I'm trying to install extension to PHP 5.3.6 on Ubuntu 11.10.
Extension is: php-protobuf from https://github.com/allegro/php-protobuf.
First I compiled it: phpize, ./configure, make then finally sudo make install. I got:
Installing shared extensions: /usr/lib/php5/20090626/
ziel#ziel:/usr/lib/php5/20090626$ ls -la protobuf.so
-rwxr-xr-x 1 root root 113599 2013-06-13 20:48 protobuf.so
In /etc/php5/apache2/php.ini I set:
; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
extension_dir = "/usr/lib/php5/20090626/"
extension="/usr/lib/php5/20090626/protobuf.so"
But php -m says that that no protobuf extension is loaded.
[SOLVED]
I was doing everything OK. When I execute code via apache it worked. I realized that php from console need php.ini included.
Just specify "protobuf.so" on the extension_dir INI entry. (check Apache error log file too)
About the php cli, check out where php.ini is being searched for.
php -i | grep .ini
Related
I'm trying to remove the Blackfire profiler that was installed on the server via Laravel Forge.
Under "Integrations" I clicked "Uninstall" on Blackfire and restarted PHP, but now I'm getting the following warning on Sentry:
Core Warning: PHP Startup: Unable to load dynamic library 'blackfire.so' (tried: /usr/lib/php/20190902/blackfire.so (/usr/lib/php/20190902/blackfire.so: cannot open shared object file: No such file or directory), /usr/lib/php/20190902/blackfire.so.so (/usr/lib/php/20190902/blackfire.so.so: cannot open shared object file: No such file or directory))
I have checked the php.ini file and can find no reference to Blackfire.
Search for references in phpinfo:
php -i | grep 'blackfire'
Output:
/etc/php/7.4/cli/conf.d/99-blackfire.ini
Find out what is trying to load it:
php --ini
Output:
Scan for additional .ini files in: /etc/php/7.4/cli/conf.d
Delete config file:
sudo rm /etc/php/7.4/cli/conf.d/99-blackfire.ini
Repeat for fpm version:
sudo rm /etc/php/7.4/fpm/conf.d/99-blackfire.ini
Restart PHP
I am trying to install this PHP mailparser. I have Composer installed and the required mailparse extension is also installed. However, when I run:
composer require php-mime-mail-parser/php-mime-mail-parser
I get the following error:
[Composer\Downloader\TransportException] The
"https://repo.packagist.org/packages.json" file could not be
downloaded : allow_url_fopen must be enabled in php.ini (https://
wrapper is disabled in the server configuration by allow_url_fopen=0
failed to open stream: no suitable wrapper could be found)
However, I've checked php.ini and it clearly says it's enabled, i.e.
allow_url_fopen = On
How could I get that specific of an error about needing to enable allow_url_fopen even though it definitely IS enabled?
Run this command:
php -d allow_url_fopen=on <composer_path> <composer_arguments>
Replace <composer_path> with the direct path to the composer executable (e.g. /opt/cpanel/composer/bin/composer) and <composer_arguments> with the arguments you are passing to composer (e.g. require php-mime-mail-parser/php-mime-mail-parser).
This works for me:
php -d allow_url_fopen=1 /opt/cpanel/composer/bin/composer install
I'm trying to install Xdebug on the Mac and from the created instructions, I get this output below from http://xdebug.org/wizard.php after pasting in my phpinfo as instructed. I'm getting stopped on Step 5. There is no .configure file in my downloaded tar.gz file. Any thoughts?
Tailored Installation Instructions
Summary
Xdebug installed: no
Server API: Apache 2.0 Handler
Windows: no
Zend Server: no
PHP Version: 5.3.15
Zend API nr: 220090626
PHP API nr: 20090626
Debug Build: no
Thread Safe Build: no
Configuration File Path: /etc
Configuration File: /private/etc/php.ini
Extensions directory: /usr/lib/php/extensions/no-debug-non-zts-20090626
Instructions
Download xdebug-2.2.3.tgz
Unpack the downloaded file with tar -xvzf xdebug-2.2.3.tgz
Run: cd xdebug-2.2.3
Run: phpize (See the FAQ if you don't have phpize.
As part of its output it should show:
Configuring for:
...
Zend Module Api No: 20090626
Zend Extension Api No: 220090626
If it does not, you are using the wrong phpize. Please follow this FAQ entry and skip the next step.
