Related
So I'm trying to run a comparison of different images and was wondering if anyone could point me in the right direction for some basic metrics I can take for the group of images.
Assuming I have two images, A and B, I pretty much want as much data as possible about each so I can later programmatically compare them. Things like "general color", "general shape", etc. would be great.
If you can help me find specific properties and algorithms to compute them that would be great!
Thanks!
EDIT: The end goal here is to be able to have a computer tell me how "similar" too pictures are. If two images are the same but in one someone blurred out a face; they should register as fairly similar. If two pictures are completely different, the computer should be able to tell.
What you are talking about is way much general and non-specific.
Image information is formalised as Entropy.
What you seem to be looking for is basically feature extraction and then comparing these features. There are tons of features that can be extracted but a lot of them could be irrelevant depending on the differences in the pictures.
There are space domain and frequency domain descriptors of the image which each can be useful here. I can probably name more than 100 descriptors but in your case, only one could be sufficient or none could be useful.
Pre-processing is also important, perhaps you could turn your images to grey-scale and then compare them.
This field is so immensely diverse, so you need to be a bit more specific.
(Update)
What you are looking for is a topic of hundreds if not thousands of scientific articles. But well, perhaps a simplistic approach can work.
So assuming that the question here is not identifying objects and there is no transform, translation, scale or rotation involved and we are only dealing with the two images which are the same but one could have more noise added upon it:
1) Image domain (space domain): Compare the pixels one by one and add up the square of the differences. Normalise this value by the width*height - just divide by the number of pixels. This could be a useful measure of similarity.
2) Frequency domain: Convert the image to frequency domain image (using FTT in an image processing tool such as OpenCV) which will be 2D as well. Do the same above squared diff as above, but perhaps you want to limit the frequencies. Then normalise by the number of pixels. This fares better on noise and translation and on a small rotation but not on scale.
SURF is a good candidate algorithm for comparing images
Wikipedia Article
A practical example (in Mathematica), identifying corresponding points in two images of the moon (rotated, colorized and blurred) :
You can also calculate sum of differences between histogram bins of those two images. But it is also not a silver bullet...
I recommend taking a look at OpenCV. The package offers most (if not all) of the techniques mentioned above.
TinEye, the "reverse image search engine", allows you to upload/link to an image and it is able to search through the billion images it has crawled and it will return links to images it has found that are the same image.
However, it isn't a naive checksum or anything related to that. It is often able to find both images of a higher resolution and lower resolution and larger and smaller size than the original image you supply. This is a good use for the service because I often find an image and want the highest resolution version of it possible.
Not only that, but I've had it find images of the same image set, where the people in the image are in a different position but the background largely stays the same.
What type of algorithm could TinEye be using that would allow it to compare an image with others of various sizes and compression ratios and yet still accurately figure out that they are the "same" image or set?
These algorithms are usually fingerprint-based. Fingerprint is a reasonably small data structure, something like a long hash code. However, the goals of fingerprint function are opposite to the goals of hash function. A good hash function should generate very different codes for very similar (but not equal) objects. The fingerprint function should, on contrary, generate the same fingerprint for similar images.
Just to give you an example, this is a (not particularly good) fingerprint function: resize the picture to 32x32 square, normalize and and quantize the colors, reducing the number of colors to something like 256. Then, you have 1024-byte fingerprint for the image. Just keep a table of fingerprint => [list of image URLs]. When you need to look images similar to a given image, just calculate its fingerprint value and find the corresponding image list. Easy.
What is not easy - to be useful in practice, the fingerprint function needs to be robust against crops, affine transforms, contrast changes, etc. Construction of good fingerprint functions is a separate research topic. Quite often they are hand-tuned and uses a lot of heuristics (i.e. use the knowledge about typical photo contents, about image format / additional data in EXIF, etc.)
