I'm learning Ruby from Michael Hartl's tutorial. I'm following the steps one by one, but I can't get passed this one. After installing RVM, the instructions are:
rvm get head && rvm reload
rvm install 1.9.3
I can do the first line in the terminal, but when I do the 2nd I get the following error message:
"Error running 'requirements_osx_brew_libs_install autoconf automake libtool pkg-config apple-gcc42 libyaml readline libxml2 libxslt libksba openssl',
please read /Users/sg/.rvm/log/ruby-1.9.3-p429/1370816489_package_install_autoconf_automake_libtool_pkg-config_apple-gcc42_libyaml_readline_libxml2_libxslt_libksba_openssl.log"
What can I do to fix this error? I'm using OS X Mountain Lion on a Retina MacBook Pro if that makes a difference.
run
rvm requirements
See if you have installed everything that is required
Related
I have Homebrew installed, I'm trying to install RVM with:
rvm install 1.9.3-head
and I get this error:
Installing required packages:gcc46
Error running 'requirements_osx_brew_libs_install gcc46',
please read /Users/mike/.rvm/log/1384918134_ruby-1.9.3-head/package_install_gcc46.log
Requirements installation failed with status: 1
brew doctor says I'm ready to brew.
In the log I see:
Error: Download failed: ftp://gcc.gnu.org/pub/gcc/infrastructure/gmp-4.3.2.tar.bz2
Ruby 1.9.3+ supports compiling with Clang (which you do have) instead of GCC, so make RVM compile with Clang instead:
rvm install 1.9.3 --with-gcc=clang
When I upgraded to mavericks from mountain lion it somehow started ignoring my dev-tools (like gcc, etc.) try
xcode-select --install
also see here
When upgraded to OSX 10.12 and installing ruby 2.3.1 these steps fixed the issue.
brew install homebrew/versions/gcc46
if there are any linking issues related to any lib please follow the instructions for example
brew link --overwrite libtool
brew link --overwrite libgpg-error
Once the installation of gcc46 is successful you could
rvm install 2.3.1
I have OS X Mavericks installed and I'm trying to run rvm requirements in terminal and it gives me this error.
Installing required packages: autoconf, automake, libtool, pkgconfig, libyaml, libffi, readline, libksba, curl-ca-bundle, gdbm.............
Error running 'requirements_osx_port_libs_install autoconf automake libtool pkgconfig libyaml libffi readline libksba curl-ca-bundle gdbm',
please read /Users/Alex/.rvm/log/ruby-1.9.3-p448/1374263757_package_install_autoconf_automake_libtool_pkgconfig_libyaml_libffi_readline_libksba_curl-ca-bundle_gdbm.log
Requirements installation failed with status: 1.
It looks like RVM tried to install some dependencies using Macports and Macports proceeded to get really confused about dependencies when it tried to install autoconf.
Try running:
brew install autoconf
Otherwise you should run this bash script:
https://gist.github.com/siraj/1399288
Assuming you have brew, which you should if you don't.
If your Macports just isn't working, then you can manually install all of the requirements like this:
brew install autoconf automake libtool pkgconfig libyaml libffi readline libksba curl-ca-bundle gdbm
I tried the above, and a few other things. None worked.
It seems that on OSX 10.9 and XCode5 moved some libs around on us. So I had to install XCode5-DP6 (Dev Preview 6), opened up DP6 and in the settings, you have to tell the command line tools to use the new DP6 build and not the Standard XCode from the marketplace.
First, I had to install homebrew. Nothing liked to play with macports. I am on my first mac as of only a month ago, so macports was just what solved apache for me at the time. I then had to run 'brew install autoconf'
Once I did that I then ran rvm requirements, everything installed without issue. then sudo gem install jekyll from there and it all works like a charm now.
I'm sure once Mavericks is actually released this will get ironed out. We are using early releases after all...
Hope this works for you guys.
I have been trying to get Ruby to run on my Mac for a few days and whatever I do does not seem to be successful. I have installed MacPorts and followed the post here: Installing Ruby on Mac OS X 10.8.2
I ran the following commands:
sudo port selfupdate
sudo port install apple-gcc42
They completed sucessfully then I ran the line below:
CC=/opt/local/bin/gcc-apple-4.2 rvm install ruby-1.9.3-p194 --enable-shared --without-tk --without-tcl
After I run that line it takes a couple minutes and I get the following:
enter code here MacPorts base is already the latest version
DEBUG: Setting MacPorts sources ownership to root
The ports tree has been updated. To upgrade your installed ports, you should run
port upgrade outdated
i686-apple-darwin12-gcc-apple-4.2.1: no input files
Missing required packages: autoconf, automake, libtool, pkgconfig, libiconv, libyaml, readline, libxml2, libxslt, libksba, openssl, curl-ca-bundle, sqlite3, zlib, ncurses, gdbm.
