Im trying to write a string cleaner that removes underscores, but replaces them with dots when between numbers (ie, when there is a version number in the string).
1_1_OS_And_Network_Specific_Config
I would like this string to come out like
1.1 OS And Network Specific Config
I can replace the underscores easy enough, but im having trouble matching the character between the numbers to replace with the dot.
\d_\d
Seems to match the two digits with the underscore .. but if there is three, like 3.4.1 it doesnt.
Can anyone help?
First, replace the underscores between digits:
subject = subject.gsub(/(?<=\d)_(?=\d)/, '.')
(?<=\d) and (?=\d) are lookaround assertions.
They make sure that there is a digit before ((?<=\d)) and after ((?=\d)) the current location, but they don't actually become part of the match.
Then, remove the rest of the underscores:
subject = subject.gsub(/_/, ' ')
Related
I am trying to check if a string contains at least one lowercase letter, uppercase letter, and a number, but not punctuation (including spaces).
For example
4aBc8Fk3 should match
4aBc 8.;3 should not match
I tried the following, but it matches spaces:
^(?=.*[a-z])(?=.*[A-Z])(?=.*[0-9]).{6,}[^[:punct:]]$
Any ideas how to not match strings containing punctuation including spaces?
The regular expression you have got there does the following for as far as I understand (I'm not familiar with the ruby variety, and still quite new to regex myself; this will give you an idea, but may not be 100% correct):
Go to the beginning of the string
Ensure the string matches any number of any characters followed by a lowercase letter, e.g. --a
Ensure the string matches any number of any characters followed by an uppercase letter, e.g.--aA
Ensure the string matches any number of any characters followed by a number, e.g. --aA0
If that is all true, make sure the beginning of the string is followed by at least 6 random characters, e.g.--aA0-
Ensure that is followed by a single non-punctuation character (although this is the part I'm not sure about, as I haven't used character classes before, and don't know if it's [^[:punct:]] or [^:punct:]), e.g. --aA0-c
Ensure that is followed directly by the end of the string
Now, the lookaheads would also allow a different order of occurrences, e.g. 0---Aa, as long as the string contains any characters followed by what they are looking for.
What you probably want is ^[a-zA-Z0-9]{6,}$, i.e. at least six characters, with the characters being letters and numbers (though that would also allow aaaaaa, for example).
Maybe try ^(?=.*[a-z])(?=.*[A-Z])(?=.*[0-9])[a-zA-Z0-9]{6,}$ to make sure each group is present, and to get alpha-numerical characters (at least six of them) only.
I always use a tool such as http://www.regexpal.com/ to slowly build up my regex and to see where I go wrong, deconstructing a "bad" regex until I get to a "good" one, then slowly adding to it again.
Hope that helps. :)
P.S.: I'm still a bit unclear how many characters you want to match in total, i.e. if the string is fixed length or not...?
I have a string like this:
"Jim-Bob's email ###hl###address###endhl### is: jb#example.com"
I want to replace all non-word characters (symbols and whitespace), except the ### delimiters.
I'm currently using:
str.gsub(/[^\w#]+/, 'X')
which yields:
"JimXBobXsXemailX###hl###address###endhl###XisXjb#exampleXcom"
In practice, this is good enough, but it offends me for two reasons:
The # in the email address is not replaced.
The use of [^\w] instead of \W feels sloppy.
How do I replace all non-word characters, unless those characters make up the ###hl### or ###endhl### delimiter strings?
str.gsub(/(###.*?###|\w+)|./) { $1 || "X" }
# => "JimXBobXsXemailX###hl###address###endhl###XisXXjbXexampleXcom"
This approach uses the fact that alternations work like case structure: the first matching one consumes the corresponding string, then no further matching is done on it. Thus, ###.*?### will consume a marker (like ###hl###; nothing else will be matched inside it. We also match any sequence of word characters. If any of those are captured, we can just return them as-is ($1). If not, then we match any other character (i.e. not inside a marker, and not a word character) and replace it with "X".
Regarding your second point, I think you are asking too much; there is no simple way to avoid that.
Regarding the first point, a simple way is to temporarily replace "###" with a character that you will never use (let's say you are using a system without "\r", so that that character is not used; we can use that as a temporal replacement).
"Jim-Bob's email ###hl###address###endhl### is: jb#example.com"
.gsub("###", "\r").gsub(/[^\w\r]/, "X").gsub("\r", "###")
# => "JimXBobXsXemailX###hl###address###endhl###XisXXjbXexampleXcom"
I have a string such as this: "im# -33.870816,151.203654"
I want to extract the two numbers including the hyphen.
I tried this:
mystring = "im# -33.870816,151.203654"
/\D*(\-*\d+\.\d+),(\-*\d+\.\d+)/.match(mystring)
This gives me:
33.870816,151.203654
How do I get the hyphen?
