Ruby not compiling on mountain lion - ruby

hi i am trying to get ruby to compile on osx 10.8 mountain lion with rvm, though i keep getting the following error
$ rvm reinstall 1.9.3 --with-readline-dir=$rvm_path/usr
Removing /Users/paulmcguane/.rvm/src/ruby-1.9.3-p194...
it seems that /Users/paulmcguane/.rvm/rubies/ruby-1.9.3-p194 is already non existent.
Removing ruby-1.9.3-p194 aliases...
Removing ruby-1.9.3-p194 wrappers...
Removing ruby-1.9.3-p194 environments...
Removing ruby-1.9.3-p194 binaries...
Installing Ruby from source to: /Users/paulmcguane/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)...
ruby-1.9.3-p194 - #fetching
ruby-1.9.3-p194 - #extracting ruby-1.9.3-p194 to /Users/paulmcguane/.rvm/src/ruby-1.9.3-p194
ruby-1.9.3-p194 - #extracted to /Users/paulmcguane/.rvm/src/ruby-1.9.3-p194
ruby-1.9.3-p194 - #configuring
ruby-1.9.3-p194 - #compiling
Error running 'make ', please read /Users/paulmcguane/.rvm/log/ruby-1.9.3-p194/make.log
There has been an error while running make. Halting the installation.

From my experience, the best way to avoid any problems with that is
osx-gcc-installer

Did you see make.log file and the errors? It might be popular readline error. For that refer this.
Error when installing Ruby 1.9.3 on Mac OS X Lion
Or,
Make error installing Ruby 1.9.2 via rvm OSX Lion 10.7.2 XCode 4.2
Make error installing Ruby 1.9.2 with RVM and Readline under OSX Lion

Related

rvm not installing ruby-2.2; Error running '__rvm_make -j4'

When I try to download Cocoapods, it says:
XXXX: ~ XXX$ sudo gem install cocoapods
Password:XX
ERROR: Error install cocoapods:
minitest requires Ruby version ~> 2.2.
Then I try every way to install ruby but it gives me this:
Searching for binary rubies, this might take some time.
Found remote file https://rvm_io.global.ssl.fastly.net/binaries/osx/10.11/x86_64/ruby-2.2.5.tar.bz2
Checking requirements for osx.
Certificates bundle '/usr/local/etc/openssl#1.1/cert.pem' is already up to date.
Requirements installation successful.
ruby-2.2.5 - #configure
ruby-2.2.5 - #download
ruby-2.2.5 - #validate archive
ruby-2.2.5 - #extract
ruby-2.2.5 - #validate binary
Libraries missing for ruby-2.2.5: __rvm_ls. Refer to your system manual for installing libraries
Mounting remote ruby failed with status 10, trying to compile.
Checking requirements for osx.
Certificates bundle '/usr/local/etc/openssl#1.1/cert.pem' is already up to date.
Requirements installation successful.
Installing Ruby from source to: /Users/vishaljayakumar/.rvm/rubies/ruby-2.2.5, this may take a while depending on your cpu(s)...
ruby-2.2.5 - #downloading ruby-2.2.5, this may take a while depending on your connection...
ruby-2.2.5 - #extracting ruby-2.2.5 to /Users/vishaljayakumar/.rvm/src/ruby-2.2.5.....
ruby-2.2.5 - #applying patch /Users/vishaljayakumar/.rvm/patches/ruby/2.2.5/fix_installing_bundled_gems.patch.
ruby-2.2.5 - #applying patch /Users/vishaljayakumar/.rvm/patches/ruby/2.2.5/openssl3.patch.
ruby-2.2.5 - #configuring......................................................-
ruby-2.2.5 - #post-configuration.
ruby-2.2.5 - #compiling........................................................|
Error running '__rvm_make -j4',
please read /Users/vishaljayakumar/.rvm/log/1581558007_ruby-2.2.5/make.log
There has been an error while running make. Halting the installation.
What do I do?
I have done literally every solution here and it doesn't work:
Github Error Page
Let me just name some of them just for you to see.
rvm get head
rvm mount -r https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.8.tar.bz2
rvm get stable; rvm reload; rvm install "ruby-2.2.X"
anything to do with openssl(I have no idea what it is)
rvm install ruby-2.6.5 --with-openssl-dir='{directory of openssl}
sudo xcode-select -s /Applications/Xcode.app
rvm install 2.6.4
brew install homebrew/portable-ruby/portable-openssl
rvm reinstall ruby-2.3.1 --with-openssl-dir=/usr/local/opt/portable-openssl/
Please give me a solution that is not in here(or one of the above).
I am a little desperate as I have wasted a lot of time on these commands!
I am free to any answers or comments!!!!!

