Related
Is there a way to do something like this
int a = (b == 5) ? c : d;
using Bash?
ternary operator ? : is just short form of if/else
case "$b" in
5) a=$c ;;
*) a=$d ;;
esac
Or
[[ $b = 5 ]] && a="$c" || a="$d"
Code:
a=$([ "$b" == 5 ] && echo "$c" || echo "$d")
If the condition is merely checking if a variable is set, there's even a shorter form:
a=${VAR:-20}
will assign to a the value of VAR if VAR is set, otherwise it will assign it the default value 20 -- this can also be a result of an expression.
This approach is technically called "Parameter Expansion".
if [[ $b -eq 5 ]]; then a="$c"; else a="$d"; fi
The cond && op1 || op2 expression suggested in other answers has an inherent bug: if op1 has a nonzero exit status, op2 silently becomes the result; the error will also not be caught in -e mode. So, that expression is only safe to use if op1 can never fail (e.g., :, true if a builtin, or variable assignment without any operations that can fail (like division and OS calls)).
Note the "" quotes. They will prevent translation of all whitespace into single spaces.
Double square brackets as opposed to single ones prevent incorrect operation if $b is equal to a test operator (e.g. "-z"; a workaround with [ is [ "x$b" == "xyes" ] and it only works for string comparison); they also lift the requirement for quoting.
(( a = b==5 ? c : d )) # string + numeric
[ $b == 5 ] && { a=$c; true; } || a=$d
This will avoid executing the part after || by accident when the code between && and || fails.
We can use following three ways in Shell Scripting for ternary operator :
[ $numVar == numVal ] && resVar="Yop" || resVar="Nop"
Or
resVar=$([ $numVar == numVal ] && echo "Yop" || echo "Nop")
Or
(( numVar == numVal ? (resVar=1) : (resVar=0) ))
Update: Extending the answer for string computations with below ready-to-run example. This is making use of second format mentioned above.
$ strVar='abc';resVar=$([[ $strVar == 'abc' ]] && echo "Yop" || echo "Nop");echo $resVar
Yop
$ strVar='aaa';resVar=$([[ $strVar == 'abc' ]] && echo "Yop" || echo "Nop");echo $resVar
Nop
The let command supports most of the basic operators one would need:
let a=b==5?c:d;
Naturally, this works only for assigning variables; it cannot execute other commands.
Here is another option where you only have to specify the variable you're assigning once, and it doesn't matter whether what your assigning is a string or a number:
VARIABLE=`[ test ] && echo VALUE_A || echo VALUE_B`
Just a thought. :)
There's also a very similar but simpler syntax for ternary conditionals in bash:
a=$(( b == 5 ? 123 : 321 ))
The following seems to work for my use cases:
Examples
$ tern 1 YES NO
YES
$ tern 0 YES NO
NO
$ tern 52 YES NO
YES
$ tern 52 YES NO 52
NO
and can be used in a script like so:
RESULT=$(tern 1 YES NO)
echo "The result is $RESULT"
tern
#!/usr/bin/env bash
function show_help()
{
ME=$(basename "$0")
IT=$(cat <<EOF
Returns a ternary result
usage: BOOLEAN VALUE_IF_TRUE VALUE_IF_FALSE
e.g.
# YES
$ME 1 YES NO
# NO
$ME 0 YES NO
# NO
$ME "" YES NO
# YES
$ME "STRING THAT ISNT BLANK OR 0" YES NO
# INFO contains NO
INFO=\$($ME 0 YES NO)
EOF
)
echo "$IT"
echo
exit
}
if [ "$1" = "help" ] || [ "$1" = '?' ] || [ "$1" = "--help" ] || [ "$1" = "h" ]; then
show_help
fi
if [ -z "$3" ]
then
show_help
fi
# Set a default value for what is "false" -> 0
FALSE_VALUE=${4:-0}
function main
{
if [ "$1" == "$FALSE_VALUE" ] || [ "$1" = '' ]; then
echo $3
exit;
fi;
echo $2
}
main "$1" "$2" "$3"
Here's a general solution, that
works with string tests as well
feels rather like an expression
avoids any subtle side effects when the condition fails
Test with numerical comparison
a=$(if [ "$b" -eq 5 ]; then echo "$c"; else echo "$d"; fi)
Test with String comparison
a=$(if [ "$b" = "5" ]; then echo "$c"; else echo "$d"; fi)
(ping -c1 localhost&>/dev/null) && { echo "true"; } || { echo "false"; }
You can use this if you want similar syntax
a=$(( $((b==5)) ? c : d ))
Some people have already presented some nice alternatives. I wanted to get the syntax as close as possible, so I wrote a function named ?.
This allows for the syntax:
[[ $x -eq 1 ]]; ? ./script1 : ./script2
# or
? '[[ $x -eq 1 ]]' ./script1 : ./script2
In both cases, the : is optional. All arguments that have spaces, the values must be quoted since it runs them with eval.
If the <then> or <else> clauses aren't commands, the function echos the proper value.
./script; ? Success! : "Failure :("
The function
?() {
local lastRet=$?
if [[ $1 == --help || $1 == -? ]]; then
echo $'\e[37;1mUsage:\e[0m
? [<condition>] <then> [:] <else>
If \e[37;1m<then>\e[0m and/or \e[37;1m<else>\e[0m are not valid commands, then their values are
printed to stdOut, otherwise they are executed. If \e[37;1m<condition>\e[0m is not
specified, evaluates the return code ($?) of the previous statement.