I need to do this in ruby
Edit: I should clarify, the "im# " was just an example, there can be any set of characters before the numbers. the numbers are mostly well formed with the comma. I was having trouble with the hyphen (-)
Edit2: Note that the two nos are lattidue, longitude. That pattern is mostly fixed. However, in theory, the preceding string can be arbitrary. I don't expect it to have nos. or hyphen, but you never know.
How about this?
arr = "im# -33.2222,151.200".split(/[, ]/)[1..-1]
and arr is ["-33.2222", "151.200"], (using the split method).
now
arr[0].to_f is -33.2222 and arr[1].to_f is 151.2
EDIT: stripped "im#" part with [1..-1] as suggested in comments.
EDIT2: also, this work regardless of what the first characters are.
If you want to capture the two numbers with the hyphen you can use this regex:
> str = "im# -33.870816,151.203654"
> str.match(/([\d.,-]+)/).captures
=> ["33.870816,151.203654"]
Edit: now it captures hyphen.
This one captures each number separetely: http://rubular.com/r/NNP2OTEdiL
Note: Using String#scan will match all ocurrences of given pattern, in this case
> str.scan /\b\s?([-\d.]+)/
=> [["-33.870816"], ["151.203654"]] # Good, but flattened version is better
> str.scan(/\b\s?([-\d.]+)/).flatten
=> ["-33.870816", "151.203654"]
I recommend you playing around a little with Rubular. There's also some docs about regegular expressions with Ruby:
http://www.ruby-doc.org/docs/ProgrammingRuby/html/language.html#UJ
http://www.regular-expressions.info/ruby.html
http://www.ruby-doc.org/core-1.9.3/Regexp.html
Your regex doesn't work because the hyphen is caught by \D, so you have to modify it to catch only the right set of characters.
[^0-9-]* would be a good option.
Here's my string:
http://media.example.com.s3.amazonaws.com/videos/1/123ab564we65a16a5w_web.m4v
I want this: 123ab564we65a16a5w
The only variables that will change here are the /1/ and the unique key that I'm trying to pull. Everything else will be exactly the same.
For the /1/ portion, that 1 could be anywhere from 1-3 digits, but will always be numeric.
I'm running Ruby 1.9.2.
Assuming nothing else changes, here's the regex for it:
http://media.example.com.s3.amazonaws.com/videos/\d{1,3}/(.*)_web.m4v
If there are other changes, you need to let us know all the variables.
This is shorter -
s.split(/[/_.]/)[-3]
Since you've indicated that the value you want will always have a "/" immediately before it (and none after it) and an "_" immediately after it, you could use this generic regex:
^.*/(.*)_.*$
Here's why this would work:
^ matches the beginning of the line
.*/ matches any number of characters up to the slash - this is greedy, so it will go until the last slash in the input value
(.*) matches any number of characters and captures the result
_.* matches an underscore and then any number of characters
$ matches the end of the line
By matching anything up to the last "/" and then anything after the "_", you easily isolate the desired value.
NOTE: I don't know if the Ruby regex syntax is any different than this, so your mileage may vary.
--
EDIT: It looks like in Ruby, you might not need/want the ^ or $ at the beginning and end.
How can I write a regex in Ruby 1.9.2 that will determine if a string meets this criteria:
Can only include letters, numbers and the - character
Cannot be an empty string, i.e. cannot have a length of 0
Must contain at least one letter
/\A[a-z0-9-]*[a-z][a-z0-9-]*\z/i
It goes like
beginning of string
some (or zero) letters, digits and/or dashes
a letter
some (or zero) letters, digits and/or dashes
end of string
I suppose these two will help you: /\A[a-z0-9\-]{1,}\z/i and /[a-z]{1,}/i. The first one checks on first two rules and the second one checks for the last condition.
No regex:
str.count("a-zA-Z") > 0 && str.count("^a-zA-Z0-9-") == 0
You can take a look at this tutorial for how to use regular expressions in ruby. With regards to what you need, you can use the following:
^[A-Za-z0-9\-]+$
The ^ will instruct the regex engine to start matching from the very beginning of the string.
The [..] will instruct the regex engine to match any one of the characters they contain.
A-Z mean any upper case letter, a-z means any lower case letter and 0-9 means any number.
The \- will instruct the regex engine to match the -. The \ is used infront of it because the - in regex is a special symbol, so it needs to be escaped
The $ will instruct the regex engine to stop matching at the end of the line.
The + instructs the regex engine to match what is contained between the square brackets one or more time.
You can also use the \i flag to make your search case insensitive, so the regex might become something like this:
^[a-z0-9\-]+/i$