The title is a mouth-full, but put simply, I have a large, undirected, incomplete graph, and I need to visit some subset of vertices in the (approximately) shortest time possible. Note that this isn't TSP, as I don't need to visit all vertices.
The naive approach would be to simply brute-force the solution by trying every possible walk which includes the required vertices, using A*, for example, to calculate the walks between required vertices. However, this is O(n!) where n is the number of required vertices. This is unfeasible for me, as n > 40 in my average case, and n ≈ 80 in my worst case.
Is there a more efficient algorithm for this, perhaps one that approximates the solution?
This question is similar to the question here, but differs in the fact that my graph is larger than the one in the linked question. There are several other similar questions, but none that I've seen exactly solve my specific problem.
If you allow visiting the same nodes several times, find the shortest path between each pair of mandatory vertices. Then you solve the TSP between the mandatory vertices, using the above shortest path costs. If you disallow multiple visits, the problem is much worse.
I am afraid you cannot escape the TSP.
I have a directed graph with less than 600 nodes, and each node's edge number is less than 8.
Now I need to find a path in this graph which must pass through some given nodes(<50). The order of passing given nodes is free.
I know it's a NPC problem, but I don't know how to solve it.
An approximate solution is also acceptable.
Thank you!
Compute the shortest ways between all pairs of the specific nodes. Then create a new graph that only contains those nodes, with the length of the shortest paths as distances. Now, the problem is "reduced" to Travelling Salesman.
(TSM has a fast 3/2-approximation that utilitizes minimal spanning trees and a matching, if that is good enough - the 50! possibilities are too much in any case)
I have n points and I need to connect all of them minimizing the final distance. The image above represents an algorithm that in each node it connects to the nearest one but the final output might be really of.
I've been searching a lot, I know some pathfinding algos but unaware of one that solves exactly this case. I found a question on Math Stackexchange but the answer is not providing any algorithm - https://math.stackexchange.com/a/581844/156584.
Is there any algorithm that solves exactly this problem? Otherwise I can bruteforce it.
Edit: Some clarification regarding the result I'm expecting: each node can be connected to 2 other nodes, creating a continuous path (like taking a pen and without ever lifting it, connect the nodes minimizing the final distance). I don't want to create a cycle (that being the travelling salesman problem).
PS: this question can also be translated to "complete graph with n vertices, and wanting to choose the set of edges such that the graph is connected, but the sum of the edge weights is minimized"
This problem is known as the shortest Hamiltonian path problem and it is NP-hard. So if the number of points is small, you can use backtracking or dynamic programming to find an optimal solution. If the number of points is large, you can use heuristics and/or approximations to obtain a relatively good answer(it is not always possible to find the best one in this case, though).
I have an graph with the following attributes:
Undirected
Not weighted
Each vertex has a minimum of 2 and maximum of 6 edges connected to it.
Vertex count will be < 100
Graph is static and no vertices/edges can be added/removed or edited.
I'm looking for paths between a random subset of the vertices (at least 2). The paths should simple paths that only go through any vertex once.
My end goal is to have a set of routes so that you can start at one of the subset vertices and reach any of the other subset vertices. Its not necessary to pass through all the subset nodes when following a route.
All of the algorithms I've found (Dijkstra,Depth first search etc.) seem to be dealing with paths between two vertices and shortest paths.
Is there a known algorithm that will give me all the paths (I suppose these are subgraphs) that connect these subset of vertices?
edit:
I've created a (warning! programmer art) animated gif to illustrate what i'm trying to achieve: http://imgur.com/mGVlX.gif
There are two stages pre-process and runtime.
pre-process
I have a graph and a subset of the vertices (blue nodes)
I generate all the possible routes that connect all the blue nodes
runtime
I can start at any blue node select any of the generated routes and travel along it to reach my destination blue node.
So my task is more about creating all of the subgraphs (routes) that connect all blue nodes, rather than creating a path from A->B.
There are so many ways to approach this and in order not confuse things, here's a separate answer that's addressing the description of your core problem:
Finding ALL possible subgraphs that connect your blue vertices is probably overkill if you're only going to use one at a time anyway. I would rather use an algorithm that finds a single one, but randomly (so not any shortest path algorithm or such, since it will always be the same).
If you want to save one of these subgraphs, you simply have to save the seed you used for the random number generator and you'll be able to produce the same subgraph again.
Also, if you really want to find a bunch of subgraphs, a randomized algorithm is still a good choice since you can run it several times with different seeds.
The only real downside is that you will never know if you've found every single one of the possible subgraphs, but it doesn't really sound like that's a requirement for your application.
