This question already has an answer here:
How can I debug require in Ruby 1.9
(1 answer)
Closed 8 years ago.
I got interested in Rubygem, and started to explore how does it works, and found out that after 1.9, Rubygem's require became THE require.
With the code below:
require 'debugger'
debugger
require 'thor'
I started to n and l and s, but got stuck at:
# specification.rb:263
def self._all # :nodoc:
unless defined?(##all) && ##all then
specs = {}
self.dirs.each { |dir|
Dir[File.join(dir, "*.gemspec")].each { |path|
spec = Gem::Specification.load path.untaint
# #load returns nil if the spec is bad, so we just ignore
# it at this stage
specs[spec.full_name] ||= spec if spec
}
}
##all = specs.values
_resort!
end
##all
end
It seems that before stepping into the method above, ##all has already be been prepared. Then I set break-points everywhere ##all =, but none of the break-points are reached.
What am i missing???
EDIT:
Look at my question again. See require 'debugger'? I feel like a fool.
Now the question is "How can I debug require"?
CLOSED:
Plz see this great answer:https://stackoverflow.com/a/16069229/342366
Thx again for this greet answer:https://stackoverflow.com/a/16069229/342366, i did a little debugging myself.
For some one google to this question(and lazy to debug), i decide to post the answer to "How does Rubygem require all gems?"
There are the key-steps below:
load all ".gemspec" in "Ruby193\lib\ruby\gems\1.9.1\specifications"
Dir[File.join(dir, "*.gemspec")].each { |path|
spec = Gem::Specification.load path.untaint
# #load returns nil if the spec is bad, so we just ignore
# it at this stage
specs[spec.full_name] ||= spec if spec
}
sort the gems by version desc
##all.sort! { |a, b|
names = a.name <=> b.name
next names if names.nonzero?
b.version <=> a.version
}
got the first gem (the higher version)
self.find { |spec|
spec.contains_requirable_file? path
}
activate the gem and all dependencies~ Everyone's happy.
Related
So, I'm trying to build a quick console program for my development needs, akin to rails console (I'm using Sinatra + DataMapper + pry).
I run it and launch cat = Category.new(name: 'TestCat', type: :referential). It gives me the following error:
Error: Cannot open "/home/art-solopov/Projects/by-language/Ruby/billy-bones/=" for reading.
What could be the cause of the problem?
console:
#!/usr/bin/env ruby
$LOAD_PATH << 'lib'
require 'pry'
require 'config'
binding.pry
lib/config.rb:
# Configuration files and app-wide requires go here
require 'sinatra'
require 'data_mapper'
require 'model/bill'
require 'model/category'
configure :production do
DataMapper::Logger.new('db-log', :debug)
DataMapper.setup(:default,
'postgres://billy-bones:billy#localhost/billy-bones')
DataMapper.finalize
end
configure :development do
DataMapper::Logger.new($stderr, :debug)
DataMapper.setup(:default,
'postgres://billy-bones:billy#localhost/billy-bones-dev')
DataMapper.finalize
DataMapper.auto_upgrade!
end
configure :test do
require 'dm_migrations'
DataMapper::Logger.new($stderr, :debug)
DataMapper.setup(:default,
'postgres://billy-bones:billy#localhost/billy-bones-test')
DataMapper.finalize
DataMapper.auto_migrate!
end
lib/model/category.rb:
require 'data_mapper'
class Category
include DataMapper::Resource
property :id, Serial
property :name, String
property :type, Enum[:referential, :predefined, :computable]
has n, :bills
# has n, :tariffs TODO uncomment when tariff ready
def create_bill(params)
# A bill factory for current category type
case type
when :referential
ReferentialBill.new params
when :predefined
PredefinedBill.new params
when :computable
ComputableBill.new params
end
end
end
If I substitute pry with irb in the console script, it goes fine.
Thank you very much!
P. S.
Okay, yesterday I tried this script again, and it worked perfectly. I didn't change anything. I'm not sure whether I should remove the question now or not.
P. P. S.
Or actually not... Today I've encountered it again. Still completely oblivious to what could cause it.
** SOLVED **
DAMN YOU PRY!
Okay, so here's the difference.
When I tested it the second time, I actually entered a = Category.new(name: 'TestCat', type: :referential) and it worked. Looks like pry just thinks cat is a Unix command, not a valid variable name.
Not answer to the pry question I just generally hate case statements in ruby.
