I'm using rsync to backup some data from a remote host.
this is how I'm using the rsync cmd:
rsync --dry-run -avhi -e ssh --include-from=/home/rsync_list/test.txt root#10.10.4.61:/ /mnt/BACKUP/my_BACKUP/
this is the file /home/rsync_list/test.txt
+ /usr/acs/conf/**
+ /usr/acs/bin/**
+ /raid0/opmdps/TEMP_folder/**
- *
I want to copy only the listed folders excluding the remaining files.
I always get
receiving file list ... done
sent 103 bytes received 48 bytes 302.00 bytes/sec
total size is 0 speedup is 0.00 (DRY RUN)
Could you tell me what I'm doing wrong? How should I write the rsync command if I would like to sync, for example, only /raid0/opmdps/TEMP_folder/ without its subfolders?
I wonder if you really only tried with the command you posted?
Not only you are using "--dry-run" option, even the output indicates this:
total size is 0 speedup is 0.00 (DRY RUN)
Please consult the manpage:
-n, --dry-run perform a trial run with no changes made
https://linux.die.net/man/1/rsync
May I suggest you give it a run without --dry-run?
I need to compare two directories to validate a backup.
Say my directory looks like the following:
Filename Filesize Filename Filesize
user#main_server:~/mydir/ user#backup_server:~/mydir/
file1000.txt 4182410737 file1000.txt 4182410737
file1001.txt 8241410737 - <-- missing on backup_server!
... ...
file9999.txt 2410418737 file9999.txt 1111111111 <-- size != main_server
Is there a quick one liner that would get me close to output like:
Invalid Backup Files:
file1001.txt
file9999.txt
(with the goal to instruct the backup script to refetch these files)
I've tried to get variations of the following to no avail.
[main_server] $ rsync -n ~/mydir/ user#backup_server:~/mydir
I cannot do rsync to backup the directories itself because it takes way too long (8-24hrs). Instead I run multiple threads of scp to fetch files in batches. This completes regularly <1hr. However, occasionally I find a few files that were somehow missed (perhaps dropped connection).
Speed is a priority, so file sizes should be sufficient. But I'm open to including a checksum, provided it doesn't slow the process down like I find with rsync.
Here's my test process:
# Generate Large Files (1GB)
for i in {1..100}; do head -c 1073741824 </dev/urandom >foo-$i ; done
# SCP them from src to dest
for i in {1..100}; do ( scp ~/mydir/foo-$i user#backup_server:~/mydir/ & ) ; sleep 0.1 ; done
# Confirm destination has everything from source
# This is the point of the question. I've tried:
rsync -Sa ~/mydir/ user#backup_server:~/mydir
# Way too slow
What do you recommend?
By default, rsync uses the quick check method which only transfers files that differ in size or last-modified time. As you report that the sizes are unchanged, that would seem to indicate that the timestamps differ. Two options to handlel this are:
Use -p to preserve timestamps when transferring files.
Use --size-only to ignore timestamps and transfer only files that differ in size.
I have a script that takes in a unique location number from a file. These are formatted like this 7325-05, 5269-09 and 7479-14, for example. The first four numbers are what the folder is called and the second number is the first two characters of the filename unique within each folder.
So I wrote this script to use locate and find to get the full path of the folder and then use a wildcard to download the specific file using rsync. Here's the script that I have right now:
#!/bin/bash
#IFS='
#'
oIFS=$IFS
IFS=$'\n'
while read line;
do
name=$line;
folder=${line:0:4}
track=${line: -2}
folderlocation="$(locate -r '/'$folder'$')"
filelocation="$(find "$folderlocation" -type f -name "$track*")"
rsync -vazhn --progress "$filelocation" /cygdrive/c/
# mkdir /cygdrive/c/test/"$folder"
# cp -rvi "$filelocation" /cygdrive/c/test/"$folder"
echo "";
done < $1
The code using cp that is commented out works just fine. I would just really prefer to use rsync, mainly due to better feedback and more accurate progress reporting, as far as I can tell.
