I need to execute a shell script remotely inside the Linux box from Windows
#!/bin/bash
if [ "$#" -ne 1 ]; then
echo "Illegal number of parameters"
exit
fi
echo "$1"
Here is the command I ran from Windows command prompt
cmd> plink.exe -ssh username#host -pw gbG32s4D/ -m C:\myscript.sh 5
I am getting output as
"Illegal number of parameters"
Is there any way I can pass command line parameter to shell script which will execute on remote server?
You misunderstand how the -m switch works.
It is just a way to make plink load the commands to send to the server from a local file.
The file is NOT uploaded and executed on the remote server (with arguments).
It's contents is read locally and sent to the server and executed there as if you typed it on a (remote) command line. You cannot give it arguments.
A workaround is to generate the file on the fly locally before running plink from a batch file (say run.bat):
echo echo %1 > script.tmp
plink.exe -ssh username#host -pw gbG32s4D/ -m script.tmp
Then run the batch file with the argument:
run.bat 5
The above will make the script execute echo 5 on the server.
If the script is complex, instead of assembling it locally, have it ready on the server (as #MarcelKuiper suggested) and execute just the script via Plink.
plink.exe -ssh username#host -pw gbG32s4D/ "./myscript.sh %1"
In this case, as we execute just one command, you can pass it on Plink command line, including the arguments. You do not have to use the -m switch with a (temporary) file.
I triggered the Shell script in "commands.txt" from Plink which worked for me like a charm with below method I tried:
You can define your script as an one liner using && in a file (I defined in one liner)
You need to run your command in <
Note: Use first EOF in quote like <<'EOF' but not the last one. Else you will see you code will behave weirdly.
Please see below.
Example:
sudo -i <<'EOF'
<your script here>
EOF
Then, finally run it using Plink:
plink -ssh username#hostname -pw password -m commands.txt
Have you tried putting the command and argument in quotes:
i.e. -m "C:\myscript.sh 5"
The script test.sh
#!/bin/bash
set -x
nohup echo hello &
When run ./test.sh, output is
+ nohup echo hello
appending output to nohup.out
But when ssh is setup and run ssh localhost ./test.sh, output is nothing.
Everything is fine.
The command is executed, but you won't see the output, by that time the ssh connection was already terminated.
Check nohup.out, it will show that the command was indeed executed.
I need to execute a shell script remotely inside the Linux box from Windows
#!/bin/bash
if [ "$#" -ne 1 ]; then
echo "Illegal number of parameters"
exit
fi
echo "$1"
Here is the command I ran from Windows command prompt
cmd> plink.exe -ssh username#host -pw gbG32s4D/ -m C:\myscript.sh 5
I am getting output as
"Illegal number of parameters"
Is there any way I can pass command line parameter to shell script which will execute on remote server?
You misunderstand how the -m switch works.
It is just a way to make plink load the commands to send to the server from a local file.
The file is NOT uploaded and executed on the remote server (with arguments).
It's contents is read locally and sent to the server and executed there as if you typed it on a (remote) command line. You cannot give it arguments.
A workaround is to generate the file on the fly locally before running plink from a batch file (say run.bat):
echo echo %1 > script.tmp
plink.exe -ssh username#host -pw gbG32s4D/ -m script.tmp
Then run the batch file with the argument:
run.bat 5
The above will make the script execute echo 5 on the server.
If the script is complex, instead of assembling it locally, have it ready on the server (as #MarcelKuiper suggested) and execute just the script via Plink.
plink.exe -ssh username#host -pw gbG32s4D/ "./myscript.sh %1"
In this case, as we execute just one command, you can pass it on Plink command line, including the arguments. You do not have to use the -m switch with a (temporary) file.
I triggered the Shell script in "commands.txt" from Plink which worked for me like a charm with below method I tried:
You can define your script as an one liner using && in a file (I defined in one liner)
You need to run your command in <
Note: Use first EOF in quote like <<'EOF' but not the last one. Else you will see you code will behave weirdly.
Please see below.