Why not change:
def create_bill(params)
# A bill factory for current category type
case type
when :referential
ReferentialBill.new params
when :predefined
PredefinedBill.new params
when :computable
ComputableBill.new params
end
end
to:
def create_bill(params)
# A bill factory for current category type
self.send("new_#{type}_bill",params)
end
def new_referential_bill(params)
ReferentialBill.new params
end
def new_predefined_bill(params)
PredefinedBill.new params
end
def new_computable_bill(params)
ComputableBill.new params
end
You could make this more dynamic but I think that would take away from readability in this case but if you'd like in rails this should do the trick
def create_bill(params)
if [:referential, :predefined, :computable].include?(type)
"#{type}_bill".classify.constantize.new(params)
else
#Some Kind of Handling for non Defined Bill Types
end
end
Or this will work inside or outside rails
def create_bill(params)
if [:referential, :predefined, :computable].include?(type)
Object.const_get("#{type.to_s.capitalize}Bill").new(params)
else
#Some Kind of Handling for non Defined Bill Types
end
end
I have three Ruby files in the same directory:
classthree.rb
otherclass.rb
samplecode.rb
Here are the contents of classthree.rb:
require './samplecode.rb'
require './otherclass.rb'
class ClassThree
def initialize()
puts "this class three here"
end
end
Here are the contents of samplecode.rb:
require './otherclass.rb'
require './classthree.rb'
class SampleCode
$smart = SampleCode.new
#sides = 3
##x = "333"
def ugly()
g = ClassThree.new
puts g
puts "monkey see"
end
def self.ugly()
s = SampleCode.new
s.ugly
puts s
puts $smart
puts "monkey see this self"
end
SampleCode.ugly
end
Here are the contents of otherclass.rb:
require './samplecode.rb'
require './classthree.rb'
END {
puts "ending"
}
BEGIN{
puts "beginning"
}
class OtherClass
def initialize()
s = SampleCode.new
s.ugly
end
end
My two questions are:
There has to be a better way than require './xyz.rb' for every class in the directory. Isn't there something like require './*.rb'?
When I run ruby otherclass.rb I get the following output:
Why do I get "beginning" and "ending" twice each??
At 1 - The best way to deal with it is to create another file. You can call it environment.rb or initialize.rb, and it would require all the needed files.
$LOAD_PATH.unshift File.dirname(__FILE__)
require 'samplecode.rb'
require 'classthree.rb'
require 'classthree.rb'
Now you only need to require this file once on the start of the application.
At 2 - You started from file 'otherclass.rb'. It displays the first 'beginning' bit and then it loads samplecode.rb file. At this point, 'otherclass.rb' has not been loaded yet - it was not required by any other file. hence samplecode.rb is rerunning whole otherclass.rb, which is being required there. Rerunning doesn't reload 'samplecode.rb' as it was already required (require checks first whether file was or was not required). That's why you're seeing those messages twice.
I'm trying to define a few let's and before hooks that will run globally for all my specs by including them in a separate file using the Rspec configuration block.
I tried something like:
module Helpers
def self.included(base)
base.let(:x){ "x" }
base.before(:all){ puts "x: #{x}" }
end
end
Rspec.configure{|c| c.include Helpers }
but this doesn't work as expected. The before(:all) doesn't just run before each main example group, but each nested one as well.
Then I found out about shared_context and it appears to be exactly what I want.
My open problem however is that I can't figure out how to share a context amongst ALL of my specs. The docs only reference include_context within a specific spec.
Can anyone tell me how I can achieve this behavior in a global manner? I'm aware that I can define global before hooks in my spec_helper but I can't seem to use let. I'd like a single place that I can define both of these things and not pollute my spec helper, but just include it instead.
I tried to reproduce your error, but failed.
# spec_helper.rb
require 'support/global_helpers'
RSpec.configure do |config|
config.include MyApp::GlobalHelpers
end
# support/global_helpers.rb
module MyApp
module GlobalHelpers
def self.included(base)
base.let(:beer) { :good }
base.before(:all) { #bottles = 10 }
end
end
end
# beer_spec.rb
require 'spec_helper'
describe "Brewery" do
it "makes good stuff" do
beer.should be :good
end
it "makes not too much bottles" do
#bottles.should == 10
end
context "when tasting beer" do
before(:all) do
#bottles -= 1
end
it "still produces good stuff" do
beer.should be :good
end
it "spends some beer on degusting" do
#bottles.should == 9
end
end
end
https://gist.github.com/2283634
When I wrote something like base.before(:all) { p 'global before'; #bottles = 10 }, I got exactly one line in spec output.