Another variation is to use more than one fingerprint function, try to apply each of them and combine the results. Actually, it's similar to finding similar texts. Just instead of "bag of words" the image similarity search uses a "bag of fingerprints" and finds how many elements from one bag are the same as elements from another bag. How to make this search efficient is another topic.
Now, regarding the articles/papers. I couldn't find a good article that would give an overview of different methods. Most of the public articles I know discuss specific improvement to specific methods. I could recommend to check these:
"Content Fingerprinting Using Wavelets". This article is about audio fingerprinting using wavelets, but the same method can be adapted for image fingerprinting.
PERMUTATION GROUPING:
INTELLIGENT HASH FUNCTION DESIGN FOR AUDIO & IMAGE RETRIEVAL. Info on Locality-Sensitive Hashes.
Bundling Features for Large Scale Partial-Duplicate Web Image Search. A very good article, talks about SIFT and bundling features for efficiency. It also has a nice bibliography at the end
The creator of the FotoForensics site posted this blog post on this topic, it was very useful to me, and showed algorithms that may be good enough for you and that require a lot less work than wavelets and feature extraction.
http://www.hackerfactor.com/blog/index.php?/archives/529-Kind-of-Like-That.html
aHash (also called Average Hash or Mean Hash). This approach crushes the image into a grayscale 8x8 image and sets the 64 bits in
the hash based on whether the pixel's value is greater than the
average color for the image.
pHash (also called "Perceptive Hash"). This algorithm is similar to aHash but use a discrete cosine transform (DCT) and compares based
on frequencies rather than color values.
dHash Like aHash and pHash, dHash is pretty simple to implement and is far more accurate than it has any right to be. As an
implementation, dHash is nearly identical to aHash but it performs
much better. While aHash focuses on average values and pHash evaluates
frequency patterns, dHash tracks gradients.
It's probably based on improvements of feature extraction algorithms, taking advantage of features which are scale invariant.
Take a look at
Feature extraction
SIFT, other site
or, if you are REALLY interested, you can shell out some 70 bucks (or at least look at the Google preview) for
Feature Extraction & Image Processing
http://tineye.com/faq#how
Based on this, Igor Krivokon's answer seems to be on the mark.
The Hough Transform is a very old feature extraction algorithm, that you mind find interesting. I doubt it's what tinyeye uses, but it's a good, simple starting place for learning about feature extraction.
There are also slides to a neat talk from some University of Toronto folks about their work at astrometry.net. They developed an algorithm for matching telescoping images of the night sky to locations in star catalogs in order to identify the features in the image. It's a more specific problem than what tinyeye tries to solve, but I'd expect that a lot of the basic ideas that they talk about are applicable to the more general problem.
Check out this blog post (not mine) for a very understandable description of a very understandable algorithm which seems to get good results for how simple it is. It basically partitions the respective pictures into a very coarse grid, sorts the grid by red:blue and green:blue ratios, and checks whether the sorts were the same. This naturally works for color images only.
The pros most likely get better results using vastly more advanced algorithms. As mentioned in the comments on that blog, a leading approach seems to be wavelets.
They may well be doing a Fourier Transform to characterize the complexity of the image, as well as a histogram to characterize the chromatic distribution, paired with a region categorization algorithm to assure that similarly complex and colored images don't get wrongly paired. Don't know if that's what they're using, but it seems like that would do the trick.
What about resizing the pictures to a standard small size and checking for SSIM or luma-only PSNR values? that's what I would do.
I'm sure many people have already seen demos of using genetic algorithms to generate an image that matches a sample image. You start off with noise, and gradually it comes to resemble the target image more and more closely, until you have a more-or-less exact duplicate.
All of the examples I've seen, however, use a fairly straightforward pixel-by-pixel comparison, resulting in a fairly predictable 'fade in' of the final image. What I'm looking for is something more novel: A fitness measure that comes closer to what we see as 'similar' than the naive approach.
