Related
In Bash, what are the differences between single quotes ('') and double quotes ("")?
Single quotes won't interpolate anything, but double quotes will. For example: variables, backticks, certain \ escapes, etc.
Example:
$ echo "$(echo "upg")"
upg
$ echo '$(echo "upg")'
$(echo "upg")
The Bash manual has this to say:
3.1.2.2 Single Quotes
Enclosing characters in single quotes (') preserves the literal value of each character within the quotes. A single quote may not occur between single quotes, even when preceded by a backslash.
3.1.2.3 Double Quotes
Enclosing characters in double quotes (") preserves the literal value of all characters within the quotes, with the exception of $, `, \, and, when history expansion is enabled, !. The characters $ and ` retain their special meaning within double quotes (see Shell Expansions). The backslash retains its special meaning only when followed by one of the following characters: $, `, ", \, or newline. Within double quotes, backslashes that are followed by one of these characters are removed. Backslashes preceding characters without a special meaning are left unmodified. A double quote may be quoted within double quotes by preceding it with a backslash. If enabled, history expansion will be performed unless an ! appearing in double quotes is escaped using a backslash. The backslash preceding the ! is not removed.
The special parameters * and # have special meaning when in double quotes (see Shell Parameter Expansion).
The accepted answer is great. I am making a table that helps in quick comprehension of the topic. The explanation involves a simple variable a as well as an indexed array arr.
If we set
a=apple # a simple variable
arr=(apple) # an indexed array with a single element
and then echo the expression in the second column, we would get the result / behavior shown in the third column. The fourth column explains the behavior.
#
Expression
Result
Comments
1
"$a"
apple
variables are expanded inside ""
2
'$a'
$a
variables are not expanded inside ''
3
"'$a'"
'apple'
'' has no special meaning inside ""
4
'"$a"'
"$a"
"" is treated literally inside ''
5
'\''
invalid
can not escape a ' within ''; use "'" or $'\'' (ANSI-C quoting)
6
"red$arocks"
red
$arocks does not expand $a; use ${a}rocks to preserve $a
7
"redapple$"
redapple$
$ followed by no variable name evaluates to $
8
'\"'
\"
\ has no special meaning inside ''
9
"\'"
\'
\' is interpreted inside "" but has no significance for '
10
"\""
"
\" is interpreted inside ""
11
"*"
*
glob does not work inside "" or ''
12
"\t\n"
\t\n
\t and \n have no special meaning inside "" or ''; use ANSI-C quoting
13
"`echo hi`"
hi
`` and $() are evaluated inside "" (backquotes are retained in actual output)
14
'`echo hi`'
`echo hi`
`` and $() are not evaluated inside '' (backquotes are retained in actual output)
15
'${arr[0]}'
${arr[0]}
array access not possible inside ''
16
"${arr[0]}"
apple
array access works inside ""
17
$'$a\''
$a'
single quotes can be escaped inside ANSI-C quoting
18
"$'\t'"
$'\t'
ANSI-C quoting is not interpreted inside ""
19
'!cmd'
!cmd
history expansion character '!' is ignored inside ''
20
"!cmd"
cmd args
expands to the most recent command matching "cmd"
21
$'!cmd'
!cmd
history expansion character '!' is ignored inside ANSI-C quotes
See also:
ANSI-C quoting with $'' - GNU Bash Manual
Locale translation with $"" - GNU Bash Manual
A three-point formula for quotes
If you're referring to what happens when you echo something, the single quotes will literally echo what you have between them, while the double quotes will evaluate variables between them and output the value of the variable.
For example, this
#!/bin/sh
MYVAR=sometext
echo "double quotes gives you $MYVAR"
echo 'single quotes gives you $MYVAR'
will give this:
double quotes gives you sometext
single quotes gives you $MYVAR
Others explained it very well, and I just want to give something with simple examples.
Single quotes can be used around text to prevent the shell from interpreting any special characters. Dollar signs, spaces, ampersands, asterisks and other special characters are all ignored when enclosed within single quotes.
echo 'All sorts of things are ignored in single quotes, like $ & * ; |.'
It will give this:
All sorts of things are ignored in single quotes, like $ & * ; |.
The only thing that cannot be put within single quotes is a single quote.
