I have a solution with four projects in it which was initially created in VS2010.
I have now opened the project in VS2012 and everythings works fine, except when I am publishing the project (Web application) (building and testing works fine!).
When publishing I get the error "Could not get dependencies for project reference 'ProjectName.Model'".
If I then open the project (same folder!) back in VS2010 I can build it from there without problems.
Of course I can use VS2012 for all development and go back to VS2010 everytime I need to publish, but I would rather find a permanent solution to how to solve this!
I have tried removing my ProjectName.Model from the project and re-inserting it in VS2012, but it still did not solve the problem.
EDIT: 2013-08-06 13:37: Have found the following error msg: Could not get dependencies for project reference 'ProjectName.Model'Warning: Unable to update auto-refresh reference 'ajaxcontroltoolkit.dll'. Cannot find assembly 'G:\Dev\2012\JournalBase\WebSite\Bin\AjaxControlToolkit.dll'.
Have taken over the project from a colleague, and I can see that I do not have the folder G:\Dev\2012.... So I searched for the term "AjaxControlToolkit", but couldn't find it anywhere as text in the solution! Anyone knows where I should be able to find the reference? Apparently not in the .sln file or the .csproj file for project ProjectName.Model.
Related
I have a .NET MAUI project that was created with VS2022 Preview 2, and it builds without errors or warnings and works as expected in the debugger. Prior to updating Visual Studio to Version 17.4.0 Preview 4.0 I was able to publish the project as a sideloadable MSIX from within VS.
Since updating, I get the following error when I click Create in the Create App Packages wizard:
MSB4057 The target "_GenerateAppxPackage" does not exist in the project.
The error is listed against the MAUI project's .csproj file.
I've tried creating a separate new, default MAUI project in the new preview - this publishes ok and (as far as I can see) doesn't contain _GenerateAppxPackage anywhere within its files or project structure. So for now I'm assuming this isn't something new that was added with the preview.
I found some references to _GenerateAppxPackage on the web but they appear to refer to Azure integration. My project is a stand-alone data transformation app that doesn't even access the net.
I'm at a loss what to try next. I don't know what this target refers to, where it should "exist" within the project, or what it does. Can anyone help me understand the problem and/or point me to a solution?
Update: 2022-10-28:
I tried deleting the project structure and creating it from scratch with File -> New Project, then adding back only the .cs and .xaml files. Publishing the recreated project gives me the same error.
I also tried uninstalling the VS preview and re-downloading and installing it. Again, publishing the project gives me the same error.
I still have no idea what is causing this, or even where to start looking.
I faced with the same problem at Visual Studio 2022 17.4.0 (net6.0-windows10.0.19041.0).
The simplest solution for me was be using the command dotnet publish directly.
At root of project just write in terminal:
dotnet publish -f net6.0-windows10.0.19041.0 -c /p:RuntimeIdentifierOverride=win10-x64
I learned today that MAUI is now in the mainline Visual Studio 2022 edition, I've tried using that instead of the preview, and I can confirm that the problem goes away. I wish I'd known about this earlier...
I have a simple ASP.Net MVC project which for some reason has issues with intellisense. It is constantly giving me errors that namespaces local to the project can not be found, even though they do exist and the project will build fine. Here's an example:
It is very frustrating as this results in me having no intellisense available whatsoever. Has any one encountered a problem like this before, and do they know of a solution?
The project itself is an MVC4 website running in VS2013 in W8 under Paralells on a Macbook Air, should that have any effect on the problem.
As stated, I have no error messages to provide as the project builds and runs successfully, but please let me know if more details are required.
I had the same issue. Try removing your project from the solution and then add it again. It worked for me. Looks like a solution file quirk.
UPDATE: this is not a permanent fix as closing and reopening visual studio brings back the issue.
UPDATE 2: while looking to fix another issue where I couldn't change the default namespace of a project (I would get a System.Runtime.InteropServices.ExternalException), I found out that it was related to Xamarin tools for Visual Studio. I proceeded to completely uninstall Xamarin. It fixed my namespace renaming issue as well as the weird type or namespace not found / intellisense issue.