I don't have a specific result in mind - I'm just looking for something more 'interesting' than the default. Suggestions?
I assume you're talking about something like Roger Alsing's program.
I implemented a version of this, so I'm also interested in alternative fitness functions, though I'm coming at it from the perspective of improving performance rather than aesthetics. I expect there will always be some element of "fade-in" due to the nature of the evolutionary process (though tweaking the evolutionary operators may affect how this looks).
A pixel-by-pixel comparison can be expensive for anything but small images. For example, the 200x200 pixel image I use has 40,000 pixels. With three values per pixel (R, G and B), that's 120,000 values that have to be incorporated into the fitness calculation for a single image. In my implementation I scale the image down before doing the comparison so that there are fewer pixels. The trade-off is slightly reduced accuracy of the evolved image.
In investigating alternative fitness functions I came across some suggestions to use the YUV colour space instead of RGB since this is more closely aligned with human perception.
Another idea that I had was to compare only a randomly selected sample of pixels. I'm not sure how well this would work without trying it. Since the pixels compared would be different for each evaluation it would have the effect of maintaining diversity within the population.
Beyond that, you are in the realms of computer vision. I expect that these techniques, which rely on feature extraction, would be more expensive per image, but they may be faster overall if they result in fewer generations being required to achieve an acceptable result. You might want to investigate the PerceptualDiff library. Also, this page shows some Java code that can be used to compare images for similarity based on features rather than pixels.
A fitness measure that comes closer to what we see as 'similar' than the naive approach.
Implementing such a measure in software is definitely nontrivial. Google 'Human vision model', 'perceptual error metric' for some starting points. You can sidestep the issue - just present the candidate images to a human for selecting the best ones, although it might be a bit boring for the human.
I haven't seen such a demo (perhaps you could link one). But a couple proto-ideas from your desription that may trigger an interesting one:
Three different algorithms running in parallel, perhaps RGB or HSV.
Move, rotate, or otherwise change the target image slightly during the run.
Fitness based on contrast/value differences between pixels, but without knowing the actual colour.
...then "prime" a single pixel with the correct colour?
I would agree with other contributors that this is non-trivial. I'd also add that it would be very valuable commercially - for example, companies who wish to protect their visual IP would be extremely happy to be able to trawl the internet looking for similar images to their logos.
My naïve approach to this would be to train a pattern recognizer on a number of images, each generated from the target image with one or more transforms applied to it: e.g. rotated a few degrees either way; a translation a few pixels either way; different scales of the same image; various blurs and effects (convolution masks are good here). I would also add some randomness noise to the each of the images. The more samples the better.
The training can all be done off-line, so shouldn't cause a problem with runtime performance.
Once you've got a pattern recognizer trained, you can point it at the the GA population images, and get some scalar score out of the recognizers.
Personally, I like Radial Basis Networks. Quick to train. I'd start with far too many inputs, and whittle them down with principle component analysis (IIRC). The outputs could just be a similiarity measure and dissimilarity measure.
One last thing; whatever approach you go for - could you blog about it, publish the demo, whatever; let us know how you got on.
Sometimes two image files may be different on a file level, but a human would consider them perceptively identical. Given that, now suppose you have a huge database of images, and you wish to know if a human would think some image X is present in the database or not. If all images had a perceptive hash / fingerprint, then one could hash image X and it would be a simple matter to see if it is in the database or not.
I know there is research around this issue, and some algorithms exist, but is there any tool, like a UNIX command line tool or a library I could use to compute such a hash without implementing some algorithm from scratch?
edit: relevant code from findimagedupes, using ImageMagick
try $image->Sample("160x160!");
try $image->Modulate(saturation=>-100);
try $image->Blur(radius=>3,sigma=>99);
try $image->Normalize();
try $image->Equalize();
try $image->Sample("16x16");
try $image->Threshold();
try $image->Set(magick=>'mono');
($blob) = $image->ImageToBlob();
edit: Warning! ImageMagick $image object seems to contain information about the creation time of an image file that was read in. This means that the blob you get will be different even for the same image, if it was retrieved at a different time. To make sure the fingerprint stays the same, use $image->getImageSignature() as the last step.
findimagedupes is pretty good. You can run "findimagedupes -v fingerprint images" to let it print "perceptive hash", for example.
