The issue I am hitting affects both the Visual Studio 2012 & Visual Studio 2013 Windows Simulators since upgrading to Windows 8.1.
When I try launch it (in either in Visual Studio or externally by launching the exe) I get the following error message: Client policy does not allow credential delegation to target server
The odd part is that is only occurs on my work wireless and if if I disconnect the wireless, then it works fine. It does not occur on my home wireless.
I found a similar issue with VPN's but I don't have any VPN's setup & the machine is not domain joined so I do not suspect an actual group policy.
Any ideas on what the cause for this could be?
There are a few credentials that prevent the Windows Simulator from starting on Windows 8.1. Run "control keymgr.dll" to open the windows credentials manager, then view the Windows Credentials. If you have any of the following you will need to remove them:
"",
"termsrv/",
"localhost",
"termsrv/localhost",
"*session"
In the RTM build of VS 2013 there should be a more helpful error message in this scenario.
Related
I have been facing the same issue as asked in this other post
Visual Studio 2015 Windows Phone Emulator not deploying
but the solution worked here is not working for me.
Windows 10 pro upgraded from home version
Visual Studio 2015
Apache Cordova "Sample" app.
In Emulator it is showing as "Starting
in the behind "Hyper-V" "Summary" it is visible but if double click the the Hyper-V "instance" it is not visible there but only in "Summary"
What am I missing here?
For the developer sake and investment, MS must make sure that the solutions are tested everywhere before releasing them.
This link will direct you to print screen of the error. https://prnt.sc/cykrgg
in the VS output we get the following last message.
My OS is 64 bit.
2>The build configuration was changed to x86 for x86-based emulator deployment.
could this be impact of 64 to 86 bit version difference or anything else?
I have Norton antivirus
I am getting
Hyper-v administrator pop up every time I try to run the app.
This case is resolved by Microsoft Support Team over a Ticket and Rohit, support engg from MS did really helped me a lot.
The reason why it was not coming up.....
My machine has a AdWareAntiVirus from Lavasoft by Name WebCompanion that was not allowing it work.
I removed it then it started working.
if any body have any problem with VS 2015 Emulator definitely focus on the Antivirus and include the Emulator XDE into exception list and also include in Firewall.
Thanks,
Ekambar
There were errors in VS2013 when a Windows Phone 8.1 App is launching for deploy and debug:
Error 1 Error : DEP6100 : The following unexpected error occurred
during boostrapping stage 'Connecting to the device':
SmartDeviceException - Deployment failed because no Windows Phone was
detected. Make sure a phone is connected and powered on. AppWP
Error 2 Error : DEP6200 : Boostrapping 'Device' failed. Device cannot
be found. Deployment failed because no Windows Phone was detected.
Make sure a phone is connected and powered on. AppWP
After performing of many method trying to eliminate this problem (disabling firewall, reinstalling SDKs, updating Lumia 930 to the latest Windows Phone developer preview), I managed to deploy and run an app with debugging. And as topic says, deploying and debugging is possible only with disabled WiFi on the Phone.
After enabling WiFi on the Lumia 930 device while connection of VS-debugger/PowerTools is established, then the debugging session stays connected and working. But if I disconnect Windows Phone Developer Power Tools (8.1) and try to connect again (while WiFi is enabled), it says:
Power Tools can't communicate with the device. Here's the error message:
0x80131600 - 0x80131500 - 0xC0000374
Visual Studio can deploy and start a new debug session after enabling of WiFi even after restarting of a VS2013.
But, after restarting the Windows Phone IP over USB Transport (IpOverUsbSvc) service, VS2013 becomes unable to deploy and debug again until WiFi is disabled again.
That's how it behaves.
UPDATE: After updating to Lumia Denim, the bug was fixed.
I have solved it with the following steps:
Open Windows Search, search for "services".
Find the Service “Windows IP over USB Transport (IpOverUsbSvc)”.