Cowardly refusing to continue, please read 'rvm autolibs'.
There were package installation errors, make sure to read the log.
Do I need to install the missing packages that it references? If so, how do I do this? I'm not very familiar with MacPorts and would appreciate the help to get this working.
Since I originally I went to install RVM through https://rvm.io/rvm/install/ I followed the first command to RVM with ruby:
$ \curl -#L https://get.rvm.io | bash -s stable --autolibs=3 --ruby
After I ran the command it downloaded and compiled then when it went to install rubygems-2.0.3 for ruby-2.0.0-p0 it gave the following error message:
Error running 'env GEM_PATH=/usr/local/rvm/gems/ruby-2.0.0-p0:/usr/local/rvm/gems/ruby-2.0.0-p0#global:/usr/local/rvm/gems/ruby-2.0.0-p0:/usr/local/rvm/gems/ruby-2.0.0-p0#global GEM_HOME=/usr/local/rvm/gems/ruby-2.0.0-p0 /usr/local/rvm/rubies/ruby-2.0.0-p0/bin/ruby -d /usr/local/rvm/src/rubygems-2.0.3/setup.rb --verbose',
please read /usr/local/rvm/log/ruby-2.0.0-p0/rubygems.install.log
I then went to open the log file and at the bottom it says
ERROR: While executing gem ... (NoMethodError) undefined method fu_stream_blksize for #<Gem::Commands::SetupCommand:0x007fa09b05d7a8>
Installing RubyGems
Installing gem executable
Any ideas what I can do next?
Thanks in advance.
I had similar problems with OS X 10.8.3 and XCode 4.6.1. After some googling, I tried the install with a similar RVM command, except using the XCode version of clang (which symlinks to /usr/bin/cc). Try this:
\curl -#L https://get.rvm.io | bash -s stable #just get rvm
source ~/.rvm/scripts/rvm
rvm get head # update to latest rvm
CC=/usr/bin/cc rvm install ruby
It should have the same failure installing rubygems-2.0.3, but reinstalling just rubygems should work:
CC=/usr/bin/cc rvm install rubygems latest # substitute "2.0.3" for "latest" if you like.
It appears that this is a bug in rubygems which is scheduled for fixing in 2.0.4.
Hope that helps!
I think this bug provide from FileUtils.
To fix it you need change rubygems script from rvm: nano .rvm/scripts/rubygems
To find words in nano use ctrl+w setup.rb and remove --verbose option.
After this you need ctrl+o to save file and ctrl+x to close nano.
Now you may reinstall rubygems:
rvm rubygems remove
rvm rubygems latest
Sorry for my bad english.
Hope this help you.
In addition to Valery's answer, you might have to do the following before removing and reinstalling:
echo ${LANG:-empty}
export LANG=en_US.utf-8
Links to the problem and solution:
https://github.com/rubygems/rubygems/issues/516
https://github.com/wayneeseguin/rvm/issues/1689
This problem is harmless, rubygems is already installed and will work as expected, this is triggered by https://bugs.ruby-lang.org/issues/7992 - with --verbose flag to rubygems installation - your ruby is fully usable if there was no other error during installation.
A side note, RVM detects all the options/flags you have passed and it is not required to pass them manually, it would be enough to run:
rvm install ruby-1.9.3-p194
The RVM installer ran with --autolibs=3 is equivalent to running it withoug and setting it manually with:
rvm autolibs 3
To get more information on autolibs and available modes run:
rvm help autolibs
Using rvm I upgraded my ruby to 1.9.3-p392, also added 2.0.0, anytime I try to use this version when I run my bundle command I get this error.
Could not load OpenSSL.
You must recompile Ruby with OpenSSL support or change the sources in your Gemfile from 'https' to 'http'. Instructions for compiling with OpenSSL using RVM are
available at rvm.io/packages/openssl.
I have followed several different instructions on how to fix this. I have tried removing the version and installing it with the rvm options
--with-openssl-dir=$HOME/.rvm/usr
I have installed OpenSSL with rvm, and macports. Both have not helped the problem. I even changed the file location of the ssl cert using this:
export SSL_CERT_FILE=/Users/DarkLord/.rvm/usr/ssl/cert.pem
No matter what I do I continue to get the error.
