I have setup the ftp server locally,I created authenticated users to access the ftp server.
I want to give privileges such as delete,write,read to the users.
I followed lot of tutorials, but still couldn't log in to the ftp server.
Here's below changes I have done
remove comment in following lines in /etc/vsftpd.conf
local_enable=YES
write_enable=YES
chroot_list_enable=YES
added users to /etc/vsftp.chroot_list file
then
sudo touch /etc/vsftp.chroot_list
finally restarted the server, but I can't login to the ftp server.
First of all check port 21 is listening with below command. If you have customized port then replace 21 with that port number.
netstat -pan | grep 21
If it is listening then check if you can ftp locally:
ftp localhost
and then stop firewall for some time from your server and then try again.
Related
I'm getting the following error when I try to connect to my FTP account in Filezilla using the given cPanel FTP configuration. I've gone ahead and double checked it and tried entering it manually but I continue to get the same error.
Connection attempt failed with "EAI_NONAME - Neither nodename nor servname provided, or not known".
Everything I find tells me that something may be wrong in how I'm entering something but I'm sure that I am not. I'm unable to figure out this and I've worked with Filezilla and connecting to many other FTP accounts using the FTP configs in cPanel successfully.
Example FTP settings:
Host: ftp.address.com
Protocol: FTP
Encryption: Use explicit FTP over TLS if available
Logon Type: Normal
User: user#address.com
Password: ************
I've triple-checked the password and tried resetting it a few times in the cPanel.
I've tried removing the ftp. part in front of the host name to someone elses suggestions but I then get the following error:
Connection attempt failed with "ECONNREFUSED - Connection refused by server".
I'm at a lost and I can't figure out how to connect to my site. Any help is appreciated. Thanks.
Please check if your FTP server is actually working or listening. Connection refused by the server means that FTP server is not up and running. You can try to do a telnet ftp-server-ip-address 21 and see if you are able to connect or not.
Issue via ssh:
systemctl restart pure-ftpd and then systemctl status pure-ftpd to see if your ftp server is actually started. Additionally you can issue:
nestat -tunlp and check the list to see if you see the ftp service listening to the port 21. You should see an entry like this one:
tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 8788/pure-ftpd (SER
You can restart the ftp server from WHM as well
for connecting to Cpanel through filezilla ftp client, i think this is how you should set the required things:
host: address.com
(no need to add ftp in the beginning)
User: user#address.com
Password: ************
Note that this user should be active in FTP Account.
I am building simple webpage.
I could run on my local host.
I made ec2 instance, I opened ports 22, 8000.
I could connect with ssh and run server for webpage,
but I get this error
this is my github address that contain the code.
enter link description herehttps://github.com/MoreNiceJay/django2
In your security group rules, open port 80
This is the standard port for http traffic
Other things to check: login to the host with ssh and use netstat |grep LISTEN to see if there is a process listening on port 80
I have created a LAMP Bitnami VM on Google Cloud Platform Compute Engine.
vsftpd is installed already and I have edited the options to include:
listen=YES
listen_address=0.0.0.0
write_enable=YES
local_enable=YES
anonymous_enable=NO
local_umask=022
userlist_enable=YES
userlist_deny=NO
userlist_file=/etc/vsftpd.allowed_users
I have the PHP server up and running on http://my-ip-address but when I try to navigate to ftp://my-ip-address the browser just hangs.
I haven't used ftp for about 100 years so I'm not sure if I'm going about this the right way.
Do I need to do something with the firewall? I tried to do that but GCP wouldn't accept ftp as a protocol.
I've also tried with Filezilla but I get 'connection timed out'.
What am I missing please?
Make sure you have GCP firewall rule (ingress) in place to allow tcp:21 for FTP traffic to reach to the instance.
You can install tcpdump package on the server to monitor the traffic for verification.
To monitor the traffic on port 21 (ftp) can use the following syntax:
sudo tcpdump -i interface port 21
Example: sudo tcpdump -i eth0 port 21
I verified this on the GCE LAMP Bitnami VM with vsftpd package installed and was able to ftp from browser.
Moreover, FTP is an insecure protocol. You can set-up SFTP for more security and encrypted traffic.
Yes you missing Google Cloud Firewall, You have open some ports to make a successful connection with your ftp server. Go and visit this Set up an FTP Server on Google Cloud Platform -siteyaar.com blog post, This will help you.
First add this line in vsftpd.conf file.
pasv_min_port=40000
pasv_max_port=50000
After that open this ports 20,21,990,40000-50000 from Google cloud Firewall.
I have installed wakanda server on an Amazon EC2 server running ubuntu by following this utube video: https://www.youtube.com/watch?v=uSQODnB7wRU .
Now the video is for an older version but I have followed along successfully until I actually launch wakanda on the server. This is what I get in the console:
Welcome to Wakanda Server 10 build 10.187175
Publishing "DefaultSolution" solution
The solution's log file will be stored in the "/home/ubuntu/.Wakanda Server/UserCache/Wakanda Server/DefaultSolution-1882/Logs/" folder
The Administration Web Server cannot listen for connections on port 8080 or secure port 4433 on all IP addresses
You can customize the Administration Web Server's ports with the "--admin-port" and "--admin-ssl-port" options
, then when I try to log into it via the browser it says the connection dropped! Any help would be much appreciated, it seams I need to restrict the IP addresses which can access, but how?
Your wakanda server tried and failed to listen on 8080 and/or 4433
Check the following things:
Are the ports 8080 and/or 4433 used by other processes? (sudo netstat -tapen | grep :8080, if a result is found, then yes another process uses 8080. Check 4433 also)
You may found that wakanda server is already running as a service:
yes you should use this service (create and edit /etc/default/wakanda, add WAKANDA_SOLUTION_AT_STARTUP=your_path and restart with sudo /etc/init.d/wakanda restart)
or to continue starting it manually, stop the service first (sudo /etc/init.d/wakanda stop)
Has the current user the right to listen on those ports? (try running the server with sudo just to check, then use authbind or equivalent)
Can you use alternative ports? (use --admin-port and --admin-ssl-port wakanda server options)
wakanda-server --help will give you the list of options available, especially --solution=VALUE to provide the path to your solution.
I am using netcat to send file over my campus network.
I have used
c:\nc -w200 10.x.x.x 9638 < file.txt
on my client machine and
c:\nc -v -L -p 9638 >> nc.out
on my computer that is working as a server to receive files.
It worked completely fine when i tested it using localhost hence sending and receiving files on my system only.I am using the netcat version without the GAPING_SECURITY_HOLE downloaded from http://www.rodneybeede.com/Compile_Netcat_on_Windows_using_MinGW.html.
Our systems are connected to the net using proxy servers. Could they be interfering? Also pinging computers is disabled.
I am working on windows for now.
Yes proxy and router may interfere.
Try to see if you can telnet to that port
telnet <ip> port
That will tell you if you can access that machine on that port