Alter initialization type for automatic and click mouse right button and select Start.
Try running !
I put this answer on another post but I guess some did not feel it was an appropriate answer because I didn't find the exact cause - Can't deploy window phone apps to Emulator. Error DEP6100 & 6200. I see that you are having a few issues that I did not originally have but overall I was having weird symptoms. Below is what I did to remedy the DEP6100 and DEP 6200 errors.
I'll start by saying that reloading Visual Studio 2013 and Windows Phone SDK 8.0 did not fix my issue. What did correct my issue was creating a blank project within the Visual Studio Express 2012 for Windows Phone and deploying the project. Then I went into Visual Studio 2013 and tried deploying my project again and voila, it worked. Why, I have no idea but my guess is there is a file or configuration that is set up by VS Express 2012 for WP that has been missed in the VS 2013 with built in WP SDK.
I had a similar experience with VS 2013 where I could not connect the debugger to the device AND the app would crash out with WIFI enabled (emulator was fine)
I solved these problems by installing VS2015 Enterprise RC
I am facing a strange issue with Windows Phone Emulators for last a few days. When I try to run any windows phone application from Visual Studio 2013/2012, it initially starts the emulator and then stops with an error displayed in the error window inside visual studio:
Error : DEP6100 : The following unexpected error occurred during boostrapping stage 'Connecting to the device':
SmartDeviceException - App deployment failed. Please try again.
I have been trying many solutions in order to fix this issue but nothing helped. At last I re-installed the whole windows 8.1 and then visual studio 2013. Then I created a windows phone 8 application and run it smoothly in windows phone emulator.
Then I installed all windows updates including windows 8.1 update 1. After that I installed the visual studio 2013 update 2. Now if I run any new/existing windows phone 8/8.1 project I get the same error again. Seems like there is something wrong with windows 8.1 updates or visual studio 2013 update 2.
Any help?
Open network and sharing center
Change adapter settings
Check if vEthernet [Windows phone emulator internal switch is enabled)
Try deploying it to the emulator now
If above does not work
Delete the virtual switch(s) if any and do a deployment
If it still does not work, connect to the internet via a LAN
Keep you’r wifi on
do a deployment to the emulator
Most cases above method worked !
I had the same error when i tried switching the target OS version of my app from Windows Phone 8 to 8.1. With 8.1 you get a new manifest file and if, for app or publisher identification string, you have different values in one manifest file than in the other, it will output that exact error when trying to start the app in the emulator. However after searching the web back when i had that error, this error seems to have quite a bunch of possible sources, this being only one among many other, but be sure to check it.
Uninstalling the symantec antivirus fixed my issue.
Step1: Installed VisualStudio 2013 Express for Windows along with
Update 2.
Step2: Created a blank Windows Phone App.
Step3: Deployed the app to the Emulator 8.1 WVGA 4 inch 512MB.
The Emulator Displays with the message 'Windows Phone is Starting'. Times out after about 5 minutes with the following error messages:
Error: DEP6100: The following unexpected error occurred during
bootstrapping stage 'Connection to the device':
Error: DEP6200: Bootstrapping 'Emulator 8.1 WVGA 4 inch 512MB' failed.
Device cannot be found. App deployment failed. Please try again.
Hyper-V Manager shows the phone emulator running when the app is deployed to the
Phone Emulator.
Running my existing phone 8.0 apps with VisualStudio 2012 Professonal through the
phone emulator stopped working after installing VisualStudio 2013 Express with Update 2.
I get this error:
Windows Phone Emulator is unable to connect to the Windows Phone
operating system:
The phone did not respond to the connect request.
Some functionality might be disabled.
Tried running as administrator and repairing VisualStudio 2013 Express with no effect of this problem.
Anyone having similar issues ?
I solved this problem just now. Please take all windows update. Reboot, and check again for any remaining update. This was a bug earlier as well so microsoft fixed it in first update of windows 8.1
Then check any remaining extension update for your visual studio 2013. update there as well.
