I am trying to build libjingle. I have completed steps mentioned in its README but still i am not getting the binaries.
The steps I followed are:
I used building using GYP
* installed depot-tools
* gclient config http://libjingle.googlecode.com/svn/trunk
* gclient sync
* gclient runhooks
* make
But as mentioned in the last part of README, i should get the binaries under talk/build/dbg/staging or talk/build/opt/staging.
But I am not getting anything in these paths.
Please help me.
Am I doing anything wrong?
Related
Below is a short list of my setup until I stumble upon the HH12 Hardhat Error that I keep getting:
mkdir wave (Name of my directory)
cd wave
npm init -y
npm install —save-dev hardhat
npx hardhat
Choose sample project
6a. Hardhat project root (Select)
6b. Add .gitignore
Say yes to everything
install the remaining dependencies: npm install --save-dev #nomiclabs/hardhat-waffle ethereum-waffle chai #nomiclabs/hardhat-ethers ethers
npx hardhat accounts (to see all the different accounts)...
...And then it fails here! An HH12 Hardhat Error Message: "Hardhat is not installed or installed globally. You tried to run Hardhat from a global installation or not installing it at all. This is not supported. Please install Hardhat locally using npm or Yarn, and try again." (https://hardhat.org/errors/) [BTW, these 2 lines are the ONLY docs on this error on Hardhat!].
Any suggestions?
I have tried the following possible 'fixes' to sidestep this error but to no avail:
Updating most current version of node
Restarting my PC (About 17 X now as of this writing)
Using GitBash (Instead of Powershell)
Asking mods in Hardhat Discord (None) and other Discords
Opening the Hardhat docs (And the Tutorials!!) for answers... None!
StackExchange - There's literally only 1 other person who ALSO had this problem here! But the answers here are not the solution. (Have DMd that person but no reply as of yet).
So can anyone out there help?
I believe I finally figured out the solution (at least what worked for me):
I dropped back 2 directory levels from where I was for my root project and started again there.
I updated my Node version to 16.
I really need some help with what seems to be the most basic task (setting up the expo/react-native project). I've installed the expo-cli (v3.11.7), react-native (v2.0.1), watchman (v4.9.0) and node (v12.14.1). I've followed the tutorial up until the point where I need to run expo start and I get the following error:
Your project is in SDK version >= 33.0.0, but the expo package version seems to be older.
Error: node_modules directory is missing. Please run npm install in your project directory.
Couldn't start project. Please fix the errors and restart the project.
Set EXPO_DEBUG=true in your env to view the stack trace.
I've then run npm install and tried again but the same error pops up. I've removed the node_modules folder and that didn't work either.
Update:
When I npm install this is the error I'm seeing:
npm WARN deprecated core-js#1.2.7: core-js#<3 is no longer maintained and not recommended for usage due to the number of issues. Please, upgrade your dependencies to the actual version of core-js#3.
npm ERR! code EPROTO
npm ERR! errno EPROTO
npm ERR! request to https://codeload.github.com/expo/react-native/tar.gz/sdk-36.0.0 failed, reason: write EPROTO 4521895360:error:14094410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:../deps/openssl/openssl/ssl/record/rec_layer_s3.c:1544:SSL alert number 40
I've installed yarn (v1.21.1) and tried installing using this with the same error:
warning expo > fbemitter > fbjs > core-js#1.2.7: core-js#<3 is no longer maintained and not recommended for usage due to the number of issues. Please, upgrade your dependencies to the actual version of core-js#3.
error An unexpected error occurred: "https://github.com/expo/react-native/archive/sdk-36.0.0.tar.gz: write EPROTO 4356277696:error:14094410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:../deps/openssl/openssl/ssl/record/rec_layer_s3.c:1544:SSL alert number 40
Can anyone advise?
I've managed to solve the problem. I was trying to install over my home network, which apparently has some proxy restrictions! No idea why.
Someone advised me to try again but connected to another network or my mobile hotspot. I tried this and it worked! Problem solved. So I guess for any others that may be experiencing the same problem, try connecting to another network and see if that helps.
If this fails, then I suppose looking at the proxy configuration and making changes there may help. But I wouldn't advise doing this unless you know exactly what you're doing.
I tried to use gotk3 for creating desktop application. I follow the instruction in gotk3 wiki and this installing-on-linux wiki to install it. But then I get this error while executing go get -v:
gcc errors for preamble:
In file included from ../../gotk3/gotk3/gdk/gdk_since_3_22.go:23:0:
./gdk_since_3_22.go.h:22:8: error: unknown type name 'GdkMonitor'
static GdkMonitor *
^
I've tried to delete the gotk3 directory, and then trying to go get -v again, but still, it didn't work.