\e[37;1mExamples:\e[0m
myVar=$(? "[[ $x -eq 1 ]] foo bar)
\e[32;2m# myVar is set to "foo" if x is 1, else it is set to "bar"\e[0m
? "[[ $x = *foo* ]] "cat hello.txt" : "cat goodbye.txt"
\e[32;2m# runs cat on "hello.txt" if x contains the word "foo", else runs cat on
# "goodbye.txt"\e[0m
? "[[ $x -eq 1 ]] "./script1" "./script2"; ? "Succeeded!" "Failed :("
\e[32;2m# If x = 1, runs script1, else script2. If the run script succeeds, prints
# "Succeeded!", else prints "failed".\e[0m'
return
elif ! [[ $# -eq 2 || $# -eq 3 || $# -eq 4 && $3 == ':' ]]; then
1>&2 echo $'\e[37;1m?\e[0m requires 2 to 4 arguments
\e[37;1mUsage\e[0m: ? [<condition>] <then> [:] <else>
Run \e[37;1m? --help\e[0m for more details'
return 1
fi
local cmd
if [[ $# -eq 2 || $# -eq 3 && $2 == ':' ]]; then
cmd="[[ $lastRet -eq 0 ]]"
else
cmd="$1"
shift
fi
if [[ $2 == ':' ]]; then
eval "set -- '$1' '$3'"
fi
local result=$(eval "$cmd" && echo "$1" || echo "$2")
if command -v ${result[0]} &> /dev/null; then
eval "${result[#]}"
else
echo "${result[#]}"
fi
}
Obviously if you want the script to be shorter, you can remove the help text.
EDIT: I was unaware that ? acts as a placeholder character in a file name. Rather than matching any number of characters like *, it matches exactly one character. So, if you have a one-character file in your working directory, bash will try to run the filename as a command. I'm not sure how to get around this. I thought using command "?" ...args might work but, no dice.
Simplest ternary
brew list | grep -q bat && echo 'yes' || echo 'no'
This example will determine if you used homebrew to install bat or not yet
If true you will see "yes"
If false you will see "no"
I added the -q to suppress the grepped string output here, so you only see "yes" or "no"
Really the pattern you seek is this
doSomethingAndCheckTruth && echo 'yes' || echo 'no'
Tested with bash and zsh
Here are some options:
1- Use if then else in one line, it is possible.
if [[ "$2" == "raiz" ]] || [[ "$2" == '.' ]]; then pasta=''; else pasta="$2"; fi
2- Write a function like this:
# Once upon a time, there was an 'iif' function in MS VB ...
function iif(){
# Echoes $2 if 1,banana,true,etc and $3 if false,null,0,''
case $1 in ''|false|FALSE|null|NULL|0) echo $3;;*) echo $2;;esac
}
use inside script like this
result=`iif "$expr" 'yes' 'no'`
# or even interpolating:
result=`iif "$expr" "positive" "negative, because $1 is not true"`
3- Inspired in the case answer, a more flexible and one line use is:
case "$expr" in ''|false|FALSE|null|NULL|0) echo "no...$expr";;*) echo "yep $expr";;esac
# Expression can be something like:
expr=`expr "$var1" '>' "$var2"`
This is much like Vladimir's fine answer. If your "ternary" is a case of "if true, string, if false, empty", then you can simply do:
$ c="it was five"
$ b=3
$ a="$([[ $b -eq 5 ]] && echo "$c")"
$ echo $a
$ b=5
$ a="$([[ $b -eq 5 ]] && echo "$c")"
$ echo $a
it was five
A string-oriented alternative, that uses an array:
spec=(IGNORE REPLACE)
for p in {13..15}; do
echo "$p: ${spec[p==14]}";
done
which outputs:
13: IGNORE
14: REPLACE
15: IGNORE
to answer to : int a = (b == 5) ? c : d;
just write:
b=5
c=1
d=2
let a="(b==5)?c:d"
echo $a # 1
b=6;
c=1;
d=2;
let a="(b==5)?c:d"
echo $a # 2
remember that " expression " is equivalent to $(( expression ))
Two more answers
Here's some ways of thinking about this
bash integer variables
In addition to, dutCh, Vladimir and ghostdog74's corrects answers and because this question is regarding integer and tagged bash:
Is there a way to do something like this
int a = (b == 5) ? c : d;
There is a nice and proper way to work with integers under bash:
declare -i b=' RANDOM % 3 + 4 ' c=100 d=50 a=' b == 5 ? c : d '; echo $b '-->' $a
The output line from this command should by one of:
4 --> 50
5 --> 100
6 --> 50
Of course, declaring integer type of variable is to be done once:
declare -i a b c d
c=100 d=50 b=RANDOM%3+4
a=' b == 5 ? c : d '
echo $a $b
100 5
b=12 a=b==5?c:d
echo $a $b
50 12
Digression: Using a string as a math function:
mathString=' b == 5 ? c : d '
b=5 a=$mathString
echo $a $b
100 5
b=1 a=$mathString
echo $a $b
50 1
Based on parameter expansion and indirection
Following answers from Brad Parks and druid62, here is a way not limited to integer:
c=50 d=100 ar=([5]=c)
read -p 'Enter B: ' b
e=${ar[b]:-d};echo ${!e}
If b==5, then ar[b] is c and indirection do c is 50.
