Since I received so nice and fast solution to my problem, I will try again to get some help from you:
I opened two Recordsets.
Set cmd1.ActiveConnection = cn1
cmd1.CommandText = "SELECT * FROM mov Where [Date] >= #" & DateA & "#;"
Set RSold = cmd1.Execute
Set cmd2.ActiveConnection = cn2
cmd2.CommandText = "SELECT * FROM mov"
Set RSnew = cmd2.Execute
(I want to save only selected records of a file.)
I know how to copy record by record, but is there a 'Short Cut' to do it faster ?
Thanks
try this:
Dim i As Long
Do While Not RSold.EOF
' You can place if condition here
RSNew.AddNew
For i = 0 To RSold.Fields.Count - 1
RSNew.Fields(RSold.Fields(i).Name) = RSold.Fields(i).Value
Next i
RSNew.Update
RSold.MoveNext
Loop
This will copy records from RSold to RSnew recordset
You Can use code :
Set RSNew = RSOld.Clone
#user1838163 :Saving the second Recordset as a file
Dim RFileNm As String
Dim fs
Set fs = CreateObject("Scripting.FileSystemObject")
RFileNm = "c:\temp\" & Trim(RFileNm) & ".adt"
fs.DeleteFile (RFileNm)
RSNew .Save RFileNm, adPersistADTG
RSNew .Close
RSNew .Open RFileNm, , , , adCmdFile
I think this will do what you want by doing it all at once.
Dim objPB As New PropertyBag
objPB.WriteProperty "rs", RSOld
Set RSNew = objPB.ReadProperty("rs")
Set objPB = Nothing
I don't think CLONE is going to do what you want. It just gives you another view of the same recordset you already have. This allows you to use multiple bookmarks and so forth, but the recordset is still attached to the same database the original was. I also need a way to copy the recordset and save it to a new database in a new format.
Related
Hi Everyone I am having trouble getting a ComboBox to sort, when another combobox is selected.
I think I have the Right SQL Syntax but I cant seem to get the vba to run it through; currently the vba returns all of the states in the recordset regardless of the company.
Private Sub CboCountry_Click()
Set db = CurrentDb
Dim SQLStr As String
Set RsState = db.OpenRecordset("T2States", dbOpenSnapshot, dbSeeChanges)
'populates combobox with recordset, that is defined by the country input from the form
RsState.MoveFirst
Do While Not RsState.EOF
Me.CboState.RowSource = Me.CboState.RowSource & RsState("StateID") & ";" & RsState("State") & ";"
RsState.MoveNext
Loop
I think this is the right SQL String but I'm having trouble to get it to work.
'SQLStr = "SELECT T2States.StateID, T2States.States, T2States.CountryID" & _
" FROM T2States GROUP BY T2States.StatesID" & _
" WHERE T2States.CountryID = """ & Me.CboCountry.Value & """"
Any help will be greatly appreciated.
Edit#1
See Full Code below, the error that pops up when I substitute SQLStr into the Openrecordset is a Run-time error '3078' the microsoft access database engine cannot find the input table or query 'SQLStr'. Make sure it exists and that its name is spelled correctly.
What should happen is when a country is selected from CboCountry combobox, it will load the CboState combobox by sorting the recordset by CountryID
see below for both code parts
Private Sub Form_Load()
Set db = CurrentDb
Set RsCompany = db.OpenRecordset("T1Company", dbOpenDynaset, dbSeeChanges)
Set RsCountry = db.OpenRecordset("T2Countries", dbOpenSnapshot, dbSeeChanges)
Set RsAddress = db.OpenRecordset("T1Addresses", dbOpenDynaset, dbSeeChanges)
Set RsAddressType = db.OpenRecordset("T2AddressType", dbOpenSnapshot, dbSeeChanges)
Set RsCompanyAddress = db.OpenRecordset("T3Company_Address", dbOpenDynaset, dbSeeChanges)
Me.CboCountry = Null
Me.TxtAddress1 = Null
Me.TxtAddress2 = Null
Me.TxtAddress3 = Null
Me.TxtCity = Null
Me.CboAddressType = Null
Me.CboCountry = Null
Me.CboState = Null
Me.TxtPostalCode = Null
Me.TxtCompanyID = Null
Me.TxtLegalName = Null
Me.TxtNickname = Null
Me.TxtAddressID = Null
RsCountry.MoveFirst
Do While Not RsCountry.EOF
Me.CboCountry.RowSource = Me.CboCountry.RowSource & RsCountry("CountryID") & ";" & RsCountry("Country") & ";"
RsCountry.MoveNext
Loop
RsAddressType.MoveFirst
Do While Not RsAddressType.EOF
Me.CboAddressType.RowSource = Me.CboAddressType.RowSource & RsAddressType("AddressTypeID") & ";" & RsAddressType("AddressType") & ";"
RsAddressType.MoveNext
Loop
Me.TxtLegalName.SetFocus
End Sub
Private Sub CboCountry_Click()
Set db = CurrentDb
Dim SQLStr As String
'SQLStr = "SELECT T2States.StateID, T2States.State, T2States.CountryID" & _
" FROM T2States" & _
" WHERE T2States.CountryID = """ & Me.CboCountry.Value & """"
Set RsState = db.OpenRecordset("T2States", dbOpenDynaset, dbSeeChanges)
'populates combobox with recordset, that is defined by the country input from the form
RsState.MoveFirst
Do While Not RsState.EOF
Me.CboState.RowSource = Me.CboState.RowSource & RsState("StateID") & ";" & RsState("State") & ";"
RsState.MoveNext
Loop
End Sub
Let us see
1- sure you've to append with
Having T2States.States, T2States.CountryID
2- Error exist in it, extra 's' in the Column name:
GROUP BY T2States.StatesID
3- put all the code and i'll check with you what you miss.
