git is not installed or not in the PATH - windows

Windows, when I try to run npm install, it shows:
mean#1.0.0 postinstall E:\mean
node node_modules/grunt-cli/bin/grunt install
Running "bower:install" (bower) task
Fatal error : git is not installed or not in the PATH
npm ERR! weird error 1
npm ERR! not ok code 0
What is the problem? How to fix it?
The project git repository is https://github.com/linnovate/mean

Did you install Git correctly?
According to the Bower site, you need to make sure you check the option "Run Git from Windows Command Prompt".
I had this issue where Git was not found when I was trying to install Angular. I re-ran the installer for git and changed my setting and then it worked.
From the bower site:
http://bower.io/

while #vitocorleone is technically correct. If you have already installed, there is no need to reinstall. You just need to add it to your path. You will find yourself doing this for many of the tools for the mean stack so you should get used to doing it. You don't want to have to be in the folder that holds the executable to run it.
Control Panel --> System and Security --> System
click on Advanced System Settings on the left.
make sure you are on the advanced tab
click the Environment Variables button on the bottom
under system variables on the bottom find the Path variable
at the end of the line type (assuming this is where you installed it)
;C:\Program Files (x86)\git\cmd
click ok, ok, and ok to save
This essentially tells the OS.. if you don't find this executable in the folder I am typing in, look in Path to fide where it is.

Installing git and running npm install from git-bash worked for me. Make sure you are in the correct directory.

Install git and tortoise git for windows and make sure it is on your path, (the installer for Tortoise Git includes options for the command line tools and ensuring that it is on the path - select them).
You will need to close and re-open any existing command line sessions for the changes to take effect.
Then you should be able to run npm install successfully or move on to the next problem!

In my case the issue was not resolved because i did not restart my system. Please make sure you do restart your system.

If you installed GitHubDesktop then the path for git.exe will be ,
C:\Users\<'Username'>\AppData\Local\GitHubDesktop\app-1.1.1\resources\app\git\cmd
Add this path to the environment variables by following,
** (Note: \cmd at the end, not \cmd\git.exe).**
Navigate to the Environmental Variables Editor and find the Path variable in the “System Variables” section. Click Edit… and paste the URL of Git to the end. Save!
Now open a new cmd and type command git. If you are able to see the git usage then it's done.
Now you can execute your command to install your package.
ex: npm install native-base --save

Use Git CMD instead of using Win CMD.

I did install git and tried again and got the same error. But running 'npm install' in a new command prompt window worked for me. Restarting the machine is not required.

Go to Environmental Variables you will find this in Computer Properties->Advance system Setting->Environmental Variables -> Path
Add the path of your git installed int the system.
eg: "C:\Program Files\Git\cmd"
Save it.
Good to go now!!

The issue depends on the command prompt you are using. if you are using your Windows cmd, then it will be fine if you have installed git in your system (note that after installation it gets added to your system path). if you are running on an Anaconda terminal or any other, then you need to install git on your project environment from the terminal.
for anaconda, the problem gets solved by running:
conda install git

Related

How can I install npm in laravel 5.4?

When I use this command in command mode:
D:\xampp\htdocs\profileApp>npm run dev
I get this error:
'npm' is not recognized as an internal or external command, operable
program or batch file.
How can I solve this?
First of all, I assume you are a Windows user. In this case, you need to download and install NPM together with NodeJS from the official website. When installing, do not unselect the "Add to PATH variables" point. It's important that NPM is added to your PATH variables, so it's globally available.
After installing, simply restart your terminal(s)
Download and install Gitbash it will be used to run such commands. `
Git bash will help you emulate bash commands. Read this article with how to use git and npm on windows with Git Bash
First you need to install Node which comes with NPM bundled in so that it would be recognizable by Windows CMD you can download the latest version from the Official Website.
Optional : If you are willing to work on open source projects consider
installing Git for windows