Else ar[any value other than 5] is empty, so parameter expansion will default to d, where indirection give 100.
Same demo using an array instead of an integer
ternArrayDemo(){
local -a c=(foo bar) d=(foo bar baz) e=(empty) ar=([5]=c [2]=d)
local b=${ar[$1]:-e}
b+=[#] # For array indirection
printf ' - %s\n' "${!b}"
}
Then
ternArrayDemo 0
- empty
ternArrayDemo 2
- foo
- bar
- baz
ternArrayDemo 4
- empty
ternArrayDemo 5
- foo
- bar
ternArrayDemo 6
- empty
Or using associative arrays
ternAssocArrayDemo(){
local -a c=(foo bar) d=(foo bar baz) e=(empty)
local -A ar=([foo]=c[#] [bar]=d[#] [baz]=d[-1])
local b=${ar[$1]:-e[#]}
printf ' - %s\n' "${!b}"
}
Then
ternAssocArrayDemo hello
- empty
ternAssocArrayDemo foo
- foo
- bar
ternAssocArrayDemo bar
- foo
- bar
- baz
ternAssocArrayDemo baz
- baz
The top answer [[ $b = 5 ]] && a="$c" || a="$d" should only be used if you are certain there will be no error after the &&, otherwise it will incorrectly excute the part after the ||.
To solve that problem I wrote a ternary function that behaves as it should and it even uses the ? and : operators:
Edit - new solution
Here is my new solution that does not use $IFS nor ev(a/i)l.
function executeCmds()
{
declare s s1 s2 i j k
declare -A cmdParts
declare pIFS=$IFS
IFS=$'\n'
declare results=($(echo "$1" | grep -oP '{ .*? }'))
IFS=$pIFS
s="$1"
for ((i=0; i < ${#results[#]}; i++)); do
s="${s/${results[$i]}/'\0'}"
results[$i]="${results[$i]:2:${#results[$i]}-3}"
results[$i]=$(echo ${results[$i]%%";"*})
done
s="$s&&"
let cmdParts[t]=0
while :; do
i=${cmdParts[t]}
let cmdParts[$i,t]=0
s1="${s%%"&&"*}||"
while :; do
j=${cmdParts[$i,t]}
let cmdParts[$i,$j,t]=0
s2="${s1%%"||"*};"
while :; do
cmdParts[$i,$j,${cmdParts[$i,$j,t]}]=$(echo ${s2%%";"*})
s2=${s2#*";"}
let cmdParts[$i,$j,t]++
[[ $s2 ]] && continue
break
done
s1=${s1#*"||"}
let cmdParts[$i,t]++
[[ $s1 ]] && continue
break
done
let cmdParts[t]++
s=${s#*"&&"}
[[ $s ]] && continue
break
done
declare lastError=0
declare skipNext=false
for ((i=0; i < ${cmdParts[t]}; i++ )) ; do
let j=0
while :; do
let k=0
while :; do
if $skipNext; then
skipNext=false
else
if [[ "${cmdParts[$i,$j,$k]}" == "\0" ]]; then
executeCmds "${results[0]}" && lastError=0 || lastError=1
results=("${results[#]:1}")
elif [[ "${cmdParts[$i,$j,$k]:0:1}" == "!" || "${cmdParts[$i,$j,$k]:0:1}" == "-" ]]; then
[ ${cmdParts[$i,$j,$k]} ] && lastError=0 || lastError=1
else
${cmdParts[$i,$j,$k]}
lastError=$?
fi
if (( k+1 < cmdParts[$i,$j,t] )); then
skipNext=false
elif (( j+1 < cmdParts[$i,t] )); then
(( lastError==0 )) && skipNext=true || skipNext=false
elif (( i+1 < cmdParts[t] )); then
(( lastError==0 )) && skipNext=false || skipNext=true
fi
fi
let k++
[[ $k<${cmdParts[$i,$j,t]} ]] || break
done
let j++
[[ $j<${cmdParts[$i,t]} ]] || break
done
done
return $lastError
}
function t()
{
declare commands="$#"
find="$(echo ?)"
replace='?'
commands="${commands/$find/$replace}"
readarray -d '?' -t statement <<< "$commands"
condition=${statement[0]}
readarray -d ':' -t statement <<< "${statement[1]}"
success="${statement[0]}"
failure="${statement[1]}"
executeCmds "$condition" || { executeCmds "$failure"; return; }
executeCmds "$success"
}
executeCmds separates each command individually, apart from the ones that should be skipped due to the && and || operators. It uses [] whenever a command starts with ! or a flag.
There are two ways to pass commands to it:
Pass the individual commands unquoted but be sure to quote ;, &&, and || operators.
t ls / ? ls qqq '||' echo aaa : echo bbb '&&' ls qq
Pass all the commands quoted:
t 'ls /a ? ls qqq || echo aaa : echo bbb && ls qq'
NB I found no way to pass in && and || operators as parameters unquoted, as they are illegal characters for function names and aliases, and I found no way to override bash operators.