Run: ./configure
Run: make
Run: cp modules/xdebug.so /usr/lib/php/extensions/no-debug-non-zts-20090626
Edit /private/etc/php.ini and add the line
zend_extension = /usr/lib/php/extensions/no-debug-non-zts-20090626/xdebug.so
Restart the webserver
xdebug.so was in the zend folders in /usr/lib/php/extensions/no-debug-non-zts-20090626
I upgraded my Mac from Lion to Mountain Lion a few months ago.
I previously had PHPUnit working with my Zend Framework 1.11 without issue but had not used it much.
I now have Zend Framewoprk 2 running on a Quick Start website but I simply cannot gwet PHPUnit to work.
I've searched numerous questions related to this on Stackoverflow and tried reinstalls and path changes to php.ini without success.
I have also checked that my PEAR install is working fine, which it is but the error is the same when I try "phpunit --version"
PHP Warning: require(/usr/lib/php/PHPUnit/Autoload.php): failed to open stream: No such file or directory in /usr/bin/phpunit on line 43
Warning: require(/usr/lib/php/PHPUnit/Autoload.php): failed to open stream: No such file or directory in /usr/bin/phpunit on line 43
PHP Fatal error: require(): Failed opening required '/usr/lib/php/PHPUnit/Autoload.php' (include_path='.:/Users/johnadmin/pear/share/pear/PEAR:/Users/johnadmin/pear/share/pear:/usr/bin/phpunit:/Users/johnadmin/pear/share/pear/PHPUnit:/usr/bin/phpunit:/Users/johnadmin/pear/bin/pear') in /usr/bin/phpunit on line 43
Fatal error: require(): Failed opening required '/usr/lib/php/PHPUnit/Autoload.php' (include_path='.:/Users/johnadmin/pear/share/pear/PEAR:/Users/johnadmin/pear/share/pear:/usr/bin/phpunit:/Users/johnadmin/pear/share/pear/PHPUnit:/usr/bin/phpunit:/Users/johnadmin/pear/bin/pear') in /usr/bin/phpunit on line 43
Attempts to reinstall phpunit results in me been told phpunit is already installed and its version current.
$ sudo pear install phpunit/PHPUnit
phpunit/PHPUnit is already installed and is the same as the released version 3.7.10
install failed
Trying to uninstall fails as phpunit is a dependancy in other items/applications.
Is there anyway I can fix this or completely remove it and reinstall fresh?
include_path in my php.ini is:
include_path=".:/Users/johnadmin/pear/share/pear/PEAR:/Users/johnadmin/pear/share/pear:/usr/bin/phpunit:/Users/johnadmin/pear/share/pear/PHPUnit:/usr/bin/phpunit:/Users/johnadmin/pear/bin/pear"
Additional info in case its relevant:
> which phpunit
/usr/bin/phpunit
> which pear
/Users/johnadmin/pear/bin/pear
> which php
/usr/bin/php
Autoload.php is located in
/Users/johnadmin/pear/share/pear/PHPUnit
Additionally, the folder '/usr/lib/php/' exists but the PHPUnit directory is not under that, it is under /Users/johnadmin/pear/share/pear/PHPUnit
bash_profile content/paths
PATH=$PATH:/usr/local/Cellar/imagick/3.0.1:/usr/local/sbin:/Users/johnadmin/pear/share/pear:$
##
# Your previous /Users/johnadmin/.bash_profile file was backed up as /Users/johnadmin/.bash_$
##
# MacPorts Installer addition on 2012-04-17_at_08:37:29: adding an appropriate PATH variable$
export PATH=/opt/local/bin:/opt/local/sbin:$PATH
# Finished adapting your PATH environment variable for use with MacPorts.
##
# Your previous /Users/johnadmin/.bash_profile file was backed up as /Users/johnadmin/.bash_$
##
# MacPorts Installer addition on 2012-10-09_at_16:09:32: adding an appropriate PATH variable$
export PATH=/opt/local/bin:/opt/local/sbin:$PATH
# Finished adapting your PATH environment variable for use with MacPorts.
##
# Your previous /Users/johnadmin/.bash_profile file was backed up as /Users/johnadmin/.bash_$
##
# MacPorts Installer addition on 2012-12-06_at_13:40:25: adding an appropriate PATH variable$
export PATH=/opt/local/bin:/opt/local/sbin:$PATH
# Finished adapting your PATH environment variable for use with MacPorts.
At my wits end as I do not know what else to check frankly and any help would be a big help. Ta
John
Nevermind after hours of trying various solutions I found that creating a simlink to the PHPUnit folder worked.
