I have now built up a gitlab server on my Ubuntu computer as your installation guide on www.gitlab.org official website tells.
Then I signed in the gitlab server homepage through IE browser in the client computer.
Subsequently I modified the "My Profile" and uploaded my SSH public key.
Logged out and reboot server, then login again.
Create my first git project : gitlab_testing.git
At that time when I did 'git clone' to download the gitlab_testing.git repository from server, or when I push the first commit upon to server, it always showed the below error message, please kindly see the below snapshots :
As mentioned here:
"Name or service not known" is a socket-level error which usually points to either an invalid IP address/DNS hostname, or an unregistered port name.
Check if this is a proxy issue (as in this question).
Either you need to configure a proxy, or make sure that you don't use a proxy when accessing a local gitlab server (using the no_proxy environment variable)
Related
I cannot access Gitlab from the browser.
I am getting the following message:
This site can’t be reached
gitlab.com took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_TIMED_OUT
I am not able to use git pull origin master and git push -u origin master from the terminal.
It is showing the following error message:
**fatal: unable to access "https://gitlab.com/myproject.git/" : OpenSSL SSL_connect: SS_ERROR_SYSCALL in connection to gitlab.com:443**
Help me to fix the isssue,
Thanks.
Check your DNS settings, can you reach other sites? This doesn't seem to be a gitlab specific problem.
Also, your remote URL seems quite weird. It's usually gitlab.com/user/repo.git
Try other sites, do they work?
Try acquiring the IP Address from gitlab using an online whois service. Does opening this IP work?
Adjust your origin:
git remote rm origin
git remote add origin "https://username#gitlab.com/username/password.git"
Try this and report back if something worked.
I have a repository on our internal servers. If i try to pull/clone an existing repository i'm getting this error message.
But if i type this repo-link to Chrome, i can see my repository without any problem. We use corporate proxies and i've configurem them in ENV-Variable on windows and git global settings.
Git global settings:
http.sslverify=false
user.name=My name
user.email=myname#domain.com
http.proxy=http://PROXY:8080/
https.proxy=http://PROXY:8080/
I should remove the proxy settings everywhere to connect my VPN. Because proxy server blocks my request because of non-existing server address.
Removing proxy for a local repository is also easy:
git config remote.origin.proxy ""
I have trouble getting the official Windows ADT 21.1.0 distribution to connect to a git repository. No matter what I tried(details below) it complains about host key not present in the registry and shows me no option to accept the host key. The remote server is running Gitlab and is under my control. There's no problem with connectivity or firewalls.
What I tried so far:
connecting without giving a password, with user git
connecting while giving a password, with another user
adding manually the host key in the known_hosts file that is found in the ssh home directory(Preferences->General->Network Connections->SSH2->SSH2 home).
The message is always:
The server's host key is not cached in the registry. You
have no guarantee that the server is the computer you
think it is.
The server's rsa2 key fingerprint is:
ssh-rsa 2048 xx:xx:xx...
Connection abandoned.
RSE works without any problems, only egit gives me problems.
You could workaround the problem by not using the ssh protocol with the git server, but instead the git or http protocol.
One reason for the above message can be using a folder called "ssh" instead of ".ssh" (note the dot). Some colleague of mine experienced that, and this can easily happen when using Windows explorer, as it will silently remove the dot, when creating a folder called ".ssh". You have to use the command line instead.
I'm facing some problems while git clone a repo from my ubuntu server running gitolite.
First, I got a public key from the developer who wants to clone the repository from the server. It was a rsa key created with putty. So I did the following to parse it from the putty-style to openssh format with:
ssh-keygen -i -f /tmp/ssh2/YourName.pub > /tmp/openssh/YourName.pub (taken from http://gitolite.googlecode.com/git/doc/ssh-troubleshooting.mkd?r=d3a663d03f1027f909732d55d0519bdd84edb62c)
and uploaded the public key along with a new entry for the repo and the new user in the config file to gitolite-admin repo.
So far, so good.
The developer is using **** along with putty to connect to the server, which is running git on a non-standard port and he keeps on getting the same error over and over again:
Cloning into 'D:\path\to\dirctory'...
error: Recv failure: Connection was reset while accessing http://sub.domain.com/info/refs
fatal: HTTP request failed
git did not exit cleanly (exit code 128)
Could anyone give me some advice about this issue?
EDIT:
In the meantime, we managed to git clone the repository by addressing it with the ssh:// protocol instead of git://, so it doesn't seem like it is a problem of the rsa_public.key or something like that.
The iptables on the server are accepting connections through the port for git, but it keeps on giving the above mentioned error.
The OP herom initially commented that the developer used git://git#remote.server.com:port/repo.git as an address.
I asked if there was any firewall issue, preventing the use of the git port (9418), but the OP mentioned:
no, there shouldn't be a firewall issue as iptables is accepting traffic for the git port - the port is forwarded and appears to be another port when connecting from outside...
Now, the developer cloned the repo through ssh:// (and even connecting to the ssh-port!)
I note that the git port can sometime be blocked, as illustrated in this thread.
If not on the client side, maybe on the server side.
I've just successfully built SparkleShare for windows according to guide:
https://github.com/wimh/SparkleShare/wiki
and exported my ssh public key to a server.
The problem is that I can't connect from a client behind a http_proxy to a public server with ssh running on a custom port. I had also problem with cloning any git server. I need to switch git:// protocol to http:// one. Any suggestion? Does anyone have similar experience?
This is a log file:
15:25:13 [SSH] ssh-agent started, PID=4380 Identity added:
C:\Users\MYUSER\AppData\Roaming\sparkleshare\sparkleshare.MYEMAIL.key
(C:\Users\sg0922706\AppData\Roaming\sparkleshare\sparkleshare.MYEMAIL.key)
15:25:34 [Fetcher][C:\Users\MYUSER\Documents\SparkleShare.tmp\share]
Fetchin g folder: ssh://MYGITUSER#MYHOST/MYPATH 15:25:34 [Fetcher]
Disabled host key checking MYHOST 15:25:34 [Cmd] git clone --progress
"ssh://MYGITUSER#MYHOST/MYPATH" "C:\Us
ers\MYUSER\Documents\SparkleShare.tmp\share" 15:25:37 [Git] Exit code
128 15:25:37 [Fetcher] Failed 15:25:37 [Fetcher] Enabled host key
checking for MYHOST
To get SparkleShare to use your proxy you will need to modify the config of the msysgit that is installed as part of SparkleShare. Navigate to C:\Program Files (x86)\SparkleShare\msysgit\etc and edit the gitconfig file in notepad and add the following line under the [http] tag
proxy = http://user:pass#proxyurl:port
modifying the url as required to match your settings. You can then use the "On my own server" option to add the http url of your repository.
I have a work around on this particular problem. I guess that you already successfully connected to your server via a simple SSH client (i.e. PuTTY)? With PuTTY you can easily configure an ssh connection via any kind of proxy (such as HTTP, SOCKS, Telnet, ..)
What you can do now is to specify a local "tunnel" (an SSH port forwarding rule) like this: L22 127.0.01:22 (see attachment). If you are using a ssh command line add the following option: -L 22:127.0.01:22.
So now as soon as your terminal is open and running you'll be able to reach your git server via the server url: ssh://git#127.0.0.1.
If your local port 22 is busy you can define the tunnet on a other port. i.e. if the 44 is not occupied: L44 127.0.0.1:22. The url to use in SparkleShare become ssh://git#127.0.0.1:44.
But it's a work around. I'm looking for a better solution.