I want when someone message me on my clickatell number then I want to send this message on my email. I'm using the http request.I have check the http api pdf in which only showing the authentication and send message url . I want the url by whcih I get the message in my script.
I'm using the curl function for request the page.
$curl = curl_init();
// Set some options - we are passing in a useragent too here
curl_setopt_array($curl, array(
CURLOPT_RETURNTRANSFER => 1,
CURLOPT_URL => 'http://api.clickatell.com/http/auth?user=demo&
password=demo&api_id=123432',
CURLOPT_USERAGENT => 'Codular Sample cURL Request',
CURLOPT_POST => 1,
CURLOPT_POSTFIELDS => array(
item1 => 'value',
item2 => 'value2'
)
));
// Send the request & save response to $resp
$resp = curl_exec($curl);
print_r($resp);
// Close request to clear up some resources
curl_close($curl);
It is working and return me the session id and ok status. similarly can I get the incoming message ?
Clickatell has a two-way service which will allow you to receive messages from their service and their implementation documentation can be read here.
In order to receive the notice via email, I would recommend opting for the HTTP callback from Clickatell's servers. This will allow you to write a small script to convert the contents into an email.
Hope that this helps you.
Related
hope you all are doing well. I am stuck with an issue since couple of hours and could not be able to resolve it. Please have a look on error
enter image description here
I am trying to generate refresh token. Access_token generated successfully that is expired after 20 minutes. refresh token could not be generated
$client = new Client();
$res = $client
->request("POST",
"https://test.salesforce.com/services/oauth2/token",[
'body'=> json_encode([
'grant_type'=>'refresh_token',
'client_id'=>Config::get('forrest.info.client_id'),
'client_secret'=>Config::get('forrest.info.client_secret'),
'Authorization'=>'Bearer 00D3H0000008olE!ARYAQOzGGJDDIaygn7GokNk4T319XlDwwBXIDYPkJfej74dfhFT3CMDvBD2pZBQK_x.v2amiRe5Y29ZNXMp9EOA6ZTYyqrTW',
'access_token'=>'00D3H0000008olE!ARYAQOzGGJDDIaygn7GokNk4T319XlDwwBXIDYPkJfej74dfhFT3CMDvBD2pZBQK_x.v2amiRe5Y29ZNXMp9EOA6ZTYyqrTW',
])
]
);
dd ($res->getStatusCode());
any help or comment would be highly appreciated! thank for your time.
It seems like this error is returned from SalesForce API.
Looking at their documentation, it seems that they expect to see application/x-www-form-urlencoded not json.
Try out this code:
$client = new Client();
$response = $client->request('POST', '/post', [
'form_params' => [
'grant_type' => 'refresh_token',
'client_id' => Config::get('forrest.info.client_id'),
'client_secret' => Config::get('forrest.info.client_secret'),
'Authorization' => 'Bearer 00D3H0000008olE!ARYAQOzGGJDDIaygn7GokNk4T319XlDwwBXIDYPkJfej74dfhFT3CMDvBD2pZBQK_x.v2amiRe5Y29ZNXMp9EOA6ZTYyqrTW',
'access_token' => '00D3H0000008olE!ARYAQOzGGJDDIaygn7GokNk4T319XlDwwBXIDYPkJfej74dfhFT3CMDvBD2pZBQK_x.v2amiRe5Y29ZNXMp9EOA6ZTYyqrTW',
],
]);
dd($response);
let me know if it helped.
(Not an answer but too long for a comment)
This looks weird. "Authorization Bearer" should be a http header, not part of the message's body. Are you able to do what you need in plain old Postman, SoapUI etc?
Which OAuth2 flow did you use to generate this access token? Not all flows generate refresh token, for example https://help.salesforce.com/s/articleView?id=sf.remoteaccess_oauth_username_password_flow.htm&type=5 says "this flow doesn't support scopes" so you get full access - but also "this response doesn’t send a refresh token."
Have you checked the connected app (place in SF where you took client id and secret from), do the OAuth2 scopes include refresh? Did you ask for refresh token (included it in the original request's grants)?
I have a laravel application setup and I'm configuring a Discord auth system.
I have sent & requested authorization & recieved a confirmation code back.
When I try to exchange the code for an access token I'm receiving a 400 bad request and I'm not sure why.
I'm new to laravel and can't seem to find any sort of error that may help to pin point the problem.
Controller function that discord redirects after authorization
public function exchange(Request $request) {
//exchange discord code for access_token
$code = Request::get('code',false);
$params = array(
'grant_type' => 'authorization_code',
'client_id' => env('CLIENT_ID'),
'client_secret' => env('OAUTH2_CLIENT_SECRET'),
'redirect_uri' => Request::root().'/discord/return',
'scope' => 'identify guilds guilds.join',
'code' => $code
);
$access_token = Http::withOptions([
'debug' => true,
'headers' => [
'Accept' => 'application/json',
'Content-Type' => 'application/x-www-form-urlencoded'
],
'json' => $params
])->post('https://discordapp.com/api/oauth2/token');
dd($access_token);
return redirect()->route('return.discord',['token' => $access_token->access_token]);
}
I've dumped out $params and all the data is pulling in as it should.
