I am using Xcode 4.5.2.I have created a customization tableview programmatically.When i click on a row I need to move to next view.Is there a way to do this?.
Please use the below code to move into another view controller while tapping on table view cell.
#pragma mark - Table view delegate
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
// Navigation logic may go here. Create and push another view controller.
/*
<#DetailViewController#> *detailViewController = [[<#DetailViewController#> alloc] initWithNibName:#"<#Nib name#>" bundle:nil];
// ...
// Pass the selected object to the new view controller.
[self.navigationController pushViewController:detailViewController animated:YES];
*/
}
Related
Here is the story. I have a simple app in which I use 2 tabs, both of them with UITableView. The first tab/view is called "Favorites" and the second one is called "My Profile." In addition I have a custom UITable cell named "CustomViewCell.xib" with an identifier of the same name. FavoritesViewController is a subclass of UITableViewController and that one is running perfectly. But for the ProfileViewController I am using normal ViewController because I don't want the whole view to be UitableView. To make that possible, I the following to ProfileViewController.h:
#interface ProfileViewController : UIViewController <UITableViewDelegate, UITableViewDataSource>
#property (nonatomic, strong) IBOutlet UITableView *tableView;
then in the viewDidLoad of ProfleViewController.m file I have:
[self.tableView registerNib:[UINib nibWithNibName:#"CustomViewCell" bundle:nil]
forCellReuseIdentifier:#"CustomViewCell"];
The following methods are implemented just as in the other tab that's working:
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView
{
// Return the number of sections.
return 1;
}
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
{
// Return the number of rows in the section.
return [self.myArray count];
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
// Here I am customizing the cell and returning it.
}
When i run the app, the cells are the right height, but are empty.
To debug I put a break point right before cellForRowAtIndexPath, and the app runs without an error which it shouldn't. So, the program is not even getting to this method. So, I think that's the reason the cells are empty. Do you guys have any idea what might be causing it to skip this particular method? can you also explain it in simpler terms because I'm newbie, you know?
In you ViewDidLoad method, add this code:
[self.tableView setDelegate:self];
[self.tableView setDataSource:self];
Then check again if the breakpoint works
Have you implemented a UITableViewDataSource? A UITableViewController is the delegate and datasource for the Table View it manages so you can define all those methods in the View Controller itself.
For a UITableView that is a subview of a UIViewController, you need to define the Table View's delegate and datasource.
See here: http://www.aboveground.com/tutorials/adding-a-uitableview-to-a-custom-uiview
Maybe a silly question. But I've added a navigation item in code in my view controller:
//Set add transactions button
UIBarButtonItem *addButton = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemAdd target:self action:#selector(addButtonAction:)];
[self.navigationItem setRightBarButtonItem:addButton];
-(void)addButtonAction
{
}
And I want to segue from this navigation item directly to a new view controller. However I cannot create any segue from the previous view controller to the next one. And since my navigation item is created in code I cannot "pull" a segue from there to a new VC. How can I do that?
Do this
-(void)addButtonAction
{
MyNewViewController *myNewVC = [[MyNewViewController alloc] init];
// do any setup you need for myNewVC
//If you want to present modal
[self presentModalViewController:myNewVC animated:YES];
//If you want to push
[self.navigationController pushViewController:myNewVC animated:YES];
}
Add button to dismiss if presented using modal. In case of push it will have back button
I have a view controller
In storyboard, added tableview to view controller.
Created an IBOutlet for tableview to View controller's header file.
The view controller's header file includes an resultsarray
Changed the #interface to include delegates UITableViewDelegate, UITableViewDataSource
View controller implementation file has mandatory tableview protocols
(NSInteger)numberOfSectionsInTableView:(UITableView *)tableView
(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
The view controller has search button in storyboard and IBAction in view controller header file. On click of search button, results are obtained. How do I load the array and redisplay tableview with results in search method. After I loaded the results in array, I tried [self viewdidload];, hoping the cells will be loaded. But didn't. I thought of calling
[self.detailView cellForRowAtIndexPath:?indexpath], but dontknow what the value of index path is. Appreciate help from guru's to load the UItableviewcell
Thanks
You should use reloadData or reloadSections methods of tableView in order to reload your tableView from data source.