Example:
sudo -i <<'EOF'
<your script here>
EOF
Then, finally run it using Plink:
plink -ssh username#hostname -pw password -m commands.txt
Have you tried putting the command and argument in quotes:
i.e. -m "C:\myscript.sh 5"
I have a script I can run locally to remotely start a server:
#!/bin/bash
ssh user#host.com <<EOF
nohup /path/to/run.sh &
EOF
echo 'done'
After running nohup, it hangs. I have to hit ctrl-c to exit the script.
I've tried adding an explicit exit at the end of the here doc and using "-t" argument for ssh. Neither works. How do I make this script exit immediately?
EDIT: The client is OSX 10.6, server is Ubuntu.
I think the problem is that nohup can't redirect output when you come in from ssh, it only redirects to nohup.out when it thinks it's connected to a terminal, and I the stdin override you have will prevent that, even with -t.
A workaround might be to redirect the output yourself, then the ssh client can disconnect - it's not waiting for the stream to close. Something like:
nohup /path/to/run.sh > run.log &
(This worked for me in a simple test connecting to an Ubuntu server from an OS X client.)
The problem might be that ...
... ssh is respecting the POSIX standard when not closing the session
if a process is still attached to the tty.
Therefore a solution might be to detach the stdin of the nohup command from the tty:
nohup /path/to/run.sh </dev/null &
See: SSH Hangs On Exit When Using nohup
Yet another approach might be to use ssh -t -t to force pseudo-tty allocation even if stdin isn't a terminal.
man ssh | less -Ip 'multiple -t'
ssh -t -t user#host.com <<EOF
nohup /path/to/run.sh &
EOF
See: BASH spawn subshell for SSH and continue with program flow
Redirecting the stdin of the remote host from a here document while invoking ssh without an explicit command leads to the message: Pseudo-terminal will not be allocated because stdin is not a terminal.
To avoid this message either use ssh's -T switch to tell the remote host there is no need to allocate a pseudo-terminal or explicitly specify a command (such as /bin/sh) for the remote host to execute the commands provided by the here document.
If an explicit command is given to ssh, the default is to provide no login shell in the form of a pseudo-terminal, i. e. there will be no normal login session when a command is specified (see man ssh).
Without a command specified for ssh, on the other hand, the default is to create a pseudo-tty for an interactive login session on the remote host.
- ssh user#host.com <<EOF
+ ssh -T user#host.com <<EOF
+ ssh user#host.com /bin/bash <<EOF
As a rule, ssh -t or even ssh -t -t should only be used if there are commands that expect stdin / stdout to be a terminal (such as top or vim) or if it is necessary to kill the remote shell and its children when the ssh client command finishes execution (see: ssh command unexpectedly continues on other system after ssh terminates).
As far as I can tell, the only way to combine an ssh command that does not allocate a pseudo-tty and a nohup command that writes to nohup.out on the remote host is to let the nohup command execute in a pseudo-terminal not created by the ssh mechanism. This can be done with the script command, for example, and will avoid the tcgetattr: Inappropriate ioctl for device message.
#!/bin/bash
ssh localhost /bin/sh <<EOF
#0<&- script -q /dev/null nohup sleep 10 1>&- &
#0<&- script -q -c "nohup sh -c 'date; sleep 10 1>&- &'" /dev/null # Linux
0<&- script -q /dev/null nohup sh -c 'date; sleep 10 1>&- &' # FreeBSD, Mac OS X
cat nohup.out
exit 0
EOF
echo 'done'
exit 0
You need to add a exit 0 at the end.
This is a follow-on question to the How do you use ssh in a shell script? question. If I want to execute a command on the remote machine that runs in the background on that machine, how do I get the ssh command to return? When I try to just include the ampersand (&) at the end of the command it just hangs. The exact form of the command looks like this:
ssh user#target "cd /some/directory; program-to-execute &"
Any ideas? One thing to note is that logins to the target machine always produce a text banner and I have SSH keys set up so no password is required.
I had this problem in a program I wrote a year ago -- turns out the answer is rather complicated. You'll need to use nohup as well as output redirection, as explained in the wikipedia artcle on nohup, copied here for your convenience.