ng is not recognized as an internal or external command

Running windows 7 Professional 32bit.
I tried running npm install -g angular-cli both under normal or admin.
I also tried adding it to the Enviorment Variables under PATH: (C:\Users\Administrator\AppData\Roaming\npm\node_modules\angular-cli\bin\ng) , with no success also.
What am i doing wrong?
I solved this problem in accordance with the figure:
run in cmd
npm install -g #angular/cli
and then
( open in Windows 10) Control Panel\All Control Panel Items\System
or accordance with the figure
step 1:
step 2 :
step3:
step4:
step5: add missing ng path
Here is new environment variable that you need add: C:\Users\PK\AppData\Roaming\npm\node_modules\#angular\cli\bin
Finally, restart all opened command prompts and try again.
For me it works with:
npm run ng <command>
Adding C:\Users\DELL\AppData\Roaming\npm to System Variable Path worked for me. Please find your appropriate file path to 'npm'
Also, check if you have added your angular-cli\bin path to the path variable.
I am using WIN 10, just figure it out for this problem.
Type the code below in cmd:
npm config get prefix
and copy&paste the path that you get it from the top into your computer environment variables-->user variables box --> path --> edit -- C:\Program Files\nodejs\node_global, your path may different.
Click Ok and reopen your cmd window, type in ng version, then it works! Cheers!
Just open your command prompt (run as administrator). Ensure node --v is 6.9.0 or higher and npm --v is 3.0.0 r higher.
After that run the following command:
npm install -g #angular/cli
Once angular is installed. you can see an entry of angular cli in the path
C:\Users\Dell\AppData\Roaming\npm\node_modules\#angular
Then try ng help. It will work.
1) Enter below command on command prompt
npm install -g #angular/cli
2) Make sure that C:\Users\_username_\AppData\Roaming\npm this path is not hidden.
3) Add C:\Users\_username_\AppData\Roaming\npm and
C:\Users\_username_\AppData\Roaming\npm \node_modules#angular\cli\bin to both enviroment variable path.
4) Open new command prompt and type ng help. It will work.
With a command
npm install -g #angular/cli#latest
It works fine, I am able to run ng command now.
I solved it few days ago, after having the same problem with other global modules, by adding to:
Environment Tables -> System variables -> Path:
C:\Users\Administrator\AppData\Roaming\npm\node_modules\angular-cli\bin;C:\Program Files\MongoDB\Server\3.2\bin
Note that it must not have any spaces after ;
That turned out to be my problem.
I followed below steps for resolution for this issue in Windows 10:
First make sure you have installed Angular CLI . You can use below
to install same.
npm install -g #angular/cli#latest
Make sure that AppData is visible and navigate to path below.
C:\Users\rkota\AppData\Roaming\npm
Same path can be found by running below too:
npm config get prefix
Add the above path i.e. " C:\Users\rkota\AppData\Roaming\npm" in Environment variable PATH and make sure it got added by running path in command prompt.
Close command prompt and now try to run below:
ng --version
you will be able to see CLI version.
execute following lines in order to solve the issue for both not found and undefined version of ng
npm uninstall -g angular-cli
npm uninstall --save-dev angular-cli
npm cache clean
npm install -g #angular/cli#latest
Instead of using the in-built command prompt better start using the NodeJS installed version of command prompt. Then it is going to work perfectly without any issues.
General problem is that OS tries to find the PATH variable with ng keyword and cannot find it.
For me, even after the steps #behrouzmoslem suggested in the top answers to this post I didn't manage to get it work, because after the launch of ng command OS started to respond, but opens up editor file by the path C:\Users\{username}\AppData\Roaming\npm\node_modules\#angular\cli\bin\ng which is actually funny. So, solution is:
Just use npx before any angular executables.
Eg : npx ng serve for serving the angular app or npx ng build --watch to build with watcher.
If you get the error even after following the above step. then try below.
Since it is a node script. I am using the below option to create as of now.
node C:\Users\Administrator\AppData\Roaming\npm\node_modules\angular-cli\bin\ng version
May be symbolic links are required. Not researched further.
On Further Research:
Set Path as : %PATH%;C:\Users\Administrator\AppData\Roaming\npm;
In Windows, npm.cmd file is in the above path. If the above Environment variable is set, you can execute as
ng version
ng init
Open cmd and type npm install -g #angular/cli
In environment variables, add either in the user variable or System variable "Path" value=C:\Users\your-user\.npm-packages\node_modules\.bin
In cmd: c:\>cd your-new-project-path
...\project-path\> ng new my-app
or ng all-ng-commands
I resolved by adding - %AppData%\npm\node_modules#angular\cli\bin\ path to my environment variables path
close cmd and open it again with admin right or reboot ur system.
for me it works only with the flag --force:
npm install -g #angular/cli --force
If everything is fine then you shoud see the folder node_modules in this path:
C:\Users\YOUR_USERNAME\AppData\Roaming\npm\
I faced same issue when i tried to install angular cli locally with command
npm install #angular/cli#latest