Notice that I didn't try to modify instance variables inside an example, because it wouldn't work anyway (well, actually you can modify instance variables, if it's a hash or array). Moreover, even if you change before(:all) in nested example group to before(:each), there will be still 9 bottles in each example.
I'm trying to use the google_search ruby library (code follows) but it complains that 'cattr_accessor is an undefined method' - any ideas why this might be or how I could fix it?
require 'rubygems'
require 'google_search'
GoogleSearch.web :q => "pink floyd"
cattr_accessor seems to be a Rails extension that acts like attr_accessor, but is accessible on both the class and its instances.
If you want to copy the source of the cattr_accessor method, check out this documentation:
# File vendor/rails/activesupport/lib/active_support/core_ext/class/attribute_accessors.rb, line 46
def cattr_accessor(*syms)
cattr_reader(*syms)
cattr_writer(*syms)
end
# File vendor/rails/activesupport/lib/active_support/core_ext/class/attribute_accessors.rb, line 4
def cattr_reader(*syms)
syms.flatten.each do |sym|
next if sym.is_a?(Hash)
class_eval("unless defined? ##\#{sym}\n##\#{sym} = nil\nend\n\ndef self.\#{sym}\n##\#{sym}\nend\n\ndef \#{sym}\n##\#{sym}\nend\n", __FILE__, __LINE__)
end
end
# File vendor/rails/activesupport/lib/active_support/core_ext/class/attribute_accessors.rb, line 24
def cattr_writer(*syms)
options = syms.extract_options!
syms.flatten.each do |sym|
class_eval("unless defined? ##\#{sym}\n##\#{sym} = nil\nend\n\ndef self.\#{sym}=(obj)\n##\#{sym} = obj\nend\n\n\#{\"\ndef \#{sym}=(obj)\n##\#{sym} = obj\nend\n\" unless options[:instance_writer] == false }\n", __FILE__, __LINE__)
end
end
You can get this functionality by including the Ruby Facets gem. Reference the source here:
https://github.com/rubyworks/facets/blob/master/lib/core/facets/cattr.rb
You generally don't need to require all code from the gem. You can selectively require what you want. There are quite a few useful extensions in the gem though.
I have a method that takes a block.
Obviously I don't know what is going to be passed in and for bizarre reasons that I won't go into here I want to print the contents of the block.
Is there a way to do this?
You can do this with Ruby2Ruby which implements a to_ruby method.
require 'rubygems'
require 'parse_tree'
require 'parse_tree_extensions'
require 'ruby2ruby'
def meth &block
puts block.to_ruby
end
meth { some code }
will output:
"proc { some(code) }"
I would also check out this awesome talk by Chris Wanstrath of Github http://goruco2008.confreaks.com/03_wanstrath.html He shows some interesting ruby2ruby and parsetree usage examples.
In Ruby 1.9+ (tested with 2.1.2), you can use https://github.com/banister/method_source
Print out the source via block#source:
#! /usr/bin/ruby
require 'rubygems'
require 'method_source'
def wait &block
puts "Running the following code: #{block.source}"
puts "Result: #{yield}"
puts "Done"
end
def run!
x = 6
wait { x == 5 }
wait { x == 6 }
end
run!
Note that in order for the source to be read you need to use a file and execute the file (testing it out from irb will result in the following error: MethodSource::SourceNotFoundError: Could not load source for : No such file or directory # rb_sysopen - (irb)
Building on Evangenieur's answer, here's Corban's answer if you had Ruby 1.9:
# Works with Ruby 1.9
require 'sourcify'
def meth &block
# Note it's to_source, not to_ruby
puts block.to_source
end
meth { some code }
My company uses this to display the Ruby code used to make carbon calculations... we used ParseTree with Ruby 1.8 and now sourcify with Ruby 1.9.
In Ruby 1.9, you can try this gem which extract the code from source file.
https://github.com/ngty/sourcify
In Ruby 2.5 the following works
puts block.source
In ruby 2.7, using the method_source gem (pry depends on it)
Set.instance_method(:merge).source.display
# =>
def merge(enum)
if enum.instance_of?(self.class)
#hash.update(enum.instance_variable_get(:#hash))
else
do_with_enum(enum) { |o| add(o) }
end
self
end
The repo says it works for procs, but I haven't tested it.