I sometimes need to run a very long shell command, and I don't want to copy the long command to an editor and edit it there.
Is there a way in the shell to move the cursor quickly in instead of holding the left key for almost a minute and get to the most left?
Like move the cursor by word when you hold some key?
Or a combo could jump to the beginning of the command?
Assuming you're using bash in the default mode, ctrl-e should do that for you.
Also helpful: Ctrl-x-e will take your current command line and open it in an editor, chosen via $EDITOR. (see commandlinefu.com)
Yes - in almost all shells, control-A will jump to the beginning of the line, and control-E to the end.
If you're using bash shell you can use control-a to jump to the start of the line, control-e to jump to the end.
More explanation and commands here.
Related
I'm trying to write a command that writes many lines of output, then rewinds to the beginning to overwrite them in sequence with more information. To do this, I count the number of lines, then move that many lines up with ANSI escape codes, then start outputting again. This works great if the many lines of output fit in the window I have open, but if there are too many lines, the cursor only ends up moving to the top visible line. How can I always go back to the beginning of the output, regardless of the window size?
One simpler option may be to use a library to do it instead of doing all the heavy lifting and calculations yourself have a look at something like BashSimpleCurses this would allow you to use the update function easily.
How can I capture the input/ output from a script in realtime (such as with tee), but line-by-line instead of character-by-character? My goal is to capture the input typed into the interactive prompts of a script only after backspaces and auto-completion have finished processing (after the RETURN key is hit).
Specifically, I am trying to create a wrapper script for ssh that creates a timestamped log of commands used on remote servers. The script, which uses tee to redirect the output for filtering, works well, but the redirected output gets jumbled with unsubmitted characters whenever I use the backspace key or the up/down keys to scroll through my remote history. For example: service test stopexitservice test stopart or cd ..logs[1Pls -al.
Perhaps there is a way to capture the terminal's scrollback and redirect that like with tee?
Update: I have found a character-based cleanup solution that does what I want most of the time. However, I am still hoping for an answer to this question (which may well be msw's answer that it is very difficult to do).
In the Unix world there are two primary modes of handling keyboard input. These are known as 'raw' in which characters are passed from the terminal to the reading program one at a time. This is the mode that editors (and such) will use because the editor needs to respond immediately when you press a key.
The other terminal discipline is called 'cooked' which is the line by line behavior that you think of as the bash line by line input where you get to backspace and the command is not executed until you press return. Ssh has to take your input in raw, character-by-character mode because it has no idea what is running on the other side. For example, if you are running an editor on the far side, it can't wait for a return before sending the key-press. So, as some have suggested, grabbing shell history on the far side is the only reasonable way to get a command-by-command record of the bash commands you typed.
I oversimplified for clarity; actually most installations of bash take input in raw mode because they allow editor like command modification. For example, Ctrl-P scrolls up the command history or Ctrl-A goes to the beginning of the line. And bash needs to be able to get those keys the moment they are typed not waiting for a return.
This is another reason that capturing on the local side is obnoxiously difficult: if you capture on the local side, the stream will be filled with Backspaces and all of bash's editing commands. To get a true transcript of what the remote shell actually executed you have to parse the character stream as if you were the remote shell. There also a problem if you run something like
vi /some_file/which_is_on_the_remote/machine
the input stream to the local ssh will be filled with movement commands snippets of text including backspaces and so on and it would be bloody difficult to figure out what is part of a bash command and what is you talking to the editor.
Few things involving computers are impossible; getting clean input from the local side of an ssh invocation is really, really hard.
I question the actual utility of recording the commands that you execute on a local or remote machine. The reason is that there is so much state which is not visible from a command log. As a simple example here's a log of two commands:
17:00$ cp important_file important_file.bak
17:15$ rm important_file
and two days later you are trying to figure out whether important_file.bak should have the contents you intended or not. Given that log you can't answer that simple question. Even if you had the sequence
16:58$ cat important_file
17:00$ cp important_file important_file.bak
17:15$ rm important_file
If you aren't capturing the output, the cat in the log will not tell you anything. Give me almost any command sequence and I can envision a scenario in which it will not give you the information you need to make sense of what was done.
For a very similar purpose I use GNU screen which offer the option to record everything you do in a shell session (INPUT/OUTPUT). The log it creates also comes with undesirable characters but I clean them with perl:
perl -ne 's/\x1b[[()=][;?0-9]*[0-9A-Za-z]?//g;s/\r//g;s/\007//g;print' < screenlog.0
I hope this helps.
Some features of screen:
http://speaking-my-language.blogspot.com/2010/09/top-5-underused-gnu-screen-features.html
Site I found the perl-oneliner:
https://superuser.com/questions/99128/removing-the-escape-characters-from-gnu-screens-screenlog-n
Every now and then when using the ack-vim plugin the font in my window will change to all symbols. I've yet to see any pattern to when this happens. Any suggestions on the cause and possible remedy would be appreciated.