Old solution - uses ev(a/i)l
function t()
{
pIFS=$IFS
IFS="?"
read condition success <<< "$#"
IFS=":"
read success failure <<< "$success"
IFS=$pIFS
eval "$condition" || { eval "$failure" ; return; }
eval "$success"
}
t ls / ? ls qqq '||' echo aaa : echo bbb '&&' ls qq
t 'ls /a ? ls qqq || echo aaa : echo bbb && ls qq'
What about such approach:
# any your function
function check () {
echo 'checking...';
# Change the following to 'true' to emulate a successful execution.
# Note: You can replace check function with any function you wish.
# Be aware in linux false and true are funcitons themselves. see 'help false' for instance.
false;
}
# double check pattern
check && echo 'update' \
|| check || echo 'create';
See how conditional statements works in the RxJs (i.e. filter pipe).
Yes, it is code duplication but more functional approach from my point of view.
I´m trying to pass to a function a condition to be applied in a while loop, and if it´s true increase a variable of that condition.
If that´s possible on bash?. Here an example code
a(){
condition=$1
echo "condition:$condition"
while [[ $condition ]] # --> run the condition
do
num1=num1+1
echo "increase num1:$num1" # num1 is a var of the condition
done
}
b(){
num1=1
num2=3
`a $num1 < $num2`
}
b
You can also use as below;
#! /bin/bash
a(){
condition="(( \$num $2 $3 ))"
num=$1
while eval $condition
do
(( num++ ))
echo "increase num1:$num"
done
}
b(){
num1=1
num2=5
a $num1 '<' $num2
}
b
Instead of eval, I would just pass the name of a function which a can call.
a () {
while "$1"; do
...
done
}
b(){
num1=1
num2=3
c () (( num1 < num2 ))
a c
}
b
(Keep in mind that functions are always global; c is not local to the body of b.)
You could do something like below :
a(){
num1="$1";
num2="$3";
if [ "$2" = "<" ]
then
op="-lt"
elif [ "$2" = ">" ]
then
op="-gt"
else
op="-eq"
fi
condition="$num1 $op $num2"
while eval "[ $condition ]" # --> evaluate the condition
do
((num1++)) #num1=num1+1 is in the original is wrong.
echo "increased num1:$num1"
condition="$num1 $op $num2" #rebuild the condition
done
}
b(){
num1=1
num2=3
a "$num1" '<' "$num2" #quote the params, else '<' stands for redirection
}
b
You can try with:
#!/bin/bash
a(){
condition="expr $1 > /dev/null"
while eval $condition; do
echo "num1=$num1 num2=$num2"
let num1++
done
}
b(){
num1=1
num2=3
a '$num1 \< $num2'
}
b
remember the command expr 1 < 3 produces an error:
$ expr 1 < 3
bash: 3: No such file or directory
this is the reason to write \< instead of <
So I have fixed my first issue with the script taking input but now no matter what letter I enter it only adds the numbers.
here is the code. any help would be greatly appreciated.
#!/bin/bash
add() {
expr $x + $y
}
sub() {
expr $x - $y
}
mult() {
expr $x * $y
}
div() {
expr $x / $y
}
echo "Enter a for add, s for subtract, m for multiply or d for divide and 2 numbers"
read choice x y
if [ $choice=="a" ]
then
add
else
if [ $choice == "s" ]
then
sub
else
if [ $choice == "m" ]
then
mult
else
if [ $choice == "d" ]
then
div
fi
fi
fi
fi
It seems like you want to get x and y from first and second arguments ( $1 and $2 ) and to read the operation ( a, s, d, m ) from stdin.
I modified your code a bit, to overcome the problems in the original script and to provide the result based on my assumptions:
#!/bin/bash
# First number.
x=$1
# Second number.
y=$2
# Result of either addition, subtraction, division or multiplication of $x and $y.
result=0
# Reads operation from user.
read -ep "Enter a for add, s for subtract, m for multiply or d for divide: " operation
case $operation in
a) result=$(( x + y ));;
s) result=$(( x - y ));;
d) result=$(( x / y ));;
m) result=$(( x * y ));;
*) printf '%s: %s\n' "$operation" "Unknown operation" >&2; exit 1;;
esac
printf 'result: %s\n' "$result"
Usage example: ( script name is sof.sh )
./sof.sh 5 4
Enter a for add, s for subtract, m for multiply or d for divide: a
result: 9
./sof.sh 5 4
Enter a for add, s for subtract, m for multiply or d for divide: m
result: 20
./sof.sh 5 4
Enter a for add, s for subtract, m for multiply or d for divide: s
result: 1
./sof.sh 5 4
Enter a for add, s for subtract, m for multiply or d for divide: d
result: 1
P.S.
Please note the following:
expr is a program used in ancient shell code to do math. In POSIX shells like bash, use $(( expression )). In bash, ksh88+, mksh/pdksh, or zsh, you can also use (( expression )) or 'let
expression'.
Though not used originaly in the script, while programming in Bash it is worth knowing that [[ is a bash keyword similar to (but more powerful than) the [ command. See this Bash FAQ and Test and conditionals.
Unless you're writing for POSIX sh, it is recommended to use [[.
First of all, you want the script to read the values from the standard input, but you are recovering it from the arguments.
