My console recently made me aware that the git version I have installed on my Mac has various security flaws and I was advised to upgrade.
I don't know how to use homebrew so I have gone for an easier option. I was recommended to download the following installed by git-scm.com
http://sourceforge.net/projects/git-osx-installer/?source=typ_redirect
I have installed the package but my terminal still shows:
MacBook-Pro-3:~ mruser$ git --version
git version 1.9.0
MacBook-Pro-3:~ mruser$ which git
/usr/local/bin/git
I have noticed that this version is in the /bin/ folder, which may be the problem? Since the other version installs in the /local/ folder.
How do I remove the old git version 1.9.0 so I can successfully install the new version? (without affecting any of the applications I'm working on)
Thanks for having a look and for any input!
The Git in /usr/local (presumably 1.9.0) is shadowing the new release. To determine which program to use, your shell looks through a list of directories stored in your PATH environment variable. You can see it with echo $PATH. Generally /usr/local/bin comes before /usr/bin so you can use newer versions of software without overwriting the system supplied ones.
You need to remove the old version from /usr/local. How you do this depends on where you got Git 1.9.0. If it has an uninstaller, use it. If it doesn't, you can look through /usr/local and delete anything with "git" in it, that will probably be safe.
In the future, use a package manager like Homebrew or Macports. They will track what you have installed and make it much easier to upgrade them.
I’m trying to setup the global config settings for my git installation and when I run the command
git config —global user.name “myname”
I get the following error msg:
error: could not lock config file /Users/vc/.gitconfig: No such file
or directory
my git version on my mac git version 1.9.3 (Apple Git-50)
How can I fix this error?
I found the solution on the following site:
http://coolestguidesontheplanet.com/install-update-latest-version-git-mac-osx-10-9-mavericks/
Under the article, but before you do that, please delete any gui based git installation and then download the latest version of git and follow the instructions below under the title.
Trumping Xcodes Older Git
If you have Xcode already installed and have installed command line tools then you alreay have Git, probably an older version which is distributed with Xcode this is installed in:
/usr/local/bin
To run the lastest version you need to adjust your shell path:
/usr/local/git/bin/git
You need to add add the above path to the beginning of your shell path to take precedence over the other path, the path will be set in either .bashrc or .bash_profile in your home directory.
So add in
/usr/local/git/bin
to the path similar to the below:
export PATH="/usr/local/git/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:$PATH"
Restart or reload the Terminal and the newer Git version will now be used.
I want to use latest version of git (1.8.3).
Currently when I make git --version it shows me git version 1.7.12.4 (Apple Git-37) which was installed together with Xcode I suppose.
I installed newest version but still bash uses Xcode one..
Please advice me how to override xcode git with the path that is installed to usr/local/bin?
Thanks!
Edit ~/.bash_profile and add
alias git=/usr/local/bin/git
Source the bash_profile file or restart bash (source ~/.bash_profile)
See what git --version prints.
I am not sure if this affects XCode. I never use versioning tools in IDEs, I do it from the command line
Or you add /usr/local/bin to $PATH to your bash_profile. I do this with macports or better said macports alters your bash_profile automatically.
export PATH=/usr/local/bin:$PATH
Use a symbolic link to make Xcode use the /usr/local/bin/git instead of its built-in git
cd /Applications/Xcode.app/Contents/Developer/usr/bin/
sudo mv git xcodeGIt
sudo ln -s git /usr/local/git
Disclaimer: typed inline -- but thats how it works. Done it and it works fine for me
I just upgraded to Git 1.8.0.1 for Windows, from my previous version 1.7.9.mysysgit.0. I downloaded the new version from the Git site and installed through the normal Git installer EXE.
That said, when I fire up my terminal window, it still is showing that I am running Git version 1.7.9.mysysgit.0. When I type git --version from my prompt, the same thing.
I found this article on a similar issue with Git on Mac OS X, which leads me to believe that it has something to do with a faulty PATH, but I'm still pretty new at all this (five months self-taught), so I'm at a loss in how to translate this to Windows.
This problem arose when I began a new Ruby on Rails project and tried to push it up to Git. I added the remote:
git remote add origin git#github.com:brianscottk/blog.git
then:
git push -u origin master
I received the following error message:
fatal: https://github.com refs not found: did you run git update-server-info on the server?
Googling that error led me to this article, which prompted me to upgrade, and here I am.