Using the code as pasted above (with rsync) throws this error:
./filelocator classic-locations.txt
sending incremental file list
rsync: change_dir "/home/emil//\\sandrew-nas/SMMUSIC/MMIMUSIC/7001-8000/7201-7300/7252/Unknown Album (29-12-2012 09-52-02)" failed: No such file or directory (2)
sent 20 bytes received 12 bytes 64.00 bytes/sec
total size is 0 speedup is 0.00 (DRY RUN)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1165) [sender=3.1.1]
sending incremental file list
rsync: change_dir "/home/emil//\\sandrew-nas/SMMUSIC/MMIMUSIC/7001-8000/7201-7300/7252/Unknown Album (29-12-2012 09-52-02)" failed: No such file or directory (2)
sent 20 bytes received 12 bytes 64.00 bytes/sec
total size is 0 speedup is 0.00 (DRY RUN)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1165) [sender=3.1.1]
As you can see, my home folder (where I issue the command) is suddenly included in the script, leading me to believe that a variable or wildcard is being expanded in the local shell, but no amount of escape characters seem to accomplish what I want with rsync.
We have bash script (job wrapper) that writes to a file, launches a job, then at job completion it appends to the file information about the job. The wrapper is run on one of several thousand batch nodes, but has only cropped up with several batch machines (I believe RHEL6) accessing one NFS server, and at least one known instance of a different batch job on a different batch node using a different NFS server. In all cases, only one client host is writing to the files in question. Some jobs take hours to run, others take minutes.
In the same time period that this has occurred, there seems to be 10-50 issues out of 100,000+ jobs.
Here is what I believe to effectively be the (distilled) version of the job wrapper:
#!/bin/bash
## cwd is /nfs/path/to/jobwd
## This file is /nfs/path/to/jobwd/job_wrapper
gotEXIT()
{
## end of script, however gotEXIT is called because we trap EXIT
END="EndTime: `date`\nStatus: Ended”
echo -e "${END}" >> job_info
cat job_info | sendmail jobtracker#example.com
}
trap gotEXIT EXIT
function jobSetVar { echo "job.$1: $2" >> job_info; }
export -f jobSetVar
MSG=“${email_metadata}\n${job_metadata}”
echo -e "${MSG}\nStatus: Started" | sendmail jobtracker#example.com
echo -e "${MSG}" > job_info
## At the job’s end, the output from `time` command is the first non-corrupt data in job_info
/usr/bin/time -f "Elapsed: %e\nUser: %U\nSystem: %S" -a -o job_info job_command
## 10-360 minutes later…
RC=$?
echo -e "ExitCode: ${RC}" >> job_info
So I think there are two possibilities:
echo -e "${MSG}" > job_info
This command throws out corrupt data.
/usr/bin/time -f "Elapsed: %e\nUser: %U\nSystem: %S" -a -o job_info job_command
This corrupts the existing data, then outputs it’s data correctly.
However, some job, but not all, call jobSetVar, which doesn't end up being corrupt.
So, I dig into time.c (from GNU time 1.7) to see when the file is open. To summarize, time.c is effectively this:
FILE *outfp;
void main (int argc, char** argv) {
const char **command_line;
RESUSE res;
/* internally, getargs opens “job_info”, so outfp = fopen ("job_info", "a”) */
command_line = getargs (argc, argv);
/* run_command doesn't care about outfp */
run_command (command_line, &res);
/* internally, summarize calls fprintf and putc on outfp FILE pointer */
summarize (outfp, output_format, command_line, &res); /
fflush (outfp);
}
So, time has FILE *outfp (job_info handle) open the entire time of the job. It then writes the summary at the end of the job, and then doesn’t actually appear to close the file (not sure if this is necessary with fflush?) I've no clue if bash also has the file handle open concurrently as well.
EDIT:
A corrupted file will typically end consist of the corrupted part, followed with the non-corrupted part, which may look like this:
The corrupted section, which would occur before the non-corrupted section, is typically largely a bunch of 0x0000, with maybe some cyclic garbage mixed in:
Here's an example hexdump:
40000000 00000000 00000000 00000000
00000000 00000000 C8B450AC 772B0000
01000000 00000000 C8B450AC 772B0000
[ 361 x 0x00]
Then, at the 409th byte, it continues with the non-corrupted section:
Elapsed: 879.07
User: 0.71
System: 31.49
ExitCode: 0
EndTime: Fri Dec 6 15:29:27 PST 2013
Status: Ended
Another file looks like this:
01000000 04000000 805443FC 9D2B0000 E04144FC 9D2B0000 E04144FC 9D2B0000
[96 x 0x00]
[Repeat above 3 times ]
01000000 04000000 805443FC 9D2B0000 E04144FC 9D2B0000 E04144FC 9D2B0000
Followed by the non corrupted section:
Elapsed: 12621.27
User: 12472.32
System: 40.37
ExitCode: 0
EndTime: Thu Nov 14 08:01:14 PST 2013
Status: Ended
There are other files that have much more random corruption sections, but more than a few were cyclical similar to above.