I had this same issue, seems to be something with the solution file and building the project as I could replicate the problem by simply creating a new project building then restarting visual studio.
Anyway I get around it at the moment by deleting the solution file and opening the project using the project file.
For anyone reading this in 2020, a fix that I've found that has worked for me is:
cleaning the solution and unloading the projects that have dependencies such as a web API depending on a data project and an application project (right click on the project in solution explorer and find "Unload Project"),
then reloading and building each project in the order of dependence such that they build successfully (right click on the unloaded project in solution explorer and find "Reload Project").
so in my case my data project does not depend on any other project so I reloaded and built that first, then the application project which depends on the data project and finally the web API project which depended on both data and application.
I am using Visual Studio 2010.
I wanted to study some code that dumps relevant data in a database, find out how it works and adapt it to my own version.
I only got as far as loading the solution in VS 2010, hitting the "Start Debugging" button, and then I got this error:
The working directory does not exist:
'D:\Dev\CodeProject\articles\smartcardfmwk\Smartcard_Framework
How can I fix this error?
The source code in question is Smart Card Framework, from Code Project
I downloaded the "Updated Project (VS2010)" and I can open it in VS2010, as well as build, but debugging just wouldn't work.
I did not try replicating the path yet, but as this is a working project, my company requires that it is placed on a very specific location accessible by others.
Nevermind, I got it. It was so simple, I'm sorry for wasting anyone's time.
The source Solution had a lot of Projects under them. I figured at least one of them was pointing to a directory that doesn't exist, so I waded through the Projects,
I right-clicked a Project and clicked the Properties
This will open up the ProjectName Property Tab
Under the Debug tab, there is a filed called "Working Directory"; I changed it to where the project is currently located.
This solved my problem, for now, unless there's a Project I missed. I am wondering, though, if I have to do this again if I move the Solution elsewhere.
This happened also in VS 2019 after importing / upgrading an old C# project. I was not able to see any project properties to change.
Finally it was fixed by manually editing the file <ProjName>.user.csproj as follows:
Replace
<StartWorkingDirectory>[wrong directory name]</StartWorkingDirectory>
with
<StartWorkingDirectory>.\</StartWorkingDirectory>
I also faced this problem that working directory does not exist, but I managed to solve it. There are certain steps to follow properly Whenever this error occurs.
In VS, open the "Project" at Toolbar.
Then go for Project properties.
Select Debug And check your working directory. If the path is wrong just browse it...
I've been going around and around on this issue. I've got a ASP.NET MVC 3 Web application built in VS2010 SP1. When I attempt to Publish to the local file system, I get the error
The Target "GatherAllFilesToPublish" does not exist in the project.
and it fails. I've followed the answer described in Why do I get the error "The target GatherAllFilesToPublish does not exist"? but it doesn't resolve my problem.
I've installed the Azure SDK 1.8 for VS2010 (October 2012), trying to get my system back to working. With this install, I see the following files/folders in my MSBuild tree.
Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.Targets, dated 1/18/2011.
This file does not mention the "GatherAllFilesToPublish"
After installing the Azure SDK, I've got another file/folder:
Microsoft\VisualStudio\v10.5\Web\Microsoft.Web.Publishing.Targets, dated 9/27/2012.
This file does contain the "GatherAllFilesToPublish" target.
Apparently my Publish function in VS2010 isn't using the v10.5 folder's targets. Does anyone have any suggestions to resolve this problem?
Thanks,
And the answer is...
At some point in the past, the project had been edited to include a local copy of the msbuild folder and I had forgotten about it. I used sysinternals' procmon to find the file access and it was only referencing msbuild under my project.
With that, i renamed the folder, edited the csproj file to remove the localized references for the MSBuildExtensionsPath32, and reloaded the project.
I was able to successfully publish my app.
After some use Visual Studio 2008 when opening a solution that is checked into Visual Studio Team Foundation will pop up a dialog saying:
Projects have recently been added to this solution. Do you want to get them from source control?
This happens every time the solution is loaded (even if no projects have been added). The only way I have found to remove this minor annoyance is to completely rebuild the SLN file.
