I have created a folder to drop the result file from a Pig process using the Store command. It works the first time, but the second time it compains that the folder already exists. What is the best practice for this situiation? Documentation is sparse on this topic.
My next step will be to rename the folder to the original file name, to reduce the impact of this. Any thoughts?
You can execute fs commands from within Pig, and should be able to delete the directory by issuing a fs -rmr command before running the STORE command:
fs -rmr dir
STORE A into 'dir' using PigStorage();
The only subtly is the fs command doesn't expect quotes around the directory name, whereas the store command does expect quotes around the directory name.
Related
This is a very basic question concerning the output files generated from running the Grep utility inside a HDFS directory. Essentially, I've included the grep command inside a simple shell script, which is supposed to search this directory for a given string - which is a parameter to the script. The contents of the script are as follows:
#!/bin/bash
set - e
cd $HADOOP_HOME
bin/hadoop org.apache.hadoop.examples.Grep
"hdfs://localhost:9000/user/hduser" "hdfs://localhost:9000/user/hduser/out" $1
bin/hadoop fs -get "hdfs://localhost:9000/user/hduser/out/*" "/opt/data/out/"
bin/hadoop fs -rm -r "hdfs://localhost:9000/user/hduser/out"
The results sent to the hdfs out directory are copied across to a local directory in the second last line. I've deliberately placed two files in this hdfs directory, only one of which contains multiple instances of the string I'm searching for. What ends up in my /opt/data/out directory are the following 2 files.
_SUCCESS
part-r-00000
The jobs look like they ran successfully, however the only content i'm seeing between both files, is in the "part-r-0000" file, and it's literally the following.
29472 e
I suppose I was naively hoping to see the filename where the string was located, and perhaps a count of the number of times it occurred.
My question is, how and where are these values typically returned from the hadoop grep command? I've looked through the console out while the map reduce jobs where running, and there's no reference to the file name where the search string is stored. Any pointers as to how I can access this information would be appreciated, as I'm unsure how to interpret "29472 e".
I understand like...
You have some jobs' output in HDFS, which you copy to your local.
You are then trying to get the count of a string in the files.
In that case, add the code after the below line
bin/hadoop fs -get "hdfs://localhost:9000/user/hduser/out/*" "/opt/data/out/"
grep -c $1 /opt/data/out/*
This command will do what is expected.
It will give the file name and also the count of strings found in the file.
Does hadoop filesystem shell moving of empty directory?
Assume that I have a below directory which is empty.
hadoop fs -mv /user/abc/* /user/xyz/*
When I am executing the above command , it is giving me the error
'/user/abc/*' does not exists.
However, If I put some data inside /user/abc/* , it is getting executed successfully.
Does anyone know how to handle for empty directory?
Is there any alternative to execute above command without giving error?
hadoop fs -mv /user/abc/* /user/xyz
The destination file doesn't need to add /*
I thinks you want to rename the file.
you also can use this ->
hadoop fs -mv /user/abc /user/xyz
Because you xyz file is empty,so you don't got error.
but if you xyz file has many file,you will get error as well.
This answer should be correct I believe.
hadoop fs -mv /user/abc /user/xyz
'*' is a wild card. So it's looking for any file inside the folder. When nothing found, it returns the error.
As per the command,
When you move a file, all links to otherfiles remain intact, except when youmove it to a different file system.
I am trying to determine if a number of paths exist in hadoop fs using: hdfs fs -test -e filename
However, as I begin to use wildcard * characters in a path to search through all of my directories to find a specific file (for example: /*/*/*/*/*/fileName, etc.), this significantly slows down the process as the test function searches through all directories. While I need this power to be able to find files (I am using a company hadoop cluster where I do not know where a specific file is stored), I would like to know if there is any way to speed up the process similar to this question about php.
I originally used hdfs fs -test -e filename as opposed to hdfs fs -ls filename to test that a file exists after reading this link, because I could easily determine if a file existed without throwing an error, but I am willing to change my code given a better alternative.
I would like to know the best (least time consuming) way to determine if a file exists in hadoop fs given a variable file path location.