Try opening a sample app, it should work.
Regards
Kajal
I had same problem . first i fixed it with:
Updating windows
Uninstall / install Windows Phone SDK 8
Remove and add Hyper-v again ( maybe it is not necessary )
But problem came back and instead of previous solution i fixed the issue with :
going to windows firewall and then click on "restore defaults"
Open Hyper-V manager. Look at all the emulators that are running and turn them all off.
Then open visual studio and deploy your app.
This will start a fresh instance of Emulator.
I had the same problem with VisualStudio 2013 Professional and the latest Windows Phone 8.1 SDK and emulators (as of December 2014).
In my case I fixed it by changing the virtual switch 'WinPhoneEmulatorSwitch' in Hyper-V Manager from 'Internal network' to 'Private network'.
I found this solution at pekari.wordpress.com
I had your same problem and after many attempts resolved it this way:
Deactivate Hyper-V (and restart computer);
Go in the Device Manager and open the Network Adapters, here uninstall everything with the name "Hyper-V...", this will allow us to reactivate Hyper-V without any conflict;
Enable Hyper-V (and restart computer);
Finally launch the emulator (if it is the first time you launch it you will have to wait 5-10 minutes, so be patient and wait for it to load all apps it need).
I am trying to remote debug my application in VMware workstation 7 and Visual studio 2010 ultimate. I habe several images (win 7 ultimate,vista,etc).
I am following this tutorial: http://kristofmattei.be/2010/01/20/debugging-applications-in-virtual-machines-with-vmware-workstation-7-and-visual-studio-2008-sp1-2/
Whenever I try to start msvsmon.exe on the remote computer it will say :
"The visual studio remote debugger does not support this edition of windows"
tried it with win 7 ultimate, vista premium and xp home, same situation.
Could someone help me out here?
Thanks!
The error message "The visual studio remote debugger does not support this edition of windows" appears because the remote debugger tries to use Windows Authentication by default, and this is only supported in the "Pro" versions of Windows, and up.
However, the remote debugger does work with the "Home" versions of Windows, you just have to tell it not to use authentication via the command line.
(Why it doesn't let you do this after launching it without any arguments, why the error message is so misleading (and contradicts the official list of supported OS), and why there is so little info about this on the web, I don't know. :))
To launch it, run this:
msvsmon.exe /noauth /nosecuritywarn
Of course, this launches it in the lowest security mode, so you'd only want to do this on a secure network. (But that's usually the mode one ends up using msvcmon in anyway, as the other mode is an even bigger PITA to set up than it is normally. Very useful tool, but really could use some streamlining.)
No need to use VMWare features.
Inside the guest VM run the version of msvsmon that came with your copy of visual studio 2010 (A setup package for just the remote deubgging stuff can be found on the disc/image) (use x86 if debugging a 32-bit process or x64 if debugging 64-bit one ,Itanium if you need to laugh).
through the msvsmon GUI disable authentication and select allow any user to connect.
disable the firewall in the VM.
on the host machine you should be running visual studio 2010, under the debug dropdown select "attach to process..." and then on the window that pops up select remote from the dropdown that should say local or something initially, enter the IP address (should be private network IP i.e. 10.1.?.?) of the guest VM, alternatively use the server name displayed by the msvsmon GUI. You should get the process list for the guest and should only attach to any process that matches the version of msvsmon you ran (x86 or 64 ...or Itanium laugh).
NOTE: These are basic instructions to show you it definitely works but these instructions will only work for native code since managed requires a secure connection.
If you are debugging a .NET app using the VMWare VS Plugin and are getting a "file not found" type of error...make sure you have the .NET runtime installed! :)
Like a moron, I set up a fresh XP VM and forgot to install the .NET runtime and wasted a good day trying to get the VMWare VS Plug-In to work!
VSID is not supported by visual studio2010 http://communities.vmware.com/thread/282407