Since Git 2.16.1(2) you can use
C:\> git update-git-for-windows
In version between 2.14.2 and 2.16.1, the command was
C:\> git update
(It was later renamed to avoid confusion with updating the local repository, e.g. like svn update does it.)
That command does not exist in Git 2.13 and before.
If this errors with "is not a git command" then either you don't actually have Git for Windows, or your version is very old.
In which case, simply get the latest installer from https://git-scm.com/download (check whether you want 32- or 64-bit) and run it to upgrade.
If you already have the latest version it does nothing, in which case you can manually run the installer to reinstall.
C:\> git update-git-for-windows
Git for Windows 2.17.0.windows.1 (64bit)
Up to date
First, check your Git version by using this command
git version
Then follow the case according to your Git version
Three cases:
If your Git version is 2.14.1 or earlier:
Uninstall Git, download the latest Git, and install it again.
And versions between 2.14.2 and 2.16.1:
Use command git update
If the version is equal to or greater than Git 2.16.1(2):
Use command git update-git-for-windows
Git Bash
Note, if you are instead looking to find out what version of Git Bash you are running, or want to see if you need to update Git Bash, it is part of Git for Windows.
So your Git Bash version is:
git --version
git version 2.23.0.windows.1
Note that it is technically different from Bash. On my same machine when I run:
echo $BASH_VERSION
4.4.23(1)-release
Git for Windows installer
To update to the latest version of Git and Git Bash, you can download and install the latest version of Git for Windows. As per this FAQ, settings/customizations should be preserved if they were installed in the appropriate configuration folders.
Note: Their installer is actually intelligently designed to do the right thing (though it doesn't tell you upfront that it defaults to your prior settings automatically!).
If you are doing an update, then every screen on the installer is pre-marked with the settings from your current (soon to be previous) install.
It is not showing you generic default settings. You do not need to look any of them up, or fear for breaking your carefully honed setup. Just leave everything as is, to retain your previous choices.
In fact, they made it even easier (if only it was clear that they did so).
There is a checkbox at the bottom [] Show only new settings (I don't remember the exact wording). Since nothing on the first screen changes when you mark the box, it is not exactly obvious what it is for. If you mark the box, then all of your current settings will be retained, and it will skip showing those (subsequent) settings screens to you. Only screens with newly introduced settings will be shown.
git update-git-for-windows
Alternatively, as others have noted, you can also update Git Bash and Git (by definition, both are always updated at the same time) from the Git Bash command line, via:
git update-git-for-windows
If you type git update, Git kindly reminds you that the command has been updated to git update-git-for-windows:
Warning! git update has been deprecated;
Please use git update-git-for-windows instead.
Git for Windows 2.26.0.windows.1 (64bit)
Up to date
Just give the following command with your command prompt.
git update-git-for-windows
This will ask you a confirmation as follows. Press Y to proceed.
Once the files are downloaded, continue with the normal installation procedures. You can check the Git version after finishing installation with the following command:
git version
For me, the result was as follows.
Update (26 September 2016): It is no longer needed to uninstall your previous version of Git to upgraded it to the latest; the installer package found at Git Windows download site takes care of all. Just follow the prompts.
For additional information, follow instructions at installing and upgrading Git.
If you just type
git update-git-for-windows
If you are having issues with it, run Bash as administrator or add the 'git.exe' path to the "allowed apps through controlled folder access".
If you have already installed Git, you can update Git with the command
git update-git-for-windows
to know the current version, use:
git --version
You can run these commands in the cmd prompt.
Check version: git --version
If your Git version is 2.27.0.windows.1 or earlier
If the version is equal to or greater than Git 2.27.0.windows.1
Use command git update-git-for-windows
If you want to see a video tutorial click here.
Just run:
git update-git-for-windows
Use git update-git-for-windows as in this session:
PS Z:\MERN-STACK-ECOMMERCE-PROJECT> git --version
git version 2.31.0.windows.1
PS Z:\MERN-STACK-ECOMMERCE-PROJECT> git update-git-for-windows
Git for Windows 2.31.0.windows.1 (64bit)
Update 2.33.1.windows.1 is available
Download and install Git for Windows 2.33.1 [N/y]? y
############################################################################################################ 100.0%-
############################################################################################################ 100.0%
PS Z:\MERN-STACK-ECOMMERCE-PROJECT> git --version
git version 2.33.1.windows.1
PS Z:\MERN-STACK-ECOMMERCE-PROJECT>
Using the command "where git" find out how command prompt picks up the version. Once you have the path, you can go ahead and uninstall / delete previous version completely. Then if you install and make sure the new installed location is in the path, it should just work fine.