Nohuping backgrounded jobs is for
example useful when logged in via SSH,
since backgrounded jobs can cause the
shell to hang on logout due to a race
condition [2]. This problem can also
be overcome by redirecting all three
I/O streams:
nohup myprogram > foo.out 2> foo.err < /dev/null &
This has been the cleanest way to do it for me:-
ssh -n -f user#host "sh -c 'cd /whereever; nohup ./whatever > /dev/null 2>&1 &'"
The only thing running after this is the actual command on the remote machine
Redirect fd's
Output needs to be redirected with &>/dev/null which redirects both stderr and stdout to /dev/null and is a synonym of >/dev/null 2>/dev/null or >/dev/null 2>&1.
Parantheses
The best way is to use sh -c '( ( command ) & )' where command is anything.
ssh askapache 'sh -c "( ( nohup chown -R ask:ask /www/askapache.com &>/dev/null ) & )"'
Nohup Shell
You can also use nohup directly to launch the shell:
ssh askapache 'nohup sh -c "( ( chown -R ask:ask /www/askapache.com &>/dev/null ) & )"'
Nice Launch
Another trick is to use nice to launch the command/shell:
ssh askapache 'nice -n 19 sh -c "( ( nohup chown -R ask:ask /www/askapache.com &>/dev/null ) & )"'
If you don't/can't keep the connection open you could use screen, if you have the rights to install it.
user#localhost $ screen -t remote-command
user#localhost $ ssh user#target # now inside of a screen session
user#remotehost $ cd /some/directory; program-to-execute &
To detach the screen session: ctrl-a d
To list screen sessions:
screen -ls
To reattach a session:
screen -d -r remote-command
Note that screen can also create multiple shells within each session. A similar effect can be achieved with tmux.
user#localhost $ tmux
user#localhost $ ssh user#target # now inside of a tmux session
user#remotehost $ cd /some/directory; program-to-execute &
To detach the tmux session: ctrl-b d
To list screen sessions:
tmux list-sessions
To reattach a session:
tmux attach <session number>
The default tmux control key, 'ctrl-b', is somewhat difficult to use but there are several example tmux configs that ship with tmux that you can try.
I just wanted to show a working example that you can cut and paste:
ssh REMOTE "sh -c \"(nohup sleep 30; touch nohup-exit) > /dev/null &\""
You can do this without nohup:
ssh user#host 'myprogram >out.log 2>err.log &'
Quickest and easiest way is to use the 'at' command:
ssh user#target "at now -f /home/foo.sh"
I think you'll have to combine a couple of these answers to get what you want. If you use nohup in conjunction with the semicolon, and wrap the whole thing in quotes, then you get:
ssh user#target "cd /some/directory; nohup myprogram > foo.out 2> foo.err < /dev/null"
which seems to work for me. With nohup, you don't need to append the & to the command to be run. Also, if you don't need to read any of the output of the command, you can use
ssh user#target "cd /some/directory; nohup myprogram > /dev/null 2>&1"
to redirect all output to /dev/null.
This worked for me may times:
ssh -x remoteServer "cd yourRemoteDir; ./yourRemoteScript.sh </dev/null >/dev/null 2>&1 & "
You can do it like this...
sudo /home/script.sh -opt1 > /tmp/script.out &
It appeared quite convenient for me to have a remote tmux session using the tmux new -d <shell cmd> syntax like this:
ssh someone#elsewhere 'tmux new -d sleep 600'
This will launch new session on elsewhere host and ssh command on local machine will return to shell almost instantly. You can then ssh to the remote host and tmux attach to that session. Note that there's nothing about local tmux running, only remote!
Also, if you want your session to persist after the job is done, simply add a shell launcher after your command, but don't forget to enclose in quotes:
ssh someone#elsewhere 'tmux new -d "~/myscript.sh; bash"'
Actually, whenever I need to run a command on a remote machine that's complicated, I like to put the command in a script on the destination machine, and just run that script using ssh.