Second, you are not passing parameters to the functions.
Third, you are not using parameters inside the functions.
Fourth, you are not letting spaces between operators when using expr.
NOTE: Rany Albeg Wein remarked that this bash guide is outdated, and he recommends this one. Also i recommend the GNU official guide (other formats).
So, assuming that you want to use your script like ./my-script.sh m 2 3 , here is your code, but working:
#!/bin/bash
add() {
expr $1 + $2
}
sub() {
expr $1 - $2
}
mult() {
expr $1 \* $2
}
div() {
expr $1 / $2
}
echo "Enter a for add, s for subtract, m for multiply or d for divide and 2 numbers"
x=$2
y=$3
if [ $1 == "a" ]
then
add $x $y
else
if [ $1 == "s" ]
then
sub $x $y
else
if [ $1 == "m" ]
then
mult $x $y
else
if [ $1 == "d" ]
then
div $x $y
fi
fi
fi
fi
And finally this is your script minimally modified to read the data from the standard input:
#!/bin/bash
add() {
echo "Result:"
expr $1 + $2
}
sub() {
echo "Result:"
expr $1 - $2
}
mult() {
echo "Result:"
expr $1 \* $2
}
div() {
echo "Result:"
expr $1 / $2
}
echo "Enter a for add, s for subtract, m for multiply or d for divide and 2 numbers"
read operation
echo "Read first parameter"
read x
echo "Read second parameter"
read y
if [ $operation == "a" ]
then
add $x $y
else
if [ $operation == "s" ]
then
sub $x $y
else
if [ $operation == "m" ]
then
mult $x $y
else
if [ $operation == "d" ]
then
div $x $y
fi
fi
fi
fi
Also, if you had some troubles, you could add debugging messages to the script just setting #!/bin/bash -xv at the beginning of the script.
I am running the following script, which has a function intended to tell me whether one date is before another, as seen at the very bottom of the script.
Now, the script has a few bugs. But one of them in particular is strange. The script creates files named by the dates that are inputted by the last argument.
It creates files called "09", "12", and "2015". Why are these files created? Here's the function. You'll notice the last few lines which call the function with inputs
function compare_two {
if [ $1 < $2 ];
then
return 2
elif [ $1 > $2 ];
then
return 3
else
return 4
fi
}
function compare_dates {
# two input arguments:
# e.g. 2015-09-17 2011-9-18
date1=$1
date2=$2
IFS="-"
test=( $date1 )
Y1=${test[0]}
M1=${test[1]}
D1=${test[2]}
test=( $date2 )
Y2=${test[0]}
M2=${test[1]}
D2=${test[2]}
compare_two $Y1 $Y2
if [ $? == 2 ];
then
echo "returning 2"
return 2
elif [ $? == 3 ];
then
return 3
else
compare_two $M1 $M2;
if [ $? == 2 ];
then
echo "returning 2"
return 2
elif [ $? == 3 ];
then
return 3
else
compare_two $D1 $D2;
if [ $? == 2 ];
then
echo $?
echo "return 2"
return 2
elif [ $? == 3 ];
then
echo "returning 3"
return 3
else
return 4
fi
fi
fi
}
compare_dates 2015-09-17 2015-09-12
echo $?
the result doesn't throw an error, but rather outputs
returning 2
2
The result is incorrect, I'm aware. But I'll fix that later. What is creating these files and how do I stop it? Thanks.
the lower and greater sign are interpreted as redirections.
type man test and find out the right syntax
Your problem is with the [ $1 < $2 ], the < is being understood as a redirection character.
The solution is to use any of this alternatives:
[ $1 \< $2 ]
[ $1 -lt $2 ]
(( $1 < $2 )) # works in bash.
The [[ $1 < $2 ]] is NOT an integer compare, but (from the manual):
« the < and > operators sort lexicographically using the current locale »
I'll recommend to use the (( $1 < $2 )) option.
to avoid a problem that some numbers (the ones that start with a zero) like 08 cause a problem when compared in an arithmetic expansion, use:
(( 10#$1 < 10#$2 ))
(( 10#$1 > 10#$2 ))
to force a base 10 for the numbers.
However, if possible, using GNU date is a lot easier IMhO (it transform Year/Month/Day into one single number to compare: seconds since epoch):
a=$(date -d '2015-09-17' '+%s');
b=$(date -d '2015-09-12' '+%s');
compare_two "$a" "$b"
Is there a way to do something like this
int a = (b == 5) ? c : d;
using Bash?
ternary operator ? : is just short form of if/else
case "$b" in
5) a=$c ;;
*) a=$d ;;
esac
Or
[[ $b = 5 ]] && a="$c" || a="$d"
Code:
a=$([ "$b" == 5 ] && echo "$c" || echo "$d")
If the condition is merely checking if a variable is set, there's even a shorter form:
a=${VAR:-20}
will assign to a the value of VAR if VAR is set, otherwise it will assign it the default value 20 -- this can also be a result of an expression.
This approach is technically called "Parameter Expansion".
if [[ $b -eq 5 ]]; then a="$c"; else a="$d"; fi
The cond && op1 || op2 expression suggested in other answers has an inherent bug: if op1 has a nonzero exit status, op2 silently becomes the result; the error will also not be caught in -e mode. So, that expression is only safe to use if op1 can never fail (e.g., :, true if a builtin, or variable assignment without any operations that can fail (like division and OS calls)).