Cross-correlation or phase correlation will tell you if the images are the same, even with noise, degradation, and horizontal or vertical offsets. Using the FFT-based methods will make it much faster than the algorithm described in the question.
The usual algorithm doesn't work for images that are not the same scale or rotation, though. You could pre-rotate or pre-scale them, but that's really processor intensive. Apparently you can also do the correlation in a log-polar space and it will be invariant to rotation, translation, and scale, but I don't know the details well enough to explain that.
MATLAB example: Registering an Image Using Normalized Cross-Correlation
Wikipedia calls this "phase correlation" and also describes making it scale- and rotation-invariant:
The method can be extended to determine rotation and scaling differences between two images by first converting the images to log-polar coordinates. Due to properties of the Fourier transform, the rotation and scaling parameters can be determined in a manner invariant to translation.
Colour histogram is good for the same image that has been resized, resampled etc.
If you want to match different people's photos of the same landmark it's trickier - look at haar classifiers. Opencv is a great free library for image processing.
I don't know the algorithm behind it, but Microsoft Live Image Search just added this capability. Picasa also has the ability to identify faces in images, and groups faces that look similar. Most of the time, it's the same person.
Some machine learning technology like a support vector machine, neural network, naive Bayes classifier or Bayesian network would be best at this type of problem. I've written one each of the first three to classify handwritten digits, which is essentially image pattern recognition.
resize the image to a 1x1 pixle... if they are exact, there is a small probability they are the same picture...
now resize it to a 2x2 pixle image, if all 4 pixles are exact, there is a larger probability they are exact...
then 3x3, if all 9 pixles are exact... good chance etc.
then 4x4, if all 16 pixles are exact,... better chance.
etc...
doing it this way, you can make efficiency improvments... if the 1x1 pixel grid is off by a lot, why bother checking 2x2 grid? etc.
If you have lots of images, a color histogram could be used to get rough closeness of images before doing a full image comparison of each image against each other one (i.e. O(n^2)).
There is DPEG, "The" Duplicate Media Manager, but its code is not open. It's a very old tool - I remember using it in 2003.
You could use diff to see if they are REALLY different.. I guess it will remove lots of useless comparison. Then, for the algorithm, I would use a probabilistic approach.. what are the chances that they look the same.. I'd based that on the amount of rgb in each pixel. You could also find some other metrics such as luminosity and stuff like that.
Given two different image files (in whatever format I choose), I need to write a program to predict the chance if one being the illegal copy of another. The author of the copy may do stuff like rotating, making negative, or adding trivial details (as well as changing the dimension of the image).
Do you know any algorithm to do this kind of job?
These are simply ideas I've had thinking about the problem, never tried it but I like thinking about problems like this!
Before you begin
Consider normalising the pictures, if one is a higher resolution than the other, consider the option that one of them is a compressed version of the other, therefore scaling the resolution down might provide more accurate results.
Consider scanning various prospective areas of the image that could represent zoomed portions of the image and various positions and rotations. It starts getting tricky if one of the images are a skewed version of another, these are the sort of limitations you should identify and compromise on.
Matlab is an excellent tool for testing and evaluating images.
Testing the algorithms
You should test (at the minimum) a large human analysed set of test data where matches are known beforehand. If for example in your test data you have 1,000 images where 5% of them match, you now have a reasonably reliable benchmark. An algorithm that finds 10% positives is not as good as one that finds 4% of positives in our test data. However, one algorithm may find all the matches, but also have a large 20% false positive rate, so there are several ways to rate your algorithms.