Can someone please help me fix this?
This works for me:
rvm get stable
brew install libyaml
rvm pkg install openssl
rvm install ruby-2.0.0 --with-openssl-dir=$HOME/.rvm/usr
rvm use ruby-2.0.0
All credits go to https://coderwall.com/p/tptocq
This helps me install 1.9.3-head on Mac:
rvm get latest
brew install openssl
rvm reinstall 1.9.3-head --with-openssl-dir=`brew --prefix openssl`
In my case after:
1. brew install openssl
2. rvm install ruby-2.6.0
bundle install failed with this error. The problem was that openssl was globally set so I had to install the new ruby version by setting the openssl directory explicitly.
So what I had to do was:
1. rvm reinstall ruby-2.6.0 --with-openssl-dir=/usr/local/opt/openssl
2. rvm reload
Assuming that usr/local/opt/openssl is where it is installed.
After that bundle install ran successfully.
Warning when I tried this command with this path /usr/local like some answers suggested, it didn't work.
To get this working again I had to install homebrew and move my mac ports out of the way. Then do the following after removing 1.9.3-p392 and 2.0.0-p0:
rvm get head --autolibs=3
rvm install 1.9.3 --with-opt-dir=/usr/bin
rvm install 2.0.0
There was something not working with my mac ports and openssl and make and configure. This was the only way I was able to get rvm to install ruby again with out getting openssl issues or make/configure issues.
The new way to do it, according to a comment by #Purplejacket above, is the following:
rvm autolibs homebrew
rvm install 2.1.1
rvm use 2.1.1
It's much easier.
In my case:
Problem: After installing ruby-2.3.1, I ran the command bundle install and then the error occurred.
Solution:
I first installed OpenSSL on my machine. $ brew install openssl
And then, reinstalled the ruby version I require (2.3.1) with the openssl.
$ rvm reinstall 2.3.1 --with-openssl-dir=/usr/local/opt/openssl
And this solved my problem!
According to the following question:
How to tell which openssl lib is actually being used by an RVM-installed ruby
It seems that the options --with-openssl-dir=... is no longer valid as of Ruby 1.9.3. I tried
rvm install 1.9.3 --with-opt-dir=/usr/local --with-openssl
and it worked.
macOS Catalina
brew install rbenv/tap/openssl#1.0
rvm reinstall 2.3.8 --with-openssl-dir=/usr/local/opt/openssl#1.0
The following steps worked for me.
First ensure openssl is installed by running brew install openssl, then reinstall the ruby version using rvm, but this time around, you have to pass the with-opt-dir flag pointing to the location where openssl was installed on your machine (use command which openssl to find this location).
rvm install 1.9.3-p392 --with-openssl-dir=/usr/local/opt/openssl
On macOS 10.14, Ruby 2.5.3, and OpenSSL 1.0.2n this worked for me:
./configure --with-openssl --with-openssl-dir=/usr/local/ssl
but I was only trying what the error messages were telling me:
*** Following extensions are not compiled:
openssl:
Could not be configured. It will not be installed.
/Users/brian/Desktop/Ruby/ruby-2.5.3/ext/openssl/extconf.rb:97: OpenSSL library could not be found. You might want to use --with-openssl-dir=<dir> option to specify the prefix where OpenSSL is installed.
Check ext/openssl/mkmf.log for more details.
*** Fix the problems, then remove these directories and try again if you want.
make[1]: *** [note] Error 1
I encountered this issue when working on a Ruby 2.2.3 application.
I had previously uninstalled the MySQL database server on my machine, since I did not need it. However, I still needed the mysql2 gem since my application was connecting to another application's MySQL database to pull data.
However, when I try to run the bundle command I get the error:
Could not load OpenSSL.
You must recompile Ruby with OpenSSL support or change the sources in your Gemfile from 'https' to 'http'. Instructions for compiling with OpenSSL using RVM are
available at rvm.io/packages/openssl.
Here's how I solved it:
The issue was caused by removing the libssl-dev library when I was uninstalling the MySQL database server on my machine and its libraries.
First I ran the command below to reinstall ruby since I installed it using rvm:
rvm reinstall ruby-2.2.3
This raised an error:
Making gemset ruby-2.2.3 pristine............................................./-
.'command gem pristine --extensions mysql2 --version 0.5.3' failed, you need to fix these gems manually.
.