Ruby 1.9.3 Is Not Installing (Mac OS X Lion) [duplicate]

This question already has answers here:
Installing Ruby - RVM - Mac OSX Mountain Lion
(3 answers)
Closed 9 years ago.
Here's my current version of Ruby:
Matts-MacBook-Pro:~ cinicraft$ ruby -v
ruby 1.8.7 (2011-12-28 patchlevel 357) [universal-darwin11.0]
So I want to upgrade to 1.9.3, this is what I'm trying:
Matts-MacBook-Pro:~ cinicraft$ rvm install 1.9.3
Searching for binary rubies, this might take some time.
No binary rubies available for: osx/10.7/x86_64/ruby-1.9.3-p448.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Installing requirements for osx, might require sudo password.
Certificates in '/usr/local/etc/openssl/cert.pem' already are up to date.
Requirements installation successful.
Installing Ruby from source to: /Users/cinicraft/.rvm/rubies/ruby-1.9.3-p448, this may take a while depending on your cpu(s)...
ruby-1.9.3-p448 - #downloading ruby-1.9.3-p448, this may take a while depending on your connection...
ruby-1.9.3-p448 - #extracted to /Users/cinicraft/.rvm/src/ruby-1.9.3-p448 (already extracted)
ruby-1.9.3-p448 - #configuring........
Error running './configure --prefix=/Users/cinicraft/.rvm/rubies/ruby-1.9.3-p448 --with-opt-dir=/usr/local/opt/libyaml:/usr/local/opt/readline:/usr/local/opt/libksba:/usr/local/opt/openssl --disable-install-doc --without-tcl --without-tk --enable-shared',
please read /Users/cinicraft/.rvm/log/ruby-1.9.3-p448/1376080574_configure.log
There has been an error while running configure. Halting the installation.
What the phantom menace is this thing's problem?
Your RVM is out of date.
rvm get head
rvm install 1.9.3

installing ruby 2.0.0 through RVM

I am on Macbook Air (v. 10.8.4) and am trying to install ruby 2.0.0. I did rvm get stable then rvm install ruby-2.0.0. I get this error...
Installing Ruby from source to: /usr/local/rvm/rubies/ruby-2.0.0-p247, this may take a while depending on your cpu(s)...
ruby-2.0.0-p247 - #downloading ruby-2.0.0-p247, this may take a while depending on your connection...
ruby-2.0.0-p247 - #extracted to /usr/local/rvm/src/ruby-2.0.0-p247 (already extracted)
ruby-2.0.0-p247 - #configuring - using Zsh, can not show progress, be patient...
ruby-2.0.0-p247 - #compiling - using Zsh, can not show progress, be patient...
Error running 'make -j4',
please read /usr/local/rvm/log/ruby-2.0.0-p247/1373658495_make.log
There has been an error while running make. Halting the installation.
I tried Can't install Ruby 2.0.0-p0 with RVM. Error running 'make -j8' but I am still getting the same error. As in, I tried
I copied and pasted the log file into a google doc because it was 400+ lines. Link here https://docs.google.com/document/d/1mwiL88KbWYfFge3XKQF2hOJjG_8PzYTdcRFxbZcpUeU/edit?usp=sharing
try running these commands in given sequence: ---
brew update
brew tap homebrew/dupes
brew install apple-gcc42
rvm get stable
rvm install ruby-2.0.0

