Could someone give an overview or a summary of what the purpose of beans in a Spring framework context?
I understand the standard Java bean (no arg constructor, getters/setters, often serialized), but the Spring bean purpose seems to be different.
Is it a way of implementing the Singleton design pattern (one instance, for like factory classes) in a simple, reusable fashion?
I've mainly used Spring with annotations, but I feel I need to grasp this in order to understand Spring.
Thanks!
Beans are objects that form the backbone of the application.
A bean is simply an object that is instantiated, assembled and otherwise managed by a Spring IoC container; other than that, there is nothing special about a bean.It is in all other respects one of probably many objects in your application.
Spring beans are defined in a spring configuration file or by using annotations, instantiated by the Spring container, and then injected into your application.
Spring beans will not be singleton design pattern until you explicitly make them to be.The singleton design pattern and the spring scope 'singleton' are different things.You can define different bean scopes depending on your requirements.
The scopes could be :
singleton – Return a single bean instance per Spring IoC container
prototype – Return a new bean instance each time when requested
request – Return a single bean instance per HTTP request.
session – Return a single bean instance per HTTP session.
globalSession – Return a single bean instance per global HTTP
session.
The default scope is singleton.
I understand the standard Java bean (no arg constructor,
getters/setters, often serialized), but the Spring bean purpose seems
to be different.
You mean always serialized. Why do you think the purpose seems different?
In the end, you write classes. A lot of time these are POJOs, Plain Old Java Objects. Sometimes you implement an interface or extend a class, but its all just classes.
Beans are just classes. Don't overcomplicate it.
Now Spring might take your beans (classes) and manage them for you via any of a number of policies (prototype, singleton) but that doesn't change what a bean is, it speaks to how Spring manages the bean.
To understand best, you should get familiar with dependency injection. In a few words dependency injection allows you to use objects, or services without explicitly creating them (of course, it gives other benefits, but let's focus on the question). This is achieved by maintaining a dependency container that is - roughly said - a collection of beans.
A bean is a service/component you use in your application. Unlike the EJB, with Spring the bean is not constrained to constructor arguments or specific annotations (especially if you use xml contexts). You register a bean with a container (by defining a context), and when you require it, the container will provide you with an instance of that bean. In order to create the bean, the container examines its class and constructors, and uses any other registered beans within that context, to call the appropriate constructor or property setter.
You can configure a bean to be a singleton - this is not a singleton as in the design pattern term. Singleton beans are created once within the container, and the same instance is used whenever the bean is requested from that container. You can also use the prototype scope to force the container to create a new instance each time.
Related
I'm new to Spring and a little confused about how it works. I get that I can use the application context to instantiate beans and have them populated. However, is the idea that I should be able to just write Bean b = new Bean() and then have Spring to somehow automagically populate that Bean?
I'm experimenting with Spring in a web application, and as far as I can see I need to inject the ApplicationContext into, say, the servlets to be able to instantiate other beans (services, daos etc.) from there. It's a bit cumbersome, but probably works.
However, is Spring meant to be able to hook into any object instantiation which happens on classes defined as beans in applicationContext.xml?
Spring is an Inversion of Control container. A bean is an object whose life cycle is managed by Spring. If you want Spring to populate an object, it needs to go through Spring, ie. it needs to be bean.
is Spring meant to be able to hook into any object instantiation
which happens on classes defined as beans in applicationContext.xml?
Spring doesn't hook into anything. You configure your beans and the relationships between them with Spring and Spring handles creating the instances and linking them up.
For domain objects, Spring provides a solution via the #Configurable annotation: http://docs.spring.io/spring/docs/4.0.0.RELEASE/spring-framework-reference/htmlsingle/#aop-atconfigurable
It requires compile- or load-time-weaving and, thus, introduces some additional complexity but having the convenience of using the standard new Bean() syntax plus Spring's autowiring is worth it in my opinion.
Alternatively, you could define your domain objects as beans with prototype scope and use some factory to create them using the Spring ApplicationContext.getBean() method. With a scope of prototype a new instance will be returned every time and since you go through the ApplicationContext, Spring will do all the dependency injection magic as usual.
As for services and other beans with singleton scope, you would typically NOT retrieve them by first injecting the ApplicationContext and using it but instead you would inject them via either a constructor, setter or annotation-based strategy. The documentation covers that in detail: http://docs.spring.io/spring/docs/4.0.0.RELEASE/spring-framework-reference/htmlsingle/#beans-factory-collaborators
By default, the Bean created by Spring is singleton. They are thread-safe because they are stateless. When we want Spring to create a stateful Bean, we need to use prototype scope for the Bean definition. We need to take care of the thread-safe issues for them. All stateless Bean will be polluted when they are injected by the prototype bean. So, I just can not image where we can use the prototype scope. Can you give some typical scenario that we can / need to use prototype Spring Bean? Also how can we void the stateful pollution on other singleton beans?
There are many reasons to use prototype scope, e.g., any time you'd use "new" instead of using a singleton. A per-user bean, a per-request bean, a collection of unique beans, etc. After all, in any non-trivial application, don't you use non-singletons far more than singletons?
Singleton-scoped beans aren't thread-safe simply because they're singletons–they must be written to be thread-safe. They don't become thread-safe magically. A bean's scope is just that, its scope: it doesn't make the bean appropriate for the particular scope–that's up to the developer.