After that i got same issue
C:\Users\vi1kumar\Desktop\tus\ANGULAR\AngularForms>ng -v
'ng' is not recognized as an internal or external command,
operable program or batch file
Than i tried to install it globally
npm install -g #angular/cli#latest
In this case it worked I was wondering that is it not possible to install cli globally ?
After doing some research I found this article very helpful hope it will help someone facing similar issue
Working with multiple versions of Angular CLI
This one almost worked for me, but I had to use: %USERPROFILE%\AppData\Roaming\npm
. In Environment Variables.../System variables/Path
Then when I did CMD: "ng -v" I got the correct response for angular cli.
npm install -g #angular/cli helped for me instead of npm install #angular/cli
1- Install
$ npm install -g #angular/cli
2- Make sure where your ng.cmd is present.
3- Then add this path into variables.
I had the same problem on Windows 7, 64 bits running with npm v3.10.8.
I added the path as it was suggested: ( C:\Users.....(your user name)\AppData\Roaming\npm\node_modules\angular-cli\bin\ng) and uninstalled angular-cli.
After this, I cleared the npm cache by npm cache clean as prompted here https://blogs.msdn.microsoft.com/matt-harrington/2012/02/23/how-to-fix-node-js-npm-permission-problems/. This guarantees there are no leftovers.
Reinstalled angular-cli with npm install -g angular-cliand voila.
Hope that may be useful!
In my case I did below steps.
All Programs -> Node JS-> Right click on Node.js Command Prompt and select properties and from Target string at end copy below
/k "C:\Program Files\nodejs\nodevars.bat"
I launched Visual Studio Code and opened below file
C:\Users\gochinta\AppData\Roaming\Code\User\settings.json and gave below
// Place your settings in this file to overwrite the default settings
{
"terminal.integrated.shellArgs.windows":
["/k", "C:\\Program Files\\nodejs\\nodevars.bat"]
}
Now I typed ng -v in my Visual Studio Code Terminal window and it worked.
I was having the same issue when tried with the syntax "ng new " and solved that simply by updating the existing node version from 5.x.x to 8.x.x. After successful updation of node, the syntax worked perfectly for me. Please update the existing version of node. As it is clearly mentioned in angular documentation that these commands require the node version >= 6.9.x. For reference please check https://angular.io/guide/quickstart. It clearly states "Verify that you are running at least node 6.9.x and npm 3.x.x by running node -v and npm -v in a terminal/console window. Older versions produce errors, but newer versions are fine".
I faced same issue on x86, windows 7;
uninstalled #angular/cli
re-installed #angular/cli
checked & verified environmental variables (no problems there)...
Still same issue:
Solution was the .npmrc file at C:\Users{USERNAME}... change the prefix so that it reads "prefix=${APPDATA}\npm"... Thanks to this website for help in resolving it
For me something was wrong in the PATH enviroment variable. I removed all path related to npm and added at the start of PATH this folder:
c:\Users\<your-user-name>\AppData\Roaming\npm\
Make sure you have ; between paths.
I am facing same issue and it's get resolved. At my end reason is i install node and CLI using other user profile and now i am running ng command from other user login. Since node and cli installed using other user login node is not finding anything on C:\Users\<user name>\AppData\Roaming this path and that's why i am getting this error.
I run npm install -g #angular/cli command and restart my machine. Every thing is working fine.
Sometime in the future. Applicable to Windows 8.1 machine.
Run the following commands
npm install -g #angular/cli
Log out or restart your machine.
This should add the required env path, rather than doing it manually.
I also tried to play with cmd by setting environment variable path & etc, but simple answer is use nodejs command prompt.
So you no need to set environment variable path or anything. When you insalled nodejs it will give it's command prompt, by using that you us "ng" command, without any settings.
Since this question is still asked over and over again one year later I will post my answer here as well.
The clue (on Windows only) is to arrange the entries in the path variable right.
As the NPM wiki tells us:
Because the installer puts C:\Program Files (x86)\nodejs before C:\Users\\AppData\Roaming\npm on your PATH, it will always use version of npm installed with node instead of the version of npm you installed using npm -g install npm#<version>.
So your path variable will look something like:
…;C:\<path-to-node-installation>;%appdata%\npm;…
Now you have two possibilities:
Swap the two entries so it will look like
…;%appdata%\npm;C:\<path-to-node-installation>;…
This will load the npm version installed with npm (and not with node) and with the installed Angular CLI version.
If you (for whatever reason) like to use the npm version bundled with node, add the direct path to your global Angualr CLI version. After this your path variable should look like this: …;C:\Users\<username>\AppData\Roaming\npm\node_modules\#angular\cli;C:\<path-to-node-installation>;%appdata%\npm;…
or …;%appdata%\npm\node_modules\#angular\cli;C:\<path-to-node-installation>;%appdata%\npm;…
for the short form.
This worked for me since a while now.