The test data should attempt to be designed to cover as many types of dynamics as possible that you would expect to find in the real world.
It is important to note that each algorithm to be useful must perform better than random guessing, otherwise it is useless to us!
You can then apply your software into the real world in a controlled way and start to analyse the results it produces. This is the sort of software project which can go on for infinitum, there are always tweaks and improvements you can make, it is important to bear that in mind when designing it as it is easy to fall into the trap of the never ending project.
Colour Buckets
With two pictures, scan each pixel and count the colours. For example you might have the 'buckets':
white
red
blue
green
black
(Obviously you would have a higher resolution of counters). Every time you find a 'red' pixel, you increment the red counter. Each bucket can be representative of spectrum of colours, the higher resolution the more accurate but you should experiment with an acceptable difference rate.
Once you have your totals, compare it to the totals for a second image. You might find that each image has a fairly unique footprint, enough to identify matches.
Edge detection
How about using Edge Detection.
(source: wikimedia.org)
With two similar pictures edge detection should provide you with a usable and fairly reliable unique footprint.
Take both pictures, and apply edge detection. Maybe measure the average thickness of the edges and then calculate the probability the image could be scaled, and rescale if necessary. Below is an example of an applied Gabor Filter (a type of edge detection) in various rotations.
Compare the pictures pixel for pixel, count the matches and the non matches. If they are within a certain threshold of error, you have a match. Otherwise, you could try reducing the resolution up to a certain point and see if the probability of a match improves.
Regions of Interest
Some images may have distinctive segments/regions of interest. These regions probably contrast highly with the rest of the image, and are a good item to search for in your other images to find matches. Take this image for example:
(source: meetthegimp.org)
The construction worker in blue is a region of interest and can be used as a search object. There are probably several ways you could extract properties/data from this region of interest and use them to search your data set.
If you have more than 2 regions of interest, you can measure the distances between them. Take this simplified example:
(source: per2000.eu)
We have 3 clear regions of interest. The distance between region 1 and 2 may be 200 pixels, between 1 and 3 400 pixels, and 2 and 3 200 pixels.
Search other images for similar regions of interest, normalise the distance values and see if you have potential matches. This technique could work well for rotated and scaled images. The more regions of interest you have, the probability of a match increases as each distance measurement matches.
It is important to think about the context of your data set. If for example your data set is modern art, then regions of interest would work quite well, as regions of interest were probably designed to be a fundamental part of the final image. If however you are dealing with images of construction sites, regions of interest may be interpreted by the illegal copier as ugly and may be cropped/edited out liberally. Keep in mind common features of your dataset, and attempt to exploit that knowledge.
Morphing
Morphing two images is the process of turning one image into the other through a set of steps:
Note, this is different to fading one image into another!
There are many software packages that can morph images. It's traditionaly used as a transitional effect, two images don't morph into something halfway usually, one extreme morphs into the other extreme as the final result.
Why could this be useful? Dependant on the morphing algorithm you use, there may be a relationship between similarity of images, and some parameters of the morphing algorithm.
In a grossly over simplified example, one algorithm might execute faster when there are less changes to be made. We then know there is a higher probability that these two images share properties with each other.
This technique could work well for rotated, distorted, skewed, zoomed, all types of copied images. Again this is just an idea I have had, it's not based on any researched academia as far as I am aware (I haven't look hard though), so it may be a lot of work for you with limited/no results.
Zipping
Ow's answer in this question is excellent, I remember reading about these sort of techniques studying AI. It is quite effective at comparing corpus lexicons.
One interesting optimisation when comparing corpuses is that you can remove words considered to be too common, for example 'The', 'A', 'And' etc. These words dilute our result, we want to work out how different the two corpus are so these can be removed before processing. Perhaps there are similar common signals in images that could be stripped before compression? It might be worth looking into.