Command I used was
sudo ln -s /Users/johnadmin/pear/share/pear/PHPUnit /usr/lib/php/PHPUnit
Seriously, this helped me a lot:
Install Composer (http://getcomposer.org)
composer require phpunit/phpunit 3.7.*
composer update
Three simple steps to pull PHPUnit source, and binary to your project.
I just did a clean install of Windows 7. I've installed Apache, Mysql
and PHP 5.3.5 all separated (not using XAMPP/others).
I'm getting the following error in the install: ERROR: unable to unpack phar://C:/Web/php-5.3.5/PEAR/go-pear.phar/PEAR/go-pear-tarballs/Structures_Graph-1.0.2.tar
The full stack trace is:
C:\Web\php-5.3.5>go-pear.bat
Are you installing a system-wide PEAR or a local copy?
(system|local) [system] : system
Below is a suggested file layout for your new PEAR installation. To change individual locations, type the number in front of the directory. Type 'all' to change all of them or simply press Enter to accept these locations.
1. Installation base ($prefix) : C:\Web\php-5.3.5
2. Temporary directory for processing : C:\Web\php-5.3.5\tmp
3. Temporary directory for downloads : C:\Web\php-5.3.5\tmp
4. Binaries directory : C:\Web\php-5.3.5
5. PHP code directory ($php_dir) : C:\Web\php-5.3.5\pear
6. Documentation directory : C:\Web\php-5.3.5\docs
7. Data directory : C:\Web\php-5.3.5\data
8. User-modifiable configuration files directory : C:\Web\php-5.3.5\cfg
9. Public Web Files directory : C:\Web\php-5.3.5\www
10. Tests directory : C:\Web\php-5.3.5\tests
11. Name of configuration file : C:\Web\php-5.3.5\pear.ini
12. Path to CLI php.exe : C:\Web\php-5.3.5
1-12, 'all' or Enter to continue:
Beginning install...
Configuration written to C:\Web\php-5.3.5\pear.ini...
Initialized registry...
Preparing to install...
installing phar://C:/Web/php-5.3.5/PEAR/go-pear.phar/PEAR/go-pear-tarballs/Archive_Tar-1.3.3.tar...
installing phar://C:/Web/php-5.3.5/PEAR/go-pear.phar/PEAR/go-pear-tarballs/Console_Getopt-1.2.3.tar...
installing phar://C:/Web/php-5.3.5/PEAR/go-pear.phar/PEAR/go-pear-tarballs/PEAR-1.8.0.tar...
installing phar://C:/Web/php-5.3.5/PEAR/go-pear.phar/PEAR/go-pear-tarballs/Structures_Graph-1.0.2.tar...
installing phar://C:/Web/php-5.3.5/PEAR/go-pear.phar/PEAR/go-pear-tarballs/XML_Util-1.2.1.tar...
install ok: channel://pear.php.net/Archive_Tar-1.3.3
install ok: channel://pear.php.net/Console_Getopt-1.2.3
ERROR: unable to unpack phar://C:/Web/php-5.3.5/PEAR/go-pear.phar/PEAR/go-pear-tarballs/Structures_Graph-1.0.2.tar
install ok: channel://pear.php.net/XML_Util-1.2.1
install ok: channel://pear.php.net/PEAR-1.8.0
PEAR: Optional feature webinstaller available (PEAR's web-based installer)
PEAR: Optional feature gtkinstaller available (PEAR's PHP-GTK-based installer)
PEAR: Optional feature gtk2installer available (PEAR's' PHP-GTK2-based installer)
PEAR: To install optional features use "pear install pear/PEAR#featurename"
** WARNING! Old version found at C:\Web\php-5.3.5, please remove it or be sure t
o use the new c:\web\php-5.3.5\pear.bat command
The 'pear' command is now at your service at c:\web\php-5.3.5\pear.bat
* WINDOWS ENVIRONMENT VARIABLES *
For convenience, a REG file is available under C:\Web\php-5.3.5\PEAR_ENV.reg .
