I am working in Visual Studio 2010 with Team Foundation Server 2010. Everything was fine with the check in and check out. Now I am stuck with a problem. The problem is .csproj file is missing while showing the pending changes. Because of this when I check in any .cs file it is not updated in server. Can anyone say me in what way I am going wrong?
The first thing you should do is install TFS power tools. My suspicion from what you've said is that the csproj file is not under source control, and the easiest way to get it in is via power tools.
In order to validate that this is the case, open the source control explorer and look in your repository for the csproj file. My guess is that you won't find it. If you don't then navigate to it in explorer, right click and select add to source control.
(You can do this without power tools, just select add files and navigate to it)
I had the same problem and then found the .csproj under "Excluded changes" via the "Detected xx add(s)" link. I could "promote" it so it got visible in the "Included changes".
Related
I have a problem with my team foundation server whenever I change something in the project and then check it in other visual studio can't see the changes when they get latest version of the file or entire project but the change is available in the Source Control Explorer but not in the solution explorer.
I use Team Foundation Server 2013 and Visual Studio 2013 Ultimate.
If the file exists on disk (physically in the folder) but does not show in the solution then it is likely that the file was checked in, but the modification to the solution was not.
On the solution explorer there is a "show all files" button at the top of the page. If you click it you should see the file grayed out. Right click on it and add it to the solution with the "include in project". Now check in the change to the project file.
Everyone will now see it added.
You need to find who is adding files and not checking in the solution. I find a rolled up newspaper is most suitable to rectifying the issue permanently.
I'm using Team Foundation Server 2010 with Visual Studio 2010.
Whenever I modify a file outside of Visual Studio, TFS doesn't seem to detect the change done to the file, and thus doesn't offer me the option to check-in the file after it has been modified.
How can this be solved?
TFS has a "Reconcile" command for this:
Open the Source Control Explorer
Right-click on the folder with the changes and choose Compare
Select the files you want to reconcile (press CTRL+A to select all files)
Click on the Reconcile button
Set the options in the Reconcile Folder Differences dialog. Make sure Files that do not have pending changes is set to Check Out
Click OK
If you have local changes the Check Out dialog will be shown. Set the preferred Lock type
Click Check Out
See also: Reconcile differences between folders
If you have a network connection to your server while you're working outside of Visual Studio, it's probably best to go ahead and check the file out before editing it, either using the tf command line client, or using the Windows Explorer shell integration that's available in the TFS Power Tools release. (Plus an increasing number of other tools have TFS integration that makes this automatic, but if you're just using notepad, this still needs to be a manual step.)
Of course, there are many times when you're working and you don't have a network connection available that allows you to check out the files.
If you know what files you've modified, you can just check them out from within Visual Studio, then you'll be able to check them back in.
If you don't know what files you've edited, you can detect the changes by running the tfpt online command (also part of the Power Tools release). This will locate the files that have been modified locally and check these files out from the server.
This worked for me, using the TFS Power Tools:
tfpt online /adds /deletes /diff /noprompt /recursive directory-name
(where directory-name is the path to the directory to be updated, otherwise it will detect changes throughout your entire TFS repository)
If you want to know what it would do without it actually making any changes, you can force it to do a dry run by adding the /preview switch.
*1- make changes outside of Visual Studio
2- go to Visual Studio and open Source Control Explorer
3- right click on the folder > "Check Out for Edit" > "Check Out"
4- right click on the same folder > "Undo Pending Changes..." > "Undo changes" > "No to All"*
I tested this workaround on a branch and it helped me a lot. But there are only new files and new folder who has to be done manually.
I recommend to create a branch before the operation. It isolates you the time of the operation.
Note: This technique does also the files identical cleanup that TFS always marks as modified.
Try this. It's some sort of workaround, but it works:
make changes outside of Visual Studio
go to Visual Studio and open Source Control Explorer
right click on the folder > "Check Out for Edit" > "Check Out"
right click on the same folder > "Undo Pending Changes..." > "Undo changes" > "No to All"
That's it. The changes are visible now.
There's also another solution to get TFS to figure out the files that have changed outside of Visual Studio:
Open the solution offline
In Solution Explorer select the solution file and then press the Go Online button ()
TFS will automatically scan the solution for changes after this.
Step one can be achieved in a number of different ways. Here are some:
Use the GoOffline Extension - very simple and effective.
If you're asked for TFS credentials when opening the solution (no automatic domain auth), then don't enter the credentials. The solution will open offline and you'll login after pressing the Go Online button
(extreme solution) Disconnect your network cable; Open the solution; Connect the network cable.
Visual Sourcesafe works like this too and the way I get VSS or TFS to notice the change is by checking the file out once inside Visual Studio.
Open Source Control and go to your TFS folder. Right-click on the folder and choose 'Compare'.
Notice that your edited files show up marked in red.
I find this is better than tfpt online which also gets you files that are not readonly and not edited.
I had this problem in the past, when my Internet was down and I worked offline, and most of my changes didn't appears in Team Explorer.
Following these steps:
First, In the solution explorer, select the folder that you want to re-conciliate (for me, it was my entire solution folder), and select Compare...
Click in Modify Filter, and in the filter text-box, you could type:
*.cs;!obj\;!bin\;!packages\;
In this example, it will include in the search only C# files and exclude in the folders: bin, obj and packages.
Notice the column Pending Change has the info whether the file is marked as edit, add, etc... or nothing...
To mark as edit (when the local item has a matching server item), select the file and choose Check out for Edit...
To mark as add (when the local item doesn't have any server item), select the file and choose Add Files
Finally, I am not sure why the projects are not listed here (after I remove *.cs filter, still doesn't show up), so rebuild the solution to make sure the projects updates as well
+ In the solution, click the connect button (if shows up) that said Go Online.
