I have erroneously added a file to a project in Xcode and I have pushed it to the server.
Now I want to remove it.
Does removing the file from the local project will results in removing it from the remote repository too at the first commit?
Removing the file from the Xcode project isn't going to remove the file from the repository. You have to use the Organizer if you want to remove the file from the repository in Xcode.
Open the Organizer and click the Repositories button at the top of the Organizer. Select the repository's Trunk folder from the repository list on the left side of the Organizer. Select the file you want to delete. Click the Delete button at the bottom of the Organizer to remove the file from the repository.
Subversion is like one of those Roach Motels: Files check in, but they never check out.
Once you add a file to Subversion, it's there forever. You can remove it from the current revision of the repository (via the svn rm command), but you can never remove it completely. Someone will always be able to see it in a log, and someone can access it by checking out the revision of that directory right before you removed the file.
There has been a lot of debate about this feature. Most version control systems have an obliterate command of some sort that allows you to remove a version of a file or completely remove the file from the repository. The problem is that Subversion doesn't revision files -- it revisions the entire repository.
I don't know Xcode, so I can't help you with the exact steps. However, there must be a Repository view in Xcode like there is in Eclipse or a series of subcommands that deal with the repository (much like Eclipse's Team commands). You should be able to delete the file from there, then commit your change.
That will remove the file from the latest version of the code (and future versions). However, it will still be there in the repository, so someone can find it via the history log, and then checkout the version of the repository right before you deleted the file. If this file contains your Swiss bank account number, you're in trouble.
NOTE: There is a way to remove a file completely from Subversion, but you have to shutdown the repository, dump it out, filter out the file, then load the repository dump into a new repository. It is usually not worth the effort.
You can do it from command line using svn rm filename
http://svnbook.red-bean.com/en/1.6/svn.ref.svn.c.delete.html
Deleting a file from Xcode WILL delete it from your remote repo when you commit (tested with svn).
Using Xcode 4.6.3 I deleted a file from my project. Committed, and it was in turn deleted from my remote repository. When you delete from Xcode, you must select "move to trash" when prompted what to do. If you select "delete reference" then that file will remain in your remote repository, just as it remains part of your projects files but just not referenced in the actual Xcode project.
When you commit your files, count the files that have checkmarks on them, and look at the count that Xcode reports in the bottom right corner, Xcode reports one extra file! Thats the deleted file, which means its committing that change.
Once again, before committing, go to terminal and 'cd' to the directory where you had the file that you deleted. Enter this:
svn info ./yourFilesName.txt
You will see a result that says:
Schedule: delete
which means that when you do a commit, the file will be deleted from your remote repo.
When you delete from Xcode, you must select "move to trash",and then commit the ".xcodeproj" file
Related
I have an Xcode project one local and one remote repository. Firstly, there was a problem in current version and I decided to change local repository's head using terminal. Xcode fetched everything and I continued working on the project. When I decided to commit changes, Xcode gave me an error like this: "error: src refspec (detached from ) does not match any.error: failed to push some refs to [repository address]". After, I decided to create a new remote repository and try to make initial commit of this project. I added remote to Xcode and now it crashes even if I open "remotes" tab. I use bitbucket as my remote repo.
Question: is it possible to fix this, or it is easier to copy all the contents of the project to another one and commit new one? Thanks for replies.
I had the same problem: the local git repo was created from command line (from terminal app) and not from within Xcode, Xcode would crash every time even when clicking on the remote tab. I have a different solution that may be easier:
1)Commit and Push all changes with your current project from your local Xcode-non-compatible repo
2) Re-open Xcode (close it if it's open) and select "Check out an existing project" from Xcode
*If you don't see this Xcode startup screen, go to Source Control->Check Out...
3)Select the remote repo then
4)Select a NEW directory for the checkout destination
Now you will have a project set up and compatible with Xcode!
Solved:
Create new empty project, then copy all the files from previous one. Create new repository, absolutely clean. Push there.
It seems that Xcode had a conflict when local repository's head was changed using command line and git. So, this is as warning for users who got the same situation.
I'm not sure what happen but when I try to commit my changes in Xcode I get an
fatal: Could not switch to '/Users/charlesbutler/xCode/MA Mobile/MA MobileTests': No such file or directory
I have a bunch of files like this.
Is there anything I can do to remove them from being committed. A lot of them were deleted (probably manually in the project folder by me)
This just happened to me. I had deleted a folder with contents from the project folder. Xcode didn't handle that well.
What worked to fix it was to recreate an empty folder with the same name. No need to recreate its contents.
In your case I think you just need to create a new empty "MA Mobile" folder in the same location the old one was. Then commit. It worked for me.
After the first commit I deleted the new folder, then committed again. It seems that Xcode is missing the logic to handle the deletion of a whole folder with contents.
If you'd like to simply commit all changes you made, doing so through the Terminal should fix the problem.
Open the Terminal App and cd into your project directory, once there type in the following command:
git commit -a
Enter your commit message by pressing 'i' and typing it in, then press 'Esc', then ':', and type 'wq'
All done, you're problem should be fixed.
Jader Feijo's answer solve my problem.
Just want to suggest an easier way to add comment, without all this additional Vi steps, by simply adding -m parameter:
git commit -a -m "Commit Message"
Assuming that you are using GIT - run the following in your command line;
cd "/Users/charlesbutler/xCode/MA Mobile"
git rm -r "MA MobileTests"
I had this problem after adding and then deleting sub-projects in a project that was under source control.