This file creates ENV variables for the current user.
Double-click this file to add it to the current user registry.
C:\Web\php-5.3.5>
After days of googling I've found an answer. Here is it. How to solve:
With admin permission (start cmd with admin privileges):
Run the go-pear.bat that comes with the default PHP installation. It'll installs PEAR, but it's going to generate an error when installing Structures_Graph. IMO Pear needs this package to generate the package dependency (graph), since it's missing it not allow us to install or upgrade any other package.
Download and uncompress Structures_Graph from the pear.php.net website (direct link). Then copy the Structure folder into the PEAR folder. The archive has three folders: docs, Structures, tests. We only need the Structures one. Copy the Structures folder to your PHP_ROOT_DIRECTORY\PEAR directory. So if you installed PHP on C:\Web\php-5.3.5 copy the Structures folder to C:\Web\php-5.3.5\PEAR\, the result should be: C:\Web\php-5.3.5\PEAR\Structures
Do pear install Structures_Graph. Even though the files are present, Structures_Graph is not really installed (we had a problem during installation). So we need to run the command above.
Do pear upgrade PEAR. This upgrades PEAR itself to the current version.
Do pear upgrade Console_Getopt. This upgrades Console_Getopt to the current version and now we can manage and install any pear package.
Marcos Roriz solution does indeed work, but to clarify point 2:
The uncompressed "Structures" folder (inside the tgz) needs to be placed inside the folder: "PEAR\pear" -> e.g. C:\wamp\bin\php\php5.3.5\PEAR\pear
This is a combination of the things you need to do and a couple of new tweaks. Worked on WinXP Pro with WAMP (Wampserver 2.2.1)
Change your go-pear.bat file:
#ECHO OFF
set PHP_BIN=php.exe
%PHP_BIN% -d output_buffering=0 -d phar.require_hash=0 PEAR\go-pear.phar
pause
Run it - go-pear.bat
Now you've go a Pear install with a missing graph.php
Download and uncompress Structures_Graph from the pear.php.net website. Copy the Structure folder into the PEAR folder so that the key files are located as such:
PEAR\Structures\Graph.php
PEAR\Structures\Graph\Node.php
Change this line in Node.php:
require_once '/Structures/Graph.php';
Execute in the PEAR directory:
pear upgrade=all
That did it for me.
First of all, run as administrator.
Then - try to write something in target directory in the console to isolate any remaining permissions problems.
I've been having many issues after upgrading my wampserver which now comes with php 5.3.5.
I have solved the problem by installing php 5.3.0 alongside and using it to run the installer found at http://pear.php.net/go-pear. I set the php cli setting to the php5.3.5 folder without any issues.
This might be wampserver specific. To gauge if you are experiencing a similar problem here are some of the issues I encountered:
Using the go-pear.bat packaged with php5.3.5 i had the same unable to unpack error as the original poster.
Using the go-pear.bat packaged with php5.3.0 i was able to complete the installation but the pear installer was v1.8.0
Using the installer on the pear site mentioned previously with php5.3.5 i had an error "Warning: rmdir(D:\temp): Directory not empty in D:\go-pear.php on line 1237". Looking at the stack trace the Archive_Tar class was throwing an error and the installer was failing to clean up after itself.
the web frontend not write correct paths to pear.ini
ig phph setting is magic_quotes_gpc = On
its doubles all slashes "\" in paths to "\" is it a bug ?
Than the packages for example can be unpacked (wrong paths ?)
"unable to unpack" Message when installing packages
http://pear.php.net/bugs/bug.php?id=18212
I tried all of the above with no luck. After downloading and extracting the "Structures" folder I had to edit all paths and add "PEAR/". Then I was able to do "pear install Structures_Graph" and then "pear upgrade-all"
Graph.php
require_once 'PEAR/Structures/Graph/Node.php';
Node.php
require_once 'PEAR/Structures/Graph.php';
AcyclicTest.php
require_once 'PEAR/Structures/Graph.php';
require_once 'PEAR/Structures/Graph/Node.php';
TopologicalSorter.php
require_once 'PEAR/Structures/Graph.php';
require_once 'PEAR/Structures/Graph/Node.php';
require_once 'PEAR/Structures/Graph/Manipulator/AcyclicTest.php';