I perceive prototype scoped beans as an alternative to factory classes used to create objects. The difference is in case of prototype beans spring will save you some code for dependency injection and will also automatically proxy your objects for transactions etc. when appropriate.
I myself prefer the factory approach. One reasonable scenario for prototype scope I encountered was a stateful object, needed by different known beans and each required its own copy. A dedicated factory class would be redundant in this scenario since I did not need to create objects on the fly but only during other beans' instantiation.
I am trying to better understand Spring instantiation of beans. To illustrate my doubts, let's assume we have a Service class being wired in a Controller, here are the questions:
How will Spring manage the lifecycle
of the Controller? Will a new object
be created per request?
Once a Service is instantiaded and
wired to a Controller, will Spring
re-use that object reference to wire
it in to other beans?
Like Servlets, Controllers' lifecycle spans beyond requests. All of controllers in the application are instantiated only once when application is started; afterwards those objects are re-used to service all requests.
As Bozho pointed out, by default all beans are in singleton scope, therefore they will be re-used everywhere, unless specified otherwise.
The default scope is singleton, which means beans will be re-used (i.e. 1) no, a new object will not be created per request, and 2) yes, the object reference will be reused).
This can all be configured. Have a look at http://static.springsource.org/spring/docs/3.0.x/spring-framework-reference/html/beans.html#beans-factory-scopes.
It all depends on the bean scope. By default all beans are in singleton scope - that is, they are instantiated by the container only once.
If you specify #Scope("request") (or the xml equivalent) then the same service object (singleton) will be injected in all instances of the request-scoped controller. (But you rarely need request-scoped controllers)
I have a service in my application which is a singleton.
My application is being bloated with the use of spring framework.
I am confused over to use the singleton service as
1: Plain Old Singleton [Access them statically when required]
OR as a
2: Spring singleton bean. [Use DI to inject when required]
Which approach is correct ?
The Spring singleton scope is not the same as the Singleton design pattern, which is not the same as a class with static methods.
From the documentation
"Please be aware that Spring's concept of a singleton bean is quite different from the Singleton pattern as defined in the seminal Gang of Four (GoF) patterns book. The GoF Singleton hardcodes the scope of an object such that one and only one instance of a particular class will ever be created per ClassLoader. The scope of the Spring singleton is best described as per container and per bean. This means that if you define one bean for a particular class in a single Spring container, then the Spring container will create one and only one instance of the class defined by that bean definition."
Also, note you need to be very careful using a Spring singleton as a service that web requests will utilize. Since each request is on its own thread, you can have threading issues if your singleton maintains any state.
To answer your question: Create a class that implements an interface, and use Spring to DI it appropriately. If your service does not maintain state, you can scope it to singleton, otherwise you can scope it to prototype.
I use Spring's beans whenever possible. The framework was designed to manage these things, and it is probably better than me at it. Another reason to use Spring's dependency injection is the possibility to unit-test with mocks instead of the real utility code, thus focusing the unit-test to the exact scope.
EDIT:
To answer the question in the comment, the only case I can think of for a non-bean singleton would be a utility code class, which would contain short pieces of generally reusable code in public static methods. Anything else requires instantiation, and therefore - a bean.
can the object created in IOC container can be called Singleton if yes why if no why?
Can anybody explain me in detail in simple words how IOC conatiner exactly manages the objects..
You can say that a spring singleton is not a singleton.
Singleton has its meaningful scope, the spring singleton scope is the spring ioc container. And the classic singleton's meaningful scope is the ClassLoader. You may find more about the distinction between these kinds of singleton here: A spring singleton is not a singleton.
Spring manage its singleton in a hashmap(Singleton Cache). When you get a bean from the spring ioc container, it first checks if the bean has already exists in the singleton cache, if does, it returns the bean from the singleton cache
Spring (and other ioc-containers) offer different scopes. One of the scopes is singleton - i.e. the container instantiates the object only once and gives / injects only one instance. Singleton is the default scope, so most of the beans are indeed singletons from the point of view of the container- i.e. they have only one instance in it.
However, there are other scopes, like prototype or the web-based request and session.
In managing the bean, the container does the following:
invokes the #PostConstruct and #PreDestroy methods (or the init and destroy methods, configured by any available means)
injects all their defined dependencies (=sets other beans existing in the container to the fields of this bean)
creates AOP aspects around the bean methods
Note: you can instantiate more than one objects of a class that is defined as as singleton bean. The container instantiates the object only once, but your code is not limited to instantiating it multiple times.
can the object created in IOC
container can be called Singleton if
yes why if no why?
Read this, from the Spring Reference.
Can anybody explain me in detail in
simple words how IOC conatiner exactly
manages the objects..
Read this, from the Spring Reference.
I use a more generic definition of a Singleton:
A Singleton is an object that is
guaranteed to be unique inside a given
scope.
This scope is the ClassLoader in the traditional singleton definition, but other possible scopes are:
Application (may be clustered and therefor classic Singleton won't help)
HTTP Session
Thread (implemented through ThreadLocals)
HTTP Request etc.
(I really like the Seam method Component.getInstance(Class, ScopeType) that lets you choose the Scope you want a singleton for.)
You might find this Google Groups thread useful.