// you fill your array with results here...
// and then call
[tableView reloadData];
This will call cellForRowAtIndexPath: methods for every cell to update its data.
Here is the reference.
I'm starting now with Xcode on 4.2 for iOS5 and there are a few changes and I'm now crossing a problem that I can't figure out a way to solve it.
I'm doing an example with a UITablwView that is populated programmatically with 2 Sections, 1st section with only 1 Row, and 2nd Section with 3 Rows.
My aim is to select a row from the table, and based on that row, the user will be redirected to different Views.
For example:
selecting section 0 row 0, app pushes to view 1 - name setting //
selecting section 1 row 0, app pushes to view 3 - address setting
The old fashion way, this is quite simple, just needed to init a UIViewController with initWithNibName and then push the view.
Now with the storyBoard everything changes, or at least I think it changes because I can't see how to get the same result since I can't set multiple segue's from the tableView to different UIViewControllers...and to do the old fashion way I can't see where I can get the NIB names from the views on the storyBoard to init an UIViewController to push.
Does any one knows how to get to this result??
Define two "generic" segues (identified as "segue1" and "segue2", for example) in the storyboard from your source view controller, one to each destination view controller. These segues won't be associated with any action.
Then, conditionally perform the segues in your UITableViewDelegate:
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
// Conditionally perform segues, here is an example:
if (indexPath.row == 0)
{
[self performSegueWithIdentifier:#"segue1" sender:self];
}
else
{
[self performSegueWithIdentifier:#"segue2" sender:self];
}
}
I have the same problem as you do. The problem is that you can't link your tableViewCell to multiple view controllers. However you can link your source view itself to multiple view controllers.
Control-drag the master view controller (instead of table view cell) from the scene viewer to whatever view controller you want to link. You can do this as much as you want. Notice that the segue shown in source view controller scene should be something like "Push Segue from Root View Controller ..." instead of "Push Segue from NavCell to ...".
Identify each segue link a unique name like "toDetailView1"
Finally, custom the selection in your source view controllers:
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
if (indexPath.row % 2 == 1) {
[self performSegueWithIdentifier:#"toDetailView1" sender:self];
} else {
[self performSegueWithIdentifier:#"toDetailView2" sender:self];
}
}
Like #陳仁乾 and #Marco explained was completely correct. To make everything a little bit easier I would recommend you to use a single NSArray which will be initialized when viewDidLoad. Just name the segues the same as your UIViewControllers, this way you can Display a correct description of what UIViewControllers you can choose from and you can also perform the segues from this NSArray:
(Actually I'm not sure if it can cause any problems calling the segue the same as the UIViewController you want to call. Please let me know if this is BadPractise)
viewDidLoad
- (void)viewDidLoad
{
[super viewDidLoad];
_arraySessions = [[NSArray alloc] initWithObjects:
#"MyViewControllerName", nil];
}
cellForRowAtIndexPath
- (UITableViewCell *)tableView:(UITableView *)tableView
cellForRowAtIndexPath:(NSIndexPath *)indexPath{
UITableViewCell *cell =
[tableView dequeueReusableCellWithIdentifier:#"overviewCell"
forIndexPath:indexPath];
[cell.textLabel setText:_arraySessions[indexPath.row]];
return cell;
}
didSelectRowAtIndexPath
- (void)tableView:(UITableView *)tableView
didSelectRowAtIndexPath:(NSIndexPath *)indexPath{
[self performSegueWithIdentifier:_arraySessions[indexPath.row]
sender:self];
}
I was wondering if there was a way to have the user create/delete cells in a Table View but when they click on it, every cell that they create loads the same view. I have the first part created but I cannot seem to get it to load a view.
Simple create a new view and push on didSelectRowAtIndexPath Delegate method of UITableView.
For ex.
- (void)tableView:(UITableView*)tableView didSelectRowAtIndexPath:(NSIndexPath*)indexPath{
DetailViewController *vController = [[DetailViewController alloc] initWithNibName:#"DetailViewController" bundle:nil];
[self.navigationController pushViewController:vController animated:YES];
[vController release];
}