Double quotes act similarly to single quotes, except double quotes still allow the shell to interpret dollar signs, back quotes and backslashes. It is already known that backslashes prevent a single special character from being interpreted. This can be useful within double quotes if a dollar sign needs to be used as text instead of for a variable. It also allows double quotes to be escaped so they are not interpreted as the end of a quoted string.
echo "Here's how we can use single ' and double \" quotes within double quotes"
It will give this:
Here's how we can use single ' and double " quotes within double quotes
It may also be noticed that the apostrophe, which would otherwise be interpreted as the beginning of a quoted string, is ignored within double quotes. Variables, however, are interpreted and substituted with their values within double quotes.
echo "The current Oracle SID is $ORACLE_SID"
It will give this:
The current Oracle SID is test
Back quotes are wholly unlike single or double quotes. Instead of being used to prevent the interpretation of special characters, back quotes actually force the execution of the commands they enclose. After the enclosed commands are executed, their output is substituted in place of the back quotes in the original line. This will be clearer with an example.
today=`date '+%A, %B %d, %Y'`
echo $today
It will give this:
Monday, September 28, 2015
Since this is the de facto answer when dealing with quotes in Bash, I'll add upon one more point missed in the answers above, when dealing with the arithmetic operators in the shell.
The Bash shell supports two ways to do arithmetic operation, one defined by the built-in let command and the other the $((..)) operator. The former evaluates an arithmetic expression while the latter is more of a compound statement.
It is important to understand that the arithmetic expression used with let undergoes word-splitting, pathname expansion just like any other shell commands. So proper quoting and escaping need to be done.
See this example when using let:
let 'foo = 2 + 1'
echo $foo
3
Using single quotes here is absolutely fine here, as there isn't any need for variable expansions here. Consider a case of
bar=1
let 'foo = $bar + 1'
It would fail miserably, as the $bar under single quotes would not expand and needs to be double-quoted as
let 'foo = '"$bar"' + 1'
This should be one of the reasons, the $((..)) should always be considered over using let. Because inside it, the contents aren't subject to word-splitting. The previous example using let can be simply written as
(( bar=1, foo = bar + 1 ))
Always remember to use $((..)) without single quotes
Though the $((..)) can be used with double quotes, there isn't any purpose to it as the result of it cannot contain content that would need the double quote. Just ensure it is not single quoted.
printf '%d\n' '$((1+1))'
-bash: printf: $((1+1)): invalid number
printf '%d\n' $((1+1))
2
printf '%d\n' "$((1+1))"
2
Maybe in some special cases of using the $((..)) operator inside a single quoted string, you need to interpolate quotes in a way that the operator either is left unquoted or under double quotes. E.g., consider a case, when you are tying to use the operator inside a curl statement to pass a counter every time a request is made, do
curl http://myurl.com --data-binary '{"requestCounter":'"$((reqcnt++))"'}'
Notice the use of nested double quotes inside, without which the literal string $((reqcnt++)) is passed to the requestCounter field.
There is a clear distinction between the usage of ' ' and " ".
When ' ' is used around anything, there is no "transformation or translation" done. It is printed as it is.
With " ", whatever it surrounds, is "translated or transformed" into its value.
By translation/ transformation I mean the following:
Anything within the single quotes will not be "translated" to their values. They will be taken as they are inside quotes. Example: a=23, then echo '$a' will produce $a on standard output. Whereas echo "$a" will produce 23 on standard output.
A minimal answer is needed for people to get going without spending a lot of time as I had to.
The following is, surprisingly (to those looking for an answer), a complete command:
$ echo '\'
whose output is:
\
Backslashes, surprisingly to even long-time users of bash, do not have any meaning inside single quotes. Nor does anything else.
In Bash, what are the differences between single quotes ('') and double quotes ("")?
Single quotes won't interpolate anything, but double quotes will. For example: variables, backticks, certain \ escapes, etc.
Example:
$ echo "$(echo "upg")"
upg
$ echo '$(echo "upg")'
$(echo "upg")
The Bash manual has this to say:
3.1.2.2 Single Quotes
Enclosing characters in single quotes (') preserves the literal value of each character within the quotes. A single quote may not occur between single quotes, even when preceded by a backslash.
3.1.2.3 Double Quotes
Enclosing characters in double quotes (") preserves the literal value of all characters within the quotes, with the exception of $, `, \, and, when history expansion is enabled, !. The characters $ and ` retain their special meaning within double quotes (see Shell Expansions). The backslash retains its special meaning only when followed by one of the following characters: $, `, ", \, or newline. Within double quotes, backslashes that are followed by one of these characters are removed. Backslashes preceding characters without a special meaning are left unmodified. A double quote may be quoted within double quotes by preceding it with a backslash. If enabled, history expansion will be performed unless an ! appearing in double quotes is escaped using a backslash. The backslash preceding the ! is not removed.
The special parameters * and # have special meaning when in double quotes (see Shell Parameter Expansion).
The accepted answer is great. I am making a table that helps in quick comprehension of the topic. The explanation involves a simple variable a as well as an indexed array arr.
