I got a simple sheet in which I got some columns of data representing certain grid-line i.e. A-25, B-35, C-41 etc and I got another column in which the data is like B-25.5, C-26.5 etc. I want to compare the both columns and know for each item that which item is bigger or smaller (grid-line sense) than the other. e.g. C-26.5 will surely be lesser than C-41. I need a simple algorithm or code to achieve the same.
Related
I'm an average user of Google sheets and I've tried writing/looking up the formula I'm going for, but I haven't had any luck yet.
I have a spreadsheet that details multiple values that I need to display in a single cell the average of a certain set of values derived from a specific set of those values from multiple columns.
The flow of information would look something along the lines of:
if value in Column D=L
then
if value in Column J<$1.20
then
Find Avg of all Values in Column N
I'd need the formula to narrow it's field of data each time so the final result was the average of all the values in Column N that had a value in column J<$1.20 with a value in Column D=L.
I feel like a dummy over here because I just can't narrow down how I should write this flow and get it to work right without adding multiple extra hidden columns. Can anyone help on this one?
I've tried writing the formula multiple different ways but haven't kept it written down to pass on.
I have multiple rows, containing varying number of cells, and in each cell I have one or more words.
I'm looking for a way to go row by row:
Splitting the multiple words into single word parts (with space (" ") as the delimiter)
Sort the parts alphabetically
Put the parts back into multiple word cells
Remove duplicates in the row
Already the first, seemingly easy part, gave me issues. Even if I just tried to look at one row, the closest I got was the code below and that inserted strange " " for the one word cells, and also failed to sort
=iferror(arrayformula(transpose(sort(transpose(SPLIT(transpose(B3:3)," "))))),"")
1
I also tried to cut, sort and join the above output using the Query Header trick, but it refuses so sort anything but the first row
=arrayformula(trim(transpose(query(SORT(transpose(B12:D)),,COLUMNS(B12:D)))))
2
I haven't even attempted combining the two things together, considering my epic fails above.
The final input document will have lots more rows and columns, so I also need to make sure this works without any hard coding of row or column numbers.
Any and all help would be greatly appreciated.
I might have something for you. It's a little bit of an odd way to do it, but it could work I think.
Take a look at this sheet.
The original data is in the Original tab in cells B3:J, all the way down.
The Converter tab puts every thing in one column, then there is a "dragdown formula" that'd need to be dragged down a long ways depending on how big your data set it is. The good news is that you can just do it for thousands of rows beforehad and it will remain blank.
the New Data tab has just one formula and will repopulate your data the way it was, but with the resorted words.
Try messing with the data on the Original Data tab as much as you want. see if New Data reflects what you'd want.
I'm not a VBA coder, and I would prefer an excel formula if possible, the easiest solution will be the best one.
Test workbook screenshot
As you can see, I have plenty of columns, which are filterable.
I am attempting to retrieve an average of Column L, but I want the data to be calculated for the correct month in G3:R3.
The resulting calculation needs to be recalculated when filtered, between customers, sites, status, job type etc.
I am referencing the resulting cells in another sheet, which gives an idea of trends I can glance at, as such filtering by month in each sheet, is not an option.
=AVERAGE(IF(MONTH(E9:E1833)=1,(J9:J1833)))
This one does not update with the filtered data.
=SUM(IF(MONTH(E9:E1833)=1,J9:J1833,0)) /SUM(IF(MONTH(E9:E1833)=1,1))
This one does not update with the filtered data.
I have tried 5 different SUBTOTAL formulas, some with OFFSET, none of these produce the same result I get when checking manually.
Each worksheet has over 1,500 hundred rows, the largest is 29148 rows. The data goes back as far as 2005.
Please can someone help me find a solution?
One possible solution is to create a helper column which returns 1 if the row is visible and returns 0 if the row is invisible (or blank). This allows a bit more freedom in your formulas.
For example, if you want to create a helper column in column X, type this into cell X9 and drag down:
= SUBTOTAL(103,A9)
Now you can create a custom average formula, for example:
= SUMPRODUCT((MONTH(E9:E1833)=1)*(X9:X1833)*(J9:J1833))/
SUMPRODUCT((MONTH(E9:E1833)=1)*(X9:X1833))
Not exactly pretty but it gets the job done. (Note this is an array formula, so you must press Ctrl+Shift+Enter on your keyboard instead of just Enter after typing this formula.)
With even more helper columns you could avoid SUMPRODUCT altogether and just accomplish this by doing a single AVERAGEIFS.
For example if you type into cell Y9 and drag down:
= MONTH(E9)
Then your formula could be:
= AVERAGEIFS(J9:J1833,X9:X1833,1,Y9:Y1833,1)
There isn't a clean way to do this without at least one helper function (if you want to avoid VBA).
EVE Online Manufacturing Spreadsheet
In Batch!F3:G, I'm attempting to break down the data input from columns B3:C to their components (and eventually materials/minerals in I3:J) by using filter to compare results in Engine!P:R. Multiplied of course by the total number of each finished product I need.
I've been trying to figure out ways to arrayformula this together, and even tried quite a few query functions without success. The best I've been able to come up with is to string the actual formula together, appending them with {}, but this gets bloated quickly. I need this to be open ended because I have a tendency to build a lot of things at once. Any help would be appreciated, even just point me in the right direction!
Well, based on my limited knowledge about google sheet, I can only think of one way to do this automatically.
Here's a sheet I constructed based on your sheet.
https://docs.google.com/spreadsheets/d/1AfX8o05gUGPiN5S90w4o0yxuIYjsJRaXsaYUFTJuEPo/edit?usp=sharing
First, on Engine sheet, add one more column which will give you the number of materials required for that part, which is looked up in the PART LIST of BATCH sheet. For this I use VLOOKUP, as you see in D2.
Then on BATCH sheet, query the materials that VLOOKUP return positive, multiply it by the amount of item and then sum them.
This is done by the QUERY used in F3
This method only if you don't have duplicate item in your PART LIST, due to the way VLOOKUP work.
Of course if you want to break the material list further, you can do the same approach..
Can someone please direct me to a detailed explanation (link) of the Gnumeric sort function? The Gnumeric manual is abbreviated and has no examples. I haven't been able to find any appropriate info through the search engines and even Stackoverflow only has half a dozen questions on it which don't suit.
My problem is:
I have a table with rows of dates, names, and columns of data. (pretty straightforward stuff).
I want to sort ALL columns by the NAME column.
That is: keep each row intact for data but move them in the table up or down so that the order is alphabetic by name.
I can do this easily with Libercalc but prefer the feel and simplicity of Gnumeric, yet I have never been able to understand from the drop-down sort menu how to get this done. I can sort any column fine by itself, but can't seem to lock the other data in the row to be taken with it.
This is such a frequent function I'm surprised it's not made clearer in the drop-down menu. That is: Order by column x
The only way one can sort with Gnumeric, apparently, is to move the key column (i.e. in my case the NAME column) to be the left-most column (column A) in the table, and then sort, subsequently moving the columns back into their required format (date and time in first column) as I want it. This seems very clumsy to me and I wondered if there was an easier way of ordering a table in any format (e.g. just as it is imported from the csv file) by simply selecting the column to sort wherever it is in the table, as can be done in LiberCalc?
1) You need to select ALL the columns you want to sort:
menu > data > sort
2) Keep the column with the NAMEs to be sorted, and remove the rest of the columns in:
sort specification