Hi I've recently downloaded Laravel as a PHP framework, I've installed composer and have got that working, I've got it to create my project as per the Laravel website
composer create-project laravel/laravel --prefer-dist
However when I use the above line this installs my project in the c:\users\guti directory however I want it to be installed in c:\xampp\htdocs.
I've seen another question on stackoverflow and it talks about amending the composer.json file but I'm not sure whether this is the route I should be taking as I've done a computer search for this file and this file exists as part of the laravel framework so does it make sense to amend this file?
Any composer experts on hand to point me in the right direction?
composer create-project laravel/laravel .
Installs in your current directory =)
You should specify your destination directory where you want to create the project, from the command prompt, type cd C:\xampp\htdocs then press enter. After that, type following code on the command prompt and press enter
composer create-project laravel/laravel my-laravel-project
Here my-laravel-project will be your project folder.
The composer.json file is used to setup some configurations (for Dependency management) during installation of the package via packagist.
Visit getcomposer.org for more information.
Whenever
composer create-project laravel/laravel .
Doesn't work properly for whatever reason, I just
laravel new temp
And then move the contents of the new application into the folder I do want ; )
I needed to do this myself. In the directory I wanted it installed, I did:
laravel new --force .
And it seems to be working well so far.
This works for me on Ubuntu 20.04, Composer version 2.1.6:
cd your-directory
composer create-project laravel/laravel ./
TL;DR
composer create-project --prefer-dist laravel/laravel directory-name
Move files to preferred folder if needed (e.g. to ../)
Why don't laravel new /.?
laravel new project-name not always works good on different systems, so you need to edit PATH variable multiple times to add laravel command to cli (at least on OSX it's not that easy as on Ubuntu).
composer create-project --prefer-dist . may not work because of not empty directory (e.g. in JetBrains IDE's, which creates folder .idea/ which doesn't shows in IDE's 'project' view, only on 'project files'). Exception message looks like
[InvalidArgumentException]
Project directory ./ is not empty.
So, if you know what you doing, do as you wish, on the other way, especially if you want as few problems as possible, do the steps from the top lines of this answer.
P.S. I'm speaking english not as good as i want to do, so, anyone, feel free to correct me.
Related
I'm trying to install and run Laravel on my Mac machine, but my command line doesn't recognize laravel and responds to all laravel commands with "bash: laravel: command not found". I know that the composer bin folder needs to be added to the $PATH, so I went to my home folder and, since none of the profile files I was told to look for were present, I created a .bash_profile file and added the line "export PATH = $HOME/.composer/vendor/bin:$PATH" to it. However, after saving this and restarting my terminal, laravel is still not recognized. Does anyone see what I'm doing wrong here?
I assume you are trying to do laravel new blog. To work you should call composer global require laravel/installer.
In case this doesn't work for you use composer create-project --prefer-dist laravel/laravel blog
I found that web.config is included when I install Laravel with:
composer create-project --prefer-dist laravel/laravel blog
but not when I install Laravel using the Laravel installer, with:
laravel new blog
(as per https://laravel.com/docs/5.8/installation)
I've subsequently found a few other differences e.g. devDependencies versions in package.json, some config settings in broadcasting.php, cache.php, database.php.
Can anyone explain to me what is responsible for this difference? Is one install method 'better' than the other?
Thanks
Chris
The difference between both commands is that the composer command uses packagist to get the latest package from GitHub the first time or a cached version, while laravel new blog downloads a zip file from the Laravel server which has the latest version and uses that. Both commands run the so called 'after install' scripts, creating an environment file and setting the application key.
When you don't want a cached version but a new one using composer, run composer clear-cache first, to delete the local cache composer creates.
If you want to see the difference for yourself, compare the composer.json of the base Laravel project (https://www.github.com/laravel/laravel) and the NewCommand.php file in the src directory of the Laravel installer (https://www.github.com/laravel/installer)
Edit
After running both commands, the only difference I could really find was the order in which some things are done, but both generate a working system. Fun thing I noticed is that laravel new project comes with a yarn.lock file, but without a readme.md and composer composer create-project vice versa.
I am new to Laravel and Composer, and am following some guides including LaraCasts.com . One of the things that need to be done is use Composer to require packages to use in the Laravel project. However, this doesn't work for me.
I installed Laravel using the composer create-project method (http://laravel.com/docs/5.0), and so far everything was fine. However, any package I "require" now actually goes into the C:\Users\user\vendor folder, and the composer.json file is in C:\Users\user.
I understand that Composer is supposed to separate between projects as opposed to being global like PEAR. So how do I specify that I'm working on a specific project and require everything into that project? Also, what is the actual path where I'm supposed to put packages in Laravel, in case I want to do it manually?
I am using Windows 7 and Xampp.
When you run composer require {pacakage}, make sure you use the cd command (Change Directory - I think) into the project you want to install the package for. So if you're in Xampp it could be something like cd C:\xampp\htdocs\my-laravel-project\ or whatever the path to your project is, then run your composer require {pacakage}.
I believe it's installing it in C:\Users\user\vendor as when you open your terminal/command prompt the default location is C:\Users\{username}\.
