I'm new to ApplescriptObjC as you'll probably see if you keep reading. I was wondering how to get constant feedback from a slider so that as soon as its value is 1 it runs script A and as soon as its value is changed to 0, it runs script B.
I know you can have actions for buttons like:
on buttonClicked_(sender)
do action
end buttonClicked_
But how can I have a one that constantly checks for a change in the slider's value and does the appropriate action? Is it similar to connecting a slider to a text box with the getStringValueFrom() thing?
Any help would be appreciated. Thanks :)
Found out how!
turns out on action_(sender) will work for sliders as well. They send the signal every time the item is clicked on and released whether a change exists or not. Then its a simple matter of an if statement to run two different series of actions depending on the value the slider was set to.
Related
I'm trying to create a program that creates three buttons on the right side of the screen.
When I press a button, the entire background will change color (each button will make the background a different color). Whenever the mouse is not pressed, the background will return to white. I'm having trouble understanding how to make the three rectangles into buttons.
THIS MUST BE DONE WITHOUT A SPECIAL BUTTON METHOD/LIBRARY
You need to break your problem down into smaller pieces.
Can you create a program that just shows a single button? Don't even worry about making it interactive yet. Just show a single button at hard-coded coordinates.
Now can you detect when the user clicks in that button? Just print something to the console. Get that working perfectly before moving on.
Now can you get multiple buttons working together? Again, just print somethign to the console, and make sure it works perfectly before moving on.
Finally, can you make it so pressing each button changes the background instead of printing something to the console?
If you get stuck on a specific step, you can post a MCVE along with a specific technical question. Stack Overflow really isn't designed for general "how do I do this" type questions. It's for specific "I tried X, expected Y, but got Z instead" type questions. So please try something and post an MCVE of a specific step you're stuck on. Good luck.
Check processing's documentation for mouseClicked() and mousePressed.
The former being a method called upon a click, and the later is a boolean that is constantly updated. (So you'd check for it in your draw())
You'd then want to check the mouseX and mouseY values to see if they are in your desired button's area. (Which would be displayed on screen using rect())
I implemented Gauss Jordan Algorithm in eclipse and now I am trying to make it be a software, however I have no experience at all with GUI.
I have a window that asks for input of 2 things number of variables and number of equations and when user enters the numbers and presses submit button, second window opens.
In that second window I need certain number of textfields to appear itself, which will be dependent on the two variables mentioned above.
My question is there any way to grab the value from first class(first window where user entered variables which I stores in first class) pass it to second one(second window where the textfields will appear) to tell it how many rows and columns should be generated with textfields and then the program would generate it?
I tried looking up on youtube, because I do not understand documentations well, so any answer would be very appreciated!
Well the MVC pattern could help you to do this, check something like this:
http://www.austintek.com/mvc/
I have recently been asked if I could make a macro in Excel VBA that will allow a user to type in two numbers and have it automatically drop to the next row. The purpose of this is so they can type in grades for a test two numbers at a time without pressing enter since they aren't great at typing.
When I first heard this he mentioned it was Visual Basic, so I figured I'd just use a TextChanging or TextChanged event in the cell range and have it work off that. However, I haven't been able to find any such event or anything resembling it in the documentation thus far. The first thing that I came across was Workbook_Change, but that only changes after you press enter which is useless to me. Someone else mentioned there is such an event, but couldn't name it directly and I haven't been able to find what they were talking about.
If anyone has any information on if such an event exists or is possible I'd love to know.
The Excel version is 2007 as far as I'm aware.
This, in my opinion, requires a non-programming solution. I absolutely sympathize - it is tough to watch people get old - but you have to draw the line somewhere - for their sake and yours. The enter key is the most basic part of a computer. You could probably write a macro that would automatically hit enter on every even(or odd depending) keystroke in excel - but you're going to run into other problems like not being able to use delete normally. And what if you do want to put a string of text in a cell(like the student's name)? Perhaps it is time to find a non-programming solution. By that I mean someone should have a candid conversation with him about how he wants to solve the problem. Personally, I would offer to type the numbers in for him, as I am accustomed to the number pad - but it is probably better to be more direct and start to discuss retirement.
See this discussion about the limitations of cell edit mode in excel:
http://www.mrexcel.com/forum/excel-questions/524860-call-macro-every-keystroke.html
If you're really heart-set on a programming solution, I would recommend some kind of keystroke logging add-in.
Good Luck.
You could use the Worksheet_SelectionChange event. It is triggered without enter, but it would be triggered a lot.
You could however also create a special user-form for typing in the data, but this might be more work than necessary.
The main problem with using my suggested event is, you will need it as trigger and trigger it yourself, when selecting the next row, so disable event handling before changing the selection.
Edit:
This is a quick solution (paste this into the vba-code of the desired worksheet):
Private Const clngColumnRightToLastGrade = 5
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column = clngColumnRightToLastGrade Then
Application.EnableEvents = False
'offset selection, one row down, two cols to left
Target.Offset(1, -2).Select
Application.EnableEvents = True
End If
End Sub
This will set you one row down and to column C, everytime your selection changes to column E (=5).