Using git-friendly tools like cmder will make your life much easier. You don't really have to use dual boot or cygwin anymore since the support for git in windows is already top-notch now. (Git for windows installs msysgit which includes all necessary unix tools from MinGW. MinGW has been there for a while and is pretty stable. If you want you can install the full version of msysgit rather than Git for Windows. msysgit is available on Git for windows page at the bottom.)
You can use,
git update
Or if you are on a Windows machine, you can run the command below,
git update-git-for-windows
Based on Simon's answer, I first uninstalled the new version of Git. I then re-installed the new version of Git into the same directory as the old version, C:/RailsInstaller/Git, instead of the default directory C:/Git.
Now my Ruby on Rails terminal window shows that I am running the new Git version 1.8.0.
If you look at the most recent update on Git's website in the "git via git" section you will see an option to update your older version.
Here is the command that git has on their site:
git clone https://github.com/git/git
It worked for my version of git which was a 2.13.0.windows.1.
To check out your PATH variable, act as follows:
From the Desktop, right-click My Computer and click Properties.
Click the Advanced System Settings link in the left column.
In the System Properties window click the Environment Variables button.
Once there, scroll to get the Path row. You'll get a long string of paths (e.g., C:\windows\bin;C:\program files\git, etc.).
Find the line or lines where git is referenced. Then, make sure this path point to your Git 1.8.x installation. If not, delete it and add the real path to the newest Git version. At the end, you should only have one path in the string linking to Git.
I don't think your problem is related to Windows' global PATH environment variable, as remote is specific to repositories.
I recommend you to use Git under Cygwin. Git could work under Windows command line, but there may be some weird problems hard to figure out. Under Cygwin it's more nature and has fewer errors.
All you need is to type bash in Window CMD, and then start to use the Unix tools and commands. You can use a shortcut to load bash; it's as easy as use normal Windows CMD.
The same is true for Ruby on Rails and Ruby. I used RailsInstaller before, but I found using Cygwin to install Rails is more stable.
Finally, I'll suggest to install Ubuntu dual boot if you have time (about a month to get familiar with it). Windows is not very friendly to every Unix tools ultimately. You'll find all pain stopped.
On my Windows 10, > git update-git-for-windows refused to work with curl issues. Only the below command worked.
winget install --id Git.Git -e --source winget
I've installed XCode and therefore git is there as well. Since i want to have a newer version of git I installed using homebrew.
But the homebrew version of git is never called since my PATH looks like this
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
which means the /usr/bin/git is allways called before /usr/local/bin/git.
Is there a way to change that without changing the PATH?
Xcode is actually using the GIT that is stored in /Applications/Xcode.app/Contents/Developer/usr/bin. The same version of GIT gets installed in /usr/bin when you installed the command line tools as part of Xcode installation. So, you won't be able to change what Xcode is using (unless you are willing to muck with the contents of the Xcode package). If, from a terminal application, you want to use the homebrew-installed GIT then you have two options:
Reference GIT with the full path as /usr/local/bin/git ... For this case you can create an alias like alias mgit=/usr/local/bin/git and then use mgit ... from the terminal
Change the path as PATH=/usr/local/bin:$PATH either in your .bashrc or .zshrc if you use zsh file (or each time you start a terminal at the command line).
Since Xcode hard coded its own version of git which is installed on /Applications/Xcode.app/Contents/Developer/usr/bin/git, I managed to use this work around trick:
change into the Xcode directory:
cd /Applications/Xcode.app/Contents/Developer/usr/bin
rename the Xcode's git like this:
sudo mv ./git ./git-xcode-usr-bin
link my own git which is installed through homebrew:
sudo ln -s /usr/local/bin/git ./git
And I did the same thing with /usr/bin/git
This will acctually link /usr/local/Cellar/git/1.8.0/bin/git (because I'm use git 1.8.0 at the present)
Certainly this may cause some other problems, such as when I upgrade the homebrew's verion git in the future, it would not work for me :( and I have to make a new link then.
I do it like this because I want to solve my own problem here 13177203. And after search StackOverFlow for a long time, I finally got this solution.
If you are using fish shell instead of bash, you can point to your preferred git binary by adding the following to ~/.config/fish/config.fish.
function git
/usr/local/bin/git $argv;
end