Note the "" quotes. They will prevent translation of all whitespace into single spaces.
Double square brackets as opposed to single ones prevent incorrect operation if $b is equal to a test operator (e.g. "-z"; a workaround with [ is [ "x$b" == "xyes" ] and it only works for string comparison); they also lift the requirement for quoting.
(( a = b==5 ? c : d )) # string + numeric
[ $b == 5 ] && { a=$c; true; } || a=$d
This will avoid executing the part after || by accident when the code between && and || fails.
We can use following three ways in Shell Scripting for ternary operator :
[ $numVar == numVal ] && resVar="Yop" || resVar="Nop"
Or
resVar=$([ $numVar == numVal ] && echo "Yop" || echo "Nop")
Or
(( numVar == numVal ? (resVar=1) : (resVar=0) ))
Update: Extending the answer for string computations with below ready-to-run example. This is making use of second format mentioned above.
$ strVar='abc';resVar=$([[ $strVar == 'abc' ]] && echo "Yop" || echo "Nop");echo $resVar
Yop
$ strVar='aaa';resVar=$([[ $strVar == 'abc' ]] && echo "Yop" || echo "Nop");echo $resVar
Nop
The let command supports most of the basic operators one would need:
let a=b==5?c:d;
Naturally, this works only for assigning variables; it cannot execute other commands.
Here is another option where you only have to specify the variable you're assigning once, and it doesn't matter whether what your assigning is a string or a number:
VARIABLE=`[ test ] && echo VALUE_A || echo VALUE_B`
Just a thought. :)
There's also a very similar but simpler syntax for ternary conditionals in bash:
a=$(( b == 5 ? 123 : 321 ))
The following seems to work for my use cases:
Examples
$ tern 1 YES NO
YES
$ tern 0 YES NO
NO
$ tern 52 YES NO
YES
$ tern 52 YES NO 52
NO
and can be used in a script like so:
RESULT=$(tern 1 YES NO)
echo "The result is $RESULT"
tern
#!/usr/bin/env bash
function show_help()
{
ME=$(basename "$0")
IT=$(cat <<EOF
Returns a ternary result
usage: BOOLEAN VALUE_IF_TRUE VALUE_IF_FALSE
e.g.
# YES
$ME 1 YES NO
# NO
$ME 0 YES NO
# NO
$ME "" YES NO
# YES
$ME "STRING THAT ISNT BLANK OR 0" YES NO
# INFO contains NO
INFO=\$($ME 0 YES NO)
EOF
)
echo "$IT"
echo
exit
}
if [ "$1" = "help" ] || [ "$1" = '?' ] || [ "$1" = "--help" ] || [ "$1" = "h" ]; then
show_help
fi
if [ -z "$3" ]
then
show_help
fi
# Set a default value for what is "false" -> 0
FALSE_VALUE=${4:-0}
function main
{
if [ "$1" == "$FALSE_VALUE" ] || [ "$1" = '' ]; then
echo $3
exit;
fi;
echo $2
}
main "$1" "$2" "$3"
Here's a general solution, that
works with string tests as well
feels rather like an expression
avoids any subtle side effects when the condition fails
Test with numerical comparison
a=$(if [ "$b" -eq 5 ]; then echo "$c"; else echo "$d"; fi)
Test with String comparison
a=$(if [ "$b" = "5" ]; then echo "$c"; else echo "$d"; fi)
(ping -c1 localhost&>/dev/null) && { echo "true"; } || { echo "false"; }
You can use this if you want similar syntax
a=$(( $((b==5)) ? c : d ))
Some people have already presented some nice alternatives. I wanted to get the syntax as close as possible, so I wrote a function named ?.
This allows for the syntax:
[[ $x -eq 1 ]]; ? ./script1 : ./script2
# or
? '[[ $x -eq 1 ]]' ./script1 : ./script2
In both cases, the : is optional. All arguments that have spaces, the values must be quoted since it runs them with eval.
If the <then> or <else> clauses aren't commands, the function echos the proper value.
./script; ? Success! : "Failure :("
The function
?() {
local lastRet=$?
if [[ $1 == --help || $1 == -? ]]; then
echo $'\e[37;1mUsage:\e[0m
? [<condition>] <then> [:] <else>
If \e[37;1m<then>\e[0m and/or \e[37;1m<else>\e[0m are not valid commands, then their values are
printed to stdOut, otherwise they are executed. If \e[37;1m<condition>\e[0m is not
specified, evaluates the return code ($?) of the previous statement.