Has anyone found a better/simpler way?
I had this recently after we moved a number of projects in the solution. I worked out eventually, that each project actual appears in solution file multiple times each with path information! So even though the path in the main reference of the project was correct it was wrong further down the file.
So go through the .sln file and make sure the paths in all the references of each project is correct.
For instance, the first reference for one of my projects is:
Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "ObexPushVB", "Samples\ObjectPush\ObexPushVB\ObexPushVB.vbproj", "{E3692A59-D636-48E8-9B57-7DA80A88E517}"
EndProject
In my case the path there was correctly updated. But then we have also for that project:
SccProjectUniqueName8 = Samples\\ObjectPush\\ObexPushVB\\ObexPushVB.vbproj
SccProjectTopLevelParentUniqueName8 = InTheHand.Net.Personal.sln
SccProjectName8 = Samples/ObjectPush/ObexPushVB
SccLocalPath8 = Samples\\ObjectPush\\ObexPushVB
So all of those paths needed to be updated too! After I fixed that manually all was well. (The sample there is after the fix BTW).
Hey, this actually happened to me about 4 years ago.
First, it sounds to me like someone on your team doesn't have all the updates applied to their visual studio installation. Go around and get everyone upgraded to the latest service pack for your VS version.
Once that is done, unbind the solution, fix the file, rebind it and tell everyone to do a force get latest on your TFS project.
See
http://social.msdn.microsoft.com/Forums/en-US/tfsversioncontrol/thread/c2822ef1-d5a9-4039-9d3e-498892ce70b6
http://www.nivisec.com/2008/09/vsts-projects-have-recently-been-added.html
(broken link: http://technorati.com/posts/Yadz3Mj1pxHPSJLlnUs1tL1sIwU5jXa5rNBbIAnYdvs%3D)
This message will also occur if your solution has a reference to a project whose location is outside of the solution directory, but it doesn't physically exist (i.e. you hadn't checked it out before opening the solution). VSS (or TFS) will then give you that message and clicking OK will automatically get latest on the project that's missing so your solution won't have any unloaded projects in it.
EDIT:
Reading that again confuses me. Basically you get the message if your solution has a source control binding to a project that isn't inside of the folder your solution is in, and that outside project doesn't physically exist on your machine. Clicking on OK will check the project out for you.
In my case it was a reference to a test project which has been deleted.
I noticed that when I inspected all the projects in the Solution Explorer. Our team uses solution folders so it was not normally visible and because it was a test project it didn't have any impact on the application.
After removing the project from the solution the messages is no longer shown.
I'm working with Visual Studio 2013.
For me, it happened after having modified the folder's structure of my solution (I added a sub-folder for a project directly on the source code explorer). I got rid of this boring error by removing all the projects from my solution, using the solution explorer. After that, I closed Visual Studio, manually edited the .sln file and removed the whole section :
GlobalSection(TeamFoundationVersionControl) = preSolution
To finish, I just added the projects back to the solution as "Existing projects" with solution explorer. Visual Studio will recreate by itself the removed section of the .sln file.
The same error message can occur if someone adds a project, check-in edited solution file, but don't adds project directory to source control.
To cut a long story short - this error can mean that in .sln file there's reference to .csproj file, but the .csproj itself is physically missing.
In my case I renamed a(n) (unloaded) project in VS. It correctly moved the project to a new folder and no data was lost. However the solution file still pointed to the old directory which still existed but was empty (so the project could not be actually loaded).
After deleting the project from the solution (which was no problem because the folder was allready empty) the problem was solved.
Adding the project again from the new location was no problem either.
I had this problem after moving a number of unit test projects that were under source control (VSTS) into another folder. After this whenever I opened a branch I would get the "Projects have recently been added to this solution. Do you want to get them from source control?" error.
For some reason the csproj file from the trunk wasn't under source control which meant it was missing from the branched version. I find this happens sometimes after moving source controlled projects.
To fix it I opened the original source trunk, used Source Control Explorer to add the missing file(s), then merged the trunk to the branches to copy over the missing csproj file.
After this I could open the branched versions without the warning popping up.