"ruby -v" no longer returning current version

In the process of trying to upgrade to Ruby 1.9.3, I think I broke something. I believe I have Ruby 1.9.3 successfully installed. However, now when I type ruby -v into terminal, I'm not getting any messages. Here's the sample output:
rish-macbookair:~ rish$ ruby -v
rish-macbookair:~ rish$
One of the last things I did was install the "Command Line Tools" in XCode because I was getting a "missing libraries" error.
Any ideas on what might have happened, or where to start?
Edit: upon trying to reinstall 1.9.3, I get this:
rish-macbookair:~ rish$ rvm reinstall 1.9.3
/usr/local/rvm/src/ruby-1.9.3-p327 has already been removed.
Removing /usr/local/rvm/rubies/ruby-1.9.3-p327...
https://rvm.io/binaries/osx/10.8/x86_64/ruby-1.9.3-p327.tar.bz2 - #configure
ruby-1.9.3-p327 - #download
ruby-1.9.3-p327 - #extract
ruby-1.9.3-p327 - #validate
ruby-1.9.3-p327 - #setup
sed: RE error: illegal byte sequence
Saving wrappers to '/usr/local/rvm/bin'.
ruby-1.9.3-p327 - #importing default gemsets (/usr/local/rvm/gemsets/), this may take time ...
Making gemset ruby-1.9.3-p327 pristine.
Making gemset ruby-1.9.3-p327#global pristine.
rish-macbookair:~ rish$
I have tried reinstalling RVM as well, but I'm back in the same place
you are using old version of rvm, try:
rvm get head
rvm reinstall 1.9.3
rvm use 1.9.3

Trouble in understanding what Ruby version I am "actually"/"effectively" running

I am on Mac OS an I am running Snow Leopard Version 10.6.8. I am using RVM in order to manage my Ruby installations (and so to use the Ruby on Rails framework) but I am in trouble when I see some outputs in the log, mostly related to the current version in use when I get some warning/error message. That is, I previously run these commands in the terminal window:
$ which ruby
/<ABSOLUTE_PATH>/.rvm/rubies/ruby-1.9.2-p290/bin/ruby
$ rvm install 1.9.3
Installing Ruby from source to: /<ABSOLUTE_PATH>/.rvm/rubies/ruby-1.9.3-p0, this may take a while depending on your cpu(s)...
ruby-1.9.3-p0 - #fetching
...
Fetching yaml-0.1.4.tar.gz to /<ABSOLUTE_PATH>/.rvm/archives
Extracting yaml-0.1.4.tar.gz to /<ABSOLUTE_PATH>/.rvm/src
Configuring yaml in /<ABSOLUTE_PATH>/.rvm/src/yaml-0.1.4.
Compiling yaml in /<ABSOLUTE_PATH>/.rvm/src/yaml-0.1.4.
Installing yaml to /<ABSOLUTE_PATH>/.rvm/usr
ruby-1.9.3-p0 - #configuring
ruby-1.9.3-p0 - #compiling
ruby-1.9.3-p0 - #installing
Removing old Rubygems files...
Installing rubygems-1.8.10 for ruby-1.9.3-p0 ...
Installation of rubygems completed successfully.
ruby-1.9.3-p0 - adjusting #shebangs for (gem irb erb ri rdoc testrb rake).
ruby-1.9.3-p0 - #importing default gemsets (/<ABSOLUTE_PATH>/.rvm/gemsets/)
Install of ruby-1.9.3-p0 - #complete
$ which ruby
/<ABSOLUTE_PATH>/.rvm/rubies/ruby-1.9.2-p290/bin/ruby
$ rvm use --default 1.9.3
Using /<ABSOLUTE_PATH>/.rvm/gems/ruby-1.9.3-p0
$ which ruby
/<ABSOLUTE_PATH>/.rvm/rubies/ruby-1.9.3-p0/bin/ruby
Until here it seems to be OK.
However, when I get some error like in this question related to the DelayedJob gem, I see in the log that the system is using still Ruby 1.9.2-p290:
# Note the 'ruby-1.9.2-p290'
undefined method `send_register_email\' for #<Syck::DomainType:0x00000108e2f870>\n/<ABSOLUTE_PATH>/.rvm/gems/ruby-1.9.2-p290/gems/delayed_job-3.0.1/lib/delayed/performable_mailer.rb:6:in
...
What is wrong? How can I solve the issue?
as #sarnold suggests you will have to restart any long running processes such as daemons.
Another thing is that if it is running in a cron tab, make sure the cron task is running as the right user. If you set up RVM for a user, and not the system, then root, or any other user than you didn't set up RVM for, will be using system ruby.
You carefully snipped out ""
Note this can easily happen with
sudo rake some:task # that has to do something as root like open a low port or move a file
this will run as root and not do the right RVM sourcing. To fix this, there is
rvmsudo rake some:task

Resources