I'm trying to Turn on IIS Server on my 64-bit Windows 7 Ultimate installed notebook. But when I try to it on via *Turn Windows Features on and off * the progress bar is filling till the end and the computer is just locked. I can not do anything but restatring the computer with power button. And of course it is not enabled. Am I missing something ?
http://www.iis.net/learn/troubleshoot/installation-issues/troubleshooting-iis-7x-installation-issues
Please do some troubleshooting following Microsoft's article. I think CBS cache on this machine is broken, and the article shows how to identify the problem and get it fixed.
Related
Bear with me please, since I don't know that much about Windows – I'm trying to set up UWF (Unified Writing Filter) here on my mac through a Parallels installation of Windows 10. I found out how to enable UWF through the Control Pane, which I did. I then restarted the Virtual Machine. When I then tried to configure it through the powershell or command prompt (both run in admin mode), I got no response whatsoever. The uwfmgr.exe is there under c:\windows\system32, but like I said, it doesn't do anything when I run it. No response – but also, no error.
Can anyone help me with this?
I had the same issue and solved it by downloading the latest ISO for 10 Enterprise.
It seems you need a Windows 10 Enterprise edition for this to work. Just re-activating windows with an Enterprise key makes uwfmgr.exe print stuff again. Just testing, whether it works as well.
This was tested on Windows 10, V1809.
Exact error:
Severity Code Description Project File Line Suppression State
Error DEP0001 : Unexpected Error: -1988945906 TestApp
What does it mean? It seems it isn't problem with application, it works OK on PC.
Version of OS: 1511, Windows 10 for phones 10.0.10586.164
I've experienced the same problem after updating Visual Studio community to Update 2. Typing in CMD (under admin rights) the following command solved my issue:
net start IpOverUsbSvc
Thanks to Agrgg for a good tip ;)
This kind of error happens very randomly and usually it means there was an issue during the deployment of the app. Things to check:
Developer mode is correctly enabled on phone
Uninstall the app from phone, rebuild solution and then try debug again
Check that the architecture for all projects is set accordingly (ARM for debugging on real device)
Sometimes the VS debugger hangs up, so closing VS and kill from Task Manager all VS processes that are eventually running and restart VS may also help.
I had the same error with deploying onto Windows Phone 8.1 device. In my case the problem was in Windows Phone IP over USB Transport (IpOverUsbSvc) service, which wasn't running. The deployment error disappeared after I'd started the service manually.
I had the same problem.
"net start IpOverUsbSvc" didn't worked for me (throws Access is denied Exception).
I have followed following steps to fix.
Start Run (Windows+R), Type: services.msc
Start/Restart Windows phone IP over USB Transport.
For the RPi, I have RPi3 with WIOT (build 14376) this error happens after failed deployment. Just restart VS and it'll deploy ok.
After trying some of the answers already provided and nothing worked, I fixed the error by simply restarting the phone.
After that the error was gone for me.
I had the same issue, and found that in my case it was occurring while the phone was downloading system updates in the background.
App updates/installations from the app Store were also prevented from downloading/installing.
After the update had finished, all was back to working again.
As Windows Phone 10 doesn't seem to make it obvious that it's downloading updates, maybe worth checking this out if you hit this problem.
I had the same error, solution is here: https://msdn.microsoft.com/ru-ru/library/windows/apps/jj863509(v=vs.105).aspx
Look at Checking BIOS settings required by Hyper-V for Data Execution Prevention. You must select "Turn on DEP for all programs and services except those i select" and in my case application deploys successfully.
For me, it was as simple as unlocking the phone so that the computer would have access to it.
I had this issue as well. None of the answers helped me. IpOverUsbSvc was up and runing, phone reset, system reboot, nothing...
The issue was fixed after a Visual Studio "repair": control panel -> Programs and features -> select VS2015 -> Repair
I got a similar error.
The reason the error occurred for me was because I forgot to add the new splash images in assets after deleting the old ones.
The solution was to add the images. To get the correct image names and sizes, I used this extension for visual studio.
For Windows 10 (desktop) users
I faced this problem after I uninstalled Windows 10 SDK. It deleted the IpOverUsbSvc service from the system.
Solution
Download the Windows 10 SDK .iso installer
Inside it there is Installers folder.
Find Windows IP Over USB-x86_en-us.msi. Install it. (Don't worry if there is no setup window, it installs fast and silently).
I didn't even have to reboot VS2015, it just worked.
Check if the IpOverUsbSvc service is running
Open a Powershell prompt and type Get-Service -Name *USB*
Or go to the Services window. There you should see the IpOverUsbSvc running.