Can I perform the search starting from the most current modified directory given the variable file path location?
Is it possible to terminate the search once the file has been found or will the search continue running until all paths have been checked?
Since I am only checking for file existence before I pass the file into a mapreduce job to avoid errors when the job tries to read from the file, should I forget about this time consuming check and simply attempt to catch an error thrown when a file path does not exist?
I have a file sample.txt and i want to place it in hive warehouse directory (Not under the database xyz.db but directly into immediate subdirectory of warehouse). Is it possible?
To answer your question, since /user/hive/warehouse is just another folder on HDFS, you can move any file to the location without actually creating the file.
From the Hadoop Shell, you can achieve it by doing:
hadoop fs -mv /user/hadoop/sample.txt /user/hive/warehouse/
From the Hive Prompt, you can do that by giving this command:
!hadoop fs -mv /user/hadoop/sample.txt /user/hive/warehouse/
Here the first URL is the source location of your file and the next URL is the destination i.e. Hive Warehouse where you wish to move your file.
But such a situation does not generally occur in a real scenario.
I'm trying to run the following example in hadoop: http://hadoop.apache.org/common/docs/current/mapred_tutorial.html
However I don't understand the commands that are being used, specifically how to create an input file, upload it to the HDFS and then run the word count example.
I'm trying the following command:
bin/hadoop fs -put inputFolder/inputFile inputHDFS/
however it says
put: File inputFolder/inputFile does not exist
I have this folder inside the hadoop folder which is the folder before "bin" so why is this happening?
thanks :)
Hopefully this isn't overkill:
Assuming you've installed hadoop (in either local, distributed or pseudo-distributed), you have to make sure hadoop's bin and other misc parameters are in your path. In linux/mac this is a simple matter of adding the following to one of your shell files (~/.bashrc, ~/.zshrc, ~/.bash_profile, etc. - depending on your setup and preferences):
export HADOOP_INSTALL_DIR=/path/to/hadoop # /opt/hadoop or /usr/local/hadoop, for example
export JAVA_HOME=/path/to/jvm
export PATH=$PATH:$HADOOP_INSTALL_DIR/bin
export PATH=$PATH:$HADOOP_INSTALL_DIR/sbin
Then run exec $SHELL or reload your terminal. To verify hadoop is running, type hadoop version and see that no errors are raised. Assuming you followed the instructions on how to set up a single node cluster and started hadoop services with the start-all.sh command, you should be good to go:
In pseudo-dist mode, your file system pretends to be HDFS. So just reference any path like you would with any other linux command, like cat or grep. This is useful for testing, and you don't have to copy anything around.
With an actual HDFS running, I use the copyFromLocal command (I find it to just work):
$ hadoop fs -copyFromLocal ~/data/testfile.txt /user/hadoopuser/data/
Here I've assumed your performing the copying on a machine that is part of the cluster. Note that if your hadoopuser is the same as your unix username, you can drop the /user/hadoopuser/ part - it is implicitly assumed to do everything inside your HDFS user dir. Also, if you're using a client machine to run commands on a cluster (you can do that too!), know that you'll need to pass the cluster's configuration using -conf flag right after hadoop fs, like:
# assumes your username is the same as the one on HDFS, as explained earlier
$ hadoop fs -conf ~/conf/hadoop-cluster.xml -copyFromLocal ~/data/testfile.txt data/
For the input file, you can use any file/s that contain text. I used some random files from the gutenberg site.
Last, to run the wordcount example (comes as jar in hadoop distro), just run the command:
$ hadoop jar /path/to/hadoop-*-examples.jar wordcount /user/hadoopuser/data/ /user/hadoopuser/output/wc
This will read everything in data/ folder (can have one or many files) and write everything to output/wc folder - all on HDFS. If you run this in pseudo-dist, no need to copy anything - just point it to proper input and output dirs. Make sure the wc dir doesn't exist or your job will crash (cannot write over existing dir). See this for a better wordcount breakdown.
Again, all this assumes you've made it through the setup stages successfully (no small feat).
Hope this wasn't too confusing - good luck!