#echo off
for /f "tokens=* delims= " %%f in (myfile) do (
set line=%%f
call :processToken
)
goto :eof
:processToken
for /f "tokens=1* delims=/" %%a in (%line%) do (
echo Got one token: %%a
set line=%%b
)
if not "%line%" == "" goto :processToken
goto :eof
In my text file I have lines like
"test a","test b","testdim"
"Line 2", "test d","testdin"
so when i see for /f "tokens=1* delims=/" %%a in (%line%) do ( with ECHO ON, %line% is showing as "test a" "test b" "testdim".
I dont know why commas are missing but I need those commas so that I can use "delims=," to get these values out of each line.
try this, added some double quotes:
#echo off &SETLOCAL
for /f "tokens=* delims= " %%f in (file) do (
set "line=%%f"
call :processToken
)
goto :eof
:processToken
ECHO "%line%"
for /f "tokens=1* delims=/" %%a in ("%line%") do (
echo Got one token: "%%a"
set "line=%%b"
)
if not "%line%" == "" goto :processToken
goto :eof
#echo off
for /f "tokens=* delims= " %%f in (myfile) do (
set line=%%f
call :processToken
)
goto :eof
:processToken
for %%a in (%line%) do (
echo Got one token: %%a
)
goto :eof
Related
I am attempting to create a batch file that will rename a series of file based on an XML file. It works until it encounters a file name with the same name at which point it skips the file. I was able to amend the script to create an incremental version of the file, the issue that I am having now is the script will cycle through just a few files and then it exits. Any ideas why it's doing that?
for %%z in ("C:\Recordings\AT1*.WAV") do (
for /f tokens^=4^,8^,10^,12^ delims^=^" %%a in ('type "C:\Recordings\index.xml"^|find /i "%%~nxz"') do (
for /f "tokens=1,2 delims=:" %%t in ("%%b") do (
ren "%%z" "%%c-%%t-%%u_%%d%%~xz" 2>nul
if errorlevel 1 set "Number=2" & call :NumberedRename "%%z" "%%c_%%t-%%u_%%d%%~xz"
goto :EOF
)
)
)
)
:NumberedRename
if exist "%~n2_%Number%%~x2" set /A "Number+=1" & goto NumberedRename
ren %1 "%~n2_%Number%%~x2"
goto :EOF
Here is an example of the output that I am able to see at the moment:
C:\Recordings>for %z in ("C:\Recordings\AT1*.WAV") do (for /F tokens=4,8,10,12 delims=" %a in ('type "C:\Recordings\index.xml"|find /i "%~nxz"') do (for /F "tokens=1,2 delims=:" %t in ("%b") do (
ren "%z" "%c-%t-%u_%d%~xz" 2>nul
if errorlevel 1 set "Number=2" & call :NumberedRename "%z" "%c_%t-%u_%d%~xz"
goto :EOF
) ) )
C:\Recordings>(for /F tokens=4,8,10,12 delims=" %a in ('type "C:\Recordings\index.xml"|find /i "AT1_ID1_TT3_ID6-1626034093.52156.WAV"') do (for /F "tokens=1,2 delims=:" %t in ("%b") do (
ren "C:\Recordings\AT1_ID1_TT3_ID6-1626034093.52156.WAV" "%c-%t-%u_%d.WAV" 2>nul
if errorlevel 1 set "Number=2" & call :NumberedRename "C:\Recordings\AT1_ID1_TT3_ID6-1626034093.52156.WAV" "%c_%t-%u_%d.WAV"
goto :EOF
C:\Recordings>if exist "John Doe 1_2021-07-11 15-08_9394056960_2.WAV" set /A "Number+=1" & goto NumberedRename
C:\Recordings>ren "C:\Recordings\AT1_ID1_TT3_ID6-1626034093.52156.WAV" "John Doe 1_2021-07-11 15-08_9394056960_2.WAV"
) ) )
Shortly after posting the question I tinkered with the script and realized that one of the goto :EOF was causing the script to end prematurely. I removed the goto :EOF and it seems to be working as intended.
