i have download kompozer and installed by following step:
~> sudo yum install compat-libstdc++-33
~> sudo cp ~/Download/kompozer-077-i686.tgz /usr/local/src/kompozer/
~> cd /usr/local/src/kompozer
~> sudo tar vfzx kompozer-077-i686.tgz
~> sudo rm kompozer-077-i686.tgx
~> sudo mv kompozer kompozer-077
~> sudo ln -s /usr/local/src/kompozer/kompozer-077/kompozer /usr/local/bin/.
~> source ~/.tcshrc
on running this command
~> kompozer &
i application doesn't start and got an error on terminal :
[root#HyperWorkstation kompozer]# /usr/local/src/kompozer/kompozer-077/run-mozilla.sh:
/usr/local/src/kompozer/kompozer-077/kompozer-bin: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
please help what goes wrong actually i feel bad may happened in .tcshrc file
........... thanx for reply in advance
# yum install ld-linux.so.2
or
$ tar xvzf kompozer-0.8b3.es-ES.gcc4.2-i686.tar.gz
$ cd kompozer
$ ./kompozer-bin
Related
I'm trying to install Ruby 2.6.1 on Ubuntu but keep coming across this error.
Have tried uninstalling Ubuntu, googling the problem, running in administrator mode, downloading a different version.
This is the error:
:~$ rvm install 2.6.1
Searching for binary rubies, this might take some time.
Found remote file https://rvm_io.global.ssl.fastly.net/binaries/ubuntu/20.04/x86_64/ruby-2.6.1.tar.bz2
Checking requirements for ubuntu.
Installing requirements for ubuntu.
mkdir: cannot create directory ‘/usr/share/rvm/log/1625135668_ruby-2.6.1’: Permission denied
tee: /usr/share/rvm/log/1625135668_ruby-2.6.1/update_system.log: No such file or directory
Updating system..jaydene password required for 'apt-get --quiet --yes update':
Sorry, try again.
jaydene password required for 'apt-get --quiet --yes update':
..
Error running 'requirements_debian_update_system ruby-2.6.1',
please read /usr/share/rvm/log/1625135668_ruby-2.6.1/update_system.log
Requirements installation failed with status: 1.
:~$
you can use a gorails website to checkout ruby on rails installation. And ruby installs version as per dependencies on your system. If it's not founding 2.6.1 it will install next supported version for ex. 2.6.7.
check this website: https://gorails.com/setup/ubuntu/21.04
Check this: How do I install Ruby 1.9.3 on Ubuntu without RVM? but SO says to avoid link answers so here is the script:
#!/usr/bin/env bash
# -- this really is the only solution that worked for me on snap :/
ruby -v
if ! command -v ruby &> /dev/null
then
echo "Going to try to install ruby (ideally 3.1.2)"
# - install rebenv (following ruby-build really is needed eventhough it doesn't look like it)
mkdir -p ~/.rbenv
cd ~/.rbenv
git clone https://github.com/rbenv/rbenv.git .
# if $HOME/.rbenv/bin not in path append it, otherwise don't change it
echo $PATH | tr ':' '\n' | awk '{print " " $0}';
if [[ ":$PATH:" != *":$HOME/.rbenv/bin:"* ]]; then
echo "might want to put $HOME/.rbenv/bin in your path"
export PATH="$HOME/.rbenv/bin:$PATH"
# echo 'export PATH="$HOME/.rbenv/bin:$PATH"' >> ~/.bashrc.lfs
fi
eval "$(rbenv init -)"
rbenv -v
# - install ruby-build, odd, this really is needed for ruby to install despite it not looking like ruby build is need at the bottom
mkdir -p ~/.ruby-build
cd ~/.ruby-build
git clone https://github.com/rbenv/ruby-build.git .
