I have created the setup of window form application using visual studio setup project.
It install fine and works fine my application.
But when i uninstall the application it uninstall properly without any error, but the service of the application does not remove from services.
I don't know why this happens.
Please somebody help me. thank you in advance.
I have a same issue in my application.
I just add the window restart code in installer class, so when i uninstall the application system restarts and application process & service both have removed.
There are a few possible reasons for this:
You did not add your installer class to every node of the custom actions list in your setup project. In other words, maybe there is no uninstall custom action so the service won't be uninstalled.
If there is an uninstall method, it will typically not stop your service unless you do that, by adding shutdown code to an override, before base.Uninstall(). That means it will attempt to uninstall it, probably mark it as Disabled in the services applet and remove it at the next reboot.
You might be using Installer classes (without using custom actions) and trying to run InstallUtil.exe. This is not the right way to do it, but if you didn't run it as uninstall custom action then you haven't uninstalled, and number 2 still applies. Finding InstallUtil.exe to do this is not safe anyway.
Having said that you still haven't been explicit about how you used installer classes, if they are custom actions, or if you're running InstallUtil.exe, if there is an uninstall custom action, and what is the exact state of the service after the uninstall.
I installed a retail version of Windows 8 Pro. I downloaded and installed Visual Studio Express 2012. I asked for and received a developers certificate. Then I tried to create a hello world app.
From there I get a "Unable to Activate Windows Store App" message box when I try to debug the app. Most commentary on the web says delete build directories. This didn't work for me
Does anyone have a solution for how to fix this and debug my app?
This happened to me once too, but the deleting build directories advice fixed it. Specifically, you just need to delete the bin\Debug and bld\Debug folders in your projects. Their contents will be regenerated by Visual Studio when you rebuild. I assume that this is only one project since it's a Hello World app; otherwise I would ask if you deleted build directories from all projects in your solution.
You can also try running "Clean Solution" from the BUILD menu in Visual Studio.
I'm sorry...it's horrible if this is happening on a clean install as you describe.
I ran into the same issue, and tried rebuilding, cleaning, deleting temp files, rebooting the computer, etc... and nothing helped.
Then finally I made a release build then went back to debug. And now it works.
I have no idea what happened, nor if that really helped, but it's worth a try.
For me a RESTART of pc solved this error message.
For me the problem was that I created the app on a TrueCrypt mounted virtual drive and when I moved the project files to a normal drive then everything worked just fine. Weird.
I was getting the exact same error. In my case the culprit was a NuGet package. It had added an app.config file to the project and it was confusing VS. I removed the app.config file and it solved my issue.
I got the solution at Iris Classon's site.
This can be solved by Uninstalling the app from the start screen then again building the app from Visual Studio.
I had a similar problem, and the cause was creating the project on a USB thumb drive. Creating a project on a normal hard drive volume works.
this can happen when the application signing key (.pfx file) is missing.
Try the following:
Open the Package.appxmanifest file in Visual Studio
Go to the register "Packaging"
Select [Choose Certificate…]
Select the test certificate using [Configure Certificate…] [From File…], or create a new one using [Configure Certificate…] [Test Certificate…]
When using a test certificate, ensure that it is in the .gitignore file. There should be an entry like !**\*_TemporaryKey.pfx to include the key in Git.
Note: The certificate for release build should only be available to the build server and not included in Git.
Rebuild the project
This has happened to me in the past and I have always found that deleting the build directories resolves it.
However this time this is not working for me.
I have tried
- Rebooting
- Deleting build directories
- Running Build | Clean Solution in VS
- Renewing Developer Account
The only thing that will work for me is changing my Package name under the Package.appxmanifest
However I am not overly happy with this as a solution. I will keep investigating.
The issue might be caused because NuGet will try to add an app.config with binding redirects to Windows Store apps if it thinks it is needed. However, Windows Store apps don’t need app.config, and will actually fail to start with a very confusing error message if it is present.