Compression ratio is a very quick and reasonably effective way of determining how similar two sets of data are. Reading up about how compression works will give you a good idea why this could be so effective. For a fast to release algorithm this would probably be a good starting point.
Transparency
Again I am unsure how transparency data is stored for certain image types, gif png etc, but this will be extractable and would serve as an effective simplified cut out to compare with your data sets transparency.
Inverting Signals
An image is just a signal. If you play a noise from a speaker, and you play the opposite noise in another speaker in perfect sync at the exact same volume, they cancel each other out.
(source: themotorreport.com.au)
Invert on of the images, and add it onto your other image. Scale it/loop positions repetitively until you find a resulting image where enough of the pixels are white (or black? I'll refer to it as a neutral canvas) to provide you with a positive match, or partial match.
However, consider two images that are equal, except one of them has a brighten effect applied to it:
(source: mcburrz.com)
Inverting one of them, then adding it to the other will not result in a neutral canvas which is what we are aiming for. However, when comparing the pixels from both original images, we can definatly see a clear relationship between the two.
I haven't studied colour for some years now, and am unsure if the colour spectrum is on a linear scale, but if you determined the average factor of colour difference between both pictures, you can use this value to normalise the data before processing with this technique.
Tree Data structures
At first these don't seem to fit for the problem, but I think they could work.
You could think about extracting certain properties of an image (for example colour bins) and generate a huffman tree or similar data structure. You might be able to compare two trees for similarity. This wouldn't work well for photographic data for example with a large spectrum of colour, but cartoons or other reduced colour set images this might work.
This probably wouldn't work, but it's an idea. The trie datastructure is great at storing lexicons, for example a dictionarty. It's a prefix tree. Perhaps it's possible to build an image equivalent of a lexicon, (again I can only think of colours) to construct a trie. If you reduced say a 300x300 image into 5x5 squares, then decompose each 5x5 square into a sequence of colours you could construct a trie from the resulting data. If a 2x2 square contains:
FFFFFF|000000|FDFD44|FFFFFF
We have a fairly unique trie code that extends 24 levels, increasing/decreasing the levels (IE reducing/increasing the size of our sub square) may yield more accurate results.
Comparing trie trees should be reasonably easy, and could possible provide effective results.
More ideas
I stumbled accross an interesting paper breif about classification of satellite imagery, it outlines:
Texture measures considered are: cooccurrence matrices, gray-level differences, texture-tone analysis, features derived from the Fourier spectrum, and Gabor filters. Some Fourier features and some Gabor filters were found to be good choices, in particular when a single frequency band was used for classification.
It may be worth investigating those measurements in more detail, although some of them may not be relevant to your data set.
Other things to consider
There are probably a lot of papers on this sort of thing, so reading some of them should help although they can be very technical. It is an extremely difficult area in computing, with many fruitless hours of work spent by many people attempting to do similar things. Keeping it simple and building upon those ideas would be the best way to go. It should be a reasonably difficult challenge to create an algorithm with a better than random match rate, and to start improving on that really does start to get quite hard to achieve.
Each method would probably need to be tested and tweaked thoroughly, if you have any information about the type of picture you will be checking as well, this would be useful. For example advertisements, many of them would have text in them, so doing text recognition would be an easy and probably very reliable way of finding matches especially when combined with other solutions. As mentioned earlier, attempt to exploit common properties of your data set.
Combining alternative measurements and techniques each that can have a weighted vote (dependant on their effectiveness) would be one way you could create a system that generates more accurate results.
If employing multiple algorithms, as mentioned at the begining of this answer, one may find all the positives but have a false positive rate of 20%, it would be of interest to study the properties/strengths/weaknesses of other algorithms as another algorithm may be effective in eliminating false positives returned from another.
Be careful to not fall into attempting to complete the never ending project, good luck!
Read the paper: Porikli, Fatih, Oncel Tuzel, and Peter Meer. “Covariance Tracking Using Model Update Based
on Means on Riemannian Manifolds”. (2006) IEEE Computer Vision and Pattern Recognition.