For example:
# simple_script.sh (located on remote server)
#!/bin/bash
cat /var/log/messages | grep <some value> | awk -F " " '{print $8}'
And then I just run this command on the source machine:
ssh user#ip "/path/to/simple_script.sh"
If you run remote command without allocating tty, redirect stdout/stderr works, nohup is not necessary.
ssh user#host 'background command &>/dev/null &'
If you use -t to allocate tty to run interactive command along with background command, and background command is the last command, like this:
ssh -t user#host 'bash -c "interactive command; nohup backgroud command &>/dev/null &"'
It's possible that background command doesn't actually start. There's race here:
bash exits after nohup starts. As a session leader, bash exit results in HUP signal sent to nohup process.
nohup ignores HUP signal.
If 1 completes before 2, the nohup process will exit and won't start the background command at all. We need to wait nohup start the background command. A simple workaroung is to just add a sleep:
ssh -t user#host 'bash -c "interactive command; nohup backgroud command &>/dev/null & sleep 1"'
The question was asked and answered years ago, I don't know if openssh behavior changed since then. I was testing on:
OpenSSH_8.6p1, OpenSSL 1.1.1g FIPS 21 Apr 2020
I was trying to do the same thing, but with the added complexity that I was trying to do it from Java. So on one machine running java, I was trying to run a script on another machine, in the background (with nohup).
From the command line, here is what worked: (you may not need the "-i keyFile" if you don't need it to ssh to the host)
ssh -i keyFile user#host bash -c "\"nohup ./script arg1 arg2 > output.txt 2>&1 &\""
Note that to my command line, there is one argument after the "-c", which is all in quotes. But for it to work on the other end, it still needs the quotes, so I had to put escaped quotes within it.
From java, here is what worked:
ProcessBuilder b = new ProcessBuilder("ssh", "-i", "keyFile", "bash", "-c",
"\"nohup ./script arg1 arg2 > output.txt 2>&1 &\"");
Process process = b.start();
// then read from process.getInputStream() and close it.
It took a bit of trial & error to get this working, but it seems to work well now.
YOUR-COMMAND &> YOUR-LOG.log &
This should run the command and assign a process id you can simply tail -f YOUR-LOG.log to see results written to it as they happen. you can log out anytime and the process will carry on
If you are using zsh then use program-to-execute &! is a zsh-specific shortcut to both background and disown the process, such that exiting the shell will leave it running.
A follow-on to #cmcginty's concise working example which also shows how to alternatively wrap the outer command in double quotes. This is how the template would look if invoked from within a PowerShell script (which can only interpolate variables from within double-quotes and ignores any variable expansion when wrapped in single quotes):
ssh user#server "sh -c `"($cmd) &>/dev/null </dev/null &`""
Inner double-quotes are escaped with back-tick instead of backslash. This allows $cmd to be composed by the PowerShell script, e.g. for deployment scripts and automation and the like. $cmd can even contain a multi-line heredoc if composed with unix LF.
First follow this procedure:
Log in on A as user a and generate a pair of authentication keys. Do not enter a passphrase:
a#A:~> ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/a/.ssh/id_rsa):
Created directory '/home/a/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/a/.ssh/id_rsa.
Your public key has been saved in /home/a/.ssh/id_rsa.pub.
The key fingerprint is:
3e:4f:05:79:3a:9f:96:7c:3b:ad:e9:58:37:bc:37:e4 a#A
Now use ssh to create a directory ~/.ssh as user b on B. (The directory may already exist, which is fine):
a#A:~> ssh b#B mkdir -p .ssh
b#B's password:
Finally append a's new public key to b#B:.ssh/authorized_keys and enter b's password one last time:
a#A:~> cat .ssh/id_rsa.pub | ssh b#B 'cat >> .ssh/authorized_keys'
b#B's password:
From now on you can log into B as b from A as a without password:
a#A:~> ssh b#B
then this will work without entering a password
ssh b#B "cd /some/directory; program-to-execute &"
I think this is what you need:
At first you need to install sshpass on your machine.
then you can write your own script:
while read pass port user ip; do
sshpass -p$pass ssh -p $port $user#$ip <<ENDSSH1
COMMAND 1
.
.
.
COMMAND n
ENDSSH1
done <<____HERE
PASS PORT USER IP
. . . .
. . . .
. . . .
PASS PORT USER IP
____HERE