And the solution in this case would be to Remove the App.config
This error generally comes when you try to deploy in debug mode.
I would suggest, deploy the app first in release mode and then try in debug mode.
This worked for me.
Making a new certificate works for me. For this, go to Package.manifest->Packaging, and follow the Choose certificate.... Click on Configure certificate and select Create test certificate. Give it a name and press OK.
Increasing the revision number of the package worked for me
Tried so many of the above fixes. Nothing worked (deleting bin, obj dirs, editing the manifest, editing the registry, changing package name, etc, etc.) My Avast antivirus software was running and so I uninstalled it completely. That was it. App now runs fine.
This sort of problems are common with Windows 8 Visual Studio. Such errors encounters when your developer license of Visual Studio has expired so you may want to renew or get a new developer license here's how you get that. How to get a developer license in Windows 8
And similar problem may also encounter with E_Fail issues here's how to solve Unable to activate Windows Store app E_Fail Issue
For me, the fix was a combination of two of these answers -
Renew the developer license (How to get a developer license in Windows 8)
And deleting the build directories (though I deleted more then the screenshot depicted) Delete the Build directories
NuGet will try to add an app.config with binding redirects to Windows Store apps if it thinks it is needed. However, Windows Store apps don’t need app.config, and will actually fail to start with a very confusing error message if it is present.
Solution:
Remove the App.config
and build again
For those who get a similar error but who are searching for a solution while debugging an IOT background app on a local machine specifically - you can find it here.
Using the search term "unable to activate windows store app the activation request failed with error" brought me here.
Because of Two things i resolved this issue.
Basically, we just need to delete the bin\Debug and bld\Debug folders in our projects. Those contents will be regenerated by Visual Studio when you rebuild project.
Just Restart the Visual Studio. And Clean Build and Rebuild the solution and RUN it.
Hope this helps.,
Playing with this issue for 3 days, tried every suggestions, nothing works. Until now!!!
The solution was this for me:
renew developer licence
build and deploy solution in Release mode (after this step it still not worked, but VS installed some packages in rpi)
start VS remote debugger with default account (http://:8080/#Debug%20settings)
configure remote device with Universal authentication mode (VS2017 -> Project settings -> debug -> target device: remote machine, authentication mode: Universal (unencrypted protocol))
...and now I can sleep.
Hope it helps somebody.
This gift was courtesy of Microsoft's automatic updates for VS2015 which was one of the 2 culprits:
KB3022398
KB3165756
It also broke SourceTree and other apps that draw the GUI - making an outline of the app but not drawing the contents.
For me changing the Package Name in Package.appxmanifest fixed the problem
In my case, the C# UWP app had a native library which failed in the application startup code, and called exit(1). The symptoms were identical to those in the question, though. Visual Studio would throw a message:
Unable to activate Windows Store app '88888888-6666-5555-4444-111111111111_abcdefgh!App'. The Acme.exe process started, but the activation request failed with error 'Operation not supported. Unknown error: 0x80040905'.
In addition, there was a message in the UWP app Windows log under Microsoft\Windows\Apps\Microsoft-Windows-TWinUI/Operational: event ID 5961, message:
Activation for 88888888-6666-5555-4444-111111111111_abcdefgh!App failed. Error code: Unknown HResult Error code: 0x80040905. Activation phase: COM App activation
Internally, the C# part would try to construct a native class instance from the App constructor, the native class constructor would encounter an unrecoverable error and bail. From the UWP subsystem standpoint, and from the debugger standpoint, though, this looked as something distinct from the mere programmatic exit. I'll leave this answer here, 'cause I've spent some time chasing various UWP failure scenarios instead of running under a native debugger.
I've replaced the exit() call with throw ref new Exception(E_INVALIDARG). At least this way the error manifests in the managed debugger, and the message is descriptive.