I was successfully able to detect overlapping regions in images captured from adjacent webcams using the technique presented in this paper. My covariance matrix was composed of Sobel, canny and SUSAN aspect/edge detection outputs, as well as the original greyscale pixels.
An idea:
use keypoint detectors to find scale- and transform- invariant descriptors of some points in the image (e.g. SIFT, SURF, GLOH, or LESH).
try to align keypoints with similar descriptors from both images (like in panorama stitching), allow for some image transforms if necessary (e.g. scale & rotate, or elastic stretching).
if many keypoints align well (exists such a transform, that keypoint alignment error is low; or transformation "energy" is low, etc.), you likely have similar images.
Step 2 is not trivial. In particular, you may need to use a smart algorithm to find the most similar keypoint on the other image. Point descriptors are usually very high-dimensional (like a hundred parameters), and there are many points to look through. kd-trees may be useful here, hash lookups don't work well.
Variants:
Detect edges or other features instead of points.
It is indeed much less simple than it seems :-) Nick's suggestion is a good one.
To get started, keep in mind that any worthwhile comparison method will essentially work by converting the images into a different form -- a form which makes it easier to pick similar features out. Usually, this stuff doesn't make for very light reading ...
One of the simplest examples I can think of is simply using the color space of each image. If two images have highly similar color distributions, then you can be reasonably sure that they show the same thing. At least, you can have enough certainty to flag it, or do more testing. Comparing images in color space will also resist things such as rotation, scaling, and some cropping. It won't, of course, resist heavy modification of the image or heavy recoloring (and even a simple hue shift will be somewhat tricky).
http://en.wikipedia.org/wiki/RGB_color_space
http://upvector.com/index.php?section=tutorials&subsection=tutorials/colorspace
Another example involves something called the Hough Transform. This transform essentially decomposes an image into a set of lines. You can then take some of the 'strongest' lines in each image and see if they line up. You can do some extra work to try and compensate for rotation and scaling too -- and in this case, since comparing a few lines is MUCH less computational work than doing the same to entire images -- it won't be so bad.
http://homepages.inf.ed.ac.uk/amos/hough.html
http://rkb.home.cern.ch/rkb/AN16pp/node122.html
http://en.wikipedia.org/wiki/Hough_transform
In the form described by you, the problem is tough. Do you consider copy, paste of part of the image into another larger image as a copy ? etc.
What we loosely refer to as duplicates can be difficult for algorithms to discern.
Your duplicates can be either:
Exact Duplicates
Near-exact Duplicates. (minor edits of image etc)
perceptual Duplicates (same content, but different view, camera etc)
No1 & 2 are easier to solve. No 3. is very subjective and still a research topic.
I can offer a solution for No1 & 2.
Both solutions use the excellent image hash- hashing library: https://github.com/JohannesBuchner/imagehash
Exact duplicates
Exact duplicates can be found using a perceptual hashing measure.
The phash library is quite good at this. I routinely use it to clean
training data.
Usage (from github site) is as simple as:
from PIL import Image
import imagehash
# image_fns : List of training image files
img_hashes = {}
for img_fn in sorted(image_fns):
hash = imagehash.average_hash(Image.open(image_fn))
if hash in img_hashes:
print( '{} duplicate of {}'.format(image_fn, img_hashes[hash]) )
else:
img_hashes[hash] = image_fn
Near-Exact Duplicates
In this case you will have to set a threshold and compare the hash values for their distance from each
other. This has to be done by trial-and-error for your image content.
from PIL import Image
import imagehash
# image_fns : List of training image files
img_hashes = {}
epsilon = 50
for img_fn1, img_fn2 in zip(image_fns, image_fns[::-1]):
if image_fn1 == image_fn2:
continue
hash1 = imagehash.average_hash(Image.open(image_fn1))
hash2 = imagehash.average_hash(Image.open(image_fn2))
if hash1 - hash2 < epsilon:
print( '{} is near duplicate of {}'.format(image_fn1, image_fn2) )
If you take a step-back, this is easier to solve if you watermark the master images.