best regards
This one turned out to be a quick fix in the Property Sheet under the DATA tab, the Row Source Type had to be changed back to 'Table/Query' from a 'Value'.
There is VBA that could account for this but it was just a simple as changing that Row Source.
The Reason for the mix up, for a quick bit of background if it helps, is that all my combo boxes are unbound and I was binding them with VBA Recordsets so the rowsource has to be a value list - Essentially the VBA is writing the list everytime it loads.
Where as when I started using SQL to generate the recordset, even though it was in VBA I had to change the property back to Table/Query.
Thanks.
Im currently facing problem where the Component GUID of msi are in lower case. Need to convert all the Component GUID to upper case, hence wrote a small script as below:
VBS:
msi_fullpath = <Path of msi>
Dim strLine
strLine = "UPDATE Component SET ComponentId = UPPER(ComponentId)"
Set WI = CreateObject("WindowsInstaller.Installer")
Set DB = WI.OpenDatabase(msi_fullpath, 1)
' Update
Set view = DB.OpenView(strLine)
view.Execute
DB.Commit
View.Close
Set view = Nothing
Set DB = Nothing
Set WI = Nothing
However the above does not work. Can someone please help?
I'm trying to add records to an exisiting table called "Topics" (section as of "For Each SelectedTopic In SelectedTopicsCtl.ItemsSelected" in the code below).
When executing the code i always get "Run-time error '3022': The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. So it goes wrong at the creation of the Autonumber in the field "ID" (= the only field that is indexed - no duplicates).
When debugging, line "TopicRecord.Update" in the code below is highlighted.
I have read several posts on this topic on this forum and on other forums but still cannot get this to work - i must be overlooking something....
Private Sub Copy_Click()
Dim JournalEntrySourceRecord, JournalEntryDestinationRecord, TopicRecord As Recordset
Dim JournalEntryToCopyFromCtl, JournalEntryToCopyToCtl, JournalEntryDateCreatedCtl, SelectedTopicsCtl As Control
Dim Counter, intI As Integer
Dim SelectedTopic, varItm As Variant
Set JournalEntryToCopyFromCtl = Forms![Copy Journal Entry]!JournalEntryToCopyFrom
Set JournalEntryToCopyToCtl = Forms![Copy Journal Entry]!JournalEntryToCopyTo
Set JournalEntryDateCreatedCtl = Forms![Copy Journal Entry]!JournalEntryDateCreated
Set JournalEntrySourceRecord = CurrentDb.OpenRecordset("Select * from JournalEntries where ID=" & JournalEntryToCopyFromCtl.Value)
Set JournalEntryDestinationRecord = CurrentDb.OpenRecordset("Select * from JournalEntries where ID=" & JournalEntryToCopyToCtl.Value)
Set SelectedTopicsCtl = Forms![Copy Journal Entry]!TopicsToCopy
Set TopicRecord = CurrentDb.OpenRecordset("Topics", dbOpenDynaset, dbSeeChanges)
With JournalEntryDestinationRecord
.Edit
.Fields("InitiativeID") = JournalEntrySourceRecord.Fields("InitiativeID")
.Fields("DateCreated") = JournalEntryDateCreatedCtl.Value
.Fields("Comment") = JournalEntrySourceRecord.Fields("Comment")
.Fields("Active") = "True"
.Fields("InternalOnly") = JournalEntrySourceRecord.Fields("InternalOnly")
.Fields("Confidential") = JournalEntrySourceRecord.Fields("Confidential")
.Update
.Close
End With
JournalEntrySourceRecord.Close
Set JournalEntrySourceRecord = Nothing
Set JournalEntryDestinationRecord = Nothing
For Each SelectedTopic In SelectedTopicsCtl.ItemsSelected
TopicRecord.AddNew
For Counter = 3 To SelectedTopicsCtl.ColumnCount - 1
TopicRecord.Fields(Counter) = SelectedTopicsCtl.Column(Counter, SelectedTopic)
Next Counter
TopicRecord.Fields("JournalEntryID") = JournalEntryToCopyToCtl.Value
TopicRecord.Fields("DateCreated") = JournalEntryDateCreatedCtl.Value
TopicRecord.Update