I've been having this problem a lot with a UWP Windows 10 app on Visual Studio 2019...for me the reliable workaround is to bump the Build number in the Package.appxmanifest file (Packaging tab). It's a huge pain...really hope Microsoft will sort this out soon
Any existing error in the code can also cause this issue. Make sure your previous version of the code is working fine. Compare the difference and make sure all looks good.
I was getting this error and nothing else worked so I had to dissect my program. Turns out I referenced a StaticResource in my App.xaml that didn't exist.
Seems like a silly error but you'd also think Visual Studio would pick up on something like that and throw a different error so if nothing else works, double check your application resources.
As suggested by #Iman in a comment, in the UWP project settings, enable "Compile with .NET Native tool chain".
(After trying just about every answer in this question)
I wrote a "Hallo world" type Windows Forms application in C# to test authentication issues. I'm going to be running the eventual application from a server periodically, so I want to be sure I can get to the resources, and fix that before committing to the whole application.
So, in Visual Studio 2010, I choose Publish....
It says "Where?", and I specify a folder on a shared file system.
It says "How will your users install", and I say, "URL" or something like that.
It says "Where", and I give it a URL in the same shared file system, different folder.
All is right with the world....
Now, I install it on my server by double-clicking "setup" on the shared file system where I published the application.
Now, I find a shortcut in my start menu, all good.
Now, I want to set it up so SQL Server Agent executes it periodically (and tests authentication...) so, what is the URL I give it to execute? I've been trying everything, but not going so well. I don't understand the publish method much at all....
How can I fix this problem?
Look at the Start menu shortcut for your installed application and you'll see that it points to a "ClickOnce Application Reference" (.appref-ms) file buried deep within your user folder. You can start the application by executing that file.
Example:
Process.Start(#"C:\Users\Igby\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Microsoft\MyClickOnceApp.appref-ms");
I don't know anything about SQL Server Agent, but try giving it this path.
i have created a application in VB6.0 which is connected to MySQL through ODBC connection,there are two dsn which connects to application.Now i want to create a setup of the application that i can install on any computer.but how? I tried using Package and Development wizard in VB but it gives me error "access denied ieframe.dll" something like that while installing it AND also after using that wizard,now all my forms are corrupt.I craeted new and i don't want this to happen again.Help me!!
tired googling now!!!
I am not sure of the version of VB6 you are running, I do know that there was an InstallSheild Light version that shipped with Visual Studio 6 Professional. It was an optional install. If you have your original installation media try looking for it. There was also Visual Studio Installer 1.1 that used to be available from Microsoft. I found a link on Web.Archive.org that still works. I have used this to build msi files for VB6 in the past. You need to have Visual Interdev because it gets added as project type to it.
And since you mentioned that the Package and Deployment Wizard corrupted your project, you should make a backup of your data or use some type of source control. It will be a lot less painfull to recover when problems occur.
First of all, I take it that the two DSNs are not relevant to this problem?
I have never seen the error "access denied ieframe.dll", but I would guess that you are trying an installation via internet explorer. I would try creating a standard application installation.
I have to say that I am surprised to hear of "corruption" of your forms. Do you really mean your source code? Or this the forms in the executable. In any case, you really should be using some form of source control.
In any case, if you want a better answer, try giving a step by step run-throught of exactly what you are doing.
Regards,
Mark
I’m trying to create a set-up project for a windows service. I’ve followed this tutorial and many others like it but, after installing my service, I still can’t see the service. I’ve added the primary output of the service to the application directory and created a custom action to include this output on Install, Commit, Rollback and Uninstall.
It claims that it installs correctly.
Should this work? Is there anything else that I can try to get this to install?
Did you create an installer for your service? It is separate from a Setup Project.
See: http://msdn.microsoft.com/en-us/library/system.serviceprocess.serviceinstaller.aspx
You can create an Installer by right-clicking on your service's Design window and selecting Add Installer.
In my case, adding the installer was a first step as described by dhirschl's answer. I then needed to add custom actions to the setup project.
Right click the setup project/view/custom actions
then add the primary output to every folder there.
Source