Updated Script
for %%z in ("C:\Recordings\AT1*.WAV") do (
for /f tokens^=4^,8^,10^,12^ delims^=^" %%a in ('type "C:\Recordings\index.xml"^|find /i "%%~nxz"') do (
for /f "tokens=1,2 delims=:" %%t in ("%%b") do (
ren "%%z" "%%c-%%t-%%u_%%d%%~xz" 2>nul
if errorlevel 1 set "Number=2" & call :NumberedRename "%%z" "%%c_%%t-%%u_%%d%%~xz"
)
)
)
)
:NumberedRename
if exist "%~n2_%Number%%~x2" set /A "Number+=1" & goto NumberedRename
ren %1 "%~n2_%Number%%~x2"
goto :EOF
Codes as below:
im getting below error:
FINDSTR: No search strings
I have traced the error an its coming from here:
for /F "tokens=1* delims=:" %%a in ('findstr /N "^" "!FILENAME!" ^| findstr /B "%numbers%"') do (...
Script is working properly if Im replacing FILENAME variable with exact filename manually. But I need to put it in a loop to execute within multiple files..
for /r %%i in (LOG_FILE*.txt) do (
set FILENAME=%%~nxi
for /F "delims=:" %%a in ('findstr /I /N /C:"fin.700 " !FILENAME!') do (
set /A val1=%%a-3, val2=%%a+3, val3=%%a+4, val4=%%a+11, val5=%%a+13 , val6=%%a+29, val7=%%a+30
set "numbers=!numbers!!val1!: !val2!: !val3!: !val4!: !val5!: !val6!: !val7!: "
)
set FILENAME=!FILENAME:~0,-1!
echo !FILENAME!>>tmptmptmp.tmp
for /F "tokens=1* delims=:" %%a in ('findstr /N "^" "!FILENAME!" ^| findstr /B "%numbers%"') do (
set linestr=%%b
echo !linestr!
)
)
Working without the outer FOR loop
#echo off
setlocal EnableDelayedExpansion
setlocal enableextensions
rem Assemble the list of line numbers
set numbers=
if exist "tmp" del "tmp"
if exist "tmp2" del "tmp2"
if exist "tmp.txt" del "tmp.txt"
REM for /r %%i in (LOG_FILE*.txt) do (
REM set FILENAME=%%~nxi
set FILENAME=LOG_FILE14012015.txt
for /F "delims=:" %%a in ('findstr /I /N /C:"fin.700 " !FILENAME!') do (
set /A val1=%%a-3, val2=%%a+3, val3=%%a+4, val4=%%a+11, val5=%%a+13 , val6=%%a+29, val7=%%a+30
set "numbers=!numbers!!val1!: !val2!: !val3!: !val4!: !val5!: !val6!: !val7!: "
)
for /F "tokens=1* delims=:" %%a in ('findstr /N "^" "%FILENAME%" ^| findstr /B "%numbers%"') do (
set linestr=%%b
echo !linestr!
)
Thanks for the help guys. I did a workaround as im not able to force the findstr to work properly with my requirements. Did two separate batch script to handle the logic. Below is a copy in case anyone is interested.
bat file that will handle the outer for loop:
#echo off
setlocal EnableDelayedExpansion
setlocal enableextensions
::Script that will loop for multiple files and will call search.bat
if exist "tmp.txt" del "tmp.txt"
if exist "multiple_search.log" del "multiple_search.log"
#echo Starting search... >> multiple_search.log
for /r %%i in (LOG_FILE*.txt) do (
#echo Searching %%i >> multiple_search.log
call search.bat %%i
)
#echo Search completed... >> multiple_search.log
endlocal
Main bat file:
#echo off
setlocal EnableDelayedExpansion
setlocal enableextensions
set numbers=
if exist "tmp" del "tmp"
if exist "tmp2" del "tmp2"
set FILENAME=%1
for /F "delims=:" %%a in ('findstr /I /N /C:"fin.700 " !FILENAME!') do (
set /A val1=%%a-3, val2=%%a+3, val3=%%a+4, val4=%%a+11, val5=%%a+13 , val6=%%a+29, val7=%%a+30
set "numbers=!numbers!!val1!: !val2!: !val3!: !val4!: !val5!: !val6!: !val7!: "
)
for /F "tokens=1* delims=:" %%a in ('findstr /N "^" "%FILENAME%" ^| findstr /B "%numbers%"') do (
set linestr=%%b
echo !linestr!
