Related
Inspired by some Conor Hoekstra YouTube videos, I tried doing some baby steps in APL and also convert my small lines to point-free style. But for this (percentage of rolls of 4, 5, or 6 in 1000 die-6 rolls) I can't wrap my head around how to eliminate the omega before the reshape.
{(+/3<?⍵⍴6)×100÷⍵}1000
Let's take it step by step:
{(+/3<?⍵⍴6)×100÷⍵}
First we need to express every part of the function that uses the argument, as a function of the argument. The multiplication combines the two main parts:
{+/3<?⍵⍴6}×{100÷⍵}
In the rightmost part, {100÷⍵}, we need the argument. There are a couple of ways we can deal with this:
We can use an identity function ⊢ to represent it: 100÷⊢
We can bind (a.k.a. curry) the left argument, 100, to the function ÷ yielding a monadic function: 100∘÷
Let's take the last approach:
{+/3<?⍵⍴6}×100∘÷
In the left part, {+/3<?⍵⍴6}, we can do the same, but need to watch out for two things, and each can be dealt with in a few different ways:
We have a constant, 6, as the rightmost part of our function.
We can change the constant into a constant function: 6⍨
We can commute (a.k.a. swap or switch) the arguments of ⍴ and use an identity function: 6⍴⍨⊢
We can bind the right argument, 6, to the function ⍴ yielding a monadic function: ⍴∘6
We have a monadic function, ?, in the middle.
We can compose ? atop ⍴: ?⍤⍴
We can compose ? beside <: <∘?
Let's take the last approach for each problem:
(+/3<∘?⍴∘6)×100∘÷
This is a fully tacit equivalent to the monadic function {(+/3<?⍵⍴6)×100÷⍵}. However, there's one more trick we can use to eliminate the parenthesis. Since × is commutative, we can swap its arguments to put the more involved expression on the right:
100∘÷×(+/3<∘?⍴∘6)
However, now we have the problem of the monadic +/ in the middle. Observe that < sees a vector on the right and a scalar on the left. In the case of F/s G v for scalar functions F and G with scalar s and vector v the inner product s F.G v is equivalent, so we can combine the summation with the comparison as follows:
100∘÷×3+.<∘?⍴∘6
Alternatively, we can observer that summation is equivalent to evaluation in base 1 because the place values in base 1 are (…,12, 11, 10) = (…, 1, 1, 1) so if we have the list (…, c, b, a) and evaluate it as a number in base 1, we get:
(… + c×12 + b×11 + a×10) =
(… + c×1 + b×1 + a×10) =
(… + c + b×1 + a×1) =
(… + c + b + a)
That is, the sum of our list. We can write this as:
100∘÷×1⊥3<∘?⍴∘6
I am reading SICP's first chapter
1.1.3 Evaluating Combinations
It states that
To evaluate a combination, do the following:
1. Evaluate the subexpressions of the combination.
2. Apply the procedure that is the value of the leftmost subexpression (the operator) to the arguments that are the values of the other subexpressions (the operands).
Suppose an combination (+ 1 2)
According to the above algorithms,
The first is to evaluate (retrieve) + 1 and 2)
The second is to apply + to 1 (store the intermediate state)
The third is to evaluate(retrieve) the intermediate state and 2 again.
The forth is to apply the intermediate state to 2.
Is it right?
What' the intermediate state of +1?
The expression (+ 1 2) is a combination composed by the primitive expressions: +, 1, and 2.
The first step says to evaluate all the subexpressions. In this case they are, respectively, the operator which performs the sum of numbers, and the numbers corresponding to the numerals 1 and 2, respectively.
So you have an operator, and two numeric values. The second step says that you must apply the operator (leftmost value) to the two numbers: in other words you must apply the sum operator to 1 and 2, so to obtain the number 3. And the process terminate.
Note that there are no intermediate states in this computation.
The second is to apply + to 1
No, the second step is to call the function + with the argument values of 1 and 2.
This then computes the sum of 1 and 2 and returns 3.
A is a set of real numbers. Really confused as to what this line does. The numerator looks like its taking the subset of A that does not contain the smallest value. The denominator appears to be the range. How can you divide the resulting subset by the range? Or perhaps that is not what the numerator is doing?