How do I install Git for Windows software to a specific directory?

I have just downloaded the latest Git for Windows installer, v2.4. It appears to want to install to the standard Windows "Program files" (with-spaces-in-name) directory.
Since I have all my development code in a folder called (simply) "/bin" -- I want to see if there's a command line option or parameter to change the install directory.
In my case, these days I use a environment variable such as GIT_HOME for important software like git; so it would be useful if there was a way to apply that to things like git commands, etc once I have the program installed.
possibly related:
How do I change the directory in Git Bash with Git for Windows?
I also came across a few questions asking: "whereis git". That's answered above, however I take that as an indicator that others may want git somewhere else too.
To start the installer with a different installation path you can open a CMD terminal in the same directory as the installer executable and pass in an option parameter of /DIR="x:\dirname"
For instance, if you have version 2.17.0 for Windows 64bit and you want to install git to D:\git, you would run:
Git-2.17.0-64-bit.exe /DIR="D:\git"
The installer will launch as usual and you need to walk through the other options, but the install location will be the path specified.
Since I just ran into this problem because my SSD is filling up, I figured I'd share the solution I came to on Windows 11 with Git v. 2.37.2.
The best way I could figure was to uninstall Git, then in CMD Prompt use the suggested command from the Git website with an appended --location/ -l flag:
winget install --id Git.Git -e --source winget --location [drive:/directory]
where [drive:/directory] is your target for the install. Had no issues and verified it worked with a project.

firebase-tools "-bash: firebase: command not found"