echo !linestr!>>tmp
)
set delim==
for /f "tokens=1*" %%a in (tmp) do (
echo %%a|find "!delim!" >nul
if !errorlevel!==0 (echo %%a%%b >> tmp2) else (echo record=%%a%%b >> tmp2)
)
set counter=0
set var=
for /f "tokens=1* delims==" %%a in (tmp2) do (
set /a counter=!counter!+1
set var=!var!%%b
set var=!var: =!
set var=!var!,
if !counter! geq 7 (
echo !var! >> tmp.txt
set counter=0
set var=)
)
endlocal
Device1.bat
#echo off
:: script for updating property files
SETLOCAL EnableExtensions
SETLOCAL EnableDelayedExpansion
if "%3"=="" (
ECHO Script will optionally accept 3 args: PropKey PropVal File
SET PROPKEY=Deviceid
SET PROPVAL=dfs2341f
SET FILE=config.properties
) ELSE (
SET PROPKEY=%1
SET PROPVAL=%2
SET FILE=%3
)
FINDSTR /B %PROPKEY% %FILE% >nul
IF %ERRORLEVEL% EQU 1 GOTO nowork
MOVE /Y "%FILE%" "%FILE%.bak"
FOR /F "USEBACKQ tokens=*" %%A IN (`TYPE "%FILE%.bak" ^|FIND /N /I "%PROPKEY%"`) DO (
SET LINE=%%A
)
FOR /F "tokens=1,2* delims=]" %%S in ("%LINE%") DO SET LINE=%%S
SET /A LINE=%LINE:~1,6%
SET /A COUNT=1
FOR /F "USEBACKQ tokens=*" %%A IN (`FIND /V "" ^<"%FILE%.bak"`) DO (
IF "!COUNT!" NEQ "%LINE%" (
ECHO %%A>>"%FILE%"
) ELSE (
ECHO %PROPKEY%=%PROPVAL%>>"%FILE%"
ECHO Updated %FILE% with value %PROPKEY%=%PROPVAL%
)
SET /A COUNT+=1
)
GOTO end
:nowork
echo Didn't find matching string %PROPKEY% in %FILE%. No work to do.
pause
:end
Device2.bat
#echo off
:: script for updating property files
SETLOCAL EnableExtensions
SETLOCAL EnableDelayedExpansion
if "%3"=="" (
ECHO Script will optionally accept 3 args: PropKey PropVal File
SET PROPKEY=Deviceid
SET PROPVAL=dfs2341f
SET FILE=config.properties
) ELSE (
SET PROPKEY=%1
SET PROPVAL=%2
SET FILE=%3
)
FINDSTR /B %PROPKEY% %FILE% >nul
IF %ERRORLEVEL% EQU 1 GOTO nowork
MOVE /Y "%FILE%" "%FILE%.bak"
FOR /F "USEBACKQ tokens=*" %%A IN (`TYPE "%FILE%.bak" ^|FIND /N /I "%PROPKEY%"`) DO (
SET LINE=%%A
)
FOR /F "tokens=1,2* delims=]" %%S in ("%LINE%") DO SET LINE=%%S
SET /A LINE=%LINE:~1,6%
SET /A COUNT=1
FOR /F "USEBACKQ tokens=*" %%A IN (`FIND /V "" ^<"%FILE%.bak"`) DO (
IF "!COUNT!" NEQ "%LINE%" (
ECHO %%A>>"%FILE%"
) ELSE (
ECHO %PROPKEY%=%PROPVAL%>>"%FILE%"
ECHO Updated %FILE% with value %PROPKEY%=%PROPVAL%
)
SET /A COUNT+=1
)
GOTO end
:nowork
echo Didn't find matching string %PROPKEY% in %FILE%. No work to do.
pause
:end
I am running device1.bat and device2.bat at a time. Device1.bat is running properly.But device2.bat throwing The process cannot access the file because it is being used by another process.please help me to solve this problem.
You could make a temporary copy of the config.properties for the device2 to use and delete it later.
DEVICE 1:
#echo off
:: script for updating property files
SETLOCAL EnableExtensions
SETLOCAL EnableDelayedExpansion
if "%3"=="" (
ECHO Script will optionally accept 3 args: PropKey PropVal File
SET PROPKEY=Deviceid
SET PROPVAL=dfs2341f
SET FILE=config.properties
::make a temporary copy of config.properties
copy config.properties config2.properties
) ELSE (
SET PROPKEY=%1
SET PROPVAL=%2
SET FILE=%3
)
FINDSTR /B %PROPKEY% %FILE% >nul
IF %ERRORLEVEL% EQU 1 GOTO nowork
MOVE /Y "%FILE%" "%FILE%.bak"
FOR /F "USEBACKQ tokens=*" %%A IN (`TYPE "%FILE%.bak" ^|FIND /N /I "%PROPKEY%"`) DO (
SET LINE=%%A
)
FOR /F "tokens=1,2* delims=]" %%S in ("%LINE%") DO SET LINE=%%S
SET /A LINE=%LINE:~1,6%
SET /A COUNT=1
FOR /F "USEBACKQ tokens=*" %%A IN (`FIND /V "" ^<"%FILE%.bak"`) DO (
IF "!COUNT!" NEQ "%LINE%" (
ECHO %%A>>"%FILE%"
) ELSE (
ECHO %PROPKEY%=%PROPVAL%>>"%FILE%"
ECHO Updated %FILE% with value %PROPKEY%=%PROPVAL%
)
SET /A COUNT+=1
)
GOTO end
:nowork
echo Didn't find matching string %PROPKEY% in %FILE%. No work to do.
pause
:end
DEVICE2.bat:
#echo off
:: script for updating property files
SETLOCAL EnableExtensions
SETLOCAL EnableDelayedExpansion
if "%3"=="" (
ECHO Script will optionally accept 3 args: PropKey PropVal File
SET PROPKEY=Deviceid
SET PROPVAL=dfs2341f
::changed config.properties to config2.properties
SET FILE=config2.properties
) ELSE (
SET PROPKEY=%1
SET PROPVAL=%2
SET FILE=%3
)
FINDSTR /B %PROPKEY% %FILE% >nul
IF %ERRORLEVEL% EQU 1 GOTO nowork
MOVE /Y "%FILE%" "%FILE%.bak"
FOR /F "USEBACKQ tokens=*" %%A IN (`TYPE "%FILE%.bak" ^|FIND /N /I "%PROPKEY%"`) DO (
SET LINE=%%A
)
FOR /F "tokens=1,2* delims=]" %%S in ("%LINE%") DO SET LINE=%%S
SET /A LINE=%LINE:~1,6%
SET /A COUNT=1
FOR /F "USEBACKQ tokens=*" %%A IN (`FIND /V "" ^<"%FILE%.bak"`) DO (
IF "!COUNT!" NEQ "%LINE%" (
ECHO %%A>>"%FILE%"
) ELSE (
ECHO %PROPKEY%=%PROPVAL%>>"%FILE%"
ECHO Updated %FILE% with value %PROPKEY%=%PROPVAL%
)
SET /A COUNT+=1
)
GOTO end
:nowork
echo Didn't find matching string %PROPKEY% in %FILE%. No work to do.
pause
::delete the temporary config2.properties
del /f /q config2.properties
:end
hope that helps!
Hi I have a pipe | delimited file.
I need to reverse all the numbers in there
The file looks like this
Entity|Division|Channel|200|300|800
I need to read the file an create a new one with reversed numbers
Entity|Division|Channel|-200|-300|-800
trying to make this work but, not entirely sure how to amend the text I'm getting. I need help on the :processToken procedure. How to output the tokens into a new file and add "-" and add back the delimiter |
for /f "tokens=* delims= " %%f in (M:\GPAR\Dev\EQ\Upload_Files\eq_test.txt) do (
set line=%%f
call :processToken
)
goto :eof
:processToken
for /f "tokens=* delims=|" %%a in ("%line%") do (
)
if not "%line%" == "" goto :processToken
goto :eof
Thanks
#echo off
set "ent_file=c:\entity.txt"
break>"%tmp%\rev.txt"
for /f "usebackq tokens=1,2,3,4,5,6 delims=|" %%a in ("%ent_file%") do (
echo %%a^|%%b^|%%c^|-%%d^|-%%e^|-%%f
)>>"%tmp%\rev.txt"
move /y "%tmp%\rev.txt" "%ent_file%"
del /q /f "%tmp%\rev.txt"
Should work if your file contains only lines like the one you've posted.