\e[37;1mExamples:\e[0m
myVar=$(? "[[ $x -eq 1 ]] foo bar)
\e[32;2m# myVar is set to "foo" if x is 1, else it is set to "bar"\e[0m
? "[[ $x = *foo* ]] "cat hello.txt" : "cat goodbye.txt"
\e[32;2m# runs cat on "hello.txt" if x contains the word "foo", else runs cat on
# "goodbye.txt"\e[0m
? "[[ $x -eq 1 ]] "./script1" "./script2"; ? "Succeeded!" "Failed :("
\e[32;2m# If x = 1, runs script1, else script2. If the run script succeeds, prints
# "Succeeded!", else prints "failed".\e[0m'
return
elif ! [[ $# -eq 2 || $# -eq 3 || $# -eq 4 && $3 == ':' ]]; then
1>&2 echo $'\e[37;1m?\e[0m requires 2 to 4 arguments
\e[37;1mUsage\e[0m: ? [<condition>] <then> [:] <else>
Run \e[37;1m? --help\e[0m for more details'
return 1
fi
local cmd
if [[ $# -eq 2 || $# -eq 3 && $2 == ':' ]]; then
cmd="[[ $lastRet -eq 0 ]]"
else
cmd="$1"
shift
fi
if [[ $2 == ':' ]]; then
eval "set -- '$1' '$3'"
fi
local result=$(eval "$cmd" && echo "$1" || echo "$2")
if command -v ${result[0]} &> /dev/null; then
eval "${result[#]}"
else
echo "${result[#]}"
fi
}
Obviously if you want the script to be shorter, you can remove the help text.
EDIT: I was unaware that ? acts as a placeholder character in a file name. Rather than matching any number of characters like *, it matches exactly one character. So, if you have a one-character file in your working directory, bash will try to run the filename as a command. I'm not sure how to get around this. I thought using command "?" ...args might work but, no dice.
Simplest ternary
brew list | grep -q bat && echo 'yes' || echo 'no'
This example will determine if you used homebrew to install bat or not yet
If true you will see "yes"
If false you will see "no"
I added the -q to suppress the grepped string output here, so you only see "yes" or "no"
Really the pattern you seek is this
doSomethingAndCheckTruth && echo 'yes' || echo 'no'
Tested with bash and zsh
Here are some options:
1- Use if then else in one line, it is possible.
if [[ "$2" == "raiz" ]] || [[ "$2" == '.' ]]; then pasta=''; else pasta="$2"; fi
2- Write a function like this:
# Once upon a time, there was an 'iif' function in MS VB ...
function iif(){
# Echoes $2 if 1,banana,true,etc and $3 if false,null,0,''
case $1 in ''|false|FALSE|null|NULL|0) echo $3;;*) echo $2;;esac
}
use inside script like this
result=`iif "$expr" 'yes' 'no'`
# or even interpolating:
result=`iif "$expr" "positive" "negative, because $1 is not true"`
3- Inspired in the case answer, a more flexible and one line use is:
case "$expr" in ''|false|FALSE|null|NULL|0) echo "no...$expr";;*) echo "yep $expr";;esac
# Expression can be something like:
expr=`expr "$var1" '>' "$var2"`
This is much like Vladimir's fine answer. If your "ternary" is a case of "if true, string, if false, empty", then you can simply do:
$ c="it was five"
$ b=3
$ a="$([[ $b -eq 5 ]] && echo "$c")"
$ echo $a
$ b=5
$ a="$([[ $b -eq 5 ]] && echo "$c")"
$ echo $a
it was five
A string-oriented alternative, that uses an array:
spec=(IGNORE REPLACE)
for p in {13..15}; do
echo "$p: ${spec[p==14]}";
done
which outputs:
13: IGNORE
14: REPLACE
15: IGNORE
to answer to : int a = (b == 5) ? c : d;
just write:
b=5
c=1
d=2
let a="(b==5)?c:d"
echo $a # 1
b=6;
c=1;
d=2;
let a="(b==5)?c:d"
echo $a # 2
remember that " expression " is equivalent to $(( expression ))
Two more answers
Here's some ways of thinking about this
bash integer variables
In addition to, dutCh, Vladimir and ghostdog74's corrects answers and because this question is regarding integer and tagged bash:
Is there a way to do something like this
int a = (b == 5) ? c : d;
There is a nice and proper way to work with integers under bash:
declare -i b=' RANDOM % 3 + 4 ' c=100 d=50 a=' b == 5 ? c : d '; echo $b '-->' $a
The output line from this command should by one of:
4 --> 50
5 --> 100
6 --> 50
Of course, declaring integer type of variable is to be done once:
declare -i a b c d
c=100 d=50 b=RANDOM%3+4
a=' b == 5 ? c : d '
echo $a $b
100 5
b=12 a=b==5?c:d
echo $a $b
50 12
Digression: Using a string as a math function:
mathString=' b == 5 ? c : d '
b=5 a=$mathString
echo $a $b
100 5
b=1 a=$mathString
echo $a $b
50 1
Based on parameter expansion and indirection
Following answers from Brad Parks and druid62, here is a way not limited to integer:
c=50 d=100 ar=([5]=c)
read -p 'Enter B: ' b
e=${ar[b]:-d};echo ${!e}
If b==5, then ar[b] is c and indirection do c is 50.
Else ar[any value other than 5] is empty, so parameter expansion will default to d, where indirection give 100.