I found that in Visual Studio 2015, with the project open, Visual Studio discovered for itself that files had been modified externally, and automatically checked them out without me having to do anything. Checking in the project in the normal way saved the external modifications.
In my case, the following worked (at least the one time I tried it):
Go to the Pending Changes panel
Select View Options under either Included or Excluded changes.
Switch between Show All and Show Solution Changes
Switch back if desired
Changing the View Option appears to force a refresh of modified files.
There's a question already discussing how to add project/solution bindings to TFS, however it seems to only apply to Visual Studio 2008 (I am unable to find the "Change Source Control" dialog in VS2010).
I have a solution and source code on my local machine already in TFS, however it does not have TFS bindings (the thing that produces the padlock icon in the Visual Studio Solution Explorer and allows automatic checkout).
How can I add bindings to an existing TFS project using Visual Studio 2010?
In VS2010 check Tools>Options>Source Control and see if set to TFS. If not that might be why you don't see File->Source Control->Change Source Control.
I ran into this problem and, for me, the issue was that my solution was offline with respect to TFS. Upon trying to change source control, I received a message stating that it is already associated with source control but is offline. I placed the solution on-line, per my recollection, using the File->Source Control->Go Online menu option and this seemed to fix the problem.
Go to the source control explorer under Team Explorer, where you can see your repository. Right click on the top folder that maps to the folder on your local machine. There's an option called "Map to local folder". Map this to the folder on your local machine. This will set up all the bindings for TFS for your project.
I had the same problem and the following steps solved it for me in VS 2008.
Unfortunately, I didn't record the exact steps and don't want to add a new project to our TFS to try again, so the steps are from memory.
Go to File Menu -> Source Control -> Open from source control
Select solution file from TFS hierarchy
Accept any warning about project already being on local disc
A popup dialog comes up saying something along the lines "This solution is already under source control, but no bindings exist. Do you want to add them?"
A selector shows all projects in a grid and allows adding the required bindings. Add TFS server setting to each project (select all lines in grid at once and press a button at the top. I can't remember what it was called, but it was fairly obvious).
I have a solution with solution folder and projects.
Get the whole soure code from TFS in a local folder say c:\mycodes
Then copy the folder c:\mycode to another folder c:\lab
In c:\lab, remove all source control file *.vssscc, *.vspscc, then open the solution in c:\lab again.
Part of the project disconnect from TFS, but part of the projects in this solution still connect to TFS and some *.vssscc, *.vspscc files recreated when open the solution. Then unbind all project from server, those projects still have *.vspscc files auto generated.
I want to a clean copy of the source code with no source control. How to resolve this problem?
In Visual Studio, select the solution in the solution explorer, then go to the File menu. Under the file menu, you'll see a Source Control menu. Under that you'll see Change Source Control.
Select this, and in the dialog box that comes up, choose "unbind."
Your solution is no longer bound.
Delete *.vssscc, *.vspscc, files .
Open .sln file on notepad. Delete the code lines:
Code:
GlobalSection(TeamFoundationVersionControl) = preSolution
SccNumberOfProjects = 1
SccEnterpriseProvider = JKHJ78900-10FA-6457-4535-645676465463}
SccTeamFoundationServer = https://********.visualstudio.com/defaultcollection
SccLocalPath0 = .
EndGlobalSection
In VS-2013 from "Solution Explorer" select any solution. From FILE menu select Source Control->Advance->Change Source control.
In the pop-up window you can finally click unbind button for each project of the solution.
Took me a while to find from answer by #Robaticus. Sorry, can't comment yet.
visual-studio-2013
I often need to take solutions or projects out of TFS source control to send to clients without and source control bindings left behind. I use a utility from CodePlex to acheive the job. PLease refer to my blog post "How to Permanently Remove TFS Source Control Bindings from Visual Studio Solutions (VS2012)" http://camerondwyer.wordpress.com/2012/11/07/how-to-permanently-remove-tfs-source-control-binding-from-visual-studio-solutions-vs2012/
You must also edit the .sln file, because Visual Studio stores TFS Bindings mostly in this file, one line per project.
Err, wait. You'll still use some source control, right ? Even if I'm no fan of TFS, dropping it for no source control would be a poor move.
Visual Studio 2019
Here are the steps to be taken to "How to disconnect solution from source control on TFS".
Step 1)
Step 2)
Step3)
I had to do this, because I wanted to remove all information used by Azure Dev Ops and then post the project on GitHub.
I'm working on a project for a firm that has their main solution in sourcesafe. The other developers are working like beavers on new stuff, and I'd like to be able to download the source from VSS, then disconnect it. So I can get up to speed on the code without risk of bothering anyone else's code.
Is it possible to do this? Many thanks if so.
-Larry
It's been a while since the scary days of source safe, but i believe this is what you have to do. In Visual Studio, go to File -> Source Safe -> Change Source Control (?). It'll open up a new window and list projects under current solution bound to Source Safe. Select the project you want to remove and click 'Unbind' at the top. It'll remove source safe bindings from the project. If you have to bind again, just click 'Bind' and select the location in the repository to bind to.
From How to Remove Version Control Bindings from Visual Studio Solutions at devx.com:
Close all instances of Visual Studio, and delete all the files in the solution directory that end with .scc.
Edit the solution to remove all traces of the source code controller binding. Remove the section GlobalSection(SourceCodeControl) in the solution file. Also remove the keys named SccProjectName, SccLocalPath, SccAuxPath, and SccProvider.
Why don't you just make a branch?
To unbind the solution/Project from VSS:
In Visual Studio, open Solution Explorer and select a solution or project to unbind.
On the File menu, click Source Control, then Change Source Control.
In the Change Source Control dialog box, click Unbind.
Click OK.