So, I think I get the trick. After plugged in your Windows Mobile device, Windows App Deploy can see W10M device, but once your device goes to lock screen, WPD can not detect it anymore.
You should to plug out and plugin again, with screen unlocked, to make it detectable. (I'm not a really English speaker).
I am having really difficult time to cope up with the windows phone emulator.
My ultimate goal is to deploy my application and sniff http requests through fiddler.
I am on Visual Studio 2013 Update 4 on Windows 8.1
Problems which i face
Sometimes the emulator does not start at all and gets stuck "Window Phone OS is starting ".
Here first i get the message of "Attempting to modify switch settings" info dialog. I clicked on ok. Then i get Error dialog of "Windows Phone emulator is unable to connect to the windows phone operating system" "Object reference not set to an instance of an object "(Internal c# error). I click close and it gets stuck at "Windows Phone OS is starting".
if i get past this problem and my application gets deployed. I cannot connect to internet. Even a link in browser does not open.
Now for the rarest of rare times i am able to connect to internet. I am in no way able to sniff http request.
But sniffing is still my secondary problem, but my first issue is to get the emulator run and connect to internet.
Steps which i have performed to troubleshoot.
Hyper-V as a Windows feature is turned on.
My firewalls have been disabled.
I have removed the virtual machines and switch created by Hyper-V manager and let it be created through Visual Studio.
In network connections, disabled and enabled the vEthernet (Windows Phone emulator switch ).
Have also tried ipconfig/renew.
Have gone through lot of msdn posts, blogs, so questions but the behaviour of emulator is pretty inconsistent.
Is there any way i can get emulator logs/info ?
Any help to direct to me to any direction will be hugely appreciated.
UPDATE
only thing which is consistently working for me right now is disabling Hyper-V windows feature and then enabling it again.
Mind the expensive system restarts also. Then adding my user name to Hyper V admin group and then deploying the application.
So whenever i am changing my network i have to perform these steps. Definitely not sustainable
UPDATE 1
So now i have fiddler also acting as a man in the middle. Followed the steps here http://blogs.msdn.com/b/wsdevsol/archive/2013/06/05/configure-the-windows-phone-8-emulator-to-work-with-fiddler.aspx. Couple of thing to change here are the port number and to give the ip number instead of host name.
Also have fiddler always start first and then the emulator. Fiddler is able to sniff the requests happening in emulator. But my application http requests are not going through which is fine if i run without fiddler. I am currently looking into this.
Best Regards,
Saurav
Have you tried to run Visual Studio as Administrator? Sometimes, the user must have highest privileges to run Hyper-V.
Recently i installed Microsoft Visual Studio 2013 Preview Ultimate on Windows 7. Everything went smoothly except now i can't access www.microsoft.com and www.skype.com anymore. Tried latest IE10 and FireFox, both show blank page when accessing the above mentioned web sites. Firefox in its left bottom corner shows that it is waiting for ajax.aspnetcdn.com.
I'd really like not to reinstall OS on my machine, so i'd appreciate any idea how to fix this. For myself i tried to stop Firewall service and disable MS Security Essentials runtime protection, neither helped.
PS: I can access www.microsoft.com and www.skype.com from another machine in the same local network
UPDATE: i am using tfs.visulstudio.com as my TFS server and it opens fine if i am not signed in. But once i am trying to log in it opens blank, like browser is waiting for something (the same as for microsoft.com and skype.com). Something related to live ID?
Don't think this is the website to post this kind of question but try uninstalling VS2013 preview because you think that's causing the problem. Search in Google for people getting similar problem. I also don't think it is VS2013 because I can't think of anyway of how VS2013 would somehow disable you from going to a certain website. Make sure the sites weren't down at the time or if you're having something kind of Internet server issues.
skype is owned by microsoft, so you can't enter both microsoft pages. This could be related with some kind of ISP (Internet Service Provider) and not with VS2013, or you can try rebooting your router. Last thing i would do is traceroute both address and see where they fall.
I wanted to write this as a comment but I don't have enough reputation yet. Anyway, obviously trying to uninstall the program and trying again would be a good start as already mentioned, but you should also look inside your hosts file for any weird redirections some virus of malware might have set up. It's located at "C:\Windows\System32\drivers\etc" and you can open this inside notepad (might require notepad to be run as an administrator). Check to see if skype.com or microsoft.com are in there and are pointing to a different IP address. If they are you can just remove them and save the file (might require a restart to take effect). If still no luck you should try a livecd of a linux distro to make sure the problem is definitely inside your windows somewhere.