Excited that Firebase's hosting is now out of beta. Trying to get going with with the firebase-tools package and I've successfully installed it:
npm install -g firebase-tools
Trying to run any tool fails with
-bash: firebase: command not found
I've tried putting the following command in my .bash_profile without any luck
export PATH=/usr/local/share/npm/bin:$PATH
Any ideas? Pretty new to the command line in general.
Thanks!
Run code below with terminal,
alias firebase="`npm config get prefix`/bin/firebase"
Installing firebase-tools globally did the trick for me :
npm install -g firebase-tools
You should add the npm bin folder to your bash PATH variable. To do that, run:
npm get prefix
And it should output something like /home/your-username/npm-global or /home/your-username/npm-packages.
Then in your ~/.bashrc or ~/.bash_profile (if you're in a Mac) file, add:
export PATH="/home/your-username/npm-global/bin:$PATH" # Add npm bin PATH
Note the "/bin" after the npm get prefix result.
#mklement0 That answer looks good, but I'm worried it will be intimidating to someone who is so new to the command line. So I'm going to cherry-pick the most relevant piece of it.
#cienki Run this command to see what you should be putting in that PATH prefix in your .bash_profile file:
npm get prefix
by chance if you are using macOS with m1 chip
arch -x86_64 npm i -g firebase-tools
assuming that you haven't set the PATH
export PATH="`npm config get prefix`/bin:$PATH"
That's all and enjoy
On macOS: Use
curl -sL firebase.tools | upgrade=true bash
It worked for me
firebase -V
Using Windows 10, Bash
This worked for me:
npm get prefix // to find Path which for me it was C:\Users\User\AppData\Roaming\npm
search "Environment Variables" which located in "System Properties".
Under "System Variables", find the PATH variable, select it, and click "Edit". Click "New" and add the path found with the "npm get prefix" command earlier (which was for me C:\Users\User\AppData\Roaming\npm)
Then click "Ok"
Restart Bash
firebase --version //to check firebase version
Bruno's answer did the trick, I only needed to add a dot at npm-global in Ubuntu in .bashrc:
export PATH="/home/your-username/.npm-global/bin:$PATH" # Add npm bin PATH
Below command works for me on terminal
curl -sL firebase.tools | upgrade=true bash
This command install firebase tool for me
After installing:
$ npm install -g firebase-tools
$ firebase init
-bash: firebase: command not found
"If you are getting the above output then follow the below steps:"
For Windows Users:
type this cmd :
$ npm get prefix
C:\Users\Jeet\AppData\Roaming\npm [this is the location]
Now you have to set in enviorenment variable -> (windows+r) -> sysdm.cpl -> Advanced(tab) -> Environment Variables
-> under the System Variables -> click on path -> edit -> C:\Users\Jeet\AppData\Roaming\npm [paste] the above location -> apply - ok - ok.
Restart your bash terminal
Thanks!!!
For Mac OS Sierra:
$ sudo npm install -g firebase-tools
To stop other Node process use $ ps aux | grep node
If needed to upgrade or install emulator - $ npm install -g #google-cloud/functions-emulator
Ready to go $ firebase --version
For anyone using MacOS Catalina 10.15.2 getting the bash PATH variable fixed the issue for me.
Run:
npm get prefix
Then run:
export PATH=/Users/userid/.npm-global/bin:$PATH
Note: I recently upgraded from my old High Sierra MacBook Pro, and was confused as well.
For anyone using nvm the error could arise because you are on a different nvm version than you were on when you first installed firebase tools globally. That's what it was for me. When I restarted webstorm nvm switched to a different version.
Run nvm list to check the version you are on and run nvm use x.x.x to switch to the right version where you installed firebase tools originally.
This worked for me on Mac (same thing the others have been posting above, just for Mac):
go to your home folder in Finder (named after your user name, in my case "macbook")
press cmd+shift+dot (will reveal hidden files)
go the .npm-global/bin folder and copy its path (Finder menu -> View -> Show Path Bar, right click on the bin folder in the path bar -> "Copy 'bin' as Pathname")
open Terminal (by default the home folder) and go nano ~/.bash_profile
at the top of the file add export PATH="<cmd+v>:$PATH" (will look similar to this: export PATH="/Users/macbook/.npm-global/bin:$PATH")
save .bash_profile changes and restart Terminal, firebase command should work now
if you installing firebase-tools using
yarn global add firebase-tools
i got same error then i got answer and execute this
export PATH="$(yarn global bin):$PATH"
and then i can do firebase login pretty well
I am on Linux and installing the package with admin privileges resolved the problem:
sudo npm i -g firebase-tools
Simply reinstall node.js. This worked for me and fire command was recognized.
You forgot sudo type this
sudo npm install -g firebase-tools
problem solved.
I know most answers work for all generic 'command not found' errors. Basically by manually setting PATH variable but there's an easier way for this specific problem relating 'firebase command not found':
Try this cURL command and it will fix this issue for good and will minimise any user errors.
Install the Firebase CLI using the automatic install script
Run the following cURL command (Mac or Windows):
curl -sL https://firebase.tools | bash
Source: https://firebase.google.com/docs/cli#install-cli-windows, https://firebase.google.com/docs/cli#install-cli-mac-linux
This is for updated mac mac Os Catalina(10.15.1+) & on zsh.
Go to Terminal (vim .zprofile)
add this export PATH="/Users/Your Username/.npm-global/bin:$PATH"
Works for me!
Faced the same issue, am a newbie backend guy.
Used npm install firebase-tools
It doesn't install and you can't run.
I tried looking at the forums and here's what worked for me:
sudo npm install -g firebase-tools.
Then it asks for Permissions when you firebase login.
Am using Ubuntu.
After trying pretty much everything, only one worked for me (I'm on MacOs Catalina):
Try the following in your terminal:
curl -sL https://firebase.tools | bash
This will check the OS of your machine and then install everything else automatically and properly.
The command is from the official Firebase Documentation.
https://stackoverflow.com/a/60474459/1245341
After installing
$ npm install -g firebase-tools
Note the directory where it istalled What I did was locate the directory where firebase was installed. In my case C:\usr\local then I copied the three firebase files. I also went into the node_modules folder and copied the firebase tools folder. Then I went to my app directory in file manager and pasted the firebase files, then created a new node_modules folder and pasted the firebase-tools folder.
Now go to your cmd and run
$ firebase init
It should work
I tried a lot of things from here and from other forums, but what ended up working for me (and this is more of a work-around) was to download the binary and then open it and it set up all the firebase stuff for me.
However, I found that if I moved it after opening it once, it did not work. So first move it to wherever you want to leave it and then run the .exe.
This allowed me to skip configuring the PATH variable which was nice.
I'm on a Windows 10 Pro Education. Hope this helps someone who has a similar struggle.
Adding to Durul Dalkanat's answer,
Assuming you have executed npm install firebase-tools -g
Firstly get the output of the command of npm get prefix.
Open .bashrc file which is in the home directory and add alias <output of npm get prefix>/bin/firebase at the end of the file.
Run source .bashrc in the home directory.
Enjoy!
The alias of firebase will be the actual firebase path in the main system and this solution should work flawlessly.
if you're windows 8 user, one possible solution is to put the PATH in environment variables manualy...
On the Windows desktop, right-click My Computer.
In the pop-up menu, click Properties.
In the System Properties window, click the Advanced tab, and then click Environment Variables.
In the System Variables window, highlight Path, and click Edit.
In the Edit System Variables window, insert the cursor at the end of the Variable value field.
If the last character is not a semi-colon (;), add one.
After the final semi-colon, type the full path to the file you want to find.
For me it was: C:\Users\ 'username' \AppData\Roaming\npm
To get your path put this string in you command line:
$ npm get prefix
Click OK in each open window
I tried all the answers above, other SO answers, and GitHub answers but nothing worked. The only thing that worked for me was to save whatever was inside my index.js file temporarily somewhere else, delete the entire cloud functions folder, then reinstall and start everything from the very beginning.
After many hours trying everything the only thing what helped (on windows) was downloading and installing node again.
I found a solution.
npm i express firebase-tools
If you are admin on your PC, installing firebase and firebase-tools with -g flag should resolve the issue (the path will added to the global PATH variable) but if you are an admin, you may have to add that path yourself.
Seeking help from one of the top answer, issue this command will return the path where firebase is installed
npm config get prefix /bin/firebase
In my case the following is returned.
C:\Users\*user_name*\AppData\Roaming\npm
Copy that path (from first line) and visit this page on how to update path variable (Window + x then visit systems > Advance Settings). Here add a new entry in path and past that path there. Firebase command should work from command prompt every time without the use of alias required.

How to install go-sql-driver on Windows

I am trying to install go-sql-driver on Windows Vista but I am having problems with GOPATH.
I installed git as suggested and added GOPATH as a new user environment in Windows with path C:/users/A/desktop/go.
I ran go get github.com/go-sql-driver/mysql in the command line but it gives me this error:
C:\>go get github.com/go-sql-driver/mysql
go: missing Git command. See http://golang.org/s/gogetcmd
package github.com/go-sql-driver/mysql: exec: "git": executable file not found in %PATH%
When I go look at http://golang.org/s/gogetcmd it merely says download git. But it is already downloaded in my machine.
I also went ahead and created a new environement variable for PATH and set its path to the directory where git was installed but that did not help either.
What am I doing wrong?
Download the Windows version of Git from http://git-scm.com/downloads.
Run the downloaded executable file, currently Git-1.8.3-preview20130601.exe, which will start a Git Setup wizard to install Git.
Check Git Setup Options
Run Git from the Windows Command Prompt
Checkout as-is, commit Unix-style line endings
Check the installation by running:
C:\>git --version
git version 1.8.3.msysgit.0
Make sure Git is in the %PATH% environment variable and ensure Git is installed. If you cannot run git --version in the command prompt, then the Git binary directory isn't listed in your %PATH%. Fix this by adding Git to the path, close the command prompt, and run git --version in a new command prompt. If you're still having issues, then you might be having other problems.
Install the GIT BASH desktop app in your Windows PC. The download link is here. Once installed, open the shell and type:
go get -u github.com/go-sql-driver/mysql
This will install driver for Golang's MySQL database package

Resources