Please make sure you ran the composer create-project in your web root, for Xampp I think it's C:\xampp\htdocs\ but it could be different depending on how you set up Xampp when you installed it.
I am new to laravel, composer, and windows terminal. I am trying to setup laravel on my local host. I currently have wamp installed and I have used it before to create basic websites. However, I am now doing a bigger project that needs a framework so I decided to learn Laravel. I installed composer as indicated in the directions, but when i run the command
"C:\wamp\www>composer create-project laravel/laravel laravel"
i generate an error message that says
"[InvalidArgumentException] Project directory laravel/ is not empty."
When I open a browser and navigate to "localhost/laravel/public" I encounter the error message from the title of this thread:
"Warning:require(C:\wamp\www\laravel\bootstrap/../vendor/autoload.php): failed to open stream: No such
I have also added the appropriate environment variables from the composer instructions.
I am really lost at this point, and I have spent the past 4 hours trying to debug this.
I am running Windows 8 x64.
Edit:
I tried running composer install in C:\wamp\www and received an error message
Composer could not find the config file:
C:\ProgramData]ComposerSetup\bin Ti initialize a project, please
create a composer.json file as described in the
http://getcomposer.org/ "Getting Started" section "
The dependencies for your project are not installed. Just download composer from GetComposer.org and install it on your Windows Machine. Then navigate to your project root, you will see a composer.json file there. That file specifies all the dependencies of the project. Run composer update in that directory. Composer will then update or install all required dependencies and your application won't show the error then.
cd \wamp\www\yourproject
composer update
"C:\wamp\www>composer create-project laravel/laravel laravel"
"[InvalidArgumentException] Project directory laravel/ is not empty."
This means C:\wamp\www\laravel already existed when you attempted to run the command. Remove the folder, or change the create-project command to use a different folder name for your new project.
"Warning:require(C:\wamp\www\laravel\bootstrap/../vendor/autoload.php): failed to open stream: No such
You need to do a composer install from C:\wamp\www\laravel.
I figured it out! I was missing a folder called "vendor" and a file inside bootstrap called "compiled.php" Sorry for the inconvenience, and thank you for trying!
use the following command to get vendor folder in your project
composer install --no-scripts
i had the same problem but i just ran this command
composer install
to install all the dependencies
First,I use wamp on my Window7.I open php-openssl,and I git pull the laravel from github.com,and then I put laravel on my d:/wamp/www/, I change the c:/windows/system32.But when I open the url
http://localhost/laravel/public
I see this question.
I am a newbie on laravel,and without install on Ubuntu.Where is my wrong, without no pear,or something else? Thank you!
You need to run composer install in a command prompt.
If you do not have composer, download the phar file from their website.
Place the file you just downloaded into the laravel directory.
Then, make sure that the absolute path to php.exe is added to your PATH environment variable.
Then, you can hold down shift, and right click anywhere inside the laravel directory, and open up a command prompt window. Then, run php composer.phar install. The process may take some time, depending on the speed of your internet connection.
Instead of using the above method, you can download the Composer installer for Windows, install it, and just run composer install.
Note that you only need to do this in order to put the Laravel components together. You do not need to run it on a live server.
Please consult the Laravel Docs for installation and other instructions: http://laravel.com/docs
Try This :
Installing Laravel 4 on WAMP
1. Enable OpenSSL
OpenSSL must be enabled in the PHP configuration.
Edit php.ini in your WAMP’s PHP folder, e.g.:
C:\wamp\bin\php\php5.4.12\
Note: This is not the php.ini in C:\wamp\bin\apache\Apache2.4.4\bin.
Find the following line and remove the semicolon save it:
;extension=php_openssl.dll changed to extension=php_openssl.dll
2. Install Composer
(i).Download the Composer Windows installer from getcomposer.org.
(ii). Run the installer.
(iii). When it asks for the location of php.exe, point it to the executable in your WAMP’s PHP folder, e.g.:
C:\wamp\bin\php\php5.4.12\
(iv). Finish the installation.
(v). Open a command-line interface (cmd) and type:
composer
It should return a list of options. If you get an error, restart your computer and try again.
Composer has now been installed and added to your PATH environment variable. This means you can run it from any directory using the command-line interface.
Now we need to install Composer. This is a dependency manager that will download the latest release of Laravel and specific versions of Laravel’s dependencies, such as Doctrine and Symfony.
3.Install Laravel
Now that Composer has been installed, Composer can download and install Laravel onto your system.
(i). Open a command-line interface (cmd).
(ii). Go to the directory in which you want to install Laravel. This is usually your development directory. In this tutorial, we’ll use C:\wamp\www\laravel
(iii). Instruct Composer to install Laravel into a project directory. we use project name myproject.
composer create-project laravel/laravel myproject --prefer-dist
Note: This will install Laravel in a subdirectory myproject of the current working directory.
Three type of installation to be completed
Now your project was running directory like
C:\wamp\www\laravel\myproject\public\
After completed put tick mark and increase the point....
Do php composer.phar dump-autoload or php artisan dump-autoload