I have following configuration:
Jenkins Master - runs on windows+tomacat, Jenkins Slave - runs on gentoo
Slave is reachable by ssh and master can start it without problems. However initiating any connection other way around is not possible.
Problem is that code repositories are on master side and it seems slave tries to fetch from repositories before build and it fails (obviously).
I could push data to slave but I don't know how to execute any command on master side before build script kicks in. Also, I'm not sure is SCM polling initiated on master or on slave machine?
Where, there is a Copy to slave plugin which can push the files from the master machine to the slave. Additionaly one can choose to use the Slave Setup plugin to propagate the environment and all dependencies to the slave while it is starting/connecting.
But it seems like it is rather a conceptual issue with how the file/code repositories are being accessed from the slave machine. Usually this stuff is being handled by SCM plugin and as long you have an accessible repository on the master or any other machine, this should be fairly straight-forward. I do believe it would help if you could describe that part a little better.
Related
I've forked a project repo from master and created my own tests (.mygitlab_ci.yaml) that are supposed to extend those of the master repo and run on a locally dedicated machine that replicates the env of the master repo runner machine.
I expected a MR towards master to trigger the CI of master, on the master elected runner, but the CI appears to keep running my tests, not master's.
Is there a way to control this behavior?
I'm afraid there is no way to achieve it.
The only way I found was to push a side branch upstream to the master repo and issue the merge request from the side branch within master repo.
I'm trying to run a test cluster locally following this guide https://mesosphere.com/2014/07/07/installing-mesos-on-your-mac-with-homebrew/
Currently, I'm able to have a master running at localhost:5050 and a slave running at the default port 5051 (with slave id say S0). However, when I tried to start another slave at a different port, it re-registered itself as S0 and the master console only showed 1 activated slave. Does anybody know how would I start another slave S1? Thanks!
Did you specify a another work_dir?
E.g.
sudo /usr/local/sbin/mesos-slave --master=localhost:5050 --port=5052 -- work_dir=/tmp/mesos2
To explain a bit why this is needed/ where the error you saw came from.
Mesos supports so called slave recovery for helping with upgrades and error recovery.
Therefore when starting a slave, it will check its work_dir for checkpoint and try to recover that state (i.e. reconnect to still running executors).
In your case as both slaves wanted to start from the same working directory, the second one tried to recover the checkpoint of the still running first slave...
P.S. I should probably replace all the above occurences of slave with worker (https://issues.apache.org/jira/browse/MESOS-1478), but I hope this is easier to read.
I had installed my jenkins master in the linux.
slave in the windows environment.
I am trying to call the batch script presented in the slave(windows) machine.
But I am not able to do this.
If any one this please let me know.
On the master job configuration, have you checked the Restrict where this project can be run checkbox and entered the slave name in the Label Expression?
To enter a Label expression, you first need to add the slave as a node on the master: Manage Jenkins -> Manage Nodes -> New Node
Some further info on configuring slaves can be found here
I am using a jenkins configuration where the same job is being executed in different locations: one in farm1 and another in an overseas farm2.
The Jenkins master server is located in farm1.
I encounter a situation where the job on farm2 takes much more time to finish, sometimes twice the elapsed time.
Do you have an idea what could be the reason for that?
is there a continuous master-slave discussion during the build that can cause such delay?
The job is a maven junit test + ui seleniun using vnc server on the slave
Thanks in advance,
Roy
I assume your server farms have identical hardware specs?
Network differences while checking out code, downloading dependencies, etc. Workspace of Master and Slave are on different servers
If you are archiving artifacts, they are usually archived back on Master, even when the job is run on Slave.
Install Timestamper plugin, enable it, and then review the logs of both the Master and the Slave runs, and see where there is a big time difference (you can configure Timestamper to show time as increments from the start of job, this would be helpful here)
We are migrating from CruiseControl.NET to Jenkins just to be in sync with a partner so we don't have two different CI scripts. We are trying to setup Jenkins to do something similar to what we had CruiseControl doing which was have a centralized server invoke projects (jobs in jenkins) on remote build machines.
We have multiple build machines associated to a single project so when we build the project from the centralized CI server it would invoke the projects on the remote CI servers. The remote CI servers would pull the version from the centralized CI server project.
In CruiseCruise control we setup a project that would do a forceBuild on the remote projects. The projects on the build machines used a remoteProjectLabeller to retrieve the version number so they were always in sync.
To retrieve the master build number:
<labeller type="remoteProjectLabeller">
<project>MainProject</project>
<serverUri>tcp://central-server:21234/CruiseManager.rem</serverUri>
</labeller>
To invoke the remote projects:
<forcebuild>
<project>RemoteBuildMachineA</project>
<serverUri>tcp://remote-server:21234/CruiseManager.rem</serverUri>
<integrationStatus>Success</integrationStatus>
</forcebuild>
So far in jenkins i've setup a secondary server as a slave using the java web start but I don't know how I would have the master jenkins invoke the projects setup on the slaves.
Can I setup Jenkins to invoke projects (jobs) on slaves?
Can I make the slaves pull the version number from the master?
EDIT -
Let me add some more info.
The master, and remote build machine slaves are all running Windows.
We had the central master CruiseControl kick off the remote projects at the same time so they ran concurrently and would like to have the same thing with jenkins if possible.
Jenkins has the concept of build agents, which could perhaps fit your scenario better - there's a master that triggers the build and slaves that perform it. A build can be then restricted to some categories of slaves only (e.g. if it depends on a specific software, not present on all agents). All data is managed centrally by the master, which I believe is what you are trying to achieve.
In Jenkins it is not possible to trigger a build on a slave, i.e. where a build runs is not controlled by the one who triggers it. It is controlled by the settings of the job itself. Each job has a setting called "Restrict where this job can run".
In your case you would probably have two jobs: A and B. A would be restricted to run on "master" and B would be configured to run on "slavename". Then all that is left to do is for A to trigger B.
But you had further constraints: You want A and B check out the same version from version control and you want A and B to run in parallel. There are many ways to accomplish that but the easiest is probably to define a multi-configuration job.
There is no way to turn an existing free-style job into a multi-configuration job, so you will have to make a new job.
Choose New job
Choose Build new multi-configuration project. Add a name.
Under Configuration Matrix, open the "Add axis" drop down.
Choose Slaves
Check master and the slave
Add the SCM information and build step(s)
When the job runs, it runs on both the master and the slave. Jenkins makes sure they build from the same source version.
From the /jenkins/computer url, you can add, remove, and reconfigured "nodes" which are either local or remote "build agents".
The Jobs can then be constrained to run on particular build agents, or follow various rules to select the appropriate build agent out of the available agents.
I was thinking about Jenkins too much like CruiseControl where the job is defined on the remote machine. So in Jenkins the remote projects are defined on the master and delegated to a remote machine via an agent.
I used the Java Web Start agent installed as a windows service on the remote machines. To have specific jobs run on specific remote machines I defined each remote node with a unique label in its slave configuration. To bind specific jobs to specific slaves I used the slave's label in each job configuration ("Restrict where this project can be run").
To trigger the jobs with a single master job I created a free style job that only is set to "Build other projects" and provided a comma separated list or project names. This job builds the downstream jobs in parallel.
I'm still looking for a way to send a master build number to the downstream jobs to keep them in sync always. (This is used to version DLLs and such.)