I've seen that happen when binary content got printed to the terminal. Do your Ack queries potentially include binary files?
A fix might be
:!echo -e '\ec\e(K\e[J'
These ANSI Escape sequences attempt to reset the terminal:
# "ESC c" - sends reset to the terminal.
# "ESC ( K" - reloads the screen output mapping table.
# "ESC [ J" - erases display.
This looks like the typical character set translation enabled by the Shift Out control character; you usually just need to send the Shift In control character to counteract it.
Basically, something is outputting a C-n character (Control-N, U+000E, named Shift Out) which tells your terminal to switch to a different display character set. You should be able to get your terminal to switch back to the normal display character set by sending a C-o (Control-O, U+000F, named Shift In) to it.
If you are in Vim, then you can probably send the C-o with a command like this:
:!printf \\017
You will have to type (or paste) this command “blindly” since (due to the alternate character set) you will probably not be able to read what you are typing. If you are typing it (not pasting), then you can also type C-v C-o (to insert a single, literal C-o) instead of the backslashed octal, if that is easier to remember.
If you find that this problem occurs only sporadically when you use the vim-ack plugin, then perhaps some bit of the text results contains the problematic Shift Out character. You might try searching for the file with a command like this:
grep -FRl $(printf \\016) .
Once you know the names of the files, then you should be able to use Vim to search for the character (start a search and type C-v C-n to insert a literal C-n). Maybe it is just some garbage that you can clean out, or maybe you can configure your ack-based searches to exclude the problematic files.
You also tagged the question with tmux. I can not tell for sure, but it looks like the top line might be a tmux status line. Since this line is also corrupted it indicates that it your external terminal emulator that has switched character sets, not just one of your tmux panes.
If you send Shift Out or Shift In directly to a tmux pane it will only affect that pane (each pane is emulated independently), so your status like could not have been munged just by a stray Shift Out hitting a single pane.
If you are running inside tmux, then the easiest way to reset the outside terminal is to suspend and resume your tmux client (or detach from and reattach to your session). tmux pretty much resets the outside terminal when it gives up control.
Depending on the situation, you may also have to reset the character set of the tmux pane by sending it a C-o, too (i.e. printf \\017 at a shell, or a :! prompt in Vim).
It is easy to see how a stray Shift Out could reconfigure a single tmux pane, but it is harder to see how it could have “leaked” out to reconfigure the external terminal (tmux is pretty good at isolating things like this). However, there is a control sequence that tmux recognizes that instructs it to pass data directly to the external terminal (thus “leaking out”), but it is much less likely that you would randomly encounter this sequence since it is much longer:
printf '\ePtmux;%s\e\\' 'stuff bound for the external terminal'
You could use it to send the restorative Shift In like this:
printf '\ePtmux;%s\e\\' $(printf \\017)
You will also want to tell tmux to redraw itself after this (by default, the refresh-client command is bound to C-b r).
It is probably easier to just suspend and resume (or detach and reattach), but this sequence is useful if that is not possible. It also provides a means toward understanding what kind of sequence might “leak” out of tmux to switch the character set of the external terminal.
Is it possible to jump to current line being executed in the Source Window of cgdb?
It would be great to have a command or a shortcut to do this, especially after browsing files in the File Dialog mode for a long time.
It turned out that you can jump to current line easily: just use gdb frame command without arguments, or simply f.
I don't think we have a shortcut for it. I usually do a quick up and down (or vice versa) in gdb.
You can use '.. Please please See https://github.com/cgdb/cgdb/issues/53
Say I am in a bash terminal and have a large history of commands. I pressed the up arrow a whole bunch of times and am in the "middle" of the history. I want to now navigate to the first or the last command in my history quickly (without holding down the up or the down arrow for a long time). Is this possible? If so, what is the shortcut key to achieving this?
Take a look in the man page:
man bash
Here I copied for you the thing you were looking for:
previous-history (C-p)
Fetch the previous command from the history list, moving back in the list.
next-history (C-n)
Fetch the next command from the history list, moving forward in the list.
beginning-of-history (M-<)
Move to the first line in the history.
end-of-history (M->)
Move to the end of the input history, i.e., the line currently being entered.
Depending on how things are set up for your terminal, you can usually do a Ctrl+C to break you back to the beginning (no comment) and then go up once or twice to get to the recent command you want.
Alternatively, using the history command will list all the recent commands used with index values associated with them. !# where # is the index number will rerun that command. There's a nice usefulness of the command history | grep [command] to try and find a specific command in your history.