I also checked the GTK version that installed in my Ubuntu 16.04 using apt-cache policy libgtk2.0-0 libgtk-3-0 | grep Installed. And it shows this:
Installed: 2.24.30-1ubuntu1.16.04.2
Installed: 3.18.9-1ubuntu3.3
What did I do wrong? Thanks
GdkMonitor was introduced in GTK+ 3.22. Your version is 3.18.
go get -tags gtk_3_18 github.com/gotk3/gotk3/gtk at the very beginning of building (see here NOTE section) should fix things
I am trying to install golang compiler in Solaris 11.3 but I am getting following error;
pkg install: The requested change to the system attempts to install multiple actions
for link 'usr/perl5/pod' with conflicting attributes:
1 package delivers 'link mediator=perl mediator-priority=vendor mediator-version=5.22 path=usr/perl5/pod target=5.22/lib/pod':
pkg://solaris/runtime/perl-522#5.22.1,5.12-5.12.0.0.0.122.0:20170510T193143Z
1 package delivers 'link path=usr/perl5/pod target=5.12/lib/pod':
pkg://solaris/runtime/perl-512#5.12.5,5.11-0.175.3.0.0.30.0:20150821T171525Z
These packages may not be installed together. Any non-conflicting set may
be, or the packages must be corrected before they can be installed.
The requested change to the system attempts to install multiple actions
for link 'usr/perl5/man' with conflicting attributes:
1 package delivers 'link mediator=perl mediator-priority=vendor mediator-version=5.22 path=usr/perl5/man target=5.22/man':
pkg://solaris/runtime/perl-522#5.22.1,5.12-5.12.0.0.0.122.0:20170510T193143Z
1 package delivers 'link path=usr/perl5/man target=5.12/man':
pkg://solaris/runtime/perl-512#5.12.5,5.11-0.175.3.0.0.30.0:20150821T171525Z
These packages may not be installed together. Any non-conflicting set may
be, or the packages must be corrected before they can be installed.
The requested change to the system attempts to install multiple actions
for link 'usr/perl5/bin' with conflicting attributes:
1 package delivers 'link mediator=perl mediator-priority=vendor mediator-version=5.22 path=usr/perl5/bin target=5.22/bin':
pkg://solaris/runtime/perl-522#5.22.1,5.12-5.12.0.0.0.122.0:20170510T193143Z
1 package delivers 'link path=usr/perl5/bin target=5.12/bin':
pkg://solaris/runtime/perl-512#5.12.5,5.11-0.175.3.0.0.30.0:20150821T171525Z
These packages may not be installed together. Any non-conflicting set may
be, or the packages must be corrected before they can be installed.
////////////////////////////////////////////////////////////////////////////
I installed Perl-5.22 then also it is giving the same error. After googling I found the following command to ignore runtime Perl-512.
pkg change-facet facet.version-lock.runtime/perl-512=false
but I still getting this error which I mentioned above.
Please help me to sort out this error.
thanks in advance...
if you are also getting the same error with installation of any package follow the given command:
pkg install --accept --licenses perl-512
pkg install --accept --licenses perl-522
pkg install golang-17
When I try to install Cocos2d-iphone 3.0.0 RC4, I got an error: (run without sudo)
Error -60005 occurred while executing script with privileges.
So, I try to show its package content and use terminal to do: cd ...Cocos2D Installer 3.0.0.app/Contents/MacOS
I try this command: (with sudo)
sudo ./Cocos2D\ Installer\ 3.0.0
It works but I got log with some errors:
[1m>>> Installing Cocos2D-v3.0.0 files (B[m
[1m>>> Installing Cocos2D-v3.0.0 templates (B[m
[4m[1mCocos2D Template Installer (Cocos2D-v3.0.0)(B[m
Error: [31m✖︎(B[m Script cannot be executed as root.
In order for it to work properly, please execute the script again without 'sudo'.
If you want to know more about how to use this script execute '/Users/viethung/Downloads/Cocos2D-v3.0.0/install.sh --help'.
[1m>>> Building/Installing Cocos2D-v3.0.0 documentation, this may take a minute.... (B[m
appledoc version: 2.2 (build 963)
Generation step 4/5 failed: GBDocSetInstallGenerator failed generating output, aborting!
Documentation set was installed, but couldn't reload documentation within Xcode.
Xcode got an error: No documentation set present at specified path.
[1m>>> Cocos2D-v3.0.0 installation complete! (B[m
Are there any way is better than this way?
I have same problem.
I think you installed old cocos2d-iphone and it caused this problem.
You should remove old cocos2d-iphone first. I removed:
~/Library/Developer/Xcode/cocos2d v3.x
And install again. It works for me.
Hope it works for you :)