Suppose I have the following string:
mystring = "start/abc123/end"
How can you splice out the abc123 with something else, while leaving the "/start/" and "/end" elements intact?
I had the following to match for the pattern, but it replaces the entire string. I was hoping to just have it replace the abc123 with 123abc.
mystring.gsub(/start\/(.*)\/end/,"123abc") #=> "123abc"
Edit: The characters between the start & end elements can be any combination of alphanumeric characters, I changed my example to reflect this.
You can do it using this character class : [^\/] (all that is not a slash) and lookarounds
mystring.gsub(/(?<=start\/)[^\/]+(?=\/end)/,"7")
For your example, you could perhaps use:
mystring.gsub(/\/(.*?)\//,"/7/")
This will match the two slashes between the string you're replacing and putting them back in the substitution.
Alternatively, you could capture the pieces of the string you want to keep and interpolate them around your replacement, this turns out to be much more readable than lookaheads/lookbehinds:
irb(main):010:0> mystring.gsub(/(start)\/.*\/(end)/, "\\1/7/\\2")
=> "start/7/end"
\\1 and \\2 here refer to the numbered captures inside of your regular expression.
The problem is that you're replacing the entire matched string, "start/8/end", with "7". You need to include the matched characters you want to persist:
mystring.gsub(/start\/(.*)\/end/, "start/7/end")
Alternatively, just match the digits:
mystring.gsub(/\d+/, "7")
You can do this by grouping the start and end elements in the regular expression and then referring to these groups in in the substitution string:
mystring.gsub(/(?<start>start\/).*(?<end>\/end)/, "\\<start>7\\<end>")
Related
Original string '4.0.0-4.0-M-672092'
How to modify the Original string to "4.0-M-672092" using a one line code.
Any Help is highly appreciated .
Thanks and Regards
The 'split' method works in this case
https://apidock.com/ruby/String/split
'4.0.0-4.0-M-672092'.split('-')[1..-1].join('-')
# => "4.0-M-672092"
Just be careful, in this application is fine, but in long texts this might become unoptimized, since it splits all the string and then joins the array all over again
If you need this in wider texts to be more optimized, you can find the "-" index (which is your split) and use the next position to make a substring
text = '4.0.0-4.0-M-672092'
text[(text.index('-') + 1)..-1]
# => "4.0-M-672092"
But you can't do it in one line, and not finding a split character will result in an error, so use a rescue statement if that is possible to happen
Simplest way:
'4.0.0-4.0-M-672092'.split('-', 2).second
"4.0.0-4.0-M-672092"[/(?<=-).*/]
#=> "4.0-M-672092"
The regular expression reads, "Match zero or more characters other than newlines, as many as possible (.*), provided the match is preceded by a hyphen. (?<=-) is a positive lookbehind. See String#[].
How can I remove all newlines and spaces from a string in Ruby?
For example, if we have a string:
"123\n12312313\n\n123 1231 1231 1"
It should become this:
"12312312313123123112311"
That is, all whitespaces should be removed.
You can use something like:
var_name.gsub!(/\s+/, '')
Or, if you want to return the changed string, instead of modifying the variable,
var_name.gsub(/\s+/, '')
This will also let you chain it with other methods (i.e. something_else = var_name.gsub(...).to_i to strip the whitespace then convert it to an integer). gsub! will edit it in place, so you'd have to write var_name.gsub!(...); something_else = var_name.to_i. Strictly speaking, as long as there is at least one change made,gsub! will return the new version (i.e. the same thing gsub would return), but on the chance that you're getting a string with no whitespace, it'll return nil and things will break. Because of that, I'd prefer gsub if you're chaining methods.
gsub works by replacing any matches of the first argument with the contents second argument. In this case, it matches any sequence of consecutive whitespace characters (or just a single one) with the regex /\s+/, then replaces those with an empty string. There's also a block form if you want to do some processing on the matched part, rather than just replacing directly; see String#gsub for more information about that.
The Ruby docs for the class Regexp are a good starting point to learn more about regular expressions -- I've found that they're useful in a wide variety of situations where a couple of milliseconds here or there don't count and you don't need to match things that can be nested arbitrarily deeply.
As Gene suggested in his comment, you could also use tr:
var_name.tr(" \t\r\n", '')
It works in a similar way, but instead of replacing a regex, it replaces every instance of the nth character of the first argument in the string it's called on with the nth character of the second parameter, or if there isn't, with nothing. See String#tr for more information.
You could also use String#delete:
str = "123\n12312313\n\n123 1231 1231 1"
str.delete "\s\n"
#=> "12312312313123123112311"
You could use String#delete! to modify str in place, but note delete! returns nil if no change is made
Alternatively you could scan the string for digits /\d+/ and join the result:
string = "123\n\n12312313\n\n123 1231 1231 1\n"
string.scan(/\d+/).join
#=> "12312312313123123112311"
Please note that this would also remove alphabetical characters, dashes, symbols, basically everything that is not a digit.