A <- (A - min(A)) * (max(A) - min(A))^-1
^-1 means take the matrix inverse not the reciprocal
Assuming A is an matrix of real numbers, then the expression can be broken down as follows:
let mna = min(A) : Scalar - the minimum value of A
let mxa = max(A) : Scalar - the maximum value of A
let N = (A-min(A)) = Array - Scalar - each element of A minus mna
let X = (A-max(A)) ... minus mxa
so we have
N*inverse(X)
... Which would be true if I had put my glasses on and read the expression properly instead of as A <- (A - min(A)) * (A - max(A))^-1
However, as the expression is actually A <- (A - min(A)) * (max(A) - min(A))^-1, the explanation is different.
The expression for N is the same (although I note parenthetically that an expression of the form (array - scalar/conformable-array) means subtract; it is not an array element deletion operation).
However, (max(A) - min(A)) is what it looks like, the maximum value of A minus it's minimum value, and the ^-1 in this instance does mean divide.
The expression therefore returns A with all values scaled to lie between 0 (==min(A)) and 1 (==max(A)).
The <- at the start of the expression is Mathcad's local definition operator (used to assign values in a Mathcad "program") and simply assigns the normalized value of A back to A.
I'm working on a homework problem that asks me this:
Tiven a finite set of numbers, and a target number, find if the set can be used to calculate the target number using basic math operations (add, sub, mult, div) and using each number in the set exactly once (so I need to exhaust the set). This has to be done with recursion.
So, for example, if I have the set
{1, 2, 3, 4}
and target 10, then I could get to it by using
((3 * 4) - 2)/1 = 10.
I'm trying to phrase the algorithm in pseudo-code, but so far haven't gotten too far. I'm thinking graphs are the way to go, but would definitely appreciate help on this. thanks.
This isn't meant to be the fastest solution, but rather an instructive one.
It recursively generates all equations in postfix notation
It also provides a translation from postfix to infix notation
There is no actual arithmetic calculation done, so you have to implement that on your own
Be careful about division by zero
With 4 operands, 4 possible operators, it generates all 7680 = 5 * 4! * 4^3
possible expressions.
5 is Catalan(3). Catalan(N) is the number of ways to paranthesize N+1 operands.
4! because the 4 operands are permutable
4^3 because the 3 operators each have 4 choice
This definitely does not scale well, as the number of expressions for N operands is [1, 8, 192, 7680, 430080, 30965760, 2724986880, ...].
In general, if you have n+1 operands, and must insert n operators chosen from k possibilities, then there are (2n)!/n! k^n possible equations.
Good luck!
import java.util.*;
public class Expressions {
static String operators = "+-/*";
static String translate(String postfix) {
Stack<String> expr = new Stack<String>();
Scanner sc = new Scanner(postfix);
while (sc.hasNext()) {
String t = sc.next();
if (operators.indexOf(t) == -1) {
expr.push(t);
} else {
expr.push("(" + expr.pop() + t + expr.pop() + ")");
}
}
return expr.pop();
}
static void brute(Integer[] numbers, int stackHeight, String eq) {
if (stackHeight >= 2) {
for (char op : operators.toCharArray()) {
brute(numbers, stackHeight - 1, eq + " " + op);
}
}
boolean allUsedUp = true;
for (int i = 0; i < numbers.length; i++) {
if (numbers[i] != null) {
allUsedUp = false;
Integer n = numbers[i];
numbers[i] = null;
brute(numbers, stackHeight + 1, eq + " " + n);
numbers[i] = n;
}
}
if (allUsedUp && stackHeight == 1) {
System.out.println(eq + " === " + translate(eq));
}
}
static void expression(Integer... numbers) {
brute(numbers, 0, "");
}
public static void main(String args[]) {
expression(1, 2, 3, 4);
}
}
Before thinking about how to solve the problem (like with graphs), it really helps to just look at the problem. If you find yourself stuck and can't seem to come up with any pseudo-code, then most likely there is something that is holding you back; Some other question or concern that hasn't been addressed yet. An example 'sticky' question in this case might be, "What exactly is recursive about this problem?"
Before you read the next paragraph, try to answer this question first. If you knew what was recursive about the problem, then writing a recursive method to solve it might not be very difficult.
You want to know if some expression that uses a set of numbers (each number used only once) gives you a target value. There are four binary operations, each with an inverse. So, in other words, you want to know if the first number operated with some expression of the other numbers gives you the target. Well, in other words, you want to know if some expression of the 'other' numbers is [...]. If not, then using the first operation with the first number doesn't really give you what you need, so try the other ops. If they don't work, then maybe it just wasn't meant to be.
Edit: I thought of this for an infix expression of four operators without parenthesis, since a comment on the original question said that parenthesis were added for the sake of an example (for clarity?) and the use of parenthesis was not explicitly stated.
