I am not sure what is the best way to word my question correctly in single line. But basically I have seen quite a few video tutorials now where the coder types really fast using some sort of shortcut to fill in the automatic text(prolly intellisense stuff) It looks very similar to Linux command line tab where you only type half of your text and when you hit tab it either fills in the gap or show you the remaining options.
Hope that makes sense.
Thanks
Pressing Ctrl+Space completes the current variable/class you are typing.
Typing things like ctor and then pressing the Tab key twice tells Visual Studio to insert a constructor for you. (Also works with for for a for loop, cw for a Console.WriteLine();, etc.)
For a full list, please refer to the official reference from MSDN.
I believe its Ctrl-Space, which is pretty common among most IDE's
Related
When I'm working at someone else's code, sometimes it happens that I've found something useful that I likely will need to return later to.
Except the chances are that I forget where I've found that part and then I need to find it again. Nowadays I'm mostly using breakpoints to set these down, But I don't need these breakpoints for debugging, so I don't think that's the most efficient method. Something that could work for me is a sort of marker that functions marking down like a breakpoint, but does not affect debugging.
Will all these ways of breakpoints, search functions, finding references, and adding a Watches. I do have a feeling that such feature is present in Visual Studio already. But I havn't found it yet, I've already tried searching it up, but it looks like it hasn't asked before.
So, is there a feature in Visual Studio that let you mark down code like breakpoints, but just for the purpose of marking down?
There is more than one way to do so.
If I finde something interesting I mark it with a Bookmark.
Just STRG + K, STRK + K and it will be places on your current row.
With these Buttons you can switch to your bookmarks or delete them all. They are client based.
Visual Studio also gives you a "To Do List" Function. This one is triggered by comments in the code and seen for everyone with the right options used.
See here how it works in detail.
Yes, it's called a bookmark. This little toolbar is for bookmarks:
You can also use the Edit, Bookmarks... menu item and the View, Other Windows, Bookmark Window which among other things lets you see all of them and give them names.
One caveat: the bookmark binds to the line number, and doesn't move if you add or remove lines. So if you bookmark the first line of a function, then make changes above that, the bookmark won't be on the first line of a function any more.
I know about basic features of visual studio debugging. F10, F11, Shift+F11, Ctrl+F10.
If I am inside a for loop is there a way of stopping right after the loop is completed?
Right now the way I am doing it is to manually go to the location after the loop and press Ctrl+F10. Is there a better way of doing this?
There is no dedicated "Step Out of Loop" command in Visual Studio. "Step Out" (Shift+F11) works only for functions. There are only two options that I can think of:
Like Brian suggests, there is Run to Cursor, which has been there at least since VC++ 6. This is what you're already getting with the Ctrl+F10 keyboard shortcut. I use this literally all the time while debugging; it's an extremely useful tool. I don't really understand why you think this is a lousy way of doing it, or why you think there should be a "better" way.
You could set a simple breakpoint on the line of code immediately following the loop. This is relatively simple if you use the keyboard shortcut F9. But you still have to navigate to the appropriate line of code, so you might as well use Run to Cursor.
If you're working in a C-derived language, your loops probably conclude with a }. So you could use the Ctrl+] keyboard shortcut to move to the matching brace in the source file if your caret is at the loop's opening brace. That might make navigation easier. It certainly can help avoid moving your hands over to the mouse, killing precious seconds.
* Note that keyboard combinations are subject to change, depending on how you have configured your Visual Studio environment.
I just found out that if you hover with your cursor at beginning of the desired line, VS automatically blends in a little play symbol. When you click on it, debugger jumps to this point.
Perhaps you would like to use a breakpoint, which can be used to trigger the debugger once your program has reached a specific line. You can set one by clicking on the left side of the code line, where errors and arrows usually show up during debugging. Hope this helps!
Simple way is to put a break statement in the for loop and add a condition. This will allow you to test the loop while debugging.
Does anybody know a light plug-in that do (same as Resharper) go to implementation and the quick search for a file where you just insert few characters and it shows the matches? I just want to get rid of Resharper cause it slows me down a lot!!
To answer the original question, as per this post by Andrew Arnott, you can use Ctrl+/ to move the cursor to the Find text box in the toolbar, then type ">of" and start typing file names. The matching files will appear as you type.
Using the ">" prefix causes the find text box to act as the command window would.
(Note that the Ctrl+/ short-cut may be overridden by ReSharper to comment a line of code, so this short-cut only works with ReSharper uninstalled.)
That's interesting. I use ReSharper and it uses about 400mb of RAM. I would consider that pretty low usage.
Maybe you can look into Productivity Power Tools (I don't use it).
http://visualstudiogallery.msdn.microsoft.com/d0d33361-18e2-46c0-8ff2-4adea1e34fef/
There is a command in Visual Studio 2005 called Edit.SelectToLastGoBack (bound to Ctrl + =).
I presume it is supposed to select all the text between the current cursor position and the last 'Go Back' point, but I can't work out the algorithm it's using for deciding what that point is.
Does anyone know how to use this potentially very useful command?
Selects to the last juimp point ...
Try using the navigation bar to jump to another method in class. Then press Ctrl + "="
It will select from the start of method you jumped to all the way back to where you jumped from.
I have yet to find a use for it though TBH,
Kindness,
Dan
I use it for recording macros.
Frequently I want to select everything from this brace to that brace and cut it in a macro. Go to the first brace, hit ctrl-f (ctrl-i doesn't work right in macros), search to the second brace, close search with escape, and hit ctrl-= to get everything between the braces selected. This is much more reliably repeatable in a macro than something like using ctrl arrows to navigate a word at a time while holding down shift, and is similar to the emacs concept of setting a mark point.
I'm not sure what all starts a new 'location in navigation history', but I'm sure starting a search does and that's all I need.
I just discovered this command is available in Visual Studio 2012. I've been looking for it ever since I got VS 2012. I kept thinking it was something like anchor, like select everything between the anchor and point. I was disappointed that macro recording and playing are no longer available. But I am glad this command still exists.
Another useful command is ctrl+k ctrl+a, which is Edit.SwapAnchor. So, you could be someplace in the code, then do a find. Now you have the point and anchor (maybe also known as the cursor and last goback). You can do ctrl+= to select, then ctrl+k ctrl+a then extend from the other end using another find--or something like that.
I find that I am cutting and pasting a LOT when I program. For example, method, variable and class names are things I regularly cut/paste. I do use "ctrl+space" after typing part of a word to autocomplete them or popup intellisense when there's duplicates found.
But just for straight copy/pasting do you guys have any good shortcuts/tricks/tips to use?
I already use these shortcuts as I program but I wonder if I am missing anything?
ctrl+x (with nothing selected)
ctrl+v (with nothing selected)
ctrl+l (with nothing selected)
ctrl+shift+arrowKeys
If I could copy/paste quicker I think I'd be able to write code quite a bit faster.
In Visual Studio has multi-paste.
pressing Ctrl+Shift+V allows you to paste any of the 10 last things you cut/copied.
Install and learn ViEmu.
I have more of a hardware solution. On my MS 4000 keyboard I have the back and forward buttons right under the space bar bound to copy and paste respectively. This actually makes copying and pasting much easier than I thought it would when I first did it.
I use ClipX, which gives you system-wide multi-paste. You can paste any of the last [configurable number] of things in your clipboard. You can also save "favourite" items, which stick on the list forever.
Shift + Page Up/Down to select everything below/above the cursor.
If you're not using ctrl+shift+arrow to select whole words/lines, then that can help a lot.