If we set
a=apple # a simple variable
arr=(apple) # an indexed array with a single element
and then echo the expression in the second column, we would get the result / behavior shown in the third column. The fourth column explains the behavior.
#
Expression
Result
Comments
1
"$a"
apple
variables are expanded inside ""
2
'$a'
$a
variables are not expanded inside ''
3
"'$a'"
'apple'
'' has no special meaning inside ""
4
'"$a"'
"$a"
"" is treated literally inside ''
5
'\''
invalid
can not escape a ' within ''; use "'" or $'\'' (ANSI-C quoting)
6
"red$arocks"
red
$arocks does not expand $a; use ${a}rocks to preserve $a
7
"redapple$"
redapple$
$ followed by no variable name evaluates to $
8
'\"'
\"
\ has no special meaning inside ''
9
"\'"
\'
\' is interpreted inside "" but has no significance for '
10
"\""
"
\" is interpreted inside ""
11
"*"
*
glob does not work inside "" or ''
12
"\t\n"
\t\n
\t and \n have no special meaning inside "" or ''; use ANSI-C quoting
13
"`echo hi`"
hi
`` and $() are evaluated inside "" (backquotes are retained in actual output)
14
'`echo hi`'
`echo hi`
`` and $() are not evaluated inside '' (backquotes are retained in actual output)
15
'${arr[0]}'
${arr[0]}
array access not possible inside ''
16
"${arr[0]}"
apple
array access works inside ""
17
$'$a\''
$a'
single quotes can be escaped inside ANSI-C quoting
18
"$'\t'"
$'\t'
ANSI-C quoting is not interpreted inside ""
19
'!cmd'
!cmd
history expansion character '!' is ignored inside ''
20
"!cmd"
cmd args
expands to the most recent command matching "cmd"
21
$'!cmd'
!cmd
history expansion character '!' is ignored inside ANSI-C quotes
See also:
ANSI-C quoting with $'' - GNU Bash Manual
Locale translation with $"" - GNU Bash Manual
A three-point formula for quotes
If you're referring to what happens when you echo something, the single quotes will literally echo what you have between them, while the double quotes will evaluate variables between them and output the value of the variable.
For example, this
#!/bin/sh
MYVAR=sometext
echo "double quotes gives you $MYVAR"
echo 'single quotes gives you $MYVAR'
will give this:
double quotes gives you sometext
single quotes gives you $MYVAR
Others explained it very well, and I just want to give something with simple examples.
Single quotes can be used around text to prevent the shell from interpreting any special characters. Dollar signs, spaces, ampersands, asterisks and other special characters are all ignored when enclosed within single quotes.
echo 'All sorts of things are ignored in single quotes, like $ & * ; |.'
It will give this:
All sorts of things are ignored in single quotes, like $ & * ; |.
The only thing that cannot be put within single quotes is a single quote.
Double quotes act similarly to single quotes, except double quotes still allow the shell to interpret dollar signs, back quotes and backslashes. It is already known that backslashes prevent a single special character from being interpreted. This can be useful within double quotes if a dollar sign needs to be used as text instead of for a variable. It also allows double quotes to be escaped so they are not interpreted as the end of a quoted string.
echo "Here's how we can use single ' and double \" quotes within double quotes"
It will give this:
Here's how we can use single ' and double " quotes within double quotes
It may also be noticed that the apostrophe, which would otherwise be interpreted as the beginning of a quoted string, is ignored within double quotes. Variables, however, are interpreted and substituted with their values within double quotes.
echo "The current Oracle SID is $ORACLE_SID"
It will give this:
The current Oracle SID is test
Back quotes are wholly unlike single or double quotes. Instead of being used to prevent the interpretation of special characters, back quotes actually force the execution of the commands they enclose. After the enclosed commands are executed, their output is substituted in place of the back quotes in the original line. This will be clearer with an example.
today=`date '+%A, %B %d, %Y'`
echo $today
It will give this:
Monday, September 28, 2015
Since this is the de facto answer when dealing with quotes in Bash, I'll add upon one more point missed in the answers above, when dealing with the arithmetic operators in the shell.
The Bash shell supports two ways to do arithmetic operation, one defined by the built-in let command and the other the $((..)) operator. The former evaluates an arithmetic expression while the latter is more of a compound statement.
It is important to understand that the arithmetic expression used with let undergoes word-splitting, pathname expansion just like any other shell commands. So proper quoting and escaping need to be done.