So, on to the algorithm: Depending on the properties of your graph(s), the optimal algorithm might vary, but you could always start of with a simple random walk, starting from one blue node, walking to another blue one (while making sure you're not walking in your own old footsteps). Then choose a random node on that path and start walking to the next blue from there, and so on.
For certain graphs, this has very bad worst-case complexity but might suffice for your case. There are of course more intelligent ways to find random paths, but I'd start out easy and see if it's good enough. As they say, premature optimization is evil ;)
A simple breadth-first search will give you the shortest paths from one source vertex to all other vertices. So you can perform a BFS starting from each vertex in the subset you're interested in, to get the distances to all other vertices.
Note that in some places, BFS will be described as giving the path between a pair of vertices, but this is not necessary: You can keep running it until it has visited all nodes in the graph.
This algorithm is similar to Johnson's algorithm, but greatly simplified thanks to the fact that your graph is unweighted.
Time complexity: Since there is a constant number of edges per vertex, each BFS will take O(n), and the total will take O(kn), where n is the number of vertices and k is the size of the subset. As a comparison, the Floyd-Warshall algorithm will take O(n^3).
What you're searching for is (if I understand it correctly) not really all paths, but rather all spanning trees. Read the wikipedia article about spanning trees here to determine if those are what you're looking for. If it is, there is a paper you would probably want to read:
Gabow, Harold N.; Myers, Eugene W. (1978). "Finding All Spanning Trees of Directed and Undirected Graphs". SIAM J. Comput. 7 (280).
I have a undirected graph with about 100 nodes and about 200 edges. One node is labelled 'start', one is 'end', and there's about a dozen labelled 'mustpass'.
I need to find the shortest path through this graph that starts at 'start', ends at 'end', and passes through all of the 'mustpass' nodes (in any order).
( http://3e.org/local/maize-graph.png / http://3e.org/local/maize-graph.dot.txt is the graph in question - it represents a corn maze in Lancaster, PA)
Everyone else comparing this to the Travelling Salesman Problem probably hasn't read your question carefully. In TSP, the objective is to find the shortest cycle that visits all the vertices (a Hamiltonian cycle) -- it corresponds to having every node labelled 'mustpass'.
In your case, given that you have only about a dozen labelled 'mustpass', and given that 12! is rather small (479001600), you can simply try all permutations of only the 'mustpass' nodes, and look at the shortest path from 'start' to 'end' that visits the 'mustpass' nodes in that order -- it will simply be the concatenation of the shortest paths between every two consecutive nodes in that list.
In other words, first find the shortest distance between each pair of vertices (you can use Dijkstra's algorithm or others, but with those small numbers (100 nodes), even the simplest-to-code Floyd-Warshall algorithm will run in time). Then, once you have this in a table, try all permutations of your 'mustpass' nodes, and the rest.
Something like this:
//Precomputation: Find all pairs shortest paths, e.g. using Floyd-Warshall
n = number of nodes
for i=1 to n: for j=1 to n: d[i][j]=INF
for k=1 to n:
for i=1 to n:
for j=1 to n:
d[i][j] = min(d[i][j], d[i][k] + d[k][j])
//That *really* gives the shortest distance between every pair of nodes! :-)
//Now try all permutations
shortest = INF
for each permutation a[1],a[2],...a[k] of the 'mustpass' nodes:
shortest = min(shortest, d['start'][a[1]]+d[a[1]][a[2]]+...+d[a[k]]['end'])
print shortest
(Of course that's not real code, and if you want the actual path you'll have to keep track of which permutation gives the shortest distance, and also what the all-pairs shortest paths are, but you get the idea.)
It will run in at most a few seconds on any reasonable language :)
[If you have n nodes and k 'mustpass' nodes, its running time is O(n3) for the Floyd-Warshall part, and O(k!n) for the all permutations part, and 100^3+(12!)(100) is practically peanuts unless you have some really restrictive constraints.]
run Djikstra's Algorithm to find the shortest paths between all of the critical nodes (start, end, and must-pass), then a depth-first traversal should tell you the shortest path through the resulting subgraph that touches all of the nodes start ... mustpasses ... end
This is two problems... Steven Lowe pointed this out, but didn't give enough respect to the second half of the problem.
You should first discover the shortest paths between all of your critical nodes (start, end, mustpass). Once these paths are discovered, you can construct a simplified graph, where each edge in the new graph is a path from one critical node to another in the original graph. There are many pathfinding algorithms that you can use to find the shortest path here.
Once you have this new graph, though, you have exactly the Traveling Salesperson problem (well, almost... No need to return to your starting point). Any of the posts concerning this, mentioned above, will apply.