Error running '__rvm_with ruby-2.2.3 gemset_pristine',
please read /home/promisepreston/.rvm/log/1630094455_ruby-2.2.3/gemset.pristine-ruby-2.2.3.log
Next, I tried to install the mysql2 gem:
gem install mysql2
Then I ran into this error:
Building native extensions. This could take a while...
ERROR: Error installing mysql2:
ERROR: Failed to build gem native extension.
mysql client is missing. You may need to 'sudo apt-get install libmariadb-dev', 'sudo apt-get install libmysqlclient-dev' or 'sudo yum install mysql-devel', and try again.
Finally, I installed the mysql client library using the command:
sudo apt-get install libmysqlclient-dev
Note: This also installs the libssl-dev library alongside.
And everything worked fine.
That's all.
That's what helped me:
rvm reinstall 2.5
brew tap raggi/ale
brew install openssl-osx-ca
brew services start openssl-osx-ca
Found this solution here: https://github.com/raggi/openssl-osx-ca#readme
I specified a more recent Ruby version in my Gemfile, then ran bundle install. All good now.
Specific case for ruby version 3.0.3
By default for brew and system and autolibs OpenSSL version is 3. Ruby 3.0.3 does not work with OpenSSL version 3 and ruby build silently ignores OpenSSL.
To build ruby properly use build options with OpenSSL 1 like this:
PKG_CONFIG_PATH=/usr/local/opt/openssl#1.1/lib/pkgconfig rvm reinstall 3.0.3 --with-openssl --with-openssl-lib=/usr/local/opt/openssl#1.1/lib --with-openssl-include=/usr/local/opt/openssl#1.1/include
Where path variables may be another - check your system.
Thanks to article Ruby 3.0.3 with OpenSSL using MacPorts and RVM
I got this to work on Ubuntu 22.04 by doing:
rvm pkg install openssl
...and adding --with-openssl-dir=$HOME/.rvm/usr to the rvm install command.
This doesn't seem particularly OS-specific and might work on Mac OS as well.
Fix which worked for me
rvm install 3.0.3 --with-openssl-dir=/opt/homebrew/etc/openssl#1.1
PS. Find the correct openssl location in your machine and install ruby pointing to that path like above, mentioning the brew installed openssl#3 path doesnot work.
I don't use rvm, and I don't want to. I had to install asdf in order to resolve what I used to be able to do with just homebrew & ruby.
Following this guide is the only thing that worked for me after following dozens of suggestions. I had to install asdf and update my .zshrc to include the following at the end of the doc:
eval "$(rbenv init - zsh)"
I'm on an Intel Mac running Monterey 12.2.1.
I'm trying to install ruby 1.8.6 on Snow Leopard using rvm.
I tried:
rvm install ruby-1.8.6-p111
and got an error explaining make couldn't find openssl.
make[1]: *** [openssl_missing.o] Error 1
I then tried:
rvm install ruby-1.8.6-p111 -C --with-openssl-dir=/System/Library/OpenSSL
(Snow Leopard seems to come with openssl and this seems to be the location)
In the logs I get the same error.
As per http://rvm.beginrescueend.com/packages/openssl/ I then tried to install openssl using rvm like so:
rvm package install openssl
This time, in configure.error.log I get:
[2010-07-07 07:54:28] ./Configure os/compiler darwin-i386-cc -I/Users/craig/.rvm/usr/include -L/Users/craig/.rvm/usr/lib --prefix=/Users/craig/.rvm/usr zlib no-asm no-krb5 shared
target already defined - os/compiler (offending arg: darwin-i386-cc)
I'd really appreciate any suggestions.
I know it doesn't help you much, but thanks for the pointer to "rvm package install openssl" -- it fixed the original openssl_missing.o error for me and everything worked fine from there... eventually.
Here's what I ended up doing to get rvm to work on my laptop, minus some silly MacPorts fiddling because I had some old PowerPC binaries installed in /usr/local/lib.
rvm package install openssl
rvm package install readline
rvm package install iconv
sudo port install ncurses
sudo port install libyaml
sudo port install zlib
rvm install 1.9.2-head -C "--with-openssl-dir=$HOME/.rvm/usr --with-libyaml-dir=/opt/local --with-readline-dir=$HOME/.rvm/usr --with-iconv-dir=$HOME/.rvm/usr"
Ha! I just tried to install rvm on my work computer and ran into your original problem!
Looks like there was a bug in ~/.rvm/scripts/package. Try running
rvm update --head
or
rvm get latest
to get the latest version from git and try again.