Same demo using an array instead of an integer
ternArrayDemo(){
local -a c=(foo bar) d=(foo bar baz) e=(empty) ar=([5]=c [2]=d)
local b=${ar[$1]:-e}
b+=[#] # For array indirection
printf ' - %s\n' "${!b}"
}
Then
ternArrayDemo 0
- empty
ternArrayDemo 2
- foo
- bar
- baz
ternArrayDemo 4
- empty
ternArrayDemo 5
- foo
- bar
ternArrayDemo 6
- empty
Or using associative arrays
ternAssocArrayDemo(){
local -a c=(foo bar) d=(foo bar baz) e=(empty)
local -A ar=([foo]=c[#] [bar]=d[#] [baz]=d[-1])
local b=${ar[$1]:-e[#]}
printf ' - %s\n' "${!b}"
}
Then
ternAssocArrayDemo hello
- empty
ternAssocArrayDemo foo
- foo
- bar
ternAssocArrayDemo bar
- foo
- bar
- baz
ternAssocArrayDemo baz
- baz
The top answer [[ $b = 5 ]] && a="$c" || a="$d" should only be used if you are certain there will be no error after the &&, otherwise it will incorrectly excute the part after the ||.
To solve that problem I wrote a ternary function that behaves as it should and it even uses the ? and : operators:
Edit - new solution
Here is my new solution that does not use $IFS nor ev(a/i)l.
function executeCmds()
{
declare s s1 s2 i j k
declare -A cmdParts
declare pIFS=$IFS
IFS=$'\n'
declare results=($(echo "$1" | grep -oP '{ .*? }'))
IFS=$pIFS
s="$1"
for ((i=0; i < ${#results[#]}; i++)); do
s="${s/${results[$i]}/'\0'}"
results[$i]="${results[$i]:2:${#results[$i]}-3}"
results[$i]=$(echo ${results[$i]%%";"*})
done
s="$s&&"
let cmdParts[t]=0
while :; do
i=${cmdParts[t]}
let cmdParts[$i,t]=0
s1="${s%%"&&"*}||"
while :; do
j=${cmdParts[$i,t]}
let cmdParts[$i,$j,t]=0
s2="${s1%%"||"*};"
while :; do
cmdParts[$i,$j,${cmdParts[$i,$j,t]}]=$(echo ${s2%%";"*})
s2=${s2#*";"}
let cmdParts[$i,$j,t]++
[[ $s2 ]] && continue
break
done
s1=${s1#*"||"}
let cmdParts[$i,t]++
[[ $s1 ]] && continue
break
done
let cmdParts[t]++
s=${s#*"&&"}
[[ $s ]] && continue
break
done
declare lastError=0
declare skipNext=false
for ((i=0; i < ${cmdParts[t]}; i++ )) ; do
let j=0
while :; do
let k=0
while :; do
if $skipNext; then
skipNext=false
else
if [[ "${cmdParts[$i,$j,$k]}" == "\0" ]]; then
executeCmds "${results[0]}" && lastError=0 || lastError=1
results=("${results[#]:1}")
elif [[ "${cmdParts[$i,$j,$k]:0:1}" == "!" || "${cmdParts[$i,$j,$k]:0:1}" == "-" ]]; then
[ ${cmdParts[$i,$j,$k]} ] && lastError=0 || lastError=1
else
${cmdParts[$i,$j,$k]}
lastError=$?
fi
if (( k+1 < cmdParts[$i,$j,t] )); then
skipNext=false
elif (( j+1 < cmdParts[$i,t] )); then
(( lastError==0 )) && skipNext=true || skipNext=false
elif (( i+1 < cmdParts[t] )); then
(( lastError==0 )) && skipNext=false || skipNext=true
fi
fi
let k++
[[ $k<${cmdParts[$i,$j,t]} ]] || break
done
let j++
[[ $j<${cmdParts[$i,t]} ]] || break
done
done
return $lastError
}
function t()
{
declare commands="$#"
find="$(echo ?)"
replace='?'
commands="${commands/$find/$replace}"
readarray -d '?' -t statement <<< "$commands"
condition=${statement[0]}
readarray -d ':' -t statement <<< "${statement[1]}"
success="${statement[0]}"
failure="${statement[1]}"
executeCmds "$condition" || { executeCmds "$failure"; return; }
executeCmds "$success"
}
executeCmds separates each command individually, apart from the ones that should be skipped due to the && and || operators. It uses [] whenever a command starts with ! or a flag.
There are two ways to pass commands to it:
Pass the individual commands unquoted but be sure to quote ;, &&, and || operators.
t ls / ? ls qqq '||' echo aaa : echo bbb '&&' ls qq
Pass all the commands quoted:
t 'ls /a ? ls qqq || echo aaa : echo bbb && ls qq'
NB I found no way to pass in && and || operators as parameters unquoted, as they are illegal characters for function names and aliases, and I found no way to override bash operators.
Old solution - uses ev(a/i)l
function t()
{
pIFS=$IFS
IFS="?"
read condition success <<< "$#"
IFS=":"
read success failure <<< "$success"
IFS=$pIFS
eval "$condition" || { eval "$failure" ; return; }
eval "$success"
}
t ls / ? ls qqq '||' echo aaa : echo bbb '&&' ls qq
t 'ls /a ? ls qqq || echo aaa : echo bbb && ls qq'
What about such approach:
# any your function
function check () {
echo 'checking...';
# Change the following to 'true' to emulate a successful execution.
# Note: You can replace check function with any function you wish.
# Be aware in linux false and true are funcitons themselves. see 'help false' for instance.
false;
}
# double check pattern
check && echo 'update' \
|| check || echo 'create';
See how conditional statements works in the RxJs (i.e. filter pipe).
Yes, it is code duplication but more functional approach from my point of view.