# if $HOME/.ruby-build/bin not in path append it, otherwise don't change it
echo $PATH | tr ':' '\n' | awk '{print " " $0}';
if [[ $PATH != *"$HOME/.ruby-build/bin"* ]]; then
echo "might want to put $HOME/.ruby-build/bin in your path"
export PATH="$HOME/.ruby-build/bin:$PATH"
# echo 'export PATH="$HOME/.ruby-build/bin:$PATH"' >> ~/.bashrc.lfs
fi
ruby-build --version
# - install ruby without sudo -- using rbenv
mkdir -p ~/.local
# ruby-build 3.1.2 ~/.local/
rbenv install 3.1.2
rbenv global 3.1.2
fi
ruby -v
# - Original Prover doesn't work on SNAP
# Proverbot's way to install ruby
# # First, install Ruby, as that is for some reason required to build the "system" project
# git clone https://github.com/rbenv/ruby-build.git ~/ruby-build
# mkdir -p ~/.local
# PREFIX=~/.local ./ruby-build/install.sh
# ~/.local/ruby-build 3.1.2 ~/.local/
# ref: https://superuser.com/questions/340490/how-to-install-and-use-different-versions-of-ruby/1756372#1756372
I need a specific version of protocol buffer which is 3.14.0 on apt its not available like this
sudo apt install -y protobuf-compiler = 3.14.0
and If I follow these steps by binary :
$ PB_REL="https://github.com/protocolbuffers/protobuf/releases"
$ curl -LO $PB_REL/download/v3.14.0/protoc-3.14.0-linux-x86_64.zip
then
unzip protoc-3.14.0-linux-x86_64.zip -d $HOME/.local
then
$ export PATH="$PATH:$HOME/.local/bin"
from this source
and it's not getting install when I do protoc --version I am getting this error
bash: /usr/bin/protoc: No such file or directory
I think Because /usr/bin/protoc doesn't exist. When you unzipped you got folder named protoc-3.14.0.
which is /usr/bin/protoc-3.14.0
try doing this
PROTOC_ZIP=protoc-3.14.0-linux-x86_64.zip
curl -OL https://github.com/protocolbuffers/protobuf/releases/download/v3.14.0/$PROTOC_ZIP
sudo unzip -o $PROTOC_ZIP -d /usr/local bin/protoc
ref: http://google.github.io/proto-lens/installing-protoc.html
Please check out the following steps to Install protoc on Ubundu, Run the commands 1 to 4 on terminal. Then 5 and 6 to finalize the settings.
Get the latest version tag of protoc release and assign it to variable:
1.
PROTOC_VERSION=$(curl -s "https://api.github.com/repos/protocolbuffers/protobuf/releases/latest" | grep -Po '"tag_name": "v\K[0-9.]+')
curl -Lo protoc.zip "https://github.com/protocolbuffers/protobuf/releases/latest/download/protoc-${PROTOC_VERSION}-linux-x86_64.zip"
Run the following command to extract executable file from a ZIP archive:
sudo unzip -q protoc.zip bin/protoc -d /usr/local
Set execute permission:
sudo chmod a+x /usr/local/bin/protoc
Now protoc command is available for all users as a system-wide command.
We can now check protoc version:
protoc --version
Remove unnecessary ZIP archive:
rm -rf protoc.zip
I am facing some issues while installing go lang, have used below approach to install it.
sudo apt update
$ sudo curl -O https://storage.googleapis.com/golang/go1.10.1.linux-amd64.tar.gz
$ sudo tar -xvf go1.10.1.linux-amd64.tar.gz
$ sudo mv go /usr/local
everything went fine till the above step.
But when I am giving below command, I am getting a message
$ echo 'export PATH=$PATH:/usr/local/go/bin' >> ~/.profile
Message: bash: export: '/usr/local/go/bin': not a valid identifier
$ source ~/.profile
Try this script:
git clone https://github.com/udhos/update-golang
cd update-golang
sudo ./update-golang.sh
Full details: https://github.com/udhos/update-golang
How can I get 9.20 - the current version?
(I'm doing the research and will answer as I finish.)
This answer is an update to the now stale answer here, with a few extra details and a reference to the current repo location.
This may be obvious to the more experienced, but this is intended to help those less experienced with CLI/make/gcc who just need gs.
First set up gcc-c++ if you haven't already [Are all packages necessary? Last two seem to be not needed.]:
sudo yum install -y gcc gcc-c++ compat-gcc-32 compat-gcc-32-c++
Then download, make and install ghostscript:
wget https://github.com/ArtifexSoftware/ghostpdl-downloads/releases/download/gs920/ghostscript-9.20.tar.gz
tar -zxvf ghostscript-9.20.tar.gz
cd ghostscript-9.20
./configure --prefix=/usr --enable-dynamic --disable-compile-inits --with-system-libtiff
make
make so
sudo make install
sudo chmod go+w /usr/include/ghostscript/
sudo make soinstall && install -v -m644 base/*.h /usr/include/ghostscript && sudo ln -v -s ghostscript /usr/include/ps
sudo ln -sfv ../ghostscript/9.20/doc /usr/share/doc/ghostscript-9.20
cd ..
wget http://sourceforge.net/projects/gs-fonts/files/latest/download?source=files --output-document=ghostscript-fonts-std-8.11.tar.gz
sudo tar -xvf ghostscript-fonts-std-8.11.tar.gz -C /usr/share/ghostscript
fc-cache -v /usr/share/ghostscript/fonts/
sudo mkdir /usr/include/ghostscript/
sudo chmod go-w /usr/include/ghostscript/
ghostscript -v
gs -v
You could put the source code on the instance and compile it.....