I fixed it by using the GitX application, selecting the Commit View, un-staging the now non existent files from the Staged Changes list, and then selecting Discard Changes for the same files in the Unstaged Changes list.
I then had to delete the repository from the Xcode Organiser-Repositories screen and restart Xcode before things were working ok again. Xcode automatically re-adds the repository back in when the project is re-opened.
Perhaps someone with GIT expertise can provide a command line alternative that performs a "Discard all changes that are no longer present on disk" action
I've had this problem because somehow a folder of the project was added to .gitignore, I removed it from there and committed the missing files. Xcode did not show me that the folder was in gitignore or that he was different from the other folders in any way.
I'm running Xcode 4.1 at work and home. I've successfully checked out a project from a remote svn repository (work) on my home setup. The repos was updated, so when I got home, I did an update on the local checkout.
The status of the updated files got flagged "U" (good) and a page appeared showing changes to accept, but when I hit accept, I get a popup that says:
The working copy "ABRA-D" failed to pull. fatal: Not a git repository
(or any of the parent directories): .git
Well, yes... the repo is svn, not git! Closing Xcode and restarting removes the "U" tags and I'm back where I started. Sounds like Xcode is confused about the repo type, though it knew enough to query the svn repo and find out what had been updated. Anyone know a cure?
That issue, already mentioned in "Error : Fatal: Not a git repository (or any of the parent directories): .git", has a somewhat curious solution described here:
Recently I created a new project and at some point I uploaded it to SVN. I am not quite sure how to reproduce this situation but somehow the versioning support of Xcode 4 decided to interpret the project as a git repository.
Each time I tried to copy a file per drag and drop into my project I got following error:
fatal: Not a git repository (or any of the parent directories): .git
The result was that the file got copied into the project folder, but the reference didn't get set in the project. I had to go into the folder and drag and drop the file again and uncheck the copy option this time, so that the reference gets set.
The Solution
Open Xcode and go to Window > Organizer
Find under repositories your project. It might be two entries if you use something like SVN.
Make sure it says "Type Git"
Mark the repository entry and hit backspace or delete (on mac)
Done
In my case, when i created my project it was using git. But later i removed all git files from my SVN repository. Then took an update.
Now, when i tried to add files, it gives me same error.
Solution: I removed all repositories against my project in XCode Organizer. Now when i added new files, it works fine.
I had a git and svn against the same project and tried removing the git and got this error
In the end went and manually edited xcshareddata found at and removed all the entries which had anything to do with the git repositoy.
myproject.xcodeproj/project.xcworkspace/xcshareddata
When I set up a new project in Xcode 4, and select "Create local git repository for this project," all seems well enough. I'm able to commit files from the Organizer (it would appear.) However, in the Project Manager, the "Source Control" menu options (commit, etc.) are all grayed out, except for "Repositories" which of course just takes me to the organizer.
Furthermore, in the Project Manager window, I don't see any icons by file names indicating if they're changed, committed etc. like I see in the screenshots in the Xcode 4 documentation.
I've tried this with both a project that's connected to Github, and one that's just using a local repository, and I've still yet to see those options not be grayed out. Any suggestions?
I discovered the cause of this problem is that I was saving projects in /Developer.
Turns out, that's a big no-no. Not only does it break git integration in the way described in the original question, as well as breaking other features such as Xcode 4's refactoring functionality, it also runs the risk of deleting all of your work when you install an update. Once I started saving projects outside of /Developer, all the git functions in Xcode 4 started working as expected.
Bottom line: Don't keep projects in /Developer.
This can be a bit confusing. Apples documentation here:
http://developer.apple.com/library/mac/#documentation/ToolsLanguages/Conceptual/Xcode4UserGuide/SCM/SCM.html
Has a great way to activate the source control via the command line:
To set up a Git repository from the command line . . .
Use the cd command to switch to your project folder, making it the current working directory.
Enter git init to create an empty repository.
Enter git add . to copy your project files into the repository.
Enter git commit -m "Initial commit." to commit all the files.
I am not able to see the commit option after I make changes to my working copy, but I ensured that my settings for svn were correct.
What exactly is the problem with this error message?
Xcode is showing:
Your path is not a working copy
What should I do to resolve this?
The blog post "Xcode, Subversion Error: 155007 (Path is not a working copy directory)" and its comment are pretty much the reference on this kind of error.
Simple Workaround:
Delete your local copy (cd myxcodeproject; rm -rf .)
Delete the “build” folder from the server
svn co https://svnserver/path/trunk/project .
Now you should see .svn folders in every directory of your local project (you don’t see them if you use the “Export” function of the SCM panel from Xcode).
At this point, you should be able to edit and commit your changes directly from Xcode.
Now you need to initialize correctly the project.
The following sections illustrate that part:
How to do it right (general principle)
To place the project under Xcode, you need to first import it.
The SCM->commit entire project… gives error 155007 if you don’t first do this:
Under the SCM menu in Xcode select Repositories, then click the IMPORT icon at the top of that dialog that appears.
Select the project from the list and then click the import button.
Of course you need to first configure at least one repository before doing the steps above.
Right Initialization steps (detailed process)
Create the project in XCODE.
Setup subversion in XCODE and select the subversion repository for this project.
Use Xcode SCM > Repository and click on the IMPORT icon. This will move the local copy to the subversion repository.
Now delete your local copy (or move it to another location just in case).
Finally CHECKOUT the project from subversion (this will create the subversion .svn folders, …).
Reselect the subversion repository for this project.
Commit the entire project.