Next SelectedTopic
TopicRecord.Close
Set TopicRecord = Nothing
End Sub
First, your Dims won't work as you expect. Use:
Dim JournalEntrySourceRecord As Recordset
Dim JournalEntryDestinationRecord As Recordset
Dim TopicRecord As Recordset
Second, it looks like you get your ID included here:
TopicRecord.Fields(Counter)
or Topic is a query that includes it somehow. Try to specify the fields specifically and/or debug like this:
For Counter = 3 To SelectedTopicsCtl.ColumnCount - 1
TopicRecord.Fields(Counter).Value = SelectedTopicsCtl.Column(Counter, SelectedTopic)
Debug.Print Counter, TopicRecord.Fields(Counter).Name
Next Counter
I'm very new (1 week) to visual basic and basically I'm trying to automate some repetitive work, now to the point , within a number of files produced with varying data I need to format the selected range as a table (medium 9) but i'm in a block at the moment and need some help and would really appreciate it, here is what i have so far>>>>
Option Explicit
Dim strDate, strRepDate, strPath, strPathRaw , strDate2
dim dteTemp, dteDay, dteMth, dteYear, newDate, myDate
myDate = Date()
dteTemp = DateAdd("D", -1, myDate)
dteDay = DatePart("D", dteTemp)
dteMth = DatePart("M", dteTemp)
dteYear = DatePart("YYYY", dteTemp)
If (Len(dteDay) = 1) Then dteDay = "0" & dteDay
If (Len(dteMth) = 1) Then dteMth = "0" & dteMth
strDate = dteYear&"-"&dteMth&"-"&dteDay
strDate2 = dteYear&""&dteMth&""&dteDay
Dim objXLApp, objXLWb, objXLWs
Set objXLApp = CreateObject("Excel.Application")
Set objXLWb = objXLApp.Workbooks.Open("C:\Users\CuRrY\Desktop\"&strDate2&"\Agent Daily Disposition "&strDate2&".xls")
objXLApp.Application.Visible = True
'start excell
Set objXLWs = objXLWb.Sheets(1)
'objXLWs.Cells(Row, Column ).Value
With objXLWs
objXLWs.Cells(3, 1).Value = "Agent Name"
'objXLWs.Range("A3").Select
objXLWs.Range("A3").CurrentRegion.Select
'End With
as you can see i reached as far as CurrentRegion.Select but how to format selected cells into (medium 9) i've tried so much and failed
Thanks for any help
You can configure the CurrentRegion(which represents a Range object) through the SpecialCells Submethod. Although your conditions are specific to your xls sheet, you will still have to follow the formatting available through the specialcells() method properties. Also, by utilizing the currentregion property, the page assumes you have a xls header. So it is important to verify your table structure before trying to incorporate this property.
For instance:
Sub FillIn()
Range("A1").CurrentRegion.SpecialCells(xlCellTypeBlanks).FormulaR1C1 _
= "=R[-1]C"
Range("A1").CurrentRegion.Value = Range("A1").CurrentRegion.Value
End Sub
View the available properties that can be applied to CurrentRegion -> Here
And the MSDN Article -> Here
I'm working on a asp-classic vbscript website and am curious if there is a way to display the tables in a database. I have looked online and saw some examples but they don't explain what to actually do with the code. I am VERY new so if someone could make this make sense for me that would be awesome.
DBMS: Microsoft SQL Server
Set Cat = CreateObject("ADOX.Catalog")
Cat.ActiveConnection = "Provider=sqloledb;Data Source=myServerAddress;Initial Catalog=myDataBase;User Id=myUsername;Password=myPassword;"
For Each Table In Cat.Tables
WScript.Echo Table.Name
Next
To get you started:
Const adSchemaTables = 20 ' 00000014
Dim sCS : sCS = "...your connection string..."
Dim oDb : Set oDb = CreateObject("ADODB.CONNECTION")
oDb.Open sCS
Dim oRs : Set oRs = oDb.OpenSchema(adSchemaTables)
Do Until oRs.EOF
If oRs("TABLE_TYPE") = "TABLE" Then WScript.Echo oRs("TABLE_NAME")
oRs.MoveNext
Loop
[If you really don't know about connectionstrings, look here.