the client_name I changed the Project Url in the project properties to point to demostore by default. When I hit ctrl+S a dialog popped up that I promptly entered through without reading.
When I changed the Project Url, IIS Express created a new virtual directory for the project. This was the source of my problem. Why? I'm not sure, but once I removed the second site from my applicationhost.config I was able to access the DemoStore routes.
Moral of the story: read the VS dialog messages!