Take this string.
a = "real-ab(+)real-bc(+)real-cd-xy"
a.scan(/[a-z_0-9]+\-[a-z_0-9]+[\-\[a-z_0-9]+\]?/)
=> ["real-ab", "real-bc", "real-cd-xy"]
But how come this next string gets nothing?
a = "real-a(+)real-b(+)real-c"
a.scan(/[a-z_0-9]+\-[a-z_0-9]+[\-\[a-z_0-9]+\]?/)
=> []
How can I have it so both strings output into a 3 count array?
You've confused parentheses (used for grouping) and square brackets (used for character classes). You want
a.scan(/[a-z_0-9]+-[a-z_0-9]+(?:-[a-z_0-9]+)?/)
(?:...) creates a non-capturing group which is what you need here.
Furthermore, unless you want to disallow uppercase letters explicitly, you can write \w as a shorthand for "a letter, digit or underscore":
a.scan(/\w+-\w+(?:-\w+)?/)
a.scan(/[a-z_0-9]+\-[a-z_0-9]+/)
Why not simply?
a.scan(/[a-z_0-9\-]+/)
Apparently I still don't understand exactly how it works ...
Here is my problem: I'm trying to match numbers in strings such as:
910 -6.258000 6.290
That string should gives me an array like this:
[910, -6.2580000, 6.290]
while the string
blabla9999 some more text 1.1
should not be matched.
The regex I'm trying to use is
/([-]?\d+[.]?\d+)/
but it doesn't do exactly that. Could someone help me ?
It would be great if the answer could clarify the use of the parenthesis in the matching.
Here's a pattern that works:
/^[^\d]+?\d+[^\d]+?\d+[\.]?\d+$/
Note that [^\d]+ means at least one non digit character.
On second thought, here's a more generic solution that doesn't need to deal with regular expressions:
str.gsub(/[^\d.-]+/, " ").split.collect{|d| d.to_f}
Example:
str = "blabla9999 some more text -1.1"
Parsed:
[9999.0, -1.1]
The parenthesis have different meanings.
[] defines a character class, that means one character is matched that is part of this class
() is defining a capturing group, the string that is matched by this part in brackets is put into a variable.
You did not define any anchors so your pattern will match your second string
blabla9999 some more text 1.1
^^^^ here ^^^ and here
Maybe this is more what you wanted
^(\s*-?\d+(?:\.\d+)?\s*)+$
See it here on Regexr
^ anchors the pattern to the start of the string and $ to the end.
it allows Whitespace \s before and after the number and an optional fraction part (?:\.\d+)? This kind of pattern will be matched at least once.
maybe /(-?\d+(.\d+)?)+/
irb(main):010:0> "910 -6.258000 6.290".scan(/(\-?\d+(\.\d+)?)+/).map{|x| x[0]}
=> ["910", "-6.258000", "6.290"]
str = " 910 -6.258000 6.290"
str.scan(/-?\d+\.?\d+/).map(&:to_f)
# => [910.0, -6.258, 6.29]
If you don't want integers to be converted to floats, try this:
str = " 910 -6.258000 6.290"
str.scan(/-?\d+\.?\d+/).map do |ns|
ns[/\./] ? ns.to_f : ns.to_i
end
# => [910, -6.258, 6.29]
I have the following string:
"h3. My Title Goes Here"
I basically want to remove the first four characters from the string so that I just get back:
"My Title Goes Here".
The thing is I am iterating over an array of strings and not all have the h3. part in front so I can't just ditch the first four characters blindly.
I checked the docs and the closest thing I could find was chomp, but that only works for the end of a string.
Right now I am doing this:
"h3. My Title Goes Here".reverse.chomp(" .3h").reverse
This gives me my desired output, but there has to be a better way. I don't want to reverse a string twice for no reason. Is there another method that will work?
To alter the original string, use sub!, e.g.:
my_strings = [ "h3. My Title Goes Here", "No h3. at the start of this line" ]
my_strings.each { |s| s.sub!(/^h3\. /, '') }
To not alter the original and only return the result, remove the exclamation point, i.e. use sub. In the general case you may have regular expressions that you can and want to match more than one instance of, in that case use gsub! and gsub—without the g only the first match is replaced (as you want here, and in any case the ^ can only match once to the start of the string).
You can use sub with a regular expression:
s = 'h3. foo'
s.sub!(/^h[0-9]+\. /, '')
puts s
Output:
foo
The regular expression should be understood as follows:
^ Match from the start of the string.
h A literal "h".
[0-9] A digit from 0-9.
+ One or more of the previous (i.e. one or more digits)
\. A literal period.
A space (yes, spaces are significant by default in regular expressions!)
You can modify the regular expression to suit your needs. See a regular expression tutorial or syntax guide, for example here.
A standard approach would be to use regular expressions:
"h3. My Title Goes Here".gsub /^h3\. /, '' #=> "My Title Goes Here"
gsub means globally substitute and it replaces a pattern by a string, in this case an empty string.
The regular expression is enclosed in / and constitutes of:
^ means beginning of the string
h3 is matched literally, so it means h3
\. - a dot normally means any character so we escape it with a backslash
is matched literally