See this example when using let:
let 'foo = 2 + 1'
echo $foo
3
Using single quotes here is absolutely fine here, as there isn't any need for variable expansions here. Consider a case of
bar=1
let 'foo = $bar + 1'
It would fail miserably, as the $bar under single quotes would not expand and needs to be double-quoted as
let 'foo = '"$bar"' + 1'
This should be one of the reasons, the $((..)) should always be considered over using let. Because inside it, the contents aren't subject to word-splitting. The previous example using let can be simply written as
(( bar=1, foo = bar + 1 ))
Always remember to use $((..)) without single quotes
Though the $((..)) can be used with double quotes, there isn't any purpose to it as the result of it cannot contain content that would need the double quote. Just ensure it is not single quoted.
printf '%d\n' '$((1+1))'
-bash: printf: $((1+1)): invalid number
printf '%d\n' $((1+1))
2
printf '%d\n' "$((1+1))"
2
Maybe in some special cases of using the $((..)) operator inside a single quoted string, you need to interpolate quotes in a way that the operator either is left unquoted or under double quotes. E.g., consider a case, when you are tying to use the operator inside a curl statement to pass a counter every time a request is made, do
curl http://myurl.com --data-binary '{"requestCounter":'"$((reqcnt++))"'}'
Notice the use of nested double quotes inside, without which the literal string $((reqcnt++)) is passed to the requestCounter field.
There is a clear distinction between the usage of ' ' and " ".
When ' ' is used around anything, there is no "transformation or translation" done. It is printed as it is.
With " ", whatever it surrounds, is "translated or transformed" into its value.
By translation/ transformation I mean the following:
Anything within the single quotes will not be "translated" to their values. They will be taken as they are inside quotes. Example: a=23, then echo '$a' will produce $a on standard output. Whereas echo "$a" will produce 23 on standard output.
A minimal answer is needed for people to get going without spending a lot of time as I had to.
The following is, surprisingly (to those looking for an answer), a complete command:
$ echo '\'
whose output is:
\
Backslashes, surprisingly to even long-time users of bash, do not have any meaning inside single quotes. Nor does anything else.
In Bash, what are the differences between single quotes ('') and double quotes ("")?
Single quotes won't interpolate anything, but double quotes will. For example: variables, backticks, certain \ escapes, etc.
Example:
$ echo "$(echo "upg")"
upg
$ echo '$(echo "upg")'
$(echo "upg")
The Bash manual has this to say:
3.1.2.2 Single Quotes
Enclosing characters in single quotes (') preserves the literal value of each character within the quotes. A single quote may not occur between single quotes, even when preceded by a backslash.
3.1.2.3 Double Quotes
Enclosing characters in double quotes (") preserves the literal value of all characters within the quotes, with the exception of $, `, \, and, when history expansion is enabled, !. The characters $ and ` retain their special meaning within double quotes (see Shell Expansions). The backslash retains its special meaning only when followed by one of the following characters: $, `, ", \, or newline. Within double quotes, backslashes that are followed by one of these characters are removed. Backslashes preceding characters without a special meaning are left unmodified. A double quote may be quoted within double quotes by preceding it with a backslash. If enabled, history expansion will be performed unless an ! appearing in double quotes is escaped using a backslash. The backslash preceding the ! is not removed.
The special parameters * and # have special meaning when in double quotes (see Shell Parameter Expansion).
The accepted answer is great. I am making a table that helps in quick comprehension of the topic. The explanation involves a simple variable a as well as an indexed array arr.
If we set
a=apple # a simple variable
arr=(apple) # an indexed array with a single element
and then echo the expression in the second column, we would get the result / behavior shown in the third column. The fourth column explains the behavior.
#
Expression
Result
Comments
1
"$a"
apple
variables are expanded inside ""
2
'$a'
$a
variables are not expanded inside ''
3
"'$a'"
'apple'
'' has no special meaning inside ""
4
'"$a"'
"$a"
"" is treated literally inside ''
5
'\''
invalid
can not escape a ' within ''; use "'" or $'\'' (ANSI-C quoting)
6
"red$arocks"
red
$arocks does not expand $a; use ${a}rocks to preserve $a
7
"redapple$"
redapple$
$ followed by no variable name evaluates to $
8
'\"'
\"
\ has no special meaning inside ''
9
"\'"
\'
\' is interpreted inside "" but has no significance for '
10
"\""
"
\" is interpreted inside ""
11
"*"
*
glob does not work inside "" or ''
12
"\t\n"
\t\n
\t and \n have no special meaning inside "" or ''; use ANSI-C quoting
13
"`echo hi`"
hi
`` and $() are evaluated inside "" (backquotes are retained in actual output)
14
'`echo hi`'
`echo hi`
`` and $() are not evaluated inside '' (backquotes are retained in actual output)
15
'${arr[0]}'
${arr[0]}
array access not possible inside ''
16
"${arr[0]}"
apple
array access works inside ""
17
$'$a\''
$a'
single quotes can be escaped inside ANSI-C quoting
18
"$'\t'"
$'\t'
ANSI-C quoting is not interpreted inside ""
19
'!cmd'
!cmd
history expansion character '!' is ignored inside ''
20
"!cmd"
cmd args
expands to the most recent command matching "cmd"
21
$'!cmd'
!cmd
history expansion character '!' is ignored inside ANSI-C quotes
See also:
ANSI-C quoting with $'' - GNU Bash Manual
Locale translation with $"" - GNU Bash Manual
A three-point formula for quotes
If you're referring to what happens when you echo something, the single quotes will literally echo what you have between them, while the double quotes will evaluate variables between them and output the value of the variable.