Met an error when ran
sudo chmod go+w /usr/include/ghostscript/
because the folder didn't exist yet.
So I did minor adjustment to the command order:
wget https://github.com/ArtifexSoftware/ghostpdl-downloads/releases/download/gs920/ghostscript-9.20.tar.gz
tar -zxvf ghostscript-9.20.tar.gz
cd ghostscript-9.20
./configure --prefix=/usr --enable-dynamic --disable-compile-inits --with-system-libtiff
make
make so
sudo make install
sudo mkdir /usr/include/ghostscript/
sudo chmod go+w /usr/include/ghostscript/
sudo make soinstall && install -v -m644 base/*.h /usr/include/ghostscript && sudo ln -v -s ghostscript /usr/include/ps
sudo ln -sfv ../ghostscript/9.20/doc /usr/share/doc/ghostscript-9.20
cd ..
wget http://sourceforge.net/projects/gs-fonts/files/latest/download?source=files --output-document=ghostscript-fonts-std-8.11.tar.gz
sudo tar -xvf ghostscript-fonts-std-8.11.tar.gz -C /usr/share/ghostscript
fc-cache -v /usr/share/ghostscript/fonts/
sudo chmod go-w /usr/include/ghostscript/
ghostscript -v
gs -v
I followed the instructions from the RVM homepage (https://rvm.beginrescueend.com/rvm/install/)
I typed the following:
sudo bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer )
the script executed and didn't seem to give any errors.
the same without sudo gave an error:
Warning: Failed to create the file
Warning: /usr/share/ruby-rvm/archives/wayneeseguin-rvm-stable.tgz: Permission
Warning: denied
0 792k 0 3908 0 0 2257 0 0:05:59 0:00:01 0:05:58 2257
curl: (23) Failed writing body (0 != 3908)
Could not download 'https://github.com/wayneeseguin/rvm/tarball/stable'.
curl returned status '23'.
I also put this in my ~/.bashrc
echo '[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm"
what I get is:
~$ type rvm | head -1
bash: type: rvm: not found
~$ source "/usr/local/rvm/scripts/rvm"
bash: /usr/local/rvm/scripts/rvm: No such file or directory
~$ source "$HOME/.rvm/scripts/rvm"
bash: /home/anonym/.rvm/scripts/rvm: No such file or directory
How can this be fixed?
PS
I'm using Ubuntu 11.10
Sudo problems. This worked for me to install rvm. Just do:
curl -L https://get.rvm.io | sudo bash -s stable --ruby
nano ~/.bashrc
at the bottom of the file add these line
unset rvm_path
unset GEM_HOME
Then run
curl -L https://get.rvm.io | bash -s stable
source ~/.rvm/scripts/rvm
echo "source ~/.rvm/scripts/rvm" >> ~/.bashrc
rvm install 2.1.3
rvm use 2.1.3 --default
ruby -v
Can you try this:
$ curl -s raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer | bash -s stable
or
$ curl -s raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer | sudo bash -s stable
depending on your permissions. That should help. It helped me! :)
I'm sure there's a more elegant way to fix this, but I ran into the same issue and was kinda in a hurry, so I went for a quick and dirty workaround:
$ curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer > foo.sh
$ chmod 755 foo.sh
Then edit line 162, and add -k to the curl command:
$ vim foo.sh
162 if curl -Lk https://github.com/${_repo}/rvm/tarball/${_branch} -o ${rvm_archives_path}/${_repo}-rvm-${_branch}.tgz
Then run the script:
$ ./foo.sh --branch stable
Like I said, not ideal, but it got me where I needed to be quickly.
If anyone has this problem in the future in ubuntu I was getting this error because of an old package that still had config stuff hanging around.
Try running
sudo apt-get --purge remove ruby-rvm
That should take care of the permission error and let you install RVM as a normal user under $HOME/.rvm
Put this in your .bashrc instead (without echo)
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"
And restart your terminal.
You might have RVM installed under the wrong user. RVM won't let you install if it's installed under another user.
You can uninstall it from the other user with rvm implode.
Log over to the other user and RVM will install correctly!
https://rvm.io/rvm/security#ipv6-issues
You can forbid gpg's internal dirmngr from using IPv6 by add the following line to ~/.gnupg/dirmngr.conf: