$ shopt -q login_shell && echo 'Login shell' || echo 'Not login shell'
Login shell
$ type rvm | head -n 1
rvm is a function
-bash: type: write error: Broken pipe
However:
$ rvm --default use 1.9.2
RVM is not a function, selecting rubies with 'rvm use ...' will not work.
You need to change your terminal emulator preferences to allow login shell.
Sometimes it is required to use `/bin/bash --login` as the command.
Please visit https://rvm.io/integration/gnome-terminal/ for a example.
I removed ~/.rvm/ and tried installing again using curl -L https://get.rvm.io | bash -s stable --auto but that doesn't help.
It's a remote Ubuntu 13.04, that I have ssh'd into, authenticating with keys. Any advice?
I was sourcing the ~/.rvm/bin/rvm script twice. In the process of uninstalling and reinstalling, it once happened to not modify ~/.bash_profile. I then did this manually. A second uninstall/re-install dance then produced a ~/.bash_profile of:
source ~/.bashrc
# (lines added by me)
if [ -f /ubuntu/.rvm/bin/rvm ]; then
source '/ubuntu/.rvm/bin/rvm' > /dev/null
fi
# (lines added by RVM installer using: curl -L https://get.rvm.io | bash -s stable --auto-dotfiles)
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
Related
I am attempting to install RVM and a few gems from a single bash script that I use to bootstrap a new development box. My goal is to have a single script I can run on a clean install of OSX to install any and everything I use for development.
After installing RVM, I am sourcing the $HOME/.rvm/scripts/rvm script, however in the next line, when I attempt to install a specific version of ruby, it says rvm is not found. Here is my script.
gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3
curl -sSL https://get.rvm.io | bash -s stable --autolibs=homebrew
source "$HOME/.rvm/scripts/rvm"
rvm install 2.1.1
rvm use 2.1.1
gem install jekyll
gem install tmuxinator
gem install scss-lint
I can't understand why this isn't working, because if I run each command individually in the terminal, everything works great.
Any ideas on a 1 script solution to install RVM, a specific version of Ruby, and a few gems?
If you look in .bashrc after RVM they have:
export PATH="$PATH:$HOME/.rvm/bin" # Add RVM to PATH for scripting
What I would do overall for cleanliness
gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3
curl -sSL https://get.rvm.io | bash -s stable --autolibs=homebrew
if [[ -s "$HOME/.rvm/scripts/rvm" ]]; then
. "$HOME/.rvm/scripts/rvm"
else
echo "$HOME/.rvm/scripts/rvm" could not be found.
exit 1
fi
export PATH="$PATH:$HOME/.rvm/bin"
rvm use 2.1.1 --default --install
for i in jekyll tmuxinator scss-lint; do gem install $i; done
You may need to add "source ~/.rvm/scripts/rvm" to your ~/.bash_profile file.
echo "source $HOME/.rvm/scripts/rvm" >> ~/.bashrc
To install rvm:
rm -rf ~/.rvm
curl -L https://get.rvm.io | bash -s stable
In your script type:
type_rvm=$(type rvm | head -n 1)
echo "type rmv: $type_rvm"
You could try export rvm:
export PATH=$PATH:/opt/rvm/bin:/opt/rvm/sbin
I found a solution after reading through another stack overflow post.
A comment to one of the answers suggested makeing sure the script runs with bash and not sh. That was my problem. After changing the top line of my script (which wasn't included in my example) from #!/bin/sh to #!/usr/bin/env bash, everything worked as expected.
Really, I don't know what happened. Excuse me if this question is so NOOB, but I can't find the solution for this problem.
-bash: rvm: command not found
I tried this
curl -L https://get.rvm.io | bash -s -- --version latest
but still nothing I need to see the ruby version for use the simplecov because it not works with older version from 1.9
It might because the terminal not having rvm shell configuration loaded.
Try following from your terminal:
$ source ~/.rvm/scripts/rvm
then
$ type rvm | head -n 1
If the output is:
rvm is a function
You may need to add "source ~/.rvm/scripts/rvm" to your ~/.bash_profile file
you need to read all the texts that are displayed when you install RVM:
rm -rf ~/.rvm
curl -L https://get.rvm.io | bash -s stable
after you run sudo curl -L https://get.rvm.io | bash -s stable --ruby
you need to close the terminal ,then open again!
This worked for me:
rm -rf ~/.rvm
curl -L https://get.rvm.io | bash -s stable
source /etc/profile worked for me.
For a long-term solution, you should add this to your ~/.profile file:
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"
to simply load rvm into a single terminal, use
source "$HOME/.rvm/scripts/rvm"
supposedly this call is more cross-platform:
. "$HOME/.rvm/scripts/rvm"
As suggested by #mpapis, Do this first
$ rm -rf ~/.rvm
$ curl -L https://get.rvm.io | bash -s stable
Then, as suggested by #peterpengnz, do this and you should be fine with RVM cmd issues
$ source ~/.rvm/scripts/rvm
Close and restart terminal after installing RVM — gets me EVERY TIME.
To start using RVM, you'll need to enter source /Users/yourusername/.rvm/scripts/rvm into your terminal (of course, insert your real username in place of yourusername).
Close and reopen your terminal. Sometimes, the changes made during the installation of rvm are not immediately picked up by your terminal, so reopening it should resolve the problem.
After installing rvm, using the following:
$ curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer > rvm-installer
$ bash rvm-installer
I did the following as advised in the rvm site:
$ echo '[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # Load RVM function' >> ~/.bash_profile
$ source .bash_profile
-sh: is_a_function: command not found
When I looked up the installation output, I see that this error has been reported during the installation too (though I also see: "Installation of RVM to /Users//.rvm/ is complete.")
I looked up the rvm scripts and I am able to see the function is_a_function in utility script.
Please advise on what I need to do now to fix this.
P.S.: I had to download the installer locally since I kept getting the following error:
$ bash < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer)
-sh: syntax error near unexpected token `<'
I was getting the same error, but switching to stable version seems to have fixed it.
Did work:
sudo bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer)
I followed the instructions from the RVM homepage (https://rvm.beginrescueend.com/rvm/install/)
I typed the following:
sudo bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer )
the script executed and didn't seem to give any errors.
the same without sudo gave an error:
Warning: Failed to create the file
Warning: /usr/share/ruby-rvm/archives/wayneeseguin-rvm-stable.tgz: Permission
Warning: denied
0 792k 0 3908 0 0 2257 0 0:05:59 0:00:01 0:05:58 2257
curl: (23) Failed writing body (0 != 3908)
Could not download 'https://github.com/wayneeseguin/rvm/tarball/stable'.
curl returned status '23'.
I also put this in my ~/.bashrc
echo '[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm"
what I get is:
~$ type rvm | head -1
bash: type: rvm: not found
~$ source "/usr/local/rvm/scripts/rvm"
bash: /usr/local/rvm/scripts/rvm: No such file or directory
~$ source "$HOME/.rvm/scripts/rvm"
bash: /home/anonym/.rvm/scripts/rvm: No such file or directory
How can this be fixed?
PS
I'm using Ubuntu 11.10
Sudo problems. This worked for me to install rvm. Just do:
curl -L https://get.rvm.io | sudo bash -s stable --ruby
nano ~/.bashrc
at the bottom of the file add these line
unset rvm_path
unset GEM_HOME
Then run
curl -L https://get.rvm.io | bash -s stable
source ~/.rvm/scripts/rvm
echo "source ~/.rvm/scripts/rvm" >> ~/.bashrc
rvm install 2.1.3
rvm use 2.1.3 --default
ruby -v
Can you try this:
$ curl -s raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer | bash -s stable
or
$ curl -s raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer | sudo bash -s stable
depending on your permissions. That should help. It helped me! :)
I'm sure there's a more elegant way to fix this, but I ran into the same issue and was kinda in a hurry, so I went for a quick and dirty workaround:
$ curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer > foo.sh
$ chmod 755 foo.sh
Then edit line 162, and add -k to the curl command:
$ vim foo.sh
162 if curl -Lk https://github.com/${_repo}/rvm/tarball/${_branch} -o ${rvm_archives_path}/${_repo}-rvm-${_branch}.tgz
Then run the script:
$ ./foo.sh --branch stable
Like I said, not ideal, but it got me where I needed to be quickly.
If anyone has this problem in the future in ubuntu I was getting this error because of an old package that still had config stuff hanging around.
Try running
sudo apt-get --purge remove ruby-rvm
That should take care of the permission error and let you install RVM as a normal user under $HOME/.rvm
Put this in your .bashrc instead (without echo)
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"
And restart your terminal.
You might have RVM installed under the wrong user. RVM won't let you install if it's installed under another user.
You can uninstall it from the other user with rvm implode.
Log over to the other user and RVM will install correctly!
https://rvm.io/rvm/security#ipv6-issues
You can forbid gpg's internal dirmngr from using IPv6 by add the following line to ~/.gnupg/dirmngr.conf:
How to install RVM on lion, I am trying this command in terminal
curl -s https://rvm.beginrescueend.com/install/rvm
After this command executed it gives me a lot of text in terminal, the text is ending with this statement
chmod +x ./scripts/install
# Now we run the RVM installer.
./scripts/install ${flags[*]} --prefix "$rvm_prefix" --path "$rvm_path"
After it finish executing I tried rvm command but its giving me error command not found
Are you running only curl -s https://rvm.beginrescueend.com/install/rvm in terminal? This only displays the content of the script.
If you want to install it you need to run something like this(assuming you are using bash):
bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer)
Copied from:
http://ruby.about.com/od/rubyversionmanager/ss/Installing-Ruby-On-Snow-Leopard-With-Rvm_6.htm
Now that the RVM scripts are installed, you need to load them every
time your start a new Bash session. This is achieved by adding a line
to the end of your ~/.bash_profile file. You can add this line with
your favorite text editor, or by using the cat command. Just hit
Ctrl-D after you've typed the line and it will write that line to the
file and return you to the bash prompt.
$ cat >>~/.bash_profile
[[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm"