I have a batch file that is executed by a scheduled windows service every 5 minutes. The batch files executes mget for a specific filemask: *.ext.
After mget it does mdel *.ext.
Recently I encountered a problem: When a file z.ext gets created between the execution of mget and mdel, that file gets deleted but it was not in the mget. Which off course makes sense.
So now I am looking for the proper windows ftp commands that will loop through the files and does a mget and mdel file by file.
Is that possible?
ftp scriptng is very limited, but I think you can use this approach. Basically, you have to run the ftp twice, first to collect the list of files to download, then the second time to download (and delete) each file (combined with lots of cmd scripting) You still don't get any error handling and ftp servers are not exactly known for their error tolerance.
The relevant example from the website above is:
#Echo Off
REM -- Define File Filter, i.e. files with extension .txt
Set FindStrArgs=/E /C:".txt"
REM -- Extract Ftp Script to create List of Files
Set "FtpCommand=ls"
Call:extractFileSection "[Ftp Script 1]" "-">"%temp%\%~n0.ftp"
Rem Notepad "%temp%\%~n0.ftp"
REM -- Execute Ftp Script, collect File Names
Set "FileList="
For /F "Delims=" %%A In ('"Ftp -v -i -s:"%temp%\%~n0.ftp"|Findstr %FindStrArgs%"') Do (
Call Set "FileList=%%FileList%% "%%A""
)
REM -- Extract Ftp Script to download files that don't exist in local folder
Set "FtpCommand=mget"
For %%A In (%FileList%) Do If Not Exist "%%~A" Call Set "FtpCommand=%%FtpCommand%% "%%~A""
Call:extractFileSection "[Ftp Script 1]" "-">"%temp%\%~n0.ftp"
Rem Notepad "%temp%\%~n0.ftp"
For %%A In (%FtpCommand%) Do Echo.%%A
REM -- Execute Ftp Script, download files
ftp -i -s:"%temp%\%~n0.ftp"
Del "%temp%\%~n0.ftp"
GOTO:EOF
:extractFileSection StartMark EndMark FileName -- extract a section of file that is defined by a start and end mark
:: -- [IN] StartMark - start mark, use '...:S' mark to allow variable substitution
:: -- [IN,OPT] EndMark - optional end mark, default is first empty line
:: -- [IN,OPT] FileName - optional source file, default is THIS file
:$created 20080219 :$changed 20100205 :$categories ReadFile
:$source http://www.dostips.com
SETLOCAL Disabledelayedexpansion
set "bmk=%~1"
set "emk=%~2"
set "src=%~3"
set "bExtr="
set "bSubs="
if "%src%"=="" set src=%~f0& rem if no source file then assume THIS file
for /f "tokens=1,* delims=]" %%A in ('find /n /v "" "%src%"') do (
if /i "%%B"=="%emk%" set "bExtr="&set "bSubs="
if defined bExtr if defined bSubs (call echo.%%B) ELSE (echo.%%B)
if /i "%%B"=="%bmk%" set "bExtr=Y"
if /i "%%B"=="%bmk%:S" set "bExtr=Y"&set "bSubs=Y"
)
EXIT /b
[Ftp Script 1]:S
!Title Connecting...
open example.com
username
password
!Title Preparing...
cd public_html/MyRemoteDirectory
lcd c:\MyLocalDirectory
binary
hash
!Title Processing... %FtpCommand%
%FtpCommand%
!Title Disconnecting...
disconnect
bye
Probably better to just do it in python or some other scripting environment (assuming you don't have deployment issues.)
Related
I'm trying to use 7-Zip for backup purposes.
I have already wrote script for full backup:
#echo off
set source="c:\Source"
set destination="C:\Dest"
set dd=%DATE:~0,2%
set mm=%DATE:~3,2%
set yyyy=%DATE:~6,4%
set curdate=%dd%-%mm%-%yyyy%
"C:\Program Files\7-Zip\7z.exe" a -tzip -ssw -mx6 -r0 %destination%\Full_%curdate%.zip %source%
The new script intended for incremental backup is started after the full backup is made. But I don't really get how to make my second script to read files from directory and look for the file staring like full_xx_xx_xxxx.zip and assign its filename to a variable and then pass it to the script for incremental backup.
I tried script below, but it's not working:
#echo off
set source="c:\Source"
set destination="c:\Dest"
set exten="Full_*.zip"
set passwd="NAS"
set dd=%DATE:~0,2%
set mm=%DATE:~3,2%
set yyyy=%DATE:~6,4%
set curdate=%dd%-%mm%-%yyyy%
for %%a in %exten do echo %%a
"C:\Program Files\7-Zip\7z.exe" u -tzip -ssw -r0 %destination%\%%a.zip -u- -up0q3x2z0!"%destination%\diff_%date%.zip" %source%
There are multiple mistakes in both scripts.
I recommend reading first How to set environment variables with spaces? and Why is no string output with 'echo %var%' after using 'set var = text' on command line?. The syntax set variable="value in quotes" is often not good because it assigns the string "value in quotes" with the double quotes and all trailing spaces/tabs which might exist also in batch file to the environment variable with name variable. This syntax is problematic on concatenating the string value of the environment variable with other strings as done in posted code with %destination% because of the " being now somewhere in middle of the final argument string instead of enclosing the entire argument string. Better is the syntax set "variable=value without or with spaces" with " left to variable name because of the double quotes are interpreted now as argument string separators and perhaps existing spaces/tabs on line after second " are ignored by Windows command processor.
The usage of dynamic environment variable DATE makes it possible to quickly get current locale date in a format usable for file/folder names. But it must be taken into account that the date format of value of DATE depends on region/country/locale set for the user account which is used on running the batch file. I suppose that echo %DATE% results in an output of a date in format DD.MM.YYYY and so the command lines using DATE are correct for you with your user account according to the configured country.
The FOR command line is completely wrong and results in an exit of batch file execution with an error message output by cmd.exe interpreting the batch file line by line. This error output can be seen on running the batch file from within a command prompt window instead of double clicking on the batch file. See debugging a batch file for details on how to debug a batch file to find syntax errors like this reported by Windows command processor during execution of a batch file.
So I suggest for the first batch file:
#echo off
set "Source=C:\Source"
set "Destination=C:\Dest"
set "CurrentDate=%DATE:~6,4%-%DATE:~3,2%-%DATE:~0,2%"
"%ProgramFiles%\7-Zip\7z.exe" a -tzip -ssw -mx6 -r0 "%Destination%\Full_%CurrentDate%.zip" "%Source%"
The current locale date is assigned to the environment variable CurrentDate in format YYYY-MM-DD instead of DD-MM-YYYY. The date format YYYY-MM-DD is the international date format according to ISO 8601. It has one big advantage in comparison to all locale date formats in file names: The file names with date in format YYYY-MM-DD sorted alphabetically as usual are at the same time sorted chronological. That makes it much easier for people and scripts finding a specific file in a list of file names with date in file name.
I am not really sure what you want to do with the second batch file. So I can only suppose what you want to do and suggest for the second batch file:
#echo off
set "Source=C:\Source"
set "Destination=C:\Dest"
set "CurrentDate=%DATE:~6,4%-%DATE:~3,2%-%DATE:~0,2%"
set "NamePattern=Full_*.zip"
for /F "skip=1 eol=| delims=" %%I in ('dir "%Destination%\%NamePattern%" /A-D /B /O-N 2^>nul') do (
"%ProgramFiles%\7-Zip\7z.exe" u -tzip -ssw -r0 "%Destination%\%%I" -u- -up0q3x2z0!"%Destination%\Diff_%CurrentDate%.zip" "%Source%"
goto Done
)
:Done
The FOR loop runs command DIR with using a separate command process started in background to get the list of Full_*.zip file names in destination directory sorted reverse by name which means the full backup ZIP file created today before with first batch file is at top on using date format YYYY-MM-DD and the previously created ZIP file from yesterday (or whenever the last but one full ZIP file was created) is output as second line.
FOR skips the first line with ZIP file name with current date and runs 7-Zip with previously created ZIP file (yesterday) to create the difference ZIP file. Then the FOR loop is exited without processing all other full ZIP files with a jump to the label below the FOR loop.
Both batch files together:
#echo off
setlocal EnableExtensions DisableDelayedExpansion
set "Source=C:\Source"
set "Destination=C:\Dest"
set "CurrentDate=%DATE:~6,4%-%DATE:~3,2%-%DATE:~0,2%"
set "NamePattern=Full_*.zip"
rem Create full ZIP backup.
"%ProgramFiles%\7-Zip\7z.exe" a -tzip -ssw -mx6 -r0 "%Destination%\Full_%CurrentDate%.zip" "%Source%"
rem Create difference ZIP backup with files added/changed in source directory
rem in comparison to the files compressed into last but on full ZIP backup.
for /F "skip=1 eol=| delims=" %%I in ('dir "%Destination%\%NamePattern%" /A-D /B /O-N 2^>nul') do (
"%ProgramFiles%\7-Zip\7z.exe" u -tzip -ssw -r0 "%Destination%\%%I" -u- -up0q3x2z0!"%Destination%\Diff_%CurrentDate%.zip" "%Source%"
goto Done
)
:Done
endlocal
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
dir /?
echo /?
endlocal /?
for /?
rem /?
set /?
setlocal /?
I have a folder that contains files; each document should have .pdf and .xml format. I need to write a BAT file to run from a scheduled task to verify that both documents exist for each.
My logic is:
loop through files in the folder
strip each file to its name without extension
check that same name files exist for both .xml and pdf.
if not mark a flag variable as problem
when done, if the flag variable is marked, send an Email notification
I know how to use blat to sending email, but I'm having trouble to execute the loop. I found a way to get path and file name without extension but can't merge them.
I've used batch files a few time, before but I'm far from an expert. What am I missing?
Here's the code I have so far:
set "FolderPath=E:\TestBat\Test\"
echo %FolderPath%
for %%f in (%FolderPath%*) do (
set /p val=<%%f
For %%A in ("%%f") do (
Set Folder=%%~dpA
Set Name=%%~nxA
)
echo Folder is: %Folder%
echo Name is: %Name%
if NOT EXIST %FolderPath%%name%.xml
set flag=MISSING
if NOT EXIST %FolderPath%%name%.pdf
set flag=MISSING
)
echo %Flag%
pause
There is no need for fancy code for a task such as this:
#Echo Off
Set "FolderPath=E:\TestBat\Test"
If /I Not "%CD%"=="%FolderPath%" PushD "%FolderPath%" 2>Nul||Exit/B
Set "flag="
For %%A In (*.pdf *.xml) Do (
If /I "%%~xA"==".pdf" (If Not Exist "%%~nA.xml" Set "flag=MISSING")
If /I "%%~xA"==".xml" (If Not Exist "%%~nA.pdf" Set "flag=MISSING")
)
If Defined flag Echo=%flag%
Timeout -1
Something like this :
set "FolderPath=E:\TestBat\Test\"
pushd "%FolderPath%"
for %%a in (*.xml) do (
if exist "%%~na.pdf"(
echo ok
) else (
rem do what you want here
echo Missing
)
)
popd
Is this what you want?
#echo off
setlocal enabledelayedexpansion
set "FolderPath=E:\TestBat\Test\"
echo !FolderPath!
for /f "usebackq delims=" %%f in (`dir !FolderPath! /B`) do (
set /p val=<%%f
For %%A in ("%%f") do (
Set Folder=%%~dpA
Set name=%%~nxA
)
echo Folder is: !Folder!
echo Name is: !name!
if NOT EXIST !FolderPath!!name!.xml set flag=MISSING
if NOT EXIST !FolderPath!!name!.pdf set flag=MISSING
)
echo Flag: !flag!
pause
endlocal
You should reformat your code and keep in mind that the grama for batch file is critical. BTW, if you are trying to update the existing batch variable and read it later, you should enable localdelayedexpansion and use ! instead of %.
Keep it simple:
#echo off
pushd "E:\TestBat\Test" || exit /B 1
for %%F in ("*.pdf") do if not exist "%%~nF.xml" echo %%~nxF
for %%F in ("*.xml") do if not exist "%%~nF.pdf" echo %%~nxF
popd
This returns all files that appear orphaned, that is, where the file with the same name but the other extension (.pdf, .xml) is missing. To implement a variable FLAG to indicate there are missing files, simply append & set "FLAG=missing" to each for line and ensure FLAG is empty initially. Then you can check it later by simply using if defined FLAG.
Note: This does not cover the e-mail notification issue. Since I do not know the BLAT tool you mentioned, I have no clue how you want to transfer the listed files to it (command line arguments, temporary file, or STDIN stream?).
In case there is a huge number of files in the target directory, another approach might be better in terms of performance, provided that the number of file system accesses is reduced drastically (note that the above script accesses the file system within the for loop body by if exist, hence for every iterated file individually). So here is an attempt relying on a temporary file and the findstr command:
#echo off
pushd "E:\TestBat\Test" || exit /B 1
rem // Return all orphaned `.pdf` files:
call :SUB "*.pdf" "*.xml"
rem // Return all orphaned `.xml` files:
call :SUB "*.xml" "*.pdf"
popd
exit /B
:SUB val_pattern_orphaned val_pattern_missing
set "LIST=%TEMP%\%~n0_%RANDOM%.tmp"
> "%LIST%" (
rem // Retrieve list of files with one extension:
for %%F in ("%~2") do (
rem /* Replace the extension by the other one,
rem then write the list to a temporary file;
rem this constitutes a list of expected files: */
echo(%%~nF%~x1
)
)
rem /* Search actual list of files with the other extension
rem for occurrences of the list of expected files and
rem return each item that does not match: */
dir /B /A:-D "%~1" | findstr /L /I /X /V /G:"%LIST%"
rem // Clean up the temporary file:
del "%LIST%"
exit /B
To understand how it works, let us concentrate on the first sub-routine call call :SUB "*.pdf" "*.xml" using an example; let us assume the target directory contains the following files:
AlOnE.xml
ExtrA.pdf
sAmplE.pdf
sAmplE.xml
So in the for loop a list of .xml files is gathered:
AlOnE.xml
sAmplE.xml
This is written to a temporary file but with the extensions .xml replaced by .pdf:
AlOnE.pdf
sAmplE.pdf
The next step is to generate a list of actually existing .pdf files:
ExtrA.pdf
sAmplE.pdf
This is piped into a findstr command line, that searches this list for search strings that are gathered from the temporary file, returning non-matching lines only. In other words, findstr returns only those lines of the input list that do not occur in the temporary file:
ExtrA.pdf
To finally get also orphaned .xml files, the second sub-routine call is needed.
Since this script uses a temporary file containing a file list which is processed once by findstr to find any orphaned files per extension, the overall number of file system access operations is lower. The weakest part however is the for loop (containing string concatenation operations).
My problem is that two FOR loops are working separately, but don't want to work one after another.
The goal is:
The first loop creates XML files and only when the creation has already been done the second loop starts and counts the size of created XML files and writes it into .txt file.
#echo off
Setlocal EnableDelayedExpansion
for /f %%a in ('dir /b /s C:\Users\NekhayenkoO\test\') do (
echo Verarbeite %%~na
jhove -m PDF-hul -h xml -o C:\Users\NekhayenkoO\outputxml\%%~na.xml %%a
)
for /f %%i in ('dir /b /s C:\Users\NekhayenkoO\outputxml\') do (
echo %%~ni %%~zi >> C:\Users\NekhayenkoO\outputxml\size.txt
)
pause
This question can be answered easily when knowing what jhove is.
So I searched in world wide web for jhove, found very quickly the homepage JHOVE | JSTOR/Harvard Object Validation Environment and downloaded also jhove-1_11.zip from SourceForge project page of JHOVE.
All this was done by me to find out that jhove is a Java application which is executed on Linux and perhaps also on Mac using the shell script jhove and on Windows the batch file jhove.bat for making it easier to use by users.
So Windows command interpreter searches in current directory and next in all directories specified in environment variable PATH for a file matching the file name pattern jhove.* having a file extension listed in environment variable PATHEXT because jhove.bat is specified without file extension and without path in the batch file.
But the execution of a batch file from within a batch file without usage of command CALL results in script execution of current batch file being continued in the other executed batch file without ever returning back to the current batch file.
For that reason Windows command interpreter runs into jhove.bat on first file found in directory C:\Users\NekhayenkoO\test and never comes back.
This behavior can be easily watched by using two simple batch files stored for example in C:\Temp.
Test1.bat:
#echo off
cd /D "%~dp0"
for %%I in (*.bat) do Test2.bat "%%I"
echo %~n0: Leaving %~f0
Test2.bat:
#echo %~n0: Arguments are: %*
#echo %~n0: Leaving %~f0
On running from within a command prompt window C:\Temp\Test1.bat the output is:
Test2: Arguments are: "Test1.bat"
Test2: Leaving C:\Temp\Test2.bat
The processing of Test1.bat was continued on Test2.bat without coming back to Test1.bat.
Now Test1.bat is modified to by inserting command CALL after do.
Test1.bat:
#echo off
cd /D "%~dp0"
for %%I in (*.bat) do call Test2.bat "%%I"
echo Leaving %~f0
The output on running Test1.bat from within command prompt window is now:
Test2: Arguments are: "Test1.bat"
Test2: Leaving C:\Temp\Test2.bat
Test2: Arguments are: "Test2.bat"
Test2: Leaving C:\Temp\Test2.bat
Test1: Leaving C:\Temp\Test1.bat
Batch file Test1.bat calls now batch file Test2.bat and therefore the FOR loop is really executed on all *.bat files found in directory of the two batch files.
Therefore the solution is using command CALL as suggested already by Squashman:
#echo off
setlocal EnableDelayedExpansion
for /f %%a in ('dir /b /s "%USERPROFILE%\test\" 2^>nul') do (
echo Verarbeite %%~na
call jhove.bat -m PDF-hul -h xml -o "%USERPROFILE%\outputxml\%%~na.xml" "%%a"
)
for /f %%i in ('dir /b /s "%USERPROFILE%\outputxml\" 2^>nul') do (
echo %%~ni %%~zi>>"%USERPROFILE%\outputxml\size.txt"
)
pause
endlocal
A reference to environment variable USERPROFILE is used instead of C:\Users\NekhayenkoO.
All file names are enclosed in double quotes in case of any file found in the directory contains a space character or any other special character which requires enclosing in double quotes.
And last 2>nul is added which redirects the error message output to handle STDERR by command DIR on not finding any file to device NUL to suppress it. The redirection operator > must be escaped here with ^ to be interpreted on execution of command DIR and not as wrong placed redirection operator on parsing already the command FOR.
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
call /?
cd /?
dir /?
echo /?
for /?
And read also the Microsoft article Using command redirection operators.
You need to use the START command with the /WAIT flag when you launch an external application.
I believe it would look something like this:
START /WAIT jhove -m PDF-hul -h xml -o C:\Users\NekhayenkoO\outputxml\%%~na.xml %%a
That should cause the batch file to pause and wait for the external application to finish before proceeding.
I have written the following .bat file, and it runs perfectly on my Windows 2000 machine, but will not run on my Windows 7 or Windows XP machines. Basically it just loops through the current directory and runs a checksum program which returns the checksum. The output of the program is saved to a text file and then formatted to remove the checksum of the output file.
#Echo Off
for /r %%f in (*.txt) do crc32sum.exe %%f >> all_checksums.txt
ren all_checksums.txt old.txt
findstr /v /e /c:"all_checksums.txt" old.txt > all_checksums.txt
del old.txt
When I run this file on my Win2k PC with a bunch of text files and the crc32sum.exe in a folder, it outputs the file. On other machines it outputs a blank file. I turned Echo on and kept only the for loop line and found that the output from executing the crc32sum.exe is nothing. If you manually run the crc32sum.exe file it outputs the checksum no problem.
Any ideas as to how to fix this?
EDIT: Here is a link to the software: http://www.di-mgt.com.au/src/digsum-1.0.1.zip
EDIT2: New development, it seems that the file works if the path of the folder has no spaces in it i.e. C:\temp or C:\inetpub\ftproot or C:\users\admin\Desktop\temp. Does anyone know how I can make this work with paths that have spaces? %%~f doesnt work it says unexpected.
Try this modified batch code which worked on Windows XP SP3 x86:
#echo off
goto CheckOutput
rem Command DEL does not terminate with an exit code greater 0
rem if the deletion of a file failed. Therefore the output to
rem stderr must be evaluated to find out if deletion was
rem successful or (for a single file) the file existence is
rem checked once again. For details read on Stack Overflow
rem the answer http://stackoverflow.com/a/33403497/3074564
rem The deletion of the file was successful if file created
rem from output message has size 0 and therefore the temp
rem file can be deleted and calculation of the CRC32 sums
rem can be started.
:DeleteOutput
del /F "all_checksums.txt" >nul 2>"%TEMP%\DelErrorMessage.tmp"
for %%E in ("%TEMP%\DelErrorMessage.tmp") do set "FileSize=%%~zE"
if "%FileSize%" == "0" (
set "FileSize="
del "%TEMP%\DelErrorMessage.tmp"
goto CalcCRC32
)
set "FileSize="
echo %~nx0: Failed to delete file %CD%\all_checksums.txt
echo.
type "%TEMP%\DelErrorMessage.tmp"
del "%TEMP%\DelErrorMessage.tmp"
echo.
echo Is this file opened in an application?
echo.
set "Retry=N"
set /P "Retry=Retry (N/Y)? "
if /I "%Retry%" == "Y" (
set "Retry="
cls
goto CheckOutput
)
set "Retry="
goto :EOF
:CheckOutput
if exist "all_checksums.txt" goto DeleteOutput
:CalcCRC32
for /R %%F in (*.txt) do (
if /I not "%%F" == "%CD%\all_checksums.txt" (
crc32sum.exe "%%F" >>"all_checksums.txt"
)
)
The output file in current directory is deleted if already existing from a previous run. Extra code is added to verify if deletion was successful and informing the user about a failed deletion with giving the user the possibility to retry after closing the file in an application if that is the reason why deletion failed.
The FOR command searches because of option /R recursive in current directory and all its subdirectories for files with extension txt. The name of each found file with full path always without double quotes is hold in loop variable F for any text file found in current directory or any subdirectory.
The CRC32 sum is calculated by 32-bit console application crc32sum in current directory for all text files found with the exception of the output file all_checksums.txt in current directory. The output of this small application is redirected into file all_checksums.txt with appending the single output line to this file.
It is necessary to enclose the file name with path in double quotes because even with no *.txt file containing a space character or one of the special characters &()[]{}^=;!'+,`~ in its name, the path of the file could contain a space or one of those characters.
For the files
C:\Temp\test 1.txt
C:\Temp\test 2.txt
C:\Temp\test_3.txt
C:\Temp\TEST\123-9.txt
C:\Temp\TEST\abc.txt
C:\Temp\TEST\hello.txt
C:\Temp\TEST\hellon.txt
C:\Temp\Test x\test4.txt
C:\Temp\Test x\test5.txt
the file C:\Temp\all_checksums.txt contains after batch execution:
f44271ac *test 1.txt
624cbdf9 *test 2.txt
7ce469eb *test_3.txt
cbf43926 *123-9.txt
352441c2 *abc.txt
0d4a1185 *hello.txt
38e6c41a *hellon.txt
1b4289fa *test4.txt
f44271ac *test5.txt
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
cls /?
del /?
echo /?
for /?
goto /?
if /?
rem /?
set /?
type /?
One of the help pages output on running for /? informs about %~I, %~fI, %~dI, %~pI, %~nI, %~xI, %~sI, %~aI, %~tI, %~zI.
Using in a batch file f (in lower case) as loop variable and referencing it with %%~f is a syntax error as command processor expects next the loop variable. %%~ff would be right, but could be different to %%~fI (name of a file/folder with full path and extension without quotes) in comparison to %%~I (string without surrounding quotes).
It is not advisable to use (those) small letters as loop variable. It is better to use upper case letters or character # as loop variable. The loop variable and also those modifiers are case sensitive while nearly everything else in a batch file is case insensitive.
INFO: assets.txt contains a list of cpu names which I can connect to over the network.
I need to copy this new .exe to well over 200+ computers and figured i could use the c$ admin share. This is really the only way I can do this without going to workstations individually or remoting in one by one.
This script works without the 'if exists' however I need to check if the directory exists before attempting the copy. I don't understand why it isn't working. I am also running this script using my domain administrative account.
#echo off
REM Pull Computer Asset Tags from file
for /F "tokens=*" %%A in (assets.txt) do (
echo Start Processing %%A
REM Temporarily set file path for existence check
set file=\\%%A\C$\Program Files\Intouch2\Intouch2ca.exe
if EXIST "%file%" (
REM Rename old .exe
ren "\\%%A\C$\Program Files\Intouch2\Intouch2ca.exe" "Intouch2ca.bak"
REM copy new .exe from server to cpu asset
xcopy "\\server\my dir\management\it\software\Intouch Upgrade\Intouch2ca.exe" "\\%%A\C$\Program Files\Intouch2\" /Y
echo END Processing %%A
echo.
echo ------------------------------------------------------------
echo.
)
)
I also haven't been able to get the error output to a log file.
I have tried this but it isnt exactly what I would like.
xcopy "\\server\my dir\management\it\software\Intouch Upgrade\Intouch2ca.exe" "\\%%A\C$\Program Files\Intouch2\" /Y 1>>errors.log 2>&1
How can I pretty that up so it only shows errors and lists the %%A where the error occured?
Thank you all in advance for your time.
Within a block statement (a parenthesised series of statements), the entire block is parsed and then executed. Any %var% within the block will be replaced by that variable's value at the time the block is parsed - before the block is executed.
Hence, in your case, file is being changed within the block, so the value cmd uses is its initial value when the entire for is parsed.
Solution 1: use \\%%A\C$\Program Files\Intouch2\Intouch2ca.exe in place of %file%
Solution 2: start your batch with setlocal enabledelayedexpansion on a separate line after the #echo off, then use !file! in place of %var%
Solution 3: call an internal routine to use the mofified value as %file%
Solution 4: Create the directory regardless. MD newname 2>nul will silently create a new directory if it doesn't already exist
An error on a copy will set an errorlevel and you can write a custom error message.
copy "\\server\my dir\management\it\software\Intouch Upgrade\Intouch2ca.exe" "\\%%A\C$\Program Files\Intouch2\" >nul 2>&1
if errorlevel 1 >> errors.txt echo "Error in %%A"