You will need to use a watermarking scheme to embed a code into the image. To take a step back, as opposed to some of the low-level approaches (edge detection etc) suggested by some folks, a watermarking method is superior because:
It is resistant to Signal processing attacks
► Signal enhancement – sharpening, contrast, etc.
► Filtering – median, low pass, high pass, etc.
► Additive noise – Gaussian, uniform, etc.
► Lossy compression – JPEG, MPEG, etc.
It is resistant to Geometric attacks
► Affine transforms
► Data reduction – cropping, clipping, etc.
► Random local distortions
► Warping
Do some research on watermarking algorithms and you will be on the right path to solving your problem. (
Note: You can benchmark you method using the STIRMARK dataset. It is an accepted standard for this type of application.
This is just a suggestion, it might not work and I'm prepared to be called on this.
This will generate false positives, but hopefully not false negatives.
Resize both of the images so that they are the same size (I assume that the ratios of widths to lengths are the same in both images).
Compress a bitmap of both images with a lossless compression algorithm (e.g. gzip).
Find pairs of files that have similar file sizes. For instance, you could just sort every pair of files you have by how similar the file sizes are and retrieve the top X.
As I said, this will definitely generate false positives, but hopefully not false negatives. You can implement this in five minutes, whereas the Porikil et. al. would probably require extensive work.
I believe if you're willing to apply the approach to every possible orientation and to negative versions, a good start to image recognition (with good reliability) is to use eigenfaces: http://en.wikipedia.org/wiki/Eigenface
Another idea would be to transform both images into vectors of their components. A good way to do this is to create a vector that operates in x*y dimensions (x being the width of your image and y being the height), with the value for each dimension applying to the (x,y) pixel value. Then run a variant of K-Nearest Neighbours with two categories: match and no match. If it's sufficiently close to the original image it will fit in the match category, if not then it won't.
K Nearest Neighbours(KNN) can be found here, there are other good explanations of it on the web too: http://en.wikipedia.org/wiki/K-nearest_neighbor_algorithm
The benefits of KNN is that the more variants you're comparing to the original image, the more accurate the algorithm becomes. The downside is you need a catalogue of images to train the system first.
If you're willing to consider a different approach altogether to detecting illegal copies of your images, you could consider watermarking. (from 1.4)
...inserts copyright information into the digital object without the loss of quality. Whenever the copyright of a digital object is in question, this information is extracted to identify the rightful owner. It is also possible to encode the identity of the original buyer along with the identity of the copyright holder, which allows tracing of any unauthorized copies.
While it's also a complex field, there are techniques that allow the watermark information to persist through gross image alteration: (from 1.9)
... any signal transform of reasonable strength cannot remove the watermark. Hence a pirate willing to remove the watermark will not succeed unless they debase the document too much to be of commercial interest.
of course, the faq calls implementing this approach: "...very challenging" but if you succeed with it, you get a high confidence of whether the image is a copy or not, rather than a percentage likelihood.
If you're running Linux I would suggest two tools:
align_image_stack from package hugin-tools - is a commandline program that can automatically correct rotation, scaling, and other distortions (it's mostly intended for compositing HDR photography, but works for video frames and other documents too). More information: http://hugin.sourceforge.net/docs/manual/Align_image_stack.html
compare from package imagemagick - a program that can find and count the amount of different pixels in two images. Here's a neat tutorial: http://www.imagemagick.org/Usage/compare/ uising the -fuzz N% you can increase the error tolerance. The higher the N the higher the error tolerance to still count two pixels as the same.
align_image_stack should correct any offset so the compare command will actually have a chance of detecting same pixels.