EDIT 2: The first email, sent from the echo -e statement goes through fine. The last email is never sent due to no email metadata from corruption. So MSG isn't corrupted at that point. It's assumed that job_info probably isn't corrupt at that point either, but we haven't been able to verify that yet. This is a production system which hasn't had major code modifications and I have verified through audit that no jobs have been ran concurrently which would touch this file. The problem seems to be somewhat recent (last 2 months), but it's possible it's happened before and slipped through. This error does prevent reporting which means jobs are considered failed, so they are typically resubmitted, but one user in specific has ~9 hour jobs in which this error is particularly frustrating. I wish I could come up with more info or a way of reproducing this at will, but I was hoping somebody has maybe seen a similar problem, especially recently. I don't manage the NFS servers, but I'll try to talk to the admins to see what updates the NFS servers at the time of these issues (RHEL6 I believe) were running.
Well, the emails corresponding to the corrupt job_info files should tell you what was in MSG (which will probably be business as usual). You may want to check how NFS is being run: there's a remote possibility that you are running NFS over UDP without checksums. That could explain some corrupt data. I also hear that UDP/TCP checksums are not strong enough and the data can still end up corrupt -- maybe you are hitting such a problem (I have seen corrupt packets slipping through a network stack at least once before, and I'm quite sure some checksumming was going on). Presumably the MSG goes out as a single packet and there might be something about it that makes checksum conflicts with the garbage you see more likely. Of course it could also be an NFS bug (client or server), a server-side filesystem bug, busted piece of RAM... possibilities are almost endless here (although I see how the fact that it's always MSG that gets corrupted makes some of those quite unlikely). The problem might be related to seeking (which happens during the append). You could also have a bug somewhere else in the system, causing multiple clients to open the same job_info file, making it a jumble.
You can also try using different file for 'time' output and then merge them together with job_info at the end of script. That may help to isolate problem further.
Shell opens 'job_info' file for writing, outputs MSG and then shall close its file descriptor before launching main job. 'time' program opens same file for append as stream and I suspect the seek over NFS is not done correctly which may cause that garbage. Can't explain why, but normally this shall not happen (and is not happening). Such rare occasions may point to some race condition somewhere, can be caused by out of sequence packet delivery (due to network latency spike) or retransmits which causes duplicate data, or a bug somewhere. At first look I would suspect some bug, but that bug may be triggered by some network behavior, e.g. unusually large delay or spike of packet loss.
File access between different processes are serialized by kernel, but for additional safeguard may be worth adding some artificial delays - sleep timers between outputs for example.
Network is not transparent, especially a large one. There can be WAN optimization devices which are known to cause application issues sometimes. CIFS and NFS are good candidates for optimization over WAN with local caching of filesystem operations. Might be worth looking for recent changes with network admins..
Another thing to try, although can be difficult due to rare occurrences is capture of interesting NFS sessions via tcpdump or wireshark. In really tough cases we do simultaneous capturing on both client and server side and then compare the protocol logic to prove that network is or is not working correctly. That's a whole topic in itself, requires thorough preparation and luck but usually a last resort of desperate troubleshooting :)
It turns out this was actually another issue altogether, apparently to do with an out-of-date page being written to disk.
A bug fix was supplied to the linux-nfs implementation:
http://www.spinics.net/lists/linux-nfs/msg41357.html
I have the following code that tries to tie arrays to files. Except, when I run this code, it only creates 2045 files. What is the issue here?
#!/usr/bin/perl
use Tie::File;
for (my $i = 0; $i < 10000; $i++) {
#files{$i} = ();
tie #{$files{$i}}, 'Tie::File', "files//tiefile$i";
}
Edit: I am on windows
You are accumulating open file handles (see ulimit -n, setrlimit RLIMIT_NOFILE/RLIMIT_OFILE), and you ultimately hit a 2048 open file descriptors limit (2045 + stdin + stdout + stderr.)
Under Windows you will have to rewrite your application so that it has at most 2048 open file handles at any one time, since the 2048 limit is hard limit (cannot be modified) in MSVC's stdio.
On Linux machines go to /etc/security/limits.conf and add or modify these lines
* soft nofile 10003
* hard nofile 10003
This will increase the number of files each process can have open to 10003 (remember that you always start with three open: stdin, stdout, and stderr).
Based on you comments it sounds like you are using a Win32 machine. I can't find a way to increase the number of open files per process, but you might, and I stress might, be able to handle this through fork'ing (which is really threading on Win32).