For example, this
#!/bin/sh
MYVAR=sometext
echo "double quotes gives you $MYVAR"
echo 'single quotes gives you $MYVAR'
will give this:
double quotes gives you sometext
single quotes gives you $MYVAR
Others explained it very well, and I just want to give something with simple examples.
Single quotes can be used around text to prevent the shell from interpreting any special characters. Dollar signs, spaces, ampersands, asterisks and other special characters are all ignored when enclosed within single quotes.
echo 'All sorts of things are ignored in single quotes, like $ & * ; |.'
It will give this:
All sorts of things are ignored in single quotes, like $ & * ; |.
The only thing that cannot be put within single quotes is a single quote.
Double quotes act similarly to single quotes, except double quotes still allow the shell to interpret dollar signs, back quotes and backslashes. It is already known that backslashes prevent a single special character from being interpreted. This can be useful within double quotes if a dollar sign needs to be used as text instead of for a variable. It also allows double quotes to be escaped so they are not interpreted as the end of a quoted string.
echo "Here's how we can use single ' and double \" quotes within double quotes"
It will give this:
Here's how we can use single ' and double " quotes within double quotes
It may also be noticed that the apostrophe, which would otherwise be interpreted as the beginning of a quoted string, is ignored within double quotes. Variables, however, are interpreted and substituted with their values within double quotes.
echo "The current Oracle SID is $ORACLE_SID"
It will give this:
The current Oracle SID is test
Back quotes are wholly unlike single or double quotes. Instead of being used to prevent the interpretation of special characters, back quotes actually force the execution of the commands they enclose. After the enclosed commands are executed, their output is substituted in place of the back quotes in the original line. This will be clearer with an example.
today=`date '+%A, %B %d, %Y'`
echo $today
It will give this:
Monday, September 28, 2015
Since this is the de facto answer when dealing with quotes in Bash, I'll add upon one more point missed in the answers above, when dealing with the arithmetic operators in the shell.
The Bash shell supports two ways to do arithmetic operation, one defined by the built-in let command and the other the $((..)) operator. The former evaluates an arithmetic expression while the latter is more of a compound statement.
It is important to understand that the arithmetic expression used with let undergoes word-splitting, pathname expansion just like any other shell commands. So proper quoting and escaping need to be done.
See this example when using let:
let 'foo = 2 + 1'
echo $foo
3
Using single quotes here is absolutely fine here, as there isn't any need for variable expansions here. Consider a case of
bar=1
let 'foo = $bar + 1'
It would fail miserably, as the $bar under single quotes would not expand and needs to be double-quoted as
let 'foo = '"$bar"' + 1'
This should be one of the reasons, the $((..)) should always be considered over using let. Because inside it, the contents aren't subject to word-splitting. The previous example using let can be simply written as
(( bar=1, foo = bar + 1 ))
Always remember to use $((..)) without single quotes
Though the $((..)) can be used with double quotes, there isn't any purpose to it as the result of it cannot contain content that would need the double quote. Just ensure it is not single quoted.
printf '%d\n' '$((1+1))'
-bash: printf: $((1+1)): invalid number
printf '%d\n' $((1+1))
2
printf '%d\n' "$((1+1))"
2
Maybe in some special cases of using the $((..)) operator inside a single quoted string, you need to interpolate quotes in a way that the operator either is left unquoted or under double quotes. E.g., consider a case, when you are tying to use the operator inside a curl statement to pass a counter every time a request is made, do
curl http://myurl.com --data-binary '{"requestCounter":'"$((reqcnt++))"'}'
Notice the use of nested double quotes inside, without which the literal string $((reqcnt++)) is passed to the requestCounter field.
There is a clear distinction between the usage of ' ' and " ".
When ' ' is used around anything, there is no "transformation or translation" done. It is printed as it is.
With " ", whatever it surrounds, is "translated or transformed" into its value.