Well, you didn't mention efficiency so I'm going to post a really brute force solution and let you optimize it if you want to. Since you can have parantheses, it's easy to brute force it using Reverse Polish Notation:
First of all, if your set has n numbers, you must use exactly n - 1 operators. So your solution will be given by a sequence of 2n - 1 symbols from {{your given set}, {*, /, +, -}}
st = a stack of length 2n - 1
n = numbers in your set
a = your set, to which you add *, /, +, -
v[i] = 1 if the NUMBER i has been used before, 0 otherwise
void go(int k)
{
if ( k > 2n - 1 )
{
// eval st as described on Wikipedia.
// Careful though, it might not be valid, so you'll have to check that it is
// if it evals to your target value great, you can build your target from the given numbers. Otherwise, go on.
return;
}
for ( each symbol x in a )
if ( x isn't a number or x is a number but v[x] isn't 1 )
{
st[k] = x;
if ( x is a number )
v[x] = 1;
go(k + 1);
}
}
Generally speaking, when you need to do something recursively it helps to start from the "bottom" and think your way up.
Consider: You have a set S of n numbers {a,b,c,...}, and a set of four operations {+,-,*,/}. Let's call your recursive function that operates on the set F(S)
If n is 1, then F(S) will just be that number.
If n is 2, F(S) can be eight things:
pick your left-hand number from S (2 choices)
then pick an operation to apply (4 choices)
your right-hand number will be whatever is left in the set
Now, you can generalize from the n=2 case:
Pick a number x from S to be the left-hand operand (n choices)
Pick an operation to apply
your right hand number will be F(S-x)
I'll let you take it from here. :)
edit: Mark poses a valid criticism; the above method won't get absolutely everything. To fix that problem, you need to think about it in a slightly different way:
At each step, you first pick an operation (4 choices), and then
partition S into two sets, for the left and right hand operands,
and recursively apply F to both partitions
Finding all partitions of a set into 2 parts isn't trivial itself, though.
Your best clue about how to approach this problem is the fact that your teacher/professor wants you to use recursion. That is, this isn't a math problem - it is a search problem.
Not to give too much away (it is homework after all), but you have to spawn a call to the recursive function using an operator, a number and a list containing the remaining numbers. The recursive function will extract a number from the list and, using the operation passed in, combine it with the number passed in (which is your running total). Take the running total and call yourself again with the remaining items on the list (you'll have to iterate the list within the call but the sequence of calls is depth-first). Do this once for each of the four operators unless Success has been achieved by a previous leg of the search.
I updated this to use a list instead of a stack
When the result of the operation is your target number and your list is empty, then you have successfully found the set of operations (those that traced the path to the successful leaf) - set the Success flag and unwind. Note that the operators aren't on a list nor are they in the call: the function itself always iterates over all four. Your mechanism for "unwinding" the operator sequence from the successful leaf to get the sequence is to return the current operator and number prepended to the value returned by recursive call (only one of which will be successful since you stop at success - that, obviously, is the one to use). If none are successful, then what you return isn't important anyhow.
Update This is much harder when you have to consider expressions like the one that Daniel posted. You have combinatorics on the numbers and the groupings (numbers due to the fact that / and - are order sensitive even without grouping and grouping because it changes precedence). Then, of course, you also have the combinatorics of the operations. It is harder to manage the differences between (4 + 3) * 2 and 4 + (3 * 2) because grouping doesn't recurse like operators or numbers (which you can just iterate over in a breadth-first manner while making your (depth-first) recursive calls).
Here's some Python code to get you started: it just prints all the possible expressions, without worrying too much about redundancy. You'd need to modify it to evaluate expressions and compare to the target number, rather than simply printing them.
The basic idea is: given a set S of numbers, partition S into two subsets left and right in all possible ways (where we don't care about the order or the elements in left and right), such that left and right are both nonempty. Now for each of these partitions, find all ways of combining the elements in left (recursively!), and similarly for right, and combine the two resulting values with all possible operators. The recursion bottoms out when a set has just one element, in which case there's only one value possible.
