I'm trying to start my Node on a command prompt like this:
C:\IBM\WebSphere\AppServer\profiles\AppSrv01\bin>startnode
ADMU0128I: Starting tool with the AppSrv01 profile
ADMU3100I: Reading configuration for server: nodeagent
ADMU3200I: Server launched. Waiting for initialization status.
ADMU3011E: Server launched but failed initialization. Server logs, startServer.log, and other log files under C:\IBM\WebSphere\AppServer\profiles\AppSrv01\logs\nodeagent should contain failure information
What should I do? I try to search on how to start the node agent but it's all the same and I execute those command but it fall under the same error (noted at the top).
Here are the content of startServer.log
[8/15/13 13:42:21:240 CST] 00000040 NodeSync E ADMS0005E: The system is unable to generate synchronization request: javax.management.JMRuntimeException: ADMN0022E: Access is denied for the getFolderSyncUpdates operation on CellSync MBean because of insufficient or empty credentials.
find your soap.client.props file in your profile
add in your deployment's id / pass
see if that works.
also, try stopping your node, and restarting
Related
I am trying to restart my node by running StartNode.bat in cmd. But it is giving me the following error,
ADMU0111E: Program exiting with error: java.io.FileNotFoundException: C:\Users{userid}\workspaces\was_profiles{profilename}\config\cells\localcell\nodes\localnode\servers\nodeagent\server.xml (The system cannot find the path specified.) When I checked the above path, server.xml is present in the path C:\Users{userid}\workspaces\was_profiles{profilename}\config\cells\localcell\nodes\localnode\servers\server1\server.xml. I am not sure how to restart my node. Also, I am restarting the node, since I get ORA error invalid username/password issue while trying to test my datasource connection in IBM websphere.
Most of the posts suggest me to restart websphere server and nodeagent as well. Eventually, when I start the nodeagent, I get the above error. I tried to use syncNode command, but could not find the deployment manager host name, port details for my application.
It looks like you have single server version installed, not network deployment. In that case you dont have node and deployment manager, but just single server.
You should use commands like:
startServer.bat server1 - to start the server
stopServer.bat server1 - to stop server
Hi I tried the below command to start the dmgr.
~Websphere/Appserver/profiles/CORPDWAS70DepMgr/bin
$ ./startManagaer.sh
I got the below error.
ADMU0116I: Tool information is being logged in file
/opt/IBM/WebSphere/AppServer/profiles/CORPDWAS70DepMgr/logs/dmgr/startServer.log
ADMU0128I: Starting tool with the CORPDWAS70DepMgr profile
ADMU3100I: Reading configuration for server: dmgr
ADMU3200I: Server launched. Waiting for initialization status.
ADMU3011E: Server launched but failed initialization. startServer.log,
SystemOut.log(or job log in zOS) and other log files under
/opt/IBM/WebSphere/AppServer/profiles/CORPDWAS70DepMgr/logs/dmgr
should contain failure information.
I opened the systemout.log
I am unable to understand the error.
Please help.
Following error is encountered when trying to start Oracle Weblogic Server:
<Info> <Management> <BEA-141297> <Could not get the server file lock. Ensure that another server is not running in the same directory. Retrying for another 60 seconds.>
How do I overcome this error and start the server?
The error means that there is a file lock that could not be released, as the server was previously not shut down correctly.
In this case you must follow the next steps:
Navigate to tmp folder in your $DOMAIN_HOME directory. (for example: C:\Oracle\Middleware\Oracle_Home\user_projects\domains\mydomain\servers\AdminServer\tmp)
Delete the lock file for the server instance, AdminServer.lok
Check if there are any java.exe processes are running, which should not be there. If there are any, they would have to be killed.
Restart your server
Hi is someone aware about stopping and starting CDH(cloudera distribution Hadoop) Services with script we are doing this for production servers. For an instance if servers are restarted then before reboot all the Hadoop services stops gracefully and on startup the start.
I have a 8 Node Hadoop cluster on RHEL with cloudera 5.4.7 installed on it.
Till now i have identified few ways to do that one is here on link it says i have to use chkconfig to register the service on OS for eg as below:
sudo chkconfig hadoop-hdfs-namenode on
But when i am doing that i am getting error as
error reading information on service hadoop-hdfs-namenode: No such file or directory
which clearly states that it is unable to find the file i have specifed.
Then i searched for file and it is located in
/opt/cloudera/parcels/CDH-5.4.7-1.cdh5.4.7.p0.3/etc/rc.d/init.d/hadoop-hdfs-namenode
/opt/cloudera/parcels/CDH-5.4.7-1.cdh5.4.7.p0.3/etc/default/hadoop-hdfs-namenode
the i tried executing the same commands from the folder itself where files are located but the same error. The permissions are fine on file and tried ./ as well but same error.
I am also able to list all the process which are currently running by
sudo jps
14035 -- process information unavailable
10615 -- process information unavailable
15323 -- process information unavailable
5486 -- process information unavailable
2001 -- process information unavailable
46991 -- process information unavailable
42667 -- process information unavailable
33732 Jps
2698 -- process information unavailable
2727 -- process information unavailable
7901 -- process information unavailable
42624 -- process information unavailable
As one can see process names are not coming but these are hadoop process so to stop the process i can kill all of them but this is not the way to gracefully stop hadoop managed by cloudera. Please let me know if anyone is aware of anything which can help me moving forward.
Thanks to cloudera they provide a way to boot services on system startup. Below is the way to do that:
Click on the service
Go to the configuration
Search for Automatically Restart Process
Check the Check-Box.
It will restart the services on bootup.
you can do this by executing curl command form shell script. For example to start solr service you can use
curl -u admin:admin -X POST http://ipaddress:7180/api/v4/clusters//services/solr1/commands/start -H 'Content-type:aplication/json; charset=utf-8';
For More details on the visit
http://cloudera.github.io/cm_api/apidocs/v10/index.html
How do you "start a node agent" in Websphere ?
The error message is:
"Server cannot be started because the node agent for server x_server on node wasdev1Node01 is not active."
(I am on the dev server.)
Also, the app logon procedure errored because of "Exception occurred while the JNDI NamingManager was processing a javax.naming.Reference object. ". While trying to start the JINDY I got the node server message.
When I try to start the application server:
"Server cannot be started because the node agent for server wasdev1 on node wasdev1Node01 is not active."
Starting the Node Agent from the console:
"The node agent on node wasdev1Node01 must be started to perform the restart operation. Node agents in stopped state can not be started from the console."
You would need to start the node agent from command line as below.
WAS_HOME/profiles/YOUR_PROFILE_NAME/bin/startNode.cmd (I do not have this command.)
You would have the startNode.sh or startNode.cmd command linked in your profile's bin directory if your profile was created from a Network Deployment installation and your node had been federated into a cell. If your profile is a standalone application profile that has not been federated, there should not be a startNode command available.
Looking at the error you are running ND not standalone/base version. You cannot start the nodeagent from the console (only stop and restart.
startNode.sh(.bat) from command line to start the nodeagent. Make sure nodeagent process/pid is not present. As for the applicatin servers defined under the node, they need Location Daemon Service running on the node to start.
Yes if the error appears only thing you need to start nodeagent from your appsrv profile/bin with command prompt only if you install on windows environment.
you should open as command prompt as administrator privileges and then go to profile path and run startNode.bat or .sh .