By translation/ transformation I mean the following:
Anything within the single quotes will not be "translated" to their values. They will be taken as they are inside quotes. Example: a=23, then echo '$a' will produce $a on standard output. Whereas echo "$a" will produce 23 on standard output.
A minimal answer is needed for people to get going without spending a lot of time as I had to.
The following is, surprisingly (to those looking for an answer), a complete command:
$ echo '\'
whose output is:
\
Backslashes, surprisingly to even long-time users of bash, do not have any meaning inside single quotes. Nor does anything else.
In Bash, what are the differences between single quotes ('') and double quotes ("")?
Single quotes won't interpolate anything, but double quotes will. For example: variables, backticks, certain \ escapes, etc.
Example:
$ echo "$(echo "upg")"
upg
$ echo '$(echo "upg")'
$(echo "upg")
The Bash manual has this to say:
3.1.2.2 Single Quotes
Enclosing characters in single quotes (') preserves the literal value of each character within the quotes. A single quote may not occur between single quotes, even when preceded by a backslash.
3.1.2.3 Double Quotes
Enclosing characters in double quotes (") preserves the literal value of all characters within the quotes, with the exception of $, `, \, and, when history expansion is enabled, !. The characters $ and ` retain their special meaning within double quotes (see Shell Expansions). The backslash retains its special meaning only when followed by one of the following characters: $, `, ", \, or newline. Within double quotes, backslashes that are followed by one of these characters are removed. Backslashes preceding characters without a special meaning are left unmodified. A double quote may be quoted within double quotes by preceding it with a backslash. If enabled, history expansion will be performed unless an ! appearing in double quotes is escaped using a backslash. The backslash preceding the ! is not removed.
The special parameters * and # have special meaning when in double quotes (see Shell Parameter Expansion).
The accepted answer is great. I am making a table that helps in quick comprehension of the topic. The explanation involves a simple variable a as well as an indexed array arr.
If we set
a=apple # a simple variable
arr=(apple) # an indexed array with a single element
and then echo the expression in the second column, we would get the result / behavior shown in the third column. The fourth column explains the behavior.
#
Expression
Result
Comments
1
"$a"
apple
variables are expanded inside ""
2
'$a'
$a
variables are not expanded inside ''
3
"'$a'"
'apple'
'' has no special meaning inside ""
4
'"$a"'
"$a"
"" is treated literally inside ''
5
'\''
invalid
can not escape a ' within ''; use "'" or $'\'' (ANSI-C quoting)
6
"red$arocks"
red
$arocks does not expand $a; use ${a}rocks to preserve $a
7
"redapple$"
redapple$
$ followed by no variable name evaluates to $
8
'\"'
\"
\ has no special meaning inside ''
9
"\'"
\'
\' is interpreted inside "" but has no significance for '
10
"\""
"
\" is interpreted inside ""
11
"*"
*
glob does not work inside "" or ''
12
"\t\n"
\t\n
\t and \n have no special meaning inside "" or ''; use ANSI-C quoting
13
"`echo hi`"
hi
`` and $() are evaluated inside "" (backquotes are retained in actual output)
14
'`echo hi`'
`echo hi`
`` and $() are not evaluated inside '' (backquotes are retained in actual output)
15
'${arr[0]}'
${arr[0]}
array access not possible inside ''
16
"${arr[0]}"
apple
array access works inside ""
17
$'$a\''
$a'
single quotes can be escaped inside ANSI-C quoting
18
"$'\t'"
$'\t'
ANSI-C quoting is not interpreted inside ""
19
'!cmd'
!cmd
history expansion character '!' is ignored inside ''
20
"!cmd"
cmd args
expands to the most recent command matching "cmd"
21
$'!cmd'
!cmd
history expansion character '!' is ignored inside ANSI-C quotes
See also:
ANSI-C quoting with $'' - GNU Bash Manual
Locale translation with $"" - GNU Bash Manual
A three-point formula for quotes
If you're referring to what happens when you echo something, the single quotes will literally echo what you have between them, while the double quotes will evaluate variables between them and output the value of the variable.
For example, this
#!/bin/sh
MYVAR=sometext
echo "double quotes gives you $MYVAR"
echo 'single quotes gives you $MYVAR'
will give this:
double quotes gives you sometext
single quotes gives you $MYVAR
Others explained it very well, and I just want to give something with simple examples.
Single quotes can be used around text to prevent the shell from interpreting any special characters. Dollar signs, spaces, ampersands, asterisks and other special characters are all ignored when enclosed within single quotes.
echo 'All sorts of things are ignored in single quotes, like $ & * ; |.'
