Trying to retrive the MAX doc in the right table.
SELECT F43.PDDOCO,
F43.PDSFXO,
F43.PDLNID,
F43.PDAREC/100 As Received,
F431.PRAREC/100,
max(F431.PRDOC)
FROM PRODDTA.F43121 F431
LEFT OUTER JOIN PRODDTA.F4311 F43
ON
F43.PDKCOO=F431.PRKCOO
AND F43.PDDOCO=F431.PRDOCO
AND F43.PDDCTO=F431.PRDCTO
AND F43.PDSFXO=F431.PRSFXO
AND F43.PDLNID=F431.PRLNID
WHERE F431.PRDOCO = 401531
and F431.PRMATC = 2
and F43.PDLNTY = 'DC'
Group by
F43.PDDOCO,
F43.PDSFXO,
F43.PDLNID,
F43.PDAREC,
F431.PRAREC/100
This query is still returning the two rows in the right table. Fairly new to SQL and struggling with the statement. Any help would be appreciated.
Without seeing your data it is difficult to tell where the problem might so I will offer a few suggestions that could help.
First, you are joining with a LEFT JOIN on the PRODDTA.F4311 but you have in the WHERE clause a filter for that table. You should move the F43.PDLNTY = 'DC' to the JOIN condition. This is causing the query to act like an INNER JOIN.
Second, you can try using a subquery to get the MAX(PRDOC) value. Then you can limit the columns that you are grouping on which could eliminate the duplicates. The query would them be similar to the following:
SELECT F43.PDDOCO,
F43.PDSFXO,
F43.PDLNID,
F43.PDAREC/100 As Received,
F431.PRAREC/100,
F431.PRDOC
FROM PRODDTA.F43121 F431
INNER JOIN
(
-- subquery to get the max
-- then group by the distinct columns
SELECT PDKCOO, max(PRDOC) MaxPRDOC
FROM PRODDTA.F43121
WHERE PRDOCO = 401531
and PRMATC = 2
GROUP BY PDKCOO
) f2
-- join the subquery result back to the PRODDTA.F43121 table
on F431.PRDOC = f2.MaxPRDOC
AND F431.PDKCOO = f2.PDKCOO
LEFT OUTER JOIN PRODDTA.F4311 F43
ON F43.PDKCOO=F431.PRKCOO
AND F43.PDDOCO=F431.PRDOCO
AND F43.PDDCTO=F431.PRDCTO
AND F43.PDSFXO=F431.PRSFXO
AND F43.PDLNID=F431.PRLNID
AND F43.PDLNTY = 'DC' -- move this filter to the join instead of the WHERE
WHERE F431.PRDOCO = 401531
and F431.PRMATC = 2
If you provide your table structures and some sample data, it will be easier to determine the issue.
Related
I had an issue with the LEft outer join and my query was little bit wierd. Tried searching for it , but did not get any clues.
This is happening due to were clause has been added.
The query below is not working as expected.
SELECT count(*) from
BN_DATA_TEMP.EDS_DELIVERYITEM_GBQ_SAMPLE_DATA A
LEFT OUTER JOIN BN_DATA_TEMP.TBL_EDS_DELIVERYITEMS_DATES B
on (
to_Date(substr(A.LASTUPDATEDTIME,1,10)) = '2020-05-31'
and to_Date(substr(B.LASTUPDATEDTIME,1,10)) = '2020-05-31'
and A.deliveryid = B.deliveryid )
where B.deliveryid is null;
Trying to get Records in A but not in B. But the count is very different and it is wrong.
I need to consider only the dates with 2020-05-31 from both the tables.
Modified like the below and it gave the correct result.
select count(*) from
(SELECT * from
BN_DATA_TEMP.EDS_DELIVERYITEM_GBQ_SAMPLE_DATA where to_Date(substr(LASTUPDATEDTIME,1,10)) = '2020-05-31' ) A
LEFT OUTER JOIN
(select * from
BN_DATA_TEMP.TBL_EDS_DELIVERYITEMS_DATES where to_Date(substr(LASTUPDATEDTIME,1,10)) = '2020-05-31' ) B
on A.deliveryid = B.deliveryid
where B.deliveryid is null;
I have never use much of Left outer joins for Data validation. So thought of posting over here and learn the same.
Thanks in Advance.
I have a sql that is selecting many things from the database however I would like that data to only comeback which is matched to a personal table I have.
I would like to join a column [vin_code] from my table [population] however there are nulls in here and were there are nulls I would like to join another column from my table to another table in the database.
I will give an example sql below:
Select distinct v.kegal_rntity_id
From vin v
Inner join ops$dami.population pop
On v.vin_code = pop.vin_code
Then were pop.vin_code is null I would like to join pop.vis_code on a table in the database called zegal_rentity z column z.vis_code
So something like
join zegal_rentity z
On pop.vis_code = z.vis_code
But I only want to do this were pop.vin_code is null
As sample data is not available, I am unable to test the solution but try the following query with condition based outer join.
Select distinct v.kegal_rntity_id
From ops$dami.population pop
Left join vin v
On v.vin_code = pop.vin_code
Left join zegal_rentity z
On (case when pop.vin_code is null and
pop.vis_code = z.vis_code then 1 end = 1);
Cheers!!
I want some help to optimize this SQL Query.
