I have an application which is configured to use
~/Account/LogOn
in the
web.config
file for the authentication.
I would like to have the URL just point to www.example.com instead of www.example.com/Account/LogOn.
I have tried to have the routing configuration as follows, but it does not work
routes.MapRoute(
"Default", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Account", action = "LogOn", id = "" }
);
Kindly suggest the right practice that can be used. I tried to remove the loginurl from web.config file but it is not of use and shows authorization error while running.
I'm not sure you may change routing to have the same address for two actions: Home/Index and Account/LogOn. But if you want change default logOn routing you need 2 steps:
1) Add one more routing:
//This route returns www.example.com/Login
routes.MapRoute(
"MyRoute",
"Login",
new { controller = "Account", action = "LogOn", id = "" }
);
2) Make changes in web.config:
~/Login
In the same way you may create any other routing for LogOn
As for me the only solution to have login on Index page is to do like this (and delete redirect from web.config):
#if(!Request.IsAuthenticated)
{
//PartialView with Log In form
}
else
{
// Your Index page content
}
Related
I would like to create a member area on my site with the following URL patterns:
Pattern for logged out user:
domain.com
domain.com/About
domain.com/Blog
domain.com/Blog/1 (where 1 is the post ID)
But I also have a member area where I prefix the Url with Member like this:
domain.com/Member/MyProfile
domain.com/Member/MySettings
This seems simple, but I can't see an obvious way to make routing rules for this. I have:
routes.MapRoute(
"Member", // Route name
"Member/{controller}/{action}/{id}", // URL with parameters
new { controller = "Task", action = "Index", id = UrlParameter.Optional } // Parameter defaults
);
routes.MapRoute(
"Default", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults
);
This works great for the member when you are logged in, but unfortunately the first rule also matches the logged out view and Url.Action("Blog", "Home") produces a Url that looks like this:
domain.com/Member/Home/Blog
How do I tell Url.Action that it must form Urls with the default rule outside the member area?
You could use a real MVC area instead of trying to simulate one. There's also a video you might checkout. The idea is that you leave your default route definition in Global.asax and then add a Member area to your site which will have a separate route configuration.
I don't know why I have such problems with ASP.NET MVC routing. I wish there was a tool that showed me which routes I had currently setup. Regardless,
In my global.asax.cs file I have the following:
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
"SignUp", // Route name
"account/{controller}/{action}", // URL with parameters
new { controller = "Home", action = "Register" } // Parameter defaults
);
routes.MapRoute(
"Default", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults
);
}
I have the following defined in HomeController.cs
public ActionResult Register()
{
return View();
}
I was expecting to be able to access this page by visiting /account/register in my browser. However, I continue to get a 404. What am I doing wrong?
/Account/Register matches your first route.
The word Register is matched to the {controller}, so it looks for a controller named RegisterController.
replace
routes.MapRoute(
"SignUp", // Route name
"account/{controller}/{action}", // URL with parameters
new { controller = "Home", action = "Register" } // Parameter defaults
);
with
routes.MapRoute(
"SignUp", // Route name
"account/{action}", // URL with parameters
new { controller = "Home" } // Parameter defaults
);
This will mean /account/register will route to the Register action on the Home controller. It will also mean that action links and other links you generate via #Html.ActionLink("Register", "Register", "Home") will generate the URL /account/register
Think of the 'URL with paramters' as a pattern that the URL will be matched against.
The problem with your original route map is that it is looking for a URL like this /account/controllername/actionname. So, when you go /account/register - it is taking register as the controller name, and taking the default action name (in this case register) - and as the 'register' action does not exist in the 'register' controller - you are getting a 404.
UPDATED
I updated my suggested route as per Robert's comments.
It is also worth noting, as Robert states, that this whole thing could be made more simple by making a 'Account' controller, and moving the 'Register ' action there. Then you could delete the 'SignUp' route, and just use default routing. If you thought about it, you'd agree that this would be a better place for a 'Register' action than the 'Home' controller.
Try using this nugget package http://nuget.org/packages/Glimpse.Mvc3
You can find more info about glimpse on http://getglimpse.com/
I have added a controller to my project named UserManager (automatically generated from the ado.net framework)
When I start the application, attempts to navigate to http://server/UserManager/ are met with a 404 error, but if I go to http://server/UserManager/Index the action is found and executes properly.
Is this a case of the controller not being called or is it just not treating index as the default action. Where are these properties set?
UPDATE
It seems that the problem derived from the fact that the default route is set to
"Default", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Permits", action = "ListApplications", id = UrlParameter.Optional }
This conflicts with the naming scheme for Usermanager (where the default is Index)
I struggled with ohow to add alternate routes that provided for default actions, but eventually figured out that the order of route addition determines which route takes the request (the earlier the route is added, the more chances it has to meet the criteria.)
Thanks
You need to ensure that the default route mapping specifies "Index" as the default action in your global.asax file.
Check that you have the following setting in your global.asax file:
routes.MapRoute(
"Default", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
IN REPLY TO YOUR COMMENT:
Only by way of adding new route mappings. You also need to be aware that the first matching route mapping will be applied, so the order you specify the mappings in Global.asax is crucial.
For example, we wanted our FAQ controller to work with a URL http://domain/faq/{id} without the action specified in the URL, so we declared the following mapping before the default:
routes.MapRoute("Faq", "Faq/{id}", new { controller = "Faq", action = "Answer" });
In Global.asax.cs, check the default route is set up:
routes.MapRoute(
"Default",
"{controller}/{action}/{id}", new {
controller = "Home",
action = "Index",
id = UrlParameter.Optional}
);
Also, check that the controller is called UserManagerController, and derives from Controller
I have MVC 3 application and I want to know how to set the domain name to route to specific controller and action (without specify them), e.g.
MyDomain.com to route to controller -> Landing, action -> landing.
The application is hosted on IIS 6.
Regards,
may.
You want to change the parameter defaults in the default route in global.asax:
routes.MapRoute(
"Default", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Landing", action = "Landing", id = UrlParameter.Optional } // Parameter defaults
);
In my ASP.NET MVC3 project, I have a folder called Content (the default folder for an MVC project). But I also have a controller called Content. And when I want to use the default actions of this controller, I simply use http://domain/content/, which is equivalent to http://domain/content/index. But IIS returns 403 error and thinks that I'm gonna get the directory list of the Content Folder. Well, this question is already discussed in this question. But I don't know how to rewrite my URL to append the default action to it. May someone help please.
You can get around this by changing routing configuration to specify:
routes.RouteExistingFiles = true;
You will then need to set up some ignore rules to prevent genuine static content being gobbled up by the routing engine.
For example, I have a folder called Touch in my app, and I also have a specific route for Touch. So the working config is:
routes.RouteExistingFiles = true;
routes.IgnoreRoute("Touch/Client/{*touchclientversion}", new { touchclientversion = #"(\d*)(/*)" });
I agree that this kind of thing should generally be avoided, but sometimes it's nice to have pretty URLs :-)
You can add a default route like this:
routes.MapRoute(
"Default", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Home", action = "Index", id = "" } // Parameter defaults
);
In your case:
routes.MapRoute(
"DefaultContent", // Route name
"{controller}/{action}/{id}", // URL with parameters
new { controller = "Content", action = "Index", id = "" } // Parameter defaults
);