Even if you don't know Python, the expressions function should be reasonably easy to follow; the splittings function contains some Python oddities, but all it does is to find all the partitions of the list l into left and right pieces.
def splittings(l):
n = len(l)
for i in xrange(2**n):
left = [e for b, e in enumerate(l) if i & 2**b]
right = [e for b, e in enumerate(l) if not i & 2**b]
yield left, right
def expressions(l):
if len(l) == 1:
yield l[0]
else:
for left, right in splittings(l):
if not left or not right:
continue
for el in expressions(left):
for er in expressions(right):
for operator in '+-*/':
yield '(' + el + operator + er + ')'
for x in expressions('1234'):
print x
pusedo code:
Works(list, target)
for n in list
tmp=list.remove(n)
return Works(tmp,target+n) or Works(tmp,target-n) or Works(tmp, n-target) or ...
then you just have to put the base case in. I think I gave away to much.
I'm working on a homework problem that asks me this:
Tiven a finite set of numbers, and a target number, find if the set can be used to calculate the target number using basic math operations (add, sub, mult, div) and using each number in the set exactly once (so I need to exhaust the set). This has to be done with recursion.
So, for example, if I have the set
{1, 2, 3, 4}
and target 10, then I could get to it by using
((3 * 4) - 2)/1 = 10.
I'm trying to phrase the algorithm in pseudo-code, but so far haven't gotten too far. I'm thinking graphs are the way to go, but would definitely appreciate help on this. thanks.
This isn't meant to be the fastest solution, but rather an instructive one.
It recursively generates all equations in postfix notation
It also provides a translation from postfix to infix notation
There is no actual arithmetic calculation done, so you have to implement that on your own
Be careful about division by zero
With 4 operands, 4 possible operators, it generates all 7680 = 5 * 4! * 4^3
possible expressions.
5 is Catalan(3). Catalan(N) is the number of ways to paranthesize N+1 operands.
4! because the 4 operands are permutable
4^3 because the 3 operators each have 4 choice
This definitely does not scale well, as the number of expressions for N operands is [1, 8, 192, 7680, 430080, 30965760, 2724986880, ...].
In general, if you have n+1 operands, and must insert n operators chosen from k possibilities, then there are (2n)!/n! k^n possible equations.
Good luck!
import java.util.*;
public class Expressions {
static String operators = "+-/*";
static String translate(String postfix) {
Stack<String> expr = new Stack<String>();
Scanner sc = new Scanner(postfix);
while (sc.hasNext()) {
String t = sc.next();
if (operators.indexOf(t) == -1) {
expr.push(t);
} else {
expr.push("(" + expr.pop() + t + expr.pop() + ")");
}
}
return expr.pop();
}
static void brute(Integer[] numbers, int stackHeight, String eq) {
if (stackHeight >= 2) {
for (char op : operators.toCharArray()) {
brute(numbers, stackHeight - 1, eq + " " + op);
}
}
boolean allUsedUp = true;
for (int i = 0; i < numbers.length; i++) {
if (numbers[i] != null) {
allUsedUp = false;
Integer n = numbers[i];
numbers[i] = null;
brute(numbers, stackHeight + 1, eq + " " + n);
numbers[i] = n;
}
}
if (allUsedUp && stackHeight == 1) {
System.out.println(eq + " === " + translate(eq));
}
}
static void expression(Integer... numbers) {
brute(numbers, 0, "");
}
public static void main(String args[]) {
expression(1, 2, 3, 4);
}
}
Before thinking about how to solve the problem (like with graphs), it really helps to just look at the problem. If you find yourself stuck and can't seem to come up with any pseudo-code, then most likely there is something that is holding you back; Some other question or concern that hasn't been addressed yet. An example 'sticky' question in this case might be, "What exactly is recursive about this problem?"
Before you read the next paragraph, try to answer this question first. If you knew what was recursive about the problem, then writing a recursive method to solve it might not be very difficult.
You want to know if some expression that uses a set of numbers (each number used only once) gives you a target value. There are four binary operations, each with an inverse. So, in other words, you want to know if the first number operated with some expression of the other numbers gives you the target. Well, in other words, you want to know if some expression of the 'other' numbers is [...]. If not, then using the first operation with the first number doesn't really give you what you need, so try the other ops. If they don't work, then maybe it just wasn't meant to be.
Edit: I thought of this for an infix expression of four operators without parenthesis, since a comment on the original question said that parenthesis were added for the sake of an example (for clarity?) and the use of parenthesis was not explicitly stated.
Well, you didn't mention efficiency so I'm going to post a really brute force solution and let you optimize it if you want to. Since you can have parantheses, it's easy to brute force it using Reverse Polish Notation:
First of all, if your set has n numbers, you must use exactly n - 1 operators. So your solution will be given by a sequence of 2n - 1 symbols from {{your given set}, {*, /, +, -}}
st = a stack of length 2n - 1
n = numbers in your set
a = your set, to which you add *, /, +, -
v[i] = 1 if the NUMBER i has been used before, 0 otherwise
void go(int k)
{
if ( k > 2n - 1 )
{
// eval st as described on Wikipedia.