This is working completely fine. I just want to reduce the runtime of this query
select distinct
o.usrp_order_number,t.*
from ms_bvoip_order_extension oe
inner join ms_order o on oe.ms_order_id = o.ms_order_id
inner join ms_sub_order so on so.ms_order_id = o.ms_order_id
inner join ms_job j on j.entity_id = so.ms_sub_order_id
left join mstask t ON t.wf_job_id = j.wf_job_id
where
o.order_type = 900
and o.entered_date between date_sub(current_date(),53) and
date_sub(current_date(),3)
and j.entity_type = 5 and t.name RLIKE 'Error|Correct|Create AOTS Ticket' and t.wf_job_id is not null
order by
o.usrp_order_number
The WHERE conditions are being executed after joins in Hive (though CBO and PPD may change this behavior), better study the EXPLAIN output for both queries. You can move conditions like this: o.order_type = 900 to the join ON clause to reduce rows on join. Only non-equi conditions involving both tables columns are not allowed in the join ON clause in Hive. Also table t is left-joined, but conditions in the where: t.name RLIKE 'Error|Correct|Create AOTS Ticket' and t.wf_job_id is null and t.ORIGINAL_START_DATE is not null transform left join to the inner join. Check do you need INNER or LEFT JOIN
select distinct
o.usrp_order_number,t.*
from ms_bvoip_order_extension oe
inner join ms_order o
on oe.ms_order_id = o.ms_order_id
and o.order_type = 900
and and o.entered_date between date_sub(current_date(),53) and date_sub(current_date(),3)
inner join ms_sub_order so on so.ms_order_id = o.ms_order_id
inner join ms_job j on j.entity_id = so.ms_sub_order_id
and j.entity_type = 5
left join mstask t on t.wf_job_id = j.wf_job_id
and t.name RLIKE 'Error|Correct|Create AOTS Ticket'
and t.wf_job_id is null
and t.ORIGINAL_START_DATE is not null
order by o.usrp_order_number
Also read this answer about configuration settings: https://stackoverflow.com/a/48487306/2700344
be sure you have proper index on
table ms_order a composite index on columns entered_date, order_type, ms_order_id
table ms_job a composite index on columns entity_type, entity_id
table mstask a composite index on columns wf_job_id, ORIGINAL_START_DATE
table ms_sub_order an index on column ms_order_id
table ms_bvoip_order_extension and index on column ms_order_id
You will need to add indexes for the columns that you are filtering by.
We do not know how many records each of your tables are holding, but the t.name RLIKE criteria should be evaluated as the very last item. I would rewrite your query based on the following idea:
select ...
from
(
select ...
inner join ...
inner join ...
inner join ...
left join ...
where ...
) temporary
where temporary.somename RLIKE 'Error|Correct|Create AOTS Ticket'
o.usrp_order_number
If the query is not very dynamic, then you can even cache the results for a while.
I have three tables
CLAIMS_TB
CLAIMS_RISK_TB
VEHICLE_TB
And then I need this result below:
Who can help me or share with me the query to be used?
N.B: If the code is 700 it means that it is a vehicle and it must fill the column called "ai_vehicle_use" otherwise it must leave it blank because "VEHICLE_TB" table contains only vehicles
This is what I tried:
select
klm.CM_PL_INDEX,
klm.cm_no,
klmrisk.cr_risk_code,
CASE WHEN klm.CM_PR_CODE = '0700' THEN klmrisk.cr_risk_code ELSE '' END,
veh.ai_vehicle_use
from CLAIMS_TB klm
JOIN CLAIMS_RISK_TB klmrisk
ON (klm.cm_index = klmrisk.cr_cm_index)
INNER JOIN VEHICLE_TB veh
on veh.ai_regn_no = klm.cm_no
where klm.cm_no='CL/01/044/00001/01/2018'
or klmrisk.cr_cm_index='86594'
order by klmrisk.cr_risk_code;
I believe this could fit your needs.
SELECT
*
FROM CLAIMS_TB AS c
LEFT JOIN CLAIMS_RISK_TB cl ON c.cm_index = cl.cr_cm_index
LEFT JOIN VEHICLE_TB v ON cl.cr_risk_code = v.ai_risk_index
Finaly I find the solution, query below works:
select * from CLAIMS_TB c
JOIN CLAIMS_RISK_TB cr ON( C.CM_INDEX = cr.cr_cm_index)
LEFT OUTER JOIN VEHICLE_TB v ON (cr.cr_risk_code = v.ai_regn_no);
I have the following Linq statement:
(from order in Orders.AsEnumerable()
join component in Components.AsEnumerable()
on order.ORDER_ID equals component.ORDER_ID
join detail in Detailss.AsEnumerable()
on component.RESULT_ID equals detail.RESULT_ID
where orderRestrict.ORDER_MNEMONIC == "MyOrderText"
select new
{
Mnemonic = detail.TEST_MNEMONIC,
OrderID = component.ORDER_ID,
SeqNumber = component.SEQ_NUM
}).ToList()
I expect this to put out the following query:
select *
from Orders ord (NoLock)
join Component comp (NoLock)
on ord .ORDER_ID = comp.ORDER_ID
join Details detail (NoLock)
on comp.RESULT_TEST_NUM = detail .RESULT_TEST_NUM
where res.ORDER_MNEMONIC = 'MyOrderText'
but instead I get 3 seperate queries that select all rows from the tables. I am guessing that Linq is then filtering the values because I do get the correct values in the end.
The problem is that it takes WAY WAY too long because it is pulling down all the rows from all three tables.
Any ideas how I can fix that?
Remove the .AsEnumerable()s from the query as these are preventing the entire query being evaluated on the server.