It will give this:
All sorts of things are ignored in single quotes, like $ & * ; |.
The only thing that cannot be put within single quotes is a single quote.
Double quotes act similarly to single quotes, except double quotes still allow the shell to interpret dollar signs, back quotes and backslashes. It is already known that backslashes prevent a single special character from being interpreted. This can be useful within double quotes if a dollar sign needs to be used as text instead of for a variable. It also allows double quotes to be escaped so they are not interpreted as the end of a quoted string.
echo "Here's how we can use single ' and double \" quotes within double quotes"
It will give this:
Here's how we can use single ' and double " quotes within double quotes
It may also be noticed that the apostrophe, which would otherwise be interpreted as the beginning of a quoted string, is ignored within double quotes. Variables, however, are interpreted and substituted with their values within double quotes.
echo "The current Oracle SID is $ORACLE_SID"
It will give this:
The current Oracle SID is test
Back quotes are wholly unlike single or double quotes. Instead of being used to prevent the interpretation of special characters, back quotes actually force the execution of the commands they enclose. After the enclosed commands are executed, their output is substituted in place of the back quotes in the original line. This will be clearer with an example.
today=`date '+%A, %B %d, %Y'`
echo $today
It will give this:
Monday, September 28, 2015
Since this is the de facto answer when dealing with quotes in Bash, I'll add upon one more point missed in the answers above, when dealing with the arithmetic operators in the shell.
The Bash shell supports two ways to do arithmetic operation, one defined by the built-in let command and the other the $((..)) operator. The former evaluates an arithmetic expression while the latter is more of a compound statement.
It is important to understand that the arithmetic expression used with let undergoes word-splitting, pathname expansion just like any other shell commands. So proper quoting and escaping need to be done.
See this example when using let:
let 'foo = 2 + 1'
echo $foo
3
Using single quotes here is absolutely fine here, as there isn't any need for variable expansions here. Consider a case of
bar=1
let 'foo = $bar + 1'
It would fail miserably, as the $bar under single quotes would not expand and needs to be double-quoted as
let 'foo = '"$bar"' + 1'
This should be one of the reasons, the $((..)) should always be considered over using let. Because inside it, the contents aren't subject to word-splitting. The previous example using let can be simply written as
(( bar=1, foo = bar + 1 ))
Always remember to use $((..)) without single quotes
Though the $((..)) can be used with double quotes, there isn't any purpose to it as the result of it cannot contain content that would need the double quote. Just ensure it is not single quoted.
printf '%d\n' '$((1+1))'
-bash: printf: $((1+1)): invalid number
printf '%d\n' $((1+1))
2
printf '%d\n' "$((1+1))"
2
Maybe in some special cases of using the $((..)) operator inside a single quoted string, you need to interpolate quotes in a way that the operator either is left unquoted or under double quotes. E.g., consider a case, when you are tying to use the operator inside a curl statement to pass a counter every time a request is made, do
curl http://myurl.com --data-binary '{"requestCounter":'"$((reqcnt++))"'}'
Notice the use of nested double quotes inside, without which the literal string $((reqcnt++)) is passed to the requestCounter field.
There is a clear distinction between the usage of ' ' and " ".
When ' ' is used around anything, there is no "transformation or translation" done. It is printed as it is.
With " ", whatever it surrounds, is "translated or transformed" into its value.
By translation/ transformation I mean the following:
Anything within the single quotes will not be "translated" to their values. They will be taken as they are inside quotes. Example: a=23, then echo '$a' will produce $a on standard output. Whereas echo "$a" will produce 23 on standard output.
A minimal answer is needed for people to get going without spending a lot of time as I had to.
The following is, surprisingly (to those looking for an answer), a complete command:
$ echo '\'
whose output is:
\
Backslashes, surprisingly to even long-time users of bash, do not have any meaning inside single quotes. Nor does anything else.
Got kinda surprised with:
$ node -p 'process.argv' $SHELL '$SHELL' \t '\t' '\\t'
[ 'node', '/bin/bash', '$SHELL', 't', '\\t', '\\\\t' ]
$ python -c 'import sys; print sys.argv' $SHELL '$SHELL' \t '\t' '\\t'
['-c', '/bin/bash', '$SHELL', 't', '\\t', '\\\\t']
Expected the same behavior as with:
$ echo $SHELL '$SHELL' \t '\t' '\\t'
/bin/bash $SHELL t \t \\t
Which is how I need the stuff to be passed in.
Why the extra escape with '\t', '\\t' in process argv? Why handled differently than '$SHELL'? Where's this actually coming from? Why different from the echo behavior?
First I thought this to be some extras on the minimist part, but then got the same with both bare Node.js and Python. Might be missing something obvious here.