Actually, the problem you posted is similar to the traveling salesman, but I think closer to a simple pathfinding problem. Rather than needing to visit each and every node, you simply need to visit a particular set of nodes in the shortest time (distance) possible.
The reason for this is that, unlike the traveling salesman problem, a corn maze will not allow you to travel directly from any one point to any other point on the map without needing to pass through other nodes to get there.
I would actually recommend A* pathfinding as a technique to consider. You set this up by deciding which nodes have access to which other nodes directly, and what the "cost" of each hop from a particular node is. In this case, it looks like each "hop" could be of equal cost, since your nodes seem relatively closely spaced. A* can use this information to find the lowest cost path between any two points. Since you need to get from point A to point B and visit about 12 inbetween, even a brute force approach using pathfinding wouldn't hurt at all.
Just an alternative to consider. It does look remarkably like the traveling salesman problem, and those are good papers to read up on, but look closer and you'll see that its only overcomplicating things. ^_^ This coming from the mind of a video game programmer who's dealt with these kinds of things before.
This is not a TSP problem and not NP-hard because the original question does not require that must-pass nodes are visited only once. This makes the answer much, much simpler to just brute-force after compiling a list of shortest paths between all must-pass nodes via Dijkstra's algorithm. There may be a better way to go but a simple one would be to simply work a binary tree backwards. Imagine a list of nodes [start,a,b,c,end]. Sum the simple distances [start->a->b->c->end] this is your new target distance to beat. Now try [start->a->c->b->end] and if that's better set that as the target (and remember that it came from that pattern of nodes). Work backwards over the permutations:
[start->a->b->c->end]
[start->a->c->b->end]
[start->b->a->c->end]
[start->b->c->a->end]
[start->c->a->b->end]
[start->c->b->a->end]
One of those will be shortest.
(where are the 'visited multiple times' nodes, if any? They're just hidden in the shortest-path initialization step. The shortest path between a and b may contain c or even the end point. You don't need to care)
Andrew Top has the right idea:
1) Djikstra's Algorithm
2) Some TSP heuristic.
I recommend the Lin-Kernighan heuristic: it's one of the best known for any NP Complete problem. The only other thing to remember is that after you expanded out the graph again after step 2, you may have loops in your expanded path, so you should go around short-circuiting those (look at the degree of vertices along your path).
I'm actually not sure how good this solution will be relative to the optimum. There are probably some pathological cases to do with short circuiting. After all, this problem looks a LOT like Steiner Tree: http://en.wikipedia.org/wiki/Steiner_tree and you definitely can't approximate Steiner Tree by just contracting your graph and running Kruskal's for example.
Considering the amount of nodes and edges is relatively finite, you can probably calculate every possible path and take the shortest one.
Generally this known as the travelling salesman problem, and has a non-deterministic polynomial runtime, no matter what the algorithm you use.
http://en.wikipedia.org/wiki/Traveling_salesman_problem
The question talks about must-pass in ANY order. I have been trying to search for a solution about the defined order of must-pass nodes. I found my answer but since no question on StackOverflow had a similar question I'm posting here to let maximum people benefit from it.
If the order or must-pass is defined then you could run dijkstra's algorithm multiple times. For instance let's assume you have to start from s pass through k1, k2 and k3 (in respective order) and stop at e. Then what you could do is run dijkstra's algorithm between each consecutive pair of nodes. The cost and path would be given by:
dijkstras(s, k1) + dijkstras(k1, k2) + dijkstras(k2, k3) + dijkstras(k3, 3)
How about using brute force on the dozen 'must visit' nodes. You can cover all the possible combinations of 12 nodes easily enough, and this leaves you with an optimal circuit you can follow to cover them.
Now your problem is simplified to one of finding optimal routes from the start node to the circuit, which you then follow around until you've covered them, and then find the route from that to the end.
Final path is composed of :
start -> path to circuit* -> circuit of must visit nodes -> path to end* -> end
You find the paths I marked with * like this
Do an A* search from the start node to every point on the circuit
for each of these do an A* search from the next and previous node on the circuit to the end (because you can follow the circuit round in either direction)
What you end up with is a lot of search paths, and you can choose the one with the lowest cost.
There's lots of room for optimization by caching the searches, but I think this will generate good solutions.
It doesn't go anywhere near looking for an optimal solution though, because that could involve leaving the must visit circuit within the search.
One thing that is not mentioned anywhere, is whether it is ok for the same vertex to be visited more than once in the path. Most of the answers here assume that it's ok to visit the same edge multiple times, but my take given the question (a path should not visit the same vertex more than once!) is that it is not ok to visit the same vertex twice.
So a brute force approach would still apply, but you'd have to remove vertices already used when you attempt to calculate each subset of the path.