// Careful though, it might not be valid, so you'll have to check that it is
// if it evals to your target value great, you can build your target from the given numbers. Otherwise, go on.
return;
}
for ( each symbol x in a )
if ( x isn't a number or x is a number but v[x] isn't 1 )
{
st[k] = x;
if ( x is a number )
v[x] = 1;
go(k + 1);
}
}
Generally speaking, when you need to do something recursively it helps to start from the "bottom" and think your way up.
Consider: You have a set S of n numbers {a,b,c,...}, and a set of four operations {+,-,*,/}. Let's call your recursive function that operates on the set F(S)
If n is 1, then F(S) will just be that number.
If n is 2, F(S) can be eight things:
pick your left-hand number from S (2 choices)
then pick an operation to apply (4 choices)
your right-hand number will be whatever is left in the set
Now, you can generalize from the n=2 case:
Pick a number x from S to be the left-hand operand (n choices)
Pick an operation to apply
your right hand number will be F(S-x)
I'll let you take it from here. :)
edit: Mark poses a valid criticism; the above method won't get absolutely everything. To fix that problem, you need to think about it in a slightly different way:
At each step, you first pick an operation (4 choices), and then
partition S into two sets, for the left and right hand operands,
and recursively apply F to both partitions
Finding all partitions of a set into 2 parts isn't trivial itself, though.
Your best clue about how to approach this problem is the fact that your teacher/professor wants you to use recursion. That is, this isn't a math problem - it is a search problem.
Not to give too much away (it is homework after all), but you have to spawn a call to the recursive function using an operator, a number and a list containing the remaining numbers. The recursive function will extract a number from the list and, using the operation passed in, combine it with the number passed in (which is your running total). Take the running total and call yourself again with the remaining items on the list (you'll have to iterate the list within the call but the sequence of calls is depth-first). Do this once for each of the four operators unless Success has been achieved by a previous leg of the search.
I updated this to use a list instead of a stack
When the result of the operation is your target number and your list is empty, then you have successfully found the set of operations (those that traced the path to the successful leaf) - set the Success flag and unwind. Note that the operators aren't on a list nor are they in the call: the function itself always iterates over all four. Your mechanism for "unwinding" the operator sequence from the successful leaf to get the sequence is to return the current operator and number prepended to the value returned by recursive call (only one of which will be successful since you stop at success - that, obviously, is the one to use). If none are successful, then what you return isn't important anyhow.
Update This is much harder when you have to consider expressions like the one that Daniel posted. You have combinatorics on the numbers and the groupings (numbers due to the fact that / and - are order sensitive even without grouping and grouping because it changes precedence). Then, of course, you also have the combinatorics of the operations. It is harder to manage the differences between (4 + 3) * 2 and 4 + (3 * 2) because grouping doesn't recurse like operators or numbers (which you can just iterate over in a breadth-first manner while making your (depth-first) recursive calls).
Here's some Python code to get you started: it just prints all the possible expressions, without worrying too much about redundancy. You'd need to modify it to evaluate expressions and compare to the target number, rather than simply printing them.
The basic idea is: given a set S of numbers, partition S into two subsets left and right in all possible ways (where we don't care about the order or the elements in left and right), such that left and right are both nonempty. Now for each of these partitions, find all ways of combining the elements in left (recursively!), and similarly for right, and combine the two resulting values with all possible operators. The recursion bottoms out when a set has just one element, in which case there's only one value possible.
Even if you don't know Python, the expressions function should be reasonably easy to follow; the splittings function contains some Python oddities, but all it does is to find all the partitions of the list l into left and right pieces.
def splittings(l):
n = len(l)
for i in xrange(2**n):
left = [e for b, e in enumerate(l) if i & 2**b]
right = [e for b, e in enumerate(l) if not i & 2**b]
yield left, right
def expressions(l):
if len(l) == 1:
yield l[0]
else:
for left, right in splittings(l):
if not left or not right:
continue
for el in expressions(left):
for er in expressions(right):
for operator in '+-*/':
yield '(' + el + operator + er + ')'
for x in expressions('1234'):
print x
pusedo code:
Works(list, target)
for n in list
tmp=list.remove(n)
return Works(tmp,target+n) or Works(tmp,target-n) or Works(tmp, n-target) or ...
then you just have to put the base case in. I think I gave away to much.