You don't have to use a constant of course, you could specify the column to sense in the workbook, so your user might modify it easier by himself.
To make this as an optional feature, you could extend it to autogenerated code. What I have in mind is like a Ribbon-Button, which opens a setupForm to configure, and a Ribbon-Button to activate the configuration, which would place this code in the configured sheet. But this might be a bit over the top.
In Excel 2003, (may be different in Excel2007 ?!) the WorkSheet_Change event is triggered every time the value of a cell is changed wether it is by pressing enter, delete, selecting an other cell after modifying a cell or even when a vba script changes the value of a cell.
I would do something like that:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim RefRange As Range
Set RefRange = Intersect(ActiveSheet.Columns("??????????"), ActiveSheet.UsedRange)
If Not Intersect(Target, RefRange) Is Nothing Then
Target.Offset(0, 1).EntireColumn.Range("A1").Select
'Target.Offset(0, 1).EntireColumn.Range("A65536").End(xlUp).Offset(1,0).Select
End If
End Sub
It's a longshot that anyone can help with this, but here goes. I inherited a VB6 app with a Janus GridEX control. It iterates through records, and is editable. Problem is, if I edit a cell and hit the button to go to the next record, the change is applied to the next record, not the one I was editing. It's like, I need it to finish up the edit before going to the next record. I've had this sort of problem before in VC++, and sometimes you have to "KillFocus" on the control you're on or something. I just don't know what to do here. I tried sending a carriage return, since if you return out of the edit cell, it works, but sending a carriage return manually doesn't work. What's the secret?
Is your grid bound or unbound?
It's hard to tell from your description, but I imagine that if your are having this problem then it's probably bound.
As the other answer asked, is the button the RecordNavigator that is built into the control or is it a separate button? The reason I bring this up again, is that I have seen issues in the VB6 applications I support where a toolbar will often intercept and interfere with how the JanusGrid should work.
To get around this limitation, I have added the following code in the click handler of any toolbars where there is also a JanusGrid control on the form.
If jsgxYourGridName.EditMode = jgexEditModeOn Then jsgxYourGridName.Update
This way any changes are immediately applied to the current row.
If this does not help, then I have also seen problems where the recordset that is bound to the grid gets out of sync with the internal recordset in the grid. You can check this by comparing the bookmark of the grid to the bookmark of the recordset.
Ie. mrsYourRecordset.Bookmark = jsgxYourGrid.ADORecordset.Bookmark
At one point I may have also used something like this.
jsgxYourGrid.ADORecordset.Bookmark = jsgxYourGrid.RowBookmark(jsgxYourGrid.RowIndex(jsgxYourGrid.Row))
Finally you can try setting a breakpoint in the BeforeUpdate, RowColChange and/or AfterColUpdate events of the grid, to see what record the grid is really on when clicking on the button.
It depends whether the button is internal to Janus GridEX or not. If it internal then just about the only thing you can do is look at the events the control exposes to see if there a sequence that can let you know that this problem occurs. Then you can try to take corrective action by restoring the row you moved to and put the edit in the row you left.
If the button is external to Janus then you can use the debug mode to trace sequence of statement that control the transfer of focus to the next row. It could be something out of order or a side effect of the particular sequence of commands. I have run into both with different controls.
Remember that you can edit while in debug mode so you can try different approaches and test until you find one that works.
I really enjoy using RBSplitView, an open source replacement for NSSplitView, but I have a problem in my shipping app and am experiencing it again in a new project.
The problem is I'm telling the RBSplitView to autosave its position state by giving it an autosave name. When my app launches the RBSplitView doesn't seem to honor the saved state till a second after the window is drawn.
I've spent the night trying to debug the behavior but have had little success. Anyone out there use this lib and have some advice?
You can scrub this quicktime movie to the issue at work:
http://media.clickablebliss.com/billable/interface_experiments/rbsplitview_delayed_autosave_reload2.mov
I've still been unable to figure out why this is happening but I do have a workaround.
First, make sure your main window is not visible at launch and then at the end of applicationDidFinishLaunching in your app delegate add something like:
[mainWindow performSelector:#selector(makeKeyAndOrderFront:) withObject:self afterDelay: 0.1];
The delay is the key. If you just tell the window to makeKeyAndOrderFront: I still see the issue. However as long as it has a beat of time it looks good.
This likely is happening because the RBSplitView instance needs to wait until it's first moment to get to set its frame to the autosaved value, which happens to be after the user can see it. This 0.0-delay trick simply delays showing the window until the very next runloop, which gives the split view a chance to do its magic (and other views) so that when the user sees the window, it's already nice and sexy. So just do the delay at 0.0 and you'll be fine.
I have a similar, but slightly different workaround in my app that uses RBSplitView. In applicationDidFinishLaunching:, I call adjustSubviews on the split view before calling makeKeyAndOrderFront: on the window that contains it. This seems to knock the split view in to order before it gets displayed on the screen.