EDIT output the part after the 6th token:
#echo off
set "ent_file=c:\entity.txt"
break>"%tmp%\rev.txt"
for /f "usebackq tokens=1,2,3,4,5,6,* delims=|" %%a in ("%ent_file%") do (
echo %%a^|%%b^|%%c^|-%%d^|-%%e^|-%%f|%%g
)>>"%tmp%\rev.txt"
move /y "%tmp%\rev.txt" "%ent_file%"
del /q /f "%tmp%\rev.txt"
#echo off
setlocal EnableDelayedExpansion
set digits=0123456789
(for /F "delims=" %%f in (eq_test.txt) do (
set "input=%%f"
set "output="
call :processToken
set /P "=!output:~1!" < NUL
echo/
)) > new_file.txt
goto :EOF
:processToken
for /F "tokens=1* delims=|" %%a in ("%input%") do (
set "token=%%a"
set "input=%%b"
)
if "!digits:%token:~0,1%=!" neq "%digits%" set "token=-%token%"
set "output=%output%|%token%"
if defined input goto processToken
exit /B
I have one file located at C:\Users\abc\Desktop named BUIBNESSDATE.
File contents are
Updated on :
Thu Jan 23 04:05:00 IST 2014
ProfileBusinessDate=23/1/2014
NucleusBusinessDate=23/01/2014
I want script which will check if both have same date(ProfileBusi nessDate & NucleusBusinessDate )date are same. If both date are same then script should give message as OK else NotOk.
how to do?
Test this:
#echo off
set "file=C:\Users\abc\Desktop\BUIBNESSDATE"
for /f "tokens=2 delims==" %%a in (' find /i "profile" ^< "%file%" ' ) do set "p=%%a"
for /f "tokens=2 delims==" %%a in (' find /i "nucleus" ^< "%file%" ' ) do set "n=%%a"
if "%p%"=="%n%" (echo OK) else (echo NotOK)
#ECHO OFF
SETLOCAL
SET "ppd="
SET "nbd="
FOR /f "delims=" %%a IN (q21312106.txt) DO (
SET "line=%%a"
CALL :process
)
IF NOT DEFINED ppd ECHO ProfileBusinessDate missing&GOTO :EOF
IF NOT DEFINED nbd ECHO NucleusBusinessDate missing&GOTO :EOF
FOR /f "tokens=1-3delims=/" %%a IN ("%ppd%") DO CALL :slz ppdd %%a&CALL :slz ppdm %%b&CALL :slz ppdy %%c
FOR /f "tokens=1-3delims=/" %%a IN ("%nbd%") DO CALL :slz nbdd %%a&CALL :slz nbdm %%b&CALL :slz nbdy %%c
IF "%ppdd%-%ppdm%-%ppdy%"=="%nbdd%-%nbdm%-%nbdy%" (ECHO OK) ELSE (ECHO NotOk)
GOTO :EOF
:process
SET "$1=%line:*ProfileBusinessDate=%"
IF NOT "%$1%"=="%line%" SET "ppd=%$1:~1%"&GOTO :EOF
SET "$1=%line:*NucleusBusinessDate=%"
IF NOT "%$1%"=="%line%" SET "nbd=%$1:~1%"&GOTO :EOF
GOTO :EOF
:: suppress a leading 0
:slz
SET "$1=%2"
IF "%$1:~0,1%"=="0" (SET "%1=%$1:~1%") ELSE (SET "%1=%2")
GOTO :eof
Should do the task. I used q21312106.txt with your data as a source file.
#echo off
setlocal enableextension disabledelayedexpansion
set "pdb="
set "nbd="
for /f "tokens=1,2 delims==" %%a in (
'findstr /b /l /c:"ProfileBusinessDate=" /c:"NucleusBusinessDate=" "c:\users\abc\desktop\buibnessdate"'
) do (
if "%%a"=="ProfileBusinessDate" (set "pbd=%%b" ) else (set "nbd=%%b")
)
if "%pdb%"=="%nbd%" (
echo OK
) else (
echo NOT OK
)
Search the file for the required lines, splitting them on equal sign and assigning the values to the adecuated variables. Then check if both variables hold the same content.