Let us know how it goes.
In Visual Basic 6, when I attempt to access Project > References, it throws an error:
Error accessing system registry
I am:
Logged in as the local computer administrator
running Windows XP Professional and
I can execute regedt32.exe and access all the registry keys just fine.
VB6 was installed as the local administrator.
Any idea why this happens?
I'm running crystal reports 8.5 and it supposed to already have fixed that issue but apparently I still have the issue with 8.5 installed. I have also made the attempt of reinstalling crystal reports with no luck on the issue.
Depending on the Windows OS you have (I have Windows 7 Enterprise), you might want to try giving administrator rights to the REGTLIB.EXE (located in C:\Windws). Right click on the REGTLIB.EXE file. Select Properties from the pop-up menu. Then select the Compatiblity tab. On the Compatiblity tab, check/select the Run this program as Administrator checkbox. Click OK to save your changes. It might take take care of the problem for you. It worked for me. Good luck.
For me this worked:
goto C:\Program Files\Microsoft Visual Studio\VB98
change the property of VB6.EXE by right click->Compatibility In privilege level section, check the option Run this program as Administrator
If you're running Office 2010 (Beta) Word (apparently) writes a restricted registry key. VB throws the error when scanning the registry. The key I have is:
HKCR\TypeLib\{00020905-0000-0000-C000-000000000046}\8.5
For Regmon - Filter for Process Name -> "vb6.exe" and Result -> ACCESS DENIED. Helps find it very quickly.
Fixed it with PSToosl (PSEXEC) to run registry editor. The command line is,
psexec -i -d -s c:\windows\regedit.exe
psexec needs to be run with elevated-permissions.
Edit by Jim: I'm on a Windows 7 (x64) box. Elevated permissions require the PSTools solution. XP can get away with a little less.
You could try Process Monitor to see which registry keys are accessed.
I got this on a machine that I was using for VB6 development. I had been building a lot of COM DLLs from VB6 (without binary compatibility) and the cruft that had built up in the registry eventually got too much.
Have a look at what size the registry is and what limit you have set. I doubled the registry size and then went looking for a good registry hoover.
Here is a solution from Microsoft. It references the Crystal Reports problem, but the solution just uses regedit32 to walk the HKEY_CLASSES_ROOT\TypeLib and HKEY_CLASSES_ROOT\CLSID registry branches for dimmed keys and correcting the security on those keys. There are also instructions to fix the security if regedit32 is unable to access the key. Article ID: 269383
In Windows 7 go to start menu then right click "Microsoft Visual Basic 6" then select properties and click Compatibility from the dialog box that appears then tick "Run this program as an administrator".
Have you tried this? Basically, it seems that it is a crystal reports issue. Hope that helps.
Perhaps worth a try going to the "User Account Control Settings".
Regards,
When I installed VB6 on Win7-64 (using instructions easily found by a search engine), it worked fine. UAC was off -- i.e. set to "never notify."
After a few weeks I turned UAC on -- i.e. set it to its default. VB6 then couldn't compile because of the "Error accessing the system registry" problem. Unfortunately, turning it off again didn't help. Apparently the damage done by turning it on was irreversible. I can't explain why this should be, but that's my experience.
Giving REGTLIB.EXE administrative privileges while leaving UAC off sounded like a great idea, but that didn't work for me either.
Finally, using Process Monitor and PsTools as described in other posts here worked. However, I had to give Full Control to large parts of my registry to Everyone. This didn't apply just to isolated keys. It seems that the compiler needs to add keys to major nodes, so I had to open up these entire nodes.
Aside from the fact that working through these steps took hours, I'm now much more exposed than I was before I tried to increase security via UAC, However, I need VB6 and don't see another solution short of a new computer.
Lesson: Don't use UAC with VB6. Except if you've arrived here it's too late for that.
It's VB6 installation issue. Try to re-intall VB6 on your system. Otherwise open "visual studio 6.0" with "Run as Administrator". Then open/browse your project .vbp file via - New Project -> Existing tab.
I have fixed the problem. But none of the suggestion above worked. What I did is giving everyone full control over the SYSTEM key in the registry. This creats a security break. I am running 64bit Windows 7 with vb6 serice pack 6B.
I'm running Windows 10 Pro (10.0.16299 Build 16299) 64 bit. I was having this error when trying to compile a VB6 DLL.
I saw several answers in this post about running in compatibility mode as administrator. I thought I would first try just running in compatibility mode for Windows XP (sp2). I was able to compile my DLL after checking that box. I didn't need to run as administrator.