Guzzle dumps this:
[CONNECT] [FAILURE] severity: "2" message: "HTTP/1.1 400 Bad Request " message_code: "400" [MIME_TYPE_IS] message: "application/json" [FILE_SIZE_IS] message: "Content-Length: 26" bytes_max: "26" [PROGRESS] bytes_max: "26"
I know that 400 bad request means an issue with the data being sent along, but I can't figure out what I'm doing that's not producing the correct result. The documentation states the required content type which I have set, so I'm really scratching my head here.
Any help would be much appreciated.
Here's the Discord API documentation:
https://discord.com/developers/docs/topics/oauth2#authorization-code-grant
To anyone looking for an answer...
The "invalid grant" error is due to an issue with the Discord API and non-standard requests. I could not get the Laravel HTTP class request to work for exchanging the access token. Instead, I used native php cURL within Laravel.
As for the issue with receiving '400 bad request', that was due to using incorrect function withOptions() as oppossed to asJson()->withHeaders(). Thanks #Zachary Craig!
However, I could not use this in the end due to the problem described above.
If any others find a better solution, let me know :)!
For all who have the same problem.
The solution is to use ->asForm() before the post. This changes the handling of the data from json to form_params. This way the Discord API accepts the parameters.
return Http::asForm()->post($this->endpoint.'/oauth2/token', $data);
I have a laravel application that I'm creating. The web routes calls the API for information. When I test my API it returns data, but when the front end dev calls the API it slows the system and returns a failure. This is a simple GET that was working before but is not working now.
This is the the API call from the web:
$url = 'http://localHost:8000/api/v1.0/theater_movies';
$opts = array('http'=>array('http' => array(
'protocol_version' => 1.1,
'user_agent' => 'PHPExample',
'method' => 'GET',
'header' => "Content-type: application/json\r\n")
));
//Basically adding headers to the request
$context = stream_context_create($opts);
$getMovies = json_decode(file_get_contents($url,false,$context), true);
I'm getting the file_get_contents error:
file_get_contents(http://localhost:8000/api/v1.0/theater_movies): failed to open stream: HTTP request failed!
And this is the correct output from Postman
I am trying to access an API using Guzzle in Laravel 5.5.
The command in curl looks like:
curl http://apiurl.com/getRequest -d "api_key=token_value"
Now using Guzzle, I started to code as below:
$client = new Client(['base_uri' => 'http://apiurl.com/']);
$response = $client->request('GET', 'getRequest', [
'headers' => [
'api_key' => ['token_value']
]
]);
var_dump($response->getStatusCode());
var_dump(json_decode($response->getBody(), true));
Now I am able to see statusCode as 200 and getBody as Null. But when I use the same request using curl then I am able to see the complete data.
Could someone resolve it please?
When comparing differences between curl and Guzzle, I highly recommend using -v (curl) and the debug request option (Guzzle). The verbose output allows for visual comparison of the requests that each software is transmitting.
The curl man page indicates that -d and --data send POST requests.
(HTTP) Sends the specified data in a POST request to the HTTP server,
in the same way that a browser does when a user has filled in an HTML
form and presses the submit button. This will cause curl to pass the
data to the server using the content-type
application/x-www-form-urlencoded.
A pair of changes are required in order to send the desired request with Guzzle:
$response = $client->request('POST', $uri, [
'form_params' => [
'api_key' => $key_value,
],
]);
The first change is the type of request that is being sent (GET => POST). The second, is the usage of form_params. The form_params request option is used to send application/x-www-form-urlencoded POST requests.
I need to parse the content resulting from a XMLHttpRequest, not from the browser but using PHP/or PERL or whatever, BUT javascript.So I tried to make a POST based on my understanding of the specific request I need to parse but I get in return a 404 (page not found).
Where is my mistake?
1) Incorrect post message
2) The server understands that my request is not coming from XMLHttprequest and then rejects with a 404.
3) Other I do not know.
Sorry, I cannot post the URL because it is inside the Intranet.
I will post the code written in perl:
use CGI;
use LWP::UserAgent;
my $ua = new LWP::UserAgent;
my $response
= $ua->post( $myUrl,
{ bId => '5',
'c0id' => '0',
'c0mN' => 'cM',
'c0p0' => 'string3.57',
'c0p1' => 'boolean:false',
'c0sN' => 'mD',
'cC' => '1',
'httpSessionId' => '0C23946319623A',
'page' => $relPage,
'scriptSessionId' => '67233543259'
})
You don't have to do anything special with those other methods; just set the request type in the open() call, and send() an appropriate body (the item you're putting in the case of "PUT"; a null argument in the case of "GET").
Do you have a timeout mechanism and event scheduling in place?