Use $'...' form to pass escape sequences like \t, \n, \r, \0 etc in BASH:
python -c 'import sys; print sys.argv' $SHELL '$SHELL' \t $'\t' $'\\t'
['-c', '/bin/bash', '$SHELL', 't', '\t', '\\t']
As per man bash:
Words of the form $'string' are treated specially. The word expands to string, with backslash-escaped characters replaced as specified by the ANSI C standard. Backslash escape sequences, if present, are decoded as follows:
\a alert (bell)
\b backspace
\e
\E an escape character
\f form feed
\n new line
\r carriage return
\t horizontal tab
\v vertical tab
\\ backslash
\' single quote
\" double quote
\nnn the eight-bit character whose value is the octal value nnn (one to three digits)
\xHH the eight-bit character whose value is the hexadecimal value HH (one or two hex digits)
\uHHHH the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value HHHH (one to four hex digits)
\UHHHHHHHH the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value HHHHHHHH (one to eight hex digits)
\cx a control-x character
In both python and node.js, there is a difference between the way print works with scalar strings and the way it works with collections.
Strings are printed simply as a sequence of characters. The resulting output is generally what the user expects to see, but it cannot be used as the representation of the string in the language. But when a list/array is printed out, what you get is a valid list/array literal, which can be used in a program.
For example, in python:
>>> print("x")
x
>>> print(["x"])
['x']
When printing the string, you just see the characters. But when printing the list containing the string, python adds quote characters, so that the output is a valid list literal. Similarly, it would add backslashes, if necessary:
>>> print("\\")
\
>>> print(["\\"])
['\\']
node.js works in exactly the same way:
$ node -p '"\\"'
\
$ node -p '["\\"]'
[ '\\' ]
When you print the string containing a single backslash, you just get a single backslash. But when you print a list/array containing a string consisting of a single backslash, you get a quoted string in which the backslash is escaped with a backslash, allowing it to be used as a literal in a program.
As with the printing of strings in node and python, the standard echo shell utility just prints the actual characters in the string. In a standard shell, there is no mechanism similar to node and python printing of arrays. Bash, however, does provide a mechanism for printing out the value of a variable in a format which could be used as part of a bash program:
$ quote=\"
# $quote is a single character:
$ echo "${#quote}"
1
# $quote prints out as a single quote, as you would expect
$ echo "$quote"
"
# If you needed a representation, use the 'declare' builtin:
$ declare -p quote
declare -- quote="\""
# You can also use the "%q" printf format (a bash extension)
$ printf "%q\n" "$quote"
\"
(References: bash manual on declare and printf. Or type help declare and help printf in a bash session.)
That's not the full story, though. It is also important to understand how the shell interprets what you type. In other words, when you write
some_utility \" "\"" '\"'
What does some_utility actually see in the argv array?
In most contexts in a standard shell (including bash), C-style escapes sequences like \t are not interpreted as such. (The standard shell utility printf does interpret these sequences when they appear in a format string, and some other standard utilities also interpret the sequences, but the shell itself does not.) The handling of backslash by a standard shell depends on the context:
Unquoted strings: the backslash quotes the following character, whatever it is (unless it is a newline, in which case both the backslash and the newline are removed from the input).
Double-quoted strings: backslash can be used to escape the characters $, \, ", `; also, a backslash followed by a newline is removed from the input, as in an unquoted string. In bash, if history expansion is enabled (as it is by default in interactive shells), backslash can also be used to avoid history expansion of !, but the backslash is retained in the final string.
Single-quoted strings: backslash is treated as a normal character. (As a result, there is no way to include a single quote in a single-quoted string.)
Bash adds two more quoting mechanisms:
C-style quoting, $'...'. If a single-quoted string is preceded by a dollar sign, then C-style escape sequences inside the string are interpreted in roughly the same way a C compiler would. This includes the standard whitespace characters such as newline (\n), octal, hexadecimal and unicode escapes (\010, \x0a, \u000A, \U0000000A), plus a few non-C sequences including "control" characters (\cJ) and the ESC character \e or \E (the same as \x1b). Backslashes can also be used to escape \, ' and ". (Note that this is a different list from the list of backslashable characters in double-quoted strings; here, a backslash before a dollar sign or a backtic is not special, while a backslash before a single quote is special; moreover, the backslash-newline sequence is not interpreted.)
Locale-specific Translation: $"...". If a double-quoted string is preceded by a dollar sign, backslashes (and variable expansions and command substitutions) are interpreted as with a normal double-quoted strings, and then the string is looked up